mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 05:38:29 +07:00
1adb0850a1
Uwe Kleine-Koenig has some strange hardware where one of the shared interrupts can be asserted during boot before the appropriate driver loads. Requesting the shared irq line from another driver result in a spurious interrupt storm which finally disables the interrupt line. I have seen similar behaviour on resume before (the hardware does not work anymore so I can not verify). Change the spurious disable logic to increment the disable depth and mark the interrupt with an extra flag which allows us to reenable the interrupt when a new driver arrives which requests the same irq line. In the worst case this will disable the irq again via the spurious trap, but there is a decent chance that the new driver is the one which can handle the already asserted interrupt and makes the box usable again. Eric Biederman said further: This case also happens on a regular basis in kdump kernels where we deliberately don't shutdown the hardware before starting the new kernel. This patch should reduce the need for using irqpoll in that situation by a small amount. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-and-Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
599 lines
15 KiB
C
599 lines
15 KiB
C
/*
|
|
* linux/kernel/irq/manage.c
|
|
*
|
|
* Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
|
|
* Copyright (C) 2005-2006 Thomas Gleixner
|
|
*
|
|
* This file contains driver APIs to the irq subsystem.
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/random.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "internals.h"
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
/**
|
|
* synchronize_irq - wait for pending IRQ handlers (on other CPUs)
|
|
* @irq: interrupt number to wait for
|
|
*
|
|
* This function waits for any pending IRQ handlers for this interrupt
|
|
* to complete before returning. If you use this function while
|
|
* holding a resource the IRQ handler may need you will deadlock.
|
|
*
|
|
* This function may be called - with care - from IRQ context.
|
|
*/
|
|
void synchronize_irq(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
unsigned int status;
|
|
|
|
if (irq >= NR_IRQS)
|
|
return;
|
|
|
|
do {
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Wait until we're out of the critical section. This might
|
|
* give the wrong answer due to the lack of memory barriers.
|
|
*/
|
|
while (desc->status & IRQ_INPROGRESS)
|
|
cpu_relax();
|
|
|
|
/* Ok, that indicated we're done: double-check carefully. */
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
status = desc->status;
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
|
|
/* Oops, that failed? */
|
|
} while (status & IRQ_INPROGRESS);
|
|
}
|
|
EXPORT_SYMBOL(synchronize_irq);
|
|
|
|
/**
|
|
* irq_can_set_affinity - Check if the affinity of a given irq can be set
|
|
* @irq: Interrupt to check
|
|
*
|
|
*/
|
|
int irq_can_set_affinity(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
|
|
if (CHECK_IRQ_PER_CPU(desc->status) || !desc->chip ||
|
|
!desc->chip->set_affinity)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* irq_set_affinity - Set the irq affinity of a given irq
|
|
* @irq: Interrupt to set affinity
|
|
* @cpumask: cpumask
|
|
*
|
|
*/
|
|
int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
|
|
if (!desc->chip->set_affinity)
|
|
return -EINVAL;
|
|
|
|
set_balance_irq_affinity(irq, cpumask);
|
|
|
|
#ifdef CONFIG_GENERIC_PENDING_IRQ
|
|
set_pending_irq(irq, cpumask);
|
|
#else
|
|
desc->affinity = cpumask;
|
|
desc->chip->set_affinity(irq, cpumask);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
/**
|
|
* disable_irq_nosync - disable an irq without waiting
|
|
* @irq: Interrupt to disable
|
|
*
|
|
* Disable the selected interrupt line. Disables and Enables are
|
|
* nested.
|
|
* Unlike disable_irq(), this function does not ensure existing
|
|
* instances of the IRQ handler have completed before returning.
|
|
*
|
|
* This function may be called from IRQ context.
|
|
*/
|
|
void disable_irq_nosync(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
unsigned long flags;
|
|
|
|
if (irq >= NR_IRQS)
|
|
return;
|
|
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
if (!desc->depth++) {
|
|
desc->status |= IRQ_DISABLED;
|
|
desc->chip->disable(irq);
|
|
}
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(disable_irq_nosync);
|
|
|
|
/**
|
|
* disable_irq - disable an irq and wait for completion
|
|
* @irq: Interrupt to disable
|
|
*
|
|
* Disable the selected interrupt line. Enables and Disables are
|
|
* nested.
|
|
* This function waits for any pending IRQ handlers for this interrupt
|
|
* to complete before returning. If you use this function while
|
|
* holding a resource the IRQ handler may need you will deadlock.
|
|
*
|
|
* This function may be called - with care - from IRQ context.
|
|
*/
|
|
void disable_irq(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
|
|
if (irq >= NR_IRQS)
|
|
return;
|
|
|
|
disable_irq_nosync(irq);
|
|
if (desc->action)
|
|
synchronize_irq(irq);
|
|
}
|
|
EXPORT_SYMBOL(disable_irq);
|
|
|
|
static void __enable_irq(struct irq_desc *desc, unsigned int irq)
|
|
{
|
|
switch (desc->depth) {
|
|
case 0:
|
|
printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
|
|
WARN_ON(1);
|
|
break;
|
|
case 1: {
|
|
unsigned int status = desc->status & ~IRQ_DISABLED;
|
|
|
|
/* Prevent probing on this irq: */
|
|
desc->status = status | IRQ_NOPROBE;
|
|
check_irq_resend(desc, irq);
|
|
/* fall-through */
|
|
}
|
|
default:
|
|
desc->depth--;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* enable_irq - enable handling of an irq
|
|
* @irq: Interrupt to enable
|
|
*
|
|
* Undoes the effect of one call to disable_irq(). If this
|
|
* matches the last disable, processing of interrupts on this
|
|
* IRQ line is re-enabled.
|
|
*
|
|
* This function may be called from IRQ context.
|
|
*/
|
|
void enable_irq(unsigned int irq)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
unsigned long flags;
|
|
|
|
if (irq >= NR_IRQS)
|
|
return;
|
|
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
__enable_irq(desc, irq);
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(enable_irq);
|
|
|
|
/**
|
|
* set_irq_wake - control irq power management wakeup
|
|
* @irq: interrupt to control
|
|
* @on: enable/disable power management wakeup
|
|
*
|
|
* Enable/disable power management wakeup mode, which is
|
|
* disabled by default. Enables and disables must match,
|
|
* just as they match for non-wakeup mode support.
|
|
*
|
|
* Wakeup mode lets this IRQ wake the system from sleep
|
|
* states like "suspend to RAM".
|
|
*/
|
|
int set_irq_wake(unsigned int irq, unsigned int on)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
unsigned long flags;
|
|
int ret = -ENXIO;
|
|
int (*set_wake)(unsigned, unsigned) = desc->chip->set_wake;
|
|
|
|
/* wakeup-capable irqs can be shared between drivers that
|
|
* don't need to have the same sleep mode behaviors.
|
|
*/
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
if (on) {
|
|
if (desc->wake_depth++ == 0)
|
|
desc->status |= IRQ_WAKEUP;
|
|
else
|
|
set_wake = NULL;
|
|
} else {
|
|
if (desc->wake_depth == 0) {
|
|
printk(KERN_WARNING "Unbalanced IRQ %d "
|
|
"wake disable\n", irq);
|
|
WARN_ON(1);
|
|
} else if (--desc->wake_depth == 0)
|
|
desc->status &= ~IRQ_WAKEUP;
|
|
else
|
|
set_wake = NULL;
|
|
}
|
|
if (set_wake)
|
|
ret = desc->chip->set_wake(irq, on);
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(set_irq_wake);
|
|
|
|
/*
|
|
* Internal function that tells the architecture code whether a
|
|
* particular irq has been exclusively allocated or is available
|
|
* for driver use.
|
|
*/
|
|
int can_request_irq(unsigned int irq, unsigned long irqflags)
|
|
{
|
|
struct irqaction *action;
|
|
|
|
if (irq >= NR_IRQS || irq_desc[irq].status & IRQ_NOREQUEST)
|
|
return 0;
|
|
|
|
action = irq_desc[irq].action;
|
|
if (action)
|
|
if (irqflags & action->flags & IRQF_SHARED)
|
|
action = NULL;
|
|
|
|
return !action;
|
|
}
|
|
|
|
void compat_irq_chip_set_default_handler(struct irq_desc *desc)
|
|
{
|
|
/*
|
|
* If the architecture still has not overriden
|
|
* the flow handler then zap the default. This
|
|
* should catch incorrect flow-type setting.
|
|
*/
|
|
if (desc->handle_irq == &handle_bad_irq)
|
|
desc->handle_irq = NULL;
|
|
}
|
|
|
|
/*
|
|
* Internal function to register an irqaction - typically used to
|
|
* allocate special interrupts that are part of the architecture.
|
|
*/
|
|
int setup_irq(unsigned int irq, struct irqaction *new)
|
|
{
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
struct irqaction *old, **p;
|
|
const char *old_name = NULL;
|
|
unsigned long flags;
|
|
int shared = 0;
|
|
|
|
if (irq >= NR_IRQS)
|
|
return -EINVAL;
|
|
|
|
if (desc->chip == &no_irq_chip)
|
|
return -ENOSYS;
|
|
/*
|
|
* Some drivers like serial.c use request_irq() heavily,
|
|
* so we have to be careful not to interfere with a
|
|
* running system.
|
|
*/
|
|
if (new->flags & IRQF_SAMPLE_RANDOM) {
|
|
/*
|
|
* This function might sleep, we want to call it first,
|
|
* outside of the atomic block.
|
|
* Yes, this might clear the entropy pool if the wrong
|
|
* driver is attempted to be loaded, without actually
|
|
* installing a new handler, but is this really a problem,
|
|
* only the sysadmin is able to do this.
|
|
*/
|
|
rand_initialize_irq(irq);
|
|
}
|
|
|
|
/*
|
|
* The following block of code has to be executed atomically
|
|
*/
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
p = &desc->action;
|
|
old = *p;
|
|
if (old) {
|
|
/*
|
|
* Can't share interrupts unless both agree to and are
|
|
* the same type (level, edge, polarity). So both flag
|
|
* fields must have IRQF_SHARED set and the bits which
|
|
* set the trigger type must match.
|
|
*/
|
|
if (!((old->flags & new->flags) & IRQF_SHARED) ||
|
|
((old->flags ^ new->flags) & IRQF_TRIGGER_MASK)) {
|
|
old_name = old->name;
|
|
goto mismatch;
|
|
}
|
|
|
|
#if defined(CONFIG_IRQ_PER_CPU)
|
|
/* All handlers must agree on per-cpuness */
|
|
if ((old->flags & IRQF_PERCPU) !=
|
|
(new->flags & IRQF_PERCPU))
|
|
goto mismatch;
|
|
#endif
|
|
|
|
/* add new interrupt at end of irq queue */
|
|
do {
|
|
p = &old->next;
|
|
old = *p;
|
|
} while (old);
|
|
shared = 1;
|
|
}
|
|
|
|
*p = new;
|
|
|
|
/* Exclude IRQ from balancing */
|
|
if (new->flags & IRQF_NOBALANCING)
|
|
desc->status |= IRQ_NO_BALANCING;
|
|
|
|
if (!shared) {
|
|
irq_chip_set_defaults(desc->chip);
|
|
|
|
#if defined(CONFIG_IRQ_PER_CPU)
|
|
if (new->flags & IRQF_PERCPU)
|
|
desc->status |= IRQ_PER_CPU;
|
|
#endif
|
|
|
|
/* Setup the type (level, edge polarity) if configured: */
|
|
if (new->flags & IRQF_TRIGGER_MASK) {
|
|
if (desc->chip && desc->chip->set_type)
|
|
desc->chip->set_type(irq,
|
|
new->flags & IRQF_TRIGGER_MASK);
|
|
else
|
|
/*
|
|
* IRQF_TRIGGER_* but the PIC does not support
|
|
* multiple flow-types?
|
|
*/
|
|
printk(KERN_WARNING "No IRQF_TRIGGER set_type "
|
|
"function for IRQ %d (%s)\n", irq,
|
|
desc->chip ? desc->chip->name :
|
|
"unknown");
|
|
} else
|
|
compat_irq_chip_set_default_handler(desc);
|
|
|
|
desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
|
|
IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
|
|
|
|
if (!(desc->status & IRQ_NOAUTOEN)) {
|
|
desc->depth = 0;
|
|
desc->status &= ~IRQ_DISABLED;
|
|
if (desc->chip->startup)
|
|
desc->chip->startup(irq);
|
|
else
|
|
desc->chip->enable(irq);
|
|
} else
|
|
/* Undo nested disables: */
|
|
desc->depth = 1;
|
|
}
|
|
/* Reset broken irq detection when installing new handler */
|
|
desc->irq_count = 0;
|
|
desc->irqs_unhandled = 0;
|
|
|
|
/*
|
|
* Check whether we disabled the irq via the spurious handler
|
|
* before. Reenable it and give it another chance.
|
|
*/
|
|
if (shared && (desc->status & IRQ_SPURIOUS_DISABLED)) {
|
|
desc->status &= ~IRQ_SPURIOUS_DISABLED;
|
|
__enable_irq(desc, irq);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
|
|
new->irq = irq;
|
|
register_irq_proc(irq);
|
|
new->dir = NULL;
|
|
register_handler_proc(irq, new);
|
|
|
|
return 0;
|
|
|
|
mismatch:
|
|
#ifdef CONFIG_DEBUG_SHIRQ
|
|
if (!(new->flags & IRQF_PROBE_SHARED)) {
|
|
printk(KERN_ERR "IRQ handler type mismatch for IRQ %d\n", irq);
|
|
if (old_name)
|
|
printk(KERN_ERR "current handler: %s\n", old_name);
|
|
dump_stack();
|
|
}
|
|
#endif
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/**
|
|
* free_irq - free an interrupt
|
|
* @irq: Interrupt line to free
|
|
* @dev_id: Device identity to free
|
|
*
|
|
* Remove an interrupt handler. The handler is removed and if the
|
|
* interrupt line is no longer in use by any driver it is disabled.
|
|
* On a shared IRQ the caller must ensure the interrupt is disabled
|
|
* on the card it drives before calling this function. The function
|
|
* does not return until any executing interrupts for this IRQ
|
|
* have completed.
|
|
*
|
|
* This function must not be called from interrupt context.
|
|
*/
|
|
void free_irq(unsigned int irq, void *dev_id)
|
|
{
|
|
struct irq_desc *desc;
|
|
struct irqaction **p;
|
|
unsigned long flags;
|
|
|
|
WARN_ON(in_interrupt());
|
|
if (irq >= NR_IRQS)
|
|
return;
|
|
|
|
desc = irq_desc + irq;
|
|
spin_lock_irqsave(&desc->lock, flags);
|
|
p = &desc->action;
|
|
for (;;) {
|
|
struct irqaction *action = *p;
|
|
|
|
if (action) {
|
|
struct irqaction **pp = p;
|
|
|
|
p = &action->next;
|
|
if (action->dev_id != dev_id)
|
|
continue;
|
|
|
|
/* Found it - now remove it from the list of entries */
|
|
*pp = action->next;
|
|
|
|
/* Currently used only by UML, might disappear one day.*/
|
|
#ifdef CONFIG_IRQ_RELEASE_METHOD
|
|
if (desc->chip->release)
|
|
desc->chip->release(irq, dev_id);
|
|
#endif
|
|
|
|
if (!desc->action) {
|
|
desc->status |= IRQ_DISABLED;
|
|
if (desc->chip->shutdown)
|
|
desc->chip->shutdown(irq);
|
|
else
|
|
desc->chip->disable(irq);
|
|
}
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
unregister_handler_proc(irq, action);
|
|
|
|
/* Make sure it's not being used on another CPU */
|
|
synchronize_irq(irq);
|
|
#ifdef CONFIG_DEBUG_SHIRQ
|
|
/*
|
|
* It's a shared IRQ -- the driver ought to be
|
|
* prepared for it to happen even now it's
|
|
* being freed, so let's make sure.... We do
|
|
* this after actually deregistering it, to
|
|
* make sure that a 'real' IRQ doesn't run in
|
|
* parallel with our fake
|
|
*/
|
|
if (action->flags & IRQF_SHARED) {
|
|
local_irq_save(flags);
|
|
action->handler(irq, dev_id);
|
|
local_irq_restore(flags);
|
|
}
|
|
#endif
|
|
kfree(action);
|
|
return;
|
|
}
|
|
printk(KERN_ERR "Trying to free already-free IRQ %d\n", irq);
|
|
#ifdef CONFIG_DEBUG_SHIRQ
|
|
dump_stack();
|
|
#endif
|
|
spin_unlock_irqrestore(&desc->lock, flags);
|
|
return;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(free_irq);
|
|
|
|
/**
|
|
* request_irq - allocate an interrupt line
|
|
* @irq: Interrupt line to allocate
|
|
* @handler: Function to be called when the IRQ occurs
|
|
* @irqflags: Interrupt type flags
|
|
* @devname: An ascii name for the claiming device
|
|
* @dev_id: A cookie passed back to the handler function
|
|
*
|
|
* This call allocates interrupt resources and enables the
|
|
* interrupt line and IRQ handling. From the point this
|
|
* call is made your handler function may be invoked. Since
|
|
* your handler function must clear any interrupt the board
|
|
* raises, you must take care both to initialise your hardware
|
|
* and to set up the interrupt handler in the right order.
|
|
*
|
|
* Dev_id must be globally unique. Normally the address of the
|
|
* device data structure is used as the cookie. Since the handler
|
|
* receives this value it makes sense to use it.
|
|
*
|
|
* If your interrupt is shared you must pass a non NULL dev_id
|
|
* as this is required when freeing the interrupt.
|
|
*
|
|
* Flags:
|
|
*
|
|
* IRQF_SHARED Interrupt is shared
|
|
* IRQF_DISABLED Disable local interrupts while processing
|
|
* IRQF_SAMPLE_RANDOM The interrupt can be used for entropy
|
|
*
|
|
*/
|
|
int request_irq(unsigned int irq, irq_handler_t handler,
|
|
unsigned long irqflags, const char *devname, void *dev_id)
|
|
{
|
|
struct irqaction *action;
|
|
int retval;
|
|
|
|
#ifdef CONFIG_LOCKDEP
|
|
/*
|
|
* Lockdep wants atomic interrupt handlers:
|
|
*/
|
|
irqflags |= IRQF_DISABLED;
|
|
#endif
|
|
/*
|
|
* Sanity-check: shared interrupts must pass in a real dev-ID,
|
|
* otherwise we'll have trouble later trying to figure out
|
|
* which interrupt is which (messes up the interrupt freeing
|
|
* logic etc).
|
|
*/
|
|
if ((irqflags & IRQF_SHARED) && !dev_id)
|
|
return -EINVAL;
|
|
if (irq >= NR_IRQS)
|
|
return -EINVAL;
|
|
if (irq_desc[irq].status & IRQ_NOREQUEST)
|
|
return -EINVAL;
|
|
if (!handler)
|
|
return -EINVAL;
|
|
|
|
action = kmalloc(sizeof(struct irqaction), GFP_ATOMIC);
|
|
if (!action)
|
|
return -ENOMEM;
|
|
|
|
action->handler = handler;
|
|
action->flags = irqflags;
|
|
cpus_clear(action->mask);
|
|
action->name = devname;
|
|
action->next = NULL;
|
|
action->dev_id = dev_id;
|
|
|
|
select_smp_affinity(irq);
|
|
|
|
#ifdef CONFIG_DEBUG_SHIRQ
|
|
if (irqflags & IRQF_SHARED) {
|
|
/*
|
|
* It's a shared IRQ -- the driver ought to be prepared for it
|
|
* to happen immediately, so let's make sure....
|
|
* We do this before actually registering it, to make sure that
|
|
* a 'real' IRQ doesn't run in parallel with our fake
|
|
*/
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
handler(irq, dev_id);
|
|
local_irq_restore(flags);
|
|
}
|
|
#endif
|
|
|
|
retval = setup_irq(irq, action);
|
|
if (retval)
|
|
kfree(action);
|
|
|
|
return retval;
|
|
}
|
|
EXPORT_SYMBOL(request_irq);
|