linux_dsm_epyc7002/arch/powerpc/kvm/book3s_xive_template.c
Benjamin Herrenschmidt d222af0723 KVM: PPC: Book3S HV: Don't access XIVE PIPR register using byte accesses
The XIVE interrupt controller on POWER9 machines doesn't support byte
accesses to any register in the thread management area other than the
CPPR (current processor priority register).  In particular, when
reading the PIPR (pending interrupt priority register), we need to
do a 32-bit or 64-bit load.

Cc: stable@vger.kernel.org # v4.13
Fixes: 2c4fb78f78 ("KVM: PPC: Book3S HV: Workaround POWER9 DD1.0 bug causing IPB bit loss")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-09-12 16:02:07 +10:00

567 lines
14 KiB
C

/*
* Copyright 2017 Benjamin Herrenschmidt, IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*/
/* File to be included by other .c files */
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
static void GLUE(X_PFX,ack_pending)(struct kvmppc_xive_vcpu *xc)
{
u8 cppr;
u16 ack;
/*
* Ensure any previous store to CPPR is ordered vs.
* the subsequent loads from PIPR or ACK.
*/
eieio();
/*
* DD1 bug workaround: If PIPR is less favored than CPPR
* ignore the interrupt or we might incorrectly lose an IPB
* bit.
*/
if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
__be64 qw1 = __x_readq(__x_tima + TM_QW1_OS);
u8 pipr = be64_to_cpu(qw1) & 0xff;
if (pipr >= xc->hw_cppr)
return;
}
/* Perform the acknowledge OS to register cycle. */
ack = be16_to_cpu(__x_readw(__x_tima + TM_SPC_ACK_OS_REG));
/* Synchronize subsequent queue accesses */
mb();
/* XXX Check grouping level */
/* Anything ? */
if (!((ack >> 8) & TM_QW1_NSR_EO))
return;
/* Grab CPPR of the most favored pending interrupt */
cppr = ack & 0xff;
if (cppr < 8)
xc->pending |= 1 << cppr;
#ifdef XIVE_RUNTIME_CHECKS
/* Check consistency */
if (cppr >= xc->hw_cppr)
pr_warn("KVM-XIVE: CPU %d odd ack CPPR, got %d at %d\n",
smp_processor_id(), cppr, xc->hw_cppr);
#endif
/*
* Update our image of the HW CPPR. We don't yet modify
* xc->cppr, this will be done as we scan for interrupts
* in the queues.
*/
xc->hw_cppr = cppr;
}
static u8 GLUE(X_PFX,esb_load)(struct xive_irq_data *xd, u32 offset)
{
u64 val;
if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
offset |= offset << 4;
val =__x_readq(__x_eoi_page(xd) + offset);
#ifdef __LITTLE_ENDIAN__
val >>= 64-8;
#endif
return (u8)val;
}
static void GLUE(X_PFX,source_eoi)(u32 hw_irq, struct xive_irq_data *xd)
{
/* If the XIVE supports the new "store EOI facility, use it */
if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
__x_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI);
else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
opal_int_eoi(hw_irq);
} else {
uint64_t eoi_val;
/*
* Otherwise for EOI, we use the special MMIO that does
* a clear of both P and Q and returns the old Q,
* except for LSIs where we use the "EOI cycle" special
* load.
*
* This allows us to then do a re-trigger if Q was set
* rather than synthetizing an interrupt in software
*
* For LSIs, using the HW EOI cycle works around a problem
* on P9 DD1 PHBs where the other ESB accesses don't work
* properly.
*/
if (xd->flags & XIVE_IRQ_FLAG_LSI)
__x_readq(__x_eoi_page(xd) + XIVE_ESB_LOAD_EOI);
else {
eoi_val = GLUE(X_PFX,esb_load)(xd, XIVE_ESB_SET_PQ_00);
/* Re-trigger if needed */
if ((eoi_val & 1) && __x_trig_page(xd))
__x_writeq(0, __x_trig_page(xd));
}
}
}
enum {
scan_fetch,
scan_poll,
scan_eoi,
};
static u32 GLUE(X_PFX,scan_interrupts)(struct kvmppc_xive_vcpu *xc,
u8 pending, int scan_type)
{
u32 hirq = 0;
u8 prio = 0xff;
/* Find highest pending priority */
while ((xc->mfrr != 0xff || pending != 0) && hirq == 0) {
struct xive_q *q;
u32 idx, toggle;
__be32 *qpage;
/*
* If pending is 0 this will return 0xff which is what
* we want
*/
prio = ffs(pending) - 1;
/*
* If the most favoured prio we found pending is less
* favored (or equal) than a pending IPI, we return
* the IPI instead.
*
* Note: If pending was 0 and mfrr is 0xff, we will
* not spurriously take an IPI because mfrr cannot
* then be smaller than cppr.
*/
if (prio >= xc->mfrr && xc->mfrr < xc->cppr) {
prio = xc->mfrr;
hirq = XICS_IPI;
break;
}
/* Don't scan past the guest cppr */
if (prio >= xc->cppr || prio > 7)
break;
/* Grab queue and pointers */
q = &xc->queues[prio];
idx = q->idx;
toggle = q->toggle;
/*
* Snapshot the queue page. The test further down for EOI
* must use the same "copy" that was used by __xive_read_eq
* since qpage can be set concurrently and we don't want
* to miss an EOI.
*/
qpage = READ_ONCE(q->qpage);
skip_ipi:
/*
* Try to fetch from the queue. Will return 0 for a
* non-queueing priority (ie, qpage = 0).
*/
hirq = __xive_read_eq(qpage, q->msk, &idx, &toggle);
/*
* If this was a signal for an MFFR change done by
* H_IPI we skip it. Additionally, if we were fetching
* we EOI it now, thus re-enabling reception of a new
* such signal.
*
* We also need to do that if prio is 0 and we had no
* page for the queue. In this case, we have non-queued
* IPI that needs to be EOId.
*
* This is safe because if we have another pending MFRR
* change that wasn't observed above, the Q bit will have
* been set and another occurrence of the IPI will trigger.
*/
if (hirq == XICS_IPI || (prio == 0 && !qpage)) {
if (scan_type == scan_fetch)
GLUE(X_PFX,source_eoi)(xc->vp_ipi,
&xc->vp_ipi_data);
/* Loop back on same queue with updated idx/toggle */
#ifdef XIVE_RUNTIME_CHECKS
WARN_ON(hirq && hirq != XICS_IPI);
#endif
if (hirq)
goto skip_ipi;
}
/* If fetching, update queue pointers */
if (scan_type == scan_fetch) {
q->idx = idx;
q->toggle = toggle;
}
/* Something found, stop searching */
if (hirq)
break;
/* Clear the pending bit on the now empty queue */
pending &= ~(1 << prio);
/*
* Check if the queue count needs adjusting due to
* interrupts being moved away.
*/
if (atomic_read(&q->pending_count)) {
int p = atomic_xchg(&q->pending_count, 0);
if (p) {
#ifdef XIVE_RUNTIME_CHECKS
WARN_ON(p > atomic_read(&q->count));
#endif
atomic_sub(p, &q->count);
}
}
}
/* If we are just taking a "peek", do nothing else */
if (scan_type == scan_poll)
return hirq;
/* Update the pending bits */
xc->pending = pending;
/*
* If this is an EOI that's it, no CPPR adjustment done here,
* all we needed was cleanup the stale pending bits and check
* if there's anything left.
*/
if (scan_type == scan_eoi)
return hirq;
/*
* If we found an interrupt, adjust what the guest CPPR should
* be as if we had just fetched that interrupt from HW.
*
* Note: This can only make xc->cppr smaller as the previous
* loop will only exit with hirq != 0 if prio is lower than
* the current xc->cppr. Thus we don't need to re-check xc->mfrr
* for pending IPIs.
*/
if (hirq)
xc->cppr = prio;
/*
* If it was an IPI the HW CPPR might have been lowered too much
* as the HW interrupt we use for IPIs is routed to priority 0.
*
* We re-sync it here.
*/
if (xc->cppr != xc->hw_cppr) {
xc->hw_cppr = xc->cppr;
__x_writeb(xc->cppr, __x_tima + TM_QW1_OS + TM_CPPR);
}
return hirq;
}
X_STATIC unsigned long GLUE(X_PFX,h_xirr)(struct kvm_vcpu *vcpu)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
u8 old_cppr;
u32 hirq;
pr_devel("H_XIRR\n");
xc->GLUE(X_STAT_PFX,h_xirr)++;
/* First collect pending bits from HW */
GLUE(X_PFX,ack_pending)(xc);
/*
* Cleanup the old-style bits if needed (they may have been
* set by pull or an escalation interrupts).
*/
if (test_bit(BOOK3S_IRQPRIO_EXTERNAL, &vcpu->arch.pending_exceptions))
clear_bit(BOOK3S_IRQPRIO_EXTERNAL_LEVEL,
&vcpu->arch.pending_exceptions);
pr_devel(" new pending=0x%02x hw_cppr=%d cppr=%d\n",
xc->pending, xc->hw_cppr, xc->cppr);
/* Grab previous CPPR and reverse map it */
old_cppr = xive_prio_to_guest(xc->cppr);
/* Scan for actual interrupts */
hirq = GLUE(X_PFX,scan_interrupts)(xc, xc->pending, scan_fetch);
pr_devel(" got hirq=0x%x hw_cppr=%d cppr=%d\n",
hirq, xc->hw_cppr, xc->cppr);
#ifdef XIVE_RUNTIME_CHECKS
/* That should never hit */
if (hirq & 0xff000000)
pr_warn("XIVE: Weird guest interrupt number 0x%08x\n", hirq);
#endif
/*
* XXX We could check if the interrupt is masked here and
* filter it. If we chose to do so, we would need to do:
*
* if (masked) {
* lock();
* if (masked) {
* old_Q = true;
* hirq = 0;
* }
* unlock();
* }
*/
/* Return interrupt and old CPPR in GPR4 */
vcpu->arch.gpr[4] = hirq | (old_cppr << 24);
return H_SUCCESS;
}
X_STATIC unsigned long GLUE(X_PFX,h_ipoll)(struct kvm_vcpu *vcpu, unsigned long server)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
u8 pending = xc->pending;
u32 hirq;
pr_devel("H_IPOLL(server=%ld)\n", server);
xc->GLUE(X_STAT_PFX,h_ipoll)++;
/* Grab the target VCPU if not the current one */
if (xc->server_num != server) {
vcpu = kvmppc_xive_find_server(vcpu->kvm, server);
if (!vcpu)
return H_PARAMETER;
xc = vcpu->arch.xive_vcpu;
/* Scan all priorities */
pending = 0xff;
} else {
/* Grab pending interrupt if any */
__be64 qw1 = __x_readq(__x_tima + TM_QW1_OS);
u8 pipr = be64_to_cpu(qw1) & 0xff;
if (pipr < 8)
pending |= 1 << pipr;
}
hirq = GLUE(X_PFX,scan_interrupts)(xc, pending, scan_poll);
/* Return interrupt and old CPPR in GPR4 */
vcpu->arch.gpr[4] = hirq | (xc->cppr << 24);
return H_SUCCESS;
}
static void GLUE(X_PFX,push_pending_to_hw)(struct kvmppc_xive_vcpu *xc)
{
u8 pending, prio;
pending = xc->pending;
if (xc->mfrr != 0xff) {
if (xc->mfrr < 8)
pending |= 1 << xc->mfrr;
else
pending |= 0x80;
}
if (!pending)
return;
prio = ffs(pending) - 1;
__x_writeb(prio, __x_tima + TM_SPC_SET_OS_PENDING);
}
X_STATIC int GLUE(X_PFX,h_cppr)(struct kvm_vcpu *vcpu, unsigned long cppr)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
u8 old_cppr;
pr_devel("H_CPPR(cppr=%ld)\n", cppr);
xc->GLUE(X_STAT_PFX,h_cppr)++;
/* Map CPPR */
cppr = xive_prio_from_guest(cppr);
/* Remember old and update SW state */
old_cppr = xc->cppr;
xc->cppr = cppr;
/*
* Order the above update of xc->cppr with the subsequent
* read of xc->mfrr inside push_pending_to_hw()
*/
smp_mb();
/*
* We are masking less, we need to look for pending things
* to deliver and set VP pending bits accordingly to trigger
* a new interrupt otherwise we might miss MFRR changes for
* which we have optimized out sending an IPI signal.
*/
if (cppr > old_cppr)
GLUE(X_PFX,push_pending_to_hw)(xc);
/* Apply new CPPR */
xc->hw_cppr = cppr;
__x_writeb(cppr, __x_tima + TM_QW1_OS + TM_CPPR);
return H_SUCCESS;
}
X_STATIC int GLUE(X_PFX,h_eoi)(struct kvm_vcpu *vcpu, unsigned long xirr)
{
struct kvmppc_xive *xive = vcpu->kvm->arch.xive;
struct kvmppc_xive_src_block *sb;
struct kvmppc_xive_irq_state *state;
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
struct xive_irq_data *xd;
u8 new_cppr = xirr >> 24;
u32 irq = xirr & 0x00ffffff, hw_num;
u16 src;
int rc = 0;
pr_devel("H_EOI(xirr=%08lx)\n", xirr);
xc->GLUE(X_STAT_PFX,h_eoi)++;
xc->cppr = xive_prio_from_guest(new_cppr);
/*
* IPIs are synthetized from MFRR and thus don't need
* any special EOI handling. The underlying interrupt
* used to signal MFRR changes is EOId when fetched from
* the queue.
*/
if (irq == XICS_IPI || irq == 0) {
/*
* This barrier orders the setting of xc->cppr vs.
* subsquent test of xc->mfrr done inside
* scan_interrupts and push_pending_to_hw
*/
smp_mb();
goto bail;
}
/* Find interrupt source */
sb = kvmppc_xive_find_source(xive, irq, &src);
if (!sb) {
pr_devel(" source not found !\n");
rc = H_PARAMETER;
/* Same as above */
smp_mb();
goto bail;
}
state = &sb->irq_state[src];
kvmppc_xive_select_irq(state, &hw_num, &xd);
state->in_eoi = true;
/*
* This barrier orders both setting of in_eoi above vs,
* subsequent test of guest_priority, and the setting
* of xc->cppr vs. subsquent test of xc->mfrr done inside
* scan_interrupts and push_pending_to_hw
*/
smp_mb();
again:
if (state->guest_priority == MASKED) {
arch_spin_lock(&sb->lock);
if (state->guest_priority != MASKED) {
arch_spin_unlock(&sb->lock);
goto again;
}
pr_devel(" EOI on saved P...\n");
/* Clear old_p, that will cause unmask to perform an EOI */
state->old_p = false;
arch_spin_unlock(&sb->lock);
} else {
pr_devel(" EOI on source...\n");
/* Perform EOI on the source */
GLUE(X_PFX,source_eoi)(hw_num, xd);
/* If it's an emulated LSI, check level and resend */
if (state->lsi && state->asserted)
__x_writeq(0, __x_trig_page(xd));
}
/*
* This barrier orders the above guest_priority check
* and spin_lock/unlock with clearing in_eoi below.
*
* It also has to be a full mb() as it must ensure
* the MMIOs done in source_eoi() are completed before
* state->in_eoi is visible.
*/
mb();
state->in_eoi = false;
bail:
/* Re-evaluate pending IRQs and update HW */
GLUE(X_PFX,scan_interrupts)(xc, xc->pending, scan_eoi);
GLUE(X_PFX,push_pending_to_hw)(xc);
pr_devel(" after scan pending=%02x\n", xc->pending);
/* Apply new CPPR */
xc->hw_cppr = xc->cppr;
__x_writeb(xc->cppr, __x_tima + TM_QW1_OS + TM_CPPR);
return rc;
}
X_STATIC int GLUE(X_PFX,h_ipi)(struct kvm_vcpu *vcpu, unsigned long server,
unsigned long mfrr)
{
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
pr_devel("H_IPI(server=%08lx,mfrr=%ld)\n", server, mfrr);
xc->GLUE(X_STAT_PFX,h_ipi)++;
/* Find target */
vcpu = kvmppc_xive_find_server(vcpu->kvm, server);
if (!vcpu)
return H_PARAMETER;
xc = vcpu->arch.xive_vcpu;
/* Locklessly write over MFRR */
xc->mfrr = mfrr;
/*
* The load of xc->cppr below and the subsequent MMIO store
* to the IPI must happen after the above mfrr update is
* globally visible so that:
*
* - Synchronize with another CPU doing an H_EOI or a H_CPPR
* updating xc->cppr then reading xc->mfrr.
*
* - The target of the IPI sees the xc->mfrr update
*/
mb();
/* Shoot the IPI if most favored than target cppr */
if (mfrr < xc->cppr)
__x_writeq(0, __x_trig_page(&xc->vp_ipi_data));
return H_SUCCESS;
}