mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-02-05 03:15:18 +07:00
9d71d3cd9e
This is the set of device tree changes, mostly covering new
hardware support, with 577 patches touching a little over 500
files.
There are five new Arm SoCs supported in this release, all of
them for existing SoC families:
- Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in
both NAS devices and Android Set-top-box designs, along
with the "Horseradish", "Lion Skin" and "Mjolnir" reference
platforms; the Mele X1000 and Xnano X5 set-top-boxes and
the Banana Pi BPi-M4 single-board computer.
- Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC
and the iW-RainboW-G21D-Qseven-RZG1H board/SoM
- Rockchips RK3326 -- low-end 64-bit SoC along with the
Odroid-GO Advance game console
Newly added machines on already supported SoCs are:
- AMLogic S905D based Smartlabs SML-5442TW TV box
- AMLogic S905X3 based ODROID-C4 SBC
- AMLogic S922XH based Beelink GT-King Pro TV box
- Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC
- Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2"
and YADRO OpenPower P9 "Nicole"
- Marvell Kirkwood based Check Point L-50 router
- Mediatek MT8173 based Elm/Hana Chromebook laptops
- Microchip SAMA5D2 "Industrial Connectivity Platform"
reference board
- NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit
- Octavo OSDMP15x based Linux Automation MC-1 development board
- Qualcomm SDM630 based Xiaomi Redmi Note 7 phone
- Realtek RTD1295 based Xnano X5 TV Box
- STMicroelectronics STM32MP1 based Stinger96 single-board
computer and IoT Box
- Samsung Exynos4210 based based Samsung Galaxy S2 phone
- Socionext Uniphier based Akebi96 SBC
- TI Keystone based K2G Evaluation board
- TI am5729 based Beaglebone-AI development board
Include device descriptions for additional hardware support in existing
SoCs and machines based on all major SoC platforms:
- AMlogic Meson
- Allwinner sunxi
- Arm Juno/VFP/Vexpress/Integrator
- Broadcom bcm283x/bcm2711
- Hisilicon hi6220
- Marvell EBU
- Mediatek MT27xx, MT76xx, MT81xx and MT67xx
- Microchip SAMA5D2
- NXP i.MX6/i.MX7/i.MX8 and Layerscape
- Nvidia Tegra
- Qualcomm Snapdragon
- Renesas r8a77961, r8a7791
- Rockchips RK32xx/RK33xx
- ST-Ericsson ux500
- STMicroelectronics SMT32
- Samsung Exynos and S5PV210
- Socionext Uniphier
- TI OMAP5/DRA7 and Keystone
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=17kt
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"This is the set of device tree changes, mostly covering new hardware
support, with 577 patches touching a little over 500 files.
There are five new Arm SoCs supported in this release, all of them for
existing SoC families:
- Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
devices and Android Set-top-box designs, along with the
"Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
single-board computer.
- Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
the iW-RainboW-G21D-Qseven-RZG1H board/SoM
- Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
Advance game console
Newly added machines on already supported SoCs are:
- AMLogic S905D based Smartlabs SML-5442TW TV box
- AMLogic S905X3 based ODROID-C4 SBC
- AMLogic S922XH based Beelink GT-King Pro TV box
- Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC
- Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
OpenPower P9 "Nicole"
- Marvell Kirkwood based Check Point L-50 router
- Mediatek MT8173 based Elm/Hana Chromebook laptops
- Microchip SAMA5D2 "Industrial Connectivity Platform" reference
board
- NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit
- Octavo OSDMP15x based Linux Automation MC-1 development board
- Qualcomm SDM630 based Xiaomi Redmi Note 7 phone
- Realtek RTD1295 based Xnano X5 TV Box
- STMicroelectronics STM32MP1 based Stinger96 single-board computer
and IoT Box
- Samsung Exynos4210 based based Samsung Galaxy S2 phone
- Socionext Uniphier based Akebi96 SBC
- TI Keystone based K2G Evaluation board
- TI am5729 based Beaglebone-AI development board
Include device descriptions for additional hardware support in
existing SoCs and machines based on all major SoC platforms:
- AMlogic Meson
- Allwinner sunxi
- Arm Juno/VFP/Vexpress/Integrator
- Broadcom bcm283x/bcm2711
- Hisilicon hi6220
- Marvell EBU
- Mediatek MT27xx, MT76xx, MT81xx and MT67xx
- Microchip SAMA5D2
- NXP i.MX6/i.MX7/i.MX8 and Layerscape
- Nvidia Tegra
- Qualcomm Snapdragon
- Renesas r8a77961, r8a7791
- Rockchips RK32xx/RK33xx
- ST-Ericsson ux500
- STMicroelectronics SMT32
- Samsung Exynos and S5PV210
- Socionext Uniphier
- TI OMAP5/DRA7 and Keystone"
* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
ARM: dts: keystone: Rename "msmram" node to "sram"
arm: dts: mt2712: add uart APDMA to device tree
arm64: dts: mt8183: add mmc node
arm64: dts: mt2712: add ethernet device node
arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
ARM: dts: mmp3: Add the fifth SD HCI
ARM: dts: berlin*: Fix up the SDHCI node names
ARM: dts: mmp3: Fix USB & USB PHY node names
ARM: dts: mmp3: Fix L2 cache controller node name
ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
ARM: dts: pxa910: Fix the gpio interrupt cell number
ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
ARM: dts: pxa168: Fix the gpio interrupt cell number
ARM: dts: pxa168: Add missing address/size cells to i2c nodes
ARM: dts: dove: Fix interrupt controller node name
ARM: dts: kirkwood: Fix interrupt controller node name
arm64: dts: Add SC9863A emmc and sd card nodes
arm64: dts: Add SC9863A clock nodes
arm64: dts: mt6358: add PMIC MT6358 related nodes
...
1235 lines
35 KiB
Plaintext
1235 lines
35 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2017 NXP
|
|
* Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx8mq-clock.h>
|
|
#include <dt-bindings/power/imx8mq-power.h>
|
|
#include <dt-bindings/reset/imx8mq-reset.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "dt-bindings/input/input.h"
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
#include "imx8mq-pinfunc.h"
|
|
|
|
/ {
|
|
interrupt-parent = <&gpc>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
i2c3 = &i2c4;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
spi0 = &ecspi1;
|
|
spi1 = &ecspi2;
|
|
spi2 = &ecspi3;
|
|
};
|
|
|
|
ckil: clock-ckil {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "ckil";
|
|
};
|
|
|
|
osc_25m: clock-osc-25m {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
clock-output-names = "osc_25m";
|
|
};
|
|
|
|
osc_27m: clock-osc-27m {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
clock-output-names = "osc_27m";
|
|
};
|
|
|
|
clk_ext1: clock-ext1 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext1";
|
|
};
|
|
|
|
clk_ext2: clock-ext2 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext2";
|
|
};
|
|
|
|
clk_ext3: clock-ext3 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <133000000>;
|
|
clock-output-names = "clk_ext3";
|
|
};
|
|
|
|
clk_ext4: clock-ext4 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency= <133000000>;
|
|
clock-output-names = "clk_ext4";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
A53_0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x0>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clk IMX8MQ_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
operating-points-v2 = <&a53_opp_table>;
|
|
#cooling-cells = <2>;
|
|
nvmem-cells = <&cpu_speed_grade>;
|
|
nvmem-cell-names = "speed_grade";
|
|
};
|
|
|
|
A53_1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x1>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clk IMX8MQ_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
operating-points-v2 = <&a53_opp_table>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x2>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clk IMX8MQ_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
operating-points-v2 = <&a53_opp_table>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0x3>;
|
|
clock-latency = <61036>; /* two CLK32 periods */
|
|
clocks = <&clk IMX8MQ_CLK_ARM>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A53_L2>;
|
|
operating-points-v2 = <&a53_opp_table>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
A53_L2: l2-cache0 {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
a53_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
|
|
opp-800000000 {
|
|
opp-hz = /bits/ 64 <800000000>;
|
|
opp-microvolt = <900000>;
|
|
/* Industrial only */
|
|
opp-supported-hw = <0xf>, <0x4>;
|
|
clock-latency-ns = <150000>;
|
|
opp-suspend;
|
|
};
|
|
|
|
opp-1000000000 {
|
|
opp-hz = /bits/ 64 <1000000000>;
|
|
opp-microvolt = <900000>;
|
|
/* Consumer only */
|
|
opp-supported-hw = <0xe>, <0x3>;
|
|
clock-latency-ns = <150000>;
|
|
opp-suspend;
|
|
};
|
|
|
|
opp-1300000000 {
|
|
opp-hz = /bits/ 64 <1300000000>;
|
|
opp-microvolt = <1000000>;
|
|
opp-supported-hw = <0xc>, <0x4>;
|
|
clock-latency-ns = <150000>;
|
|
opp-suspend;
|
|
};
|
|
|
|
opp-1500000000 {
|
|
opp-hz = /bits/ 64 <1500000000>;
|
|
opp-microvolt = <1000000>;
|
|
opp-supported-hw = <0x8>, <0x3>;
|
|
clock-latency-ns = <150000>;
|
|
opp-suspend;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a53-pmu";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&gic>;
|
|
interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <2000>;
|
|
thermal-sensors = <&tmu 0>;
|
|
|
|
trips {
|
|
cpu_alert: cpu-alert {
|
|
temperature = <80000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu-crit {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_alert>;
|
|
cooling-device =
|
|
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpu-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <2000>;
|
|
thermal-sensors = <&tmu 1>;
|
|
|
|
trips {
|
|
gpu_alert: gpu-alert {
|
|
temperature = <80000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
gpu-crit {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&gpu_alert>;
|
|
cooling-device =
|
|
<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vpu-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <2000>;
|
|
thermal-sensors = <&tmu 2>;
|
|
|
|
trips {
|
|
vpu-crit {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
|
|
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
|
|
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
|
|
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
|
|
interrupt-parent = <&gic>;
|
|
arm,no-tick-in-suspend;
|
|
};
|
|
|
|
soc@0 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x0 0x3e000000>;
|
|
dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
|
|
|
|
bus@30000000 { /* AIPS1 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30000000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x30000000 0x30000000 0x400000>;
|
|
|
|
sai1: sai@30010000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mq-sai";
|
|
reg = <0x30010000 0x10000>;
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
|
|
<&clk IMX8MQ_CLK_SAI1_ROOT>,
|
|
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai6: sai@30030000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mq-sai";
|
|
reg = <0x30030000 0x10000>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
|
|
<&clk IMX8MQ_CLK_SAI6_ROOT>,
|
|
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai5: sai@30040000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mq-sai";
|
|
reg = <0x30040000 0x10000>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
|
|
<&clk IMX8MQ_CLK_SAI5_ROOT>,
|
|
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai4: sai@30050000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mq-sai";
|
|
reg = <0x30050000 0x10000>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
|
|
<&clk IMX8MQ_CLK_SAI4_ROOT>,
|
|
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio1: gpio@30200000 {
|
|
compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30200000 0x10000>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 10 30>;
|
|
};
|
|
|
|
gpio2: gpio@30210000 {
|
|
compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30210000 0x10000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 40 21>;
|
|
};
|
|
|
|
gpio3: gpio@30220000 {
|
|
compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30220000 0x10000>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 61 26>;
|
|
};
|
|
|
|
gpio4: gpio@30230000 {
|
|
compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30230000 0x10000>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 87 32>;
|
|
};
|
|
|
|
gpio5: gpio@30240000 {
|
|
compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
|
|
reg = <0x30240000 0x10000>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&iomuxc 0 119 30>;
|
|
};
|
|
|
|
tmu: tmu@30260000 {
|
|
compatible = "fsl,imx8mq-tmu";
|
|
reg = <0x30260000 0x10000>;
|
|
interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
|
|
little-endian;
|
|
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
|
|
fsl,tmu-calibration = <0x00000000 0x00000023
|
|
0x00000001 0x00000029
|
|
0x00000002 0x0000002f
|
|
0x00000003 0x00000035
|
|
0x00000004 0x0000003d
|
|
0x00000005 0x00000043
|
|
0x00000006 0x0000004b
|
|
0x00000007 0x00000051
|
|
0x00000008 0x00000057
|
|
0x00000009 0x0000005f
|
|
0x0000000a 0x00000067
|
|
0x0000000b 0x0000006f
|
|
|
|
0x00010000 0x0000001b
|
|
0x00010001 0x00000023
|
|
0x00010002 0x0000002b
|
|
0x00010003 0x00000033
|
|
0x00010004 0x0000003b
|
|
0x00010005 0x00000043
|
|
0x00010006 0x0000004b
|
|
0x00010007 0x00000055
|
|
0x00010008 0x0000005d
|
|
0x00010009 0x00000067
|
|
0x0001000a 0x00000070
|
|
|
|
0x00020000 0x00000017
|
|
0x00020001 0x00000023
|
|
0x00020002 0x0000002d
|
|
0x00020003 0x00000037
|
|
0x00020004 0x00000041
|
|
0x00020005 0x0000004b
|
|
0x00020006 0x00000057
|
|
0x00020007 0x00000063
|
|
0x00020008 0x0000006f
|
|
|
|
0x00030000 0x00000015
|
|
0x00030001 0x00000021
|
|
0x00030002 0x0000002d
|
|
0x00030003 0x00000039
|
|
0x00030004 0x00000045
|
|
0x00030005 0x00000053
|
|
0x00030006 0x0000005f
|
|
0x00030007 0x00000071>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
wdog1: watchdog@30280000 {
|
|
compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
|
|
reg = <0x30280000 0x10000>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog2: watchdog@30290000 {
|
|
compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
|
|
reg = <0x30290000 0x10000>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog3: watchdog@302a0000 {
|
|
compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
|
|
reg = <0x302a0000 0x10000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma2: sdma@302c0000 {
|
|
compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
|
|
reg = <0x302c0000 0x10000>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
|
|
<&clk IMX8MQ_CLK_SDMA2_ROOT>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
|
|
};
|
|
|
|
lcdif: lcd-controller@30320000 {
|
|
compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif";
|
|
reg = <0x30320000 0x10000>;
|
|
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
|
|
clock-names = "pix";
|
|
assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
|
|
<&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
|
|
<&clk IMX8MQ_CLK_LCDIF_PIXEL>,
|
|
<&clk IMX8MQ_VIDEO_PLL1>;
|
|
assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
|
|
<&clk IMX8MQ_VIDEO_PLL1>,
|
|
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
|
|
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iomuxc: pinctrl@30330000 {
|
|
compatible = "fsl,imx8mq-iomuxc";
|
|
reg = <0x30330000 0x10000>;
|
|
};
|
|
|
|
iomuxc_gpr: syscon@30340000 {
|
|
compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr",
|
|
"syscon", "simple-mfd";
|
|
reg = <0x30340000 0x10000>;
|
|
|
|
mux: mux-controller {
|
|
compatible = "mmio-mux";
|
|
#mux-control-cells = <1>;
|
|
mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
|
|
};
|
|
};
|
|
|
|
ocotp: ocotp-ctrl@30350000 {
|
|
compatible = "fsl,imx8mq-ocotp", "syscon";
|
|
reg = <0x30350000 0x10000>;
|
|
clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpu_speed_grade: speed-grade@10 {
|
|
reg = <0x10 4>;
|
|
};
|
|
};
|
|
|
|
anatop: syscon@30360000 {
|
|
compatible = "fsl,imx8mq-anatop", "syscon";
|
|
reg = <0x30360000 0x10000>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
snvs: snvs@30370000 {
|
|
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
|
|
reg = <0x30370000 0x10000>;
|
|
|
|
snvs_rtc: snvs-rtc-lp{
|
|
compatible = "fsl,sec-v4.0-mon-rtc-lp";
|
|
regmap =<&snvs>;
|
|
offset = <0x34>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
|
|
clock-names = "snvs-rtc";
|
|
};
|
|
|
|
snvs_pwrkey: snvs-powerkey {
|
|
compatible = "fsl,sec-v4.0-pwrkey";
|
|
regmap = <&snvs>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
|
|
clock-names = "snvs-pwrkey";
|
|
linux,keycode = <KEY_POWER>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
clk: clock-controller@30380000 {
|
|
compatible = "fsl,imx8mq-ccm";
|
|
reg = <0x30380000 0x10000>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
#clock-cells = <1>;
|
|
clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
|
|
<&clk_ext1>, <&clk_ext2>,
|
|
<&clk_ext3>, <&clk_ext4>;
|
|
clock-names = "ckil", "osc_25m", "osc_27m",
|
|
"clk_ext1", "clk_ext2",
|
|
"clk_ext3", "clk_ext4";
|
|
assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>,
|
|
<&clk IMX8MQ_CLK_A53_CORE>,
|
|
<&clk IMX8MQ_CLK_NOC>;
|
|
assigned-clock-rates = <0>, <0>,
|
|
<800000000>;
|
|
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>,
|
|
<&clk IMX8MQ_ARM_PLL_OUT>;
|
|
};
|
|
|
|
src: reset-controller@30390000 {
|
|
compatible = "fsl,imx8mq-src", "syscon";
|
|
reg = <0x30390000 0x10000>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
gpc: gpc@303a0000 {
|
|
compatible = "fsl,imx8mq-gpc";
|
|
reg = <0x303a0000 0x10000>;
|
|
interrupt-parent = <&gic>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
pgc {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pgc_mipi: power-domain@0 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_MIPI>;
|
|
};
|
|
|
|
/*
|
|
* As per comment in ATF source code:
|
|
*
|
|
* PCIE1 and PCIE2 share the
|
|
* same reset signal, if we
|
|
* power down PCIE2, PCIE1
|
|
* will be held in reset too.
|
|
*
|
|
* So instead of creating two
|
|
* separate power domains for
|
|
* PCIE1 and PCIE2 we create a
|
|
* link between both and use
|
|
* it as a shared PCIE power
|
|
* domain.
|
|
*/
|
|
pgc_pcie: power-domain@1 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_PCIE1>;
|
|
power-domains = <&pgc_pcie2>;
|
|
};
|
|
|
|
pgc_otg1: power-domain@2 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
|
|
};
|
|
|
|
pgc_otg2: power-domain@3 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
|
|
};
|
|
|
|
pgc_ddr1: power-domain@4 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_DDR1>;
|
|
};
|
|
|
|
pgc_gpu: power-domain@5 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_GPU>;
|
|
clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
|
|
<&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
|
|
<&clk IMX8MQ_CLK_GPU_AXI>,
|
|
<&clk IMX8MQ_CLK_GPU_AHB>;
|
|
};
|
|
|
|
pgc_vpu: power-domain@6 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_VPU>;
|
|
};
|
|
|
|
pgc_disp: power-domain@7 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_DISP>;
|
|
};
|
|
|
|
pgc_mipi_csi1: power-domain@8 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
|
|
};
|
|
|
|
pgc_mipi_csi2: power-domain@9 {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
|
|
};
|
|
|
|
pgc_pcie2: power-domain@a {
|
|
#power-domain-cells = <0>;
|
|
reg = <IMX8M_POWER_DOMAIN_PCIE2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
bus@30400000 { /* AIPS2 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30400000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x30400000 0x30400000 0x400000>;
|
|
|
|
pwm1: pwm@30660000 {
|
|
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30660000 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
|
|
<&clk IMX8MQ_CLK_PWM1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@30670000 {
|
|
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30670000 0x10000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
|
|
<&clk IMX8MQ_CLK_PWM2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@30680000 {
|
|
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30680000 0x10000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
|
|
<&clk IMX8MQ_CLK_PWM3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm4: pwm@30690000 {
|
|
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
|
|
reg = <0x30690000 0x10000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
|
|
<&clk IMX8MQ_CLK_PWM4_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
#pwm-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
system_counter: timer@306a0000 {
|
|
compatible = "nxp,sysctr-timer";
|
|
reg = <0x306a0000 0x20000>;
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&osc_25m>;
|
|
clock-names = "per";
|
|
};
|
|
};
|
|
|
|
bus@30800000 { /* AIPS3 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x30800000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x30800000 0x30800000 0x400000>,
|
|
<0x08000000 0x08000000 0x10000000>;
|
|
|
|
ecspi1: spi@30820000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30820000 0x10000>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
|
|
<&clk IMX8MQ_CLK_ECSPI1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi2: spi@30830000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30830000 0x10000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
|
|
<&clk IMX8MQ_CLK_ECSPI2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi3: spi@30840000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x30840000 0x10000>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
|
|
<&clk IMX8MQ_CLK_ECSPI3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@30860000 {
|
|
compatible = "fsl,imx8mq-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30860000 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
|
|
<&clk IMX8MQ_CLK_UART1_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@30880000 {
|
|
compatible = "fsl,imx8mq-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30880000 0x10000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
|
|
<&clk IMX8MQ_CLK_UART3_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@30890000 {
|
|
compatible = "fsl,imx8mq-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30890000 0x10000>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
|
|
<&clk IMX8MQ_CLK_UART2_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai2: sai@308b0000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mq-sai";
|
|
reg = <0x308b0000 0x10000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
|
|
<&clk IMX8MQ_CLK_SAI2_ROOT>,
|
|
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai3: sai@308c0000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx8mq-sai";
|
|
reg = <0x308c0000 0x10000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
|
|
<&clk IMX8MQ_CLK_SAI3_ROOT>,
|
|
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto: crypto@30900000 {
|
|
compatible = "fsl,sec-v4.0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x30900000 0x40000>;
|
|
ranges = <0 0x30900000 0x40000>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_AHB>,
|
|
<&clk IMX8MQ_CLK_IPG_ROOT>;
|
|
clock-names = "aclk", "ipg";
|
|
|
|
sec_jr0: jr@1000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr1: jr@2000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x2000 0x1000>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr2: jr@3000 {
|
|
compatible = "fsl,sec-v4.0-job-ring";
|
|
reg = <0x3000 0x1000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
dphy: dphy@30a00300 {
|
|
compatible = "fsl,imx8mq-mipi-dphy";
|
|
reg = <0x30a00300 0x100>;
|
|
clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
|
|
clock-names = "phy_ref";
|
|
assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
|
|
assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
|
|
assigned-clock-rates = <24000000>;
|
|
#phy-cells = <0>;
|
|
power-domains = <&pgc_mipi>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@30a20000 {
|
|
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a20000 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@30a30000 {
|
|
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a30000 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@30a40000 {
|
|
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a40000 0x10000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@30a50000 {
|
|
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
|
|
reg = <0x30a50000 0x10000>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@30a60000 {
|
|
compatible = "fsl,imx8mq-uart",
|
|
"fsl,imx6q-uart";
|
|
reg = <0x30a60000 0x10000>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
|
|
<&clk IMX8MQ_CLK_UART4_ROOT>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc1: mmc@30b40000 {
|
|
compatible = "fsl,imx8mq-usdhc",
|
|
"fsl,imx7d-usdhc";
|
|
reg = <0x30b40000 0x10000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
|
|
<&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
|
|
<&clk IMX8MQ_CLK_USDHC1_ROOT>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step = <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc2: mmc@30b50000 {
|
|
compatible = "fsl,imx8mq-usdhc",
|
|
"fsl,imx7d-usdhc";
|
|
reg = <0x30b50000 0x10000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
|
|
<&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
|
|
<&clk IMX8MQ_CLK_USDHC2_ROOT>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step = <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qspi0: spi@30bb0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
|
|
reg = <0x30bb0000 0x10000>,
|
|
<0x08000000 0x10000000>;
|
|
reg-names = "QuadSPI", "QuadSPI-memory";
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
|
|
<&clk IMX8MQ_CLK_QSPI_ROOT>;
|
|
clock-names = "qspi_en", "qspi";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma1: sdma@30bd0000 {
|
|
compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
|
|
reg = <0x30bd0000 0x10000>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
|
|
<&clk IMX8MQ_CLK_AHB>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
|
|
};
|
|
|
|
fec1: ethernet@30be0000 {
|
|
compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
|
|
reg = <0x30be0000 0x10000>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
|
|
<&clk IMX8MQ_CLK_ENET1_ROOT>,
|
|
<&clk IMX8MQ_CLK_ENET_TIMER>,
|
|
<&clk IMX8MQ_CLK_ENET_REF>,
|
|
<&clk IMX8MQ_CLK_ENET_PHY_REF>;
|
|
clock-names = "ipg", "ahb", "ptp",
|
|
"enet_clk_ref", "enet_out";
|
|
fsl,num-tx-queues = <3>;
|
|
fsl,num-rx-queues = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
bus@32c00000 { /* AIPS4 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
reg = <0x32c00000 0x400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x32c00000 0x32c00000 0x400000>;
|
|
|
|
irqsteer: interrupt-controller@32e2d000 {
|
|
compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
|
|
reg = <0x32e2d000 0x1000>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
|
|
clock-names = "ipg";
|
|
fsl,channel = <0>;
|
|
fsl,num-irqs = <64>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
|
|
gpu: gpu@38000000 {
|
|
compatible = "vivante,gc";
|
|
reg = <0x38000000 0x40000>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
|
|
<&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
|
|
<&clk IMX8MQ_CLK_GPU_AXI>,
|
|
<&clk IMX8MQ_CLK_GPU_AHB>;
|
|
clock-names = "core", "shader", "bus", "reg";
|
|
#cooling-cells = <2>;
|
|
assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
|
|
<&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
|
|
<&clk IMX8MQ_CLK_GPU_AXI>,
|
|
<&clk IMX8MQ_CLK_GPU_AHB>,
|
|
<&clk IMX8MQ_GPU_PLL_BYPASS>;
|
|
assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
|
|
<&clk IMX8MQ_GPU_PLL_OUT>,
|
|
<&clk IMX8MQ_GPU_PLL_OUT>,
|
|
<&clk IMX8MQ_GPU_PLL_OUT>,
|
|
<&clk IMX8MQ_GPU_PLL>;
|
|
assigned-clock-rates = <800000000>, <800000000>,
|
|
<800000000>, <800000000>, <0>;
|
|
power-domains = <&pgc_gpu>;
|
|
};
|
|
|
|
usb_dwc3_0: usb@38100000 {
|
|
compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
|
|
reg = <0x38100000 0x10000>;
|
|
clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
|
|
<&clk IMX8MQ_CLK_USB_CORE_REF>,
|
|
<&clk IMX8MQ_CLK_32K>;
|
|
clock-names = "bus_early", "ref", "suspend";
|
|
assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
|
|
<&clk IMX8MQ_CLK_USB_CORE_REF>;
|
|
assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
|
|
<&clk IMX8MQ_SYS1_PLL_100M>;
|
|
assigned-clock-rates = <500000000>, <100000000>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usb3_phy0>, <&usb3_phy0>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
power-domains = <&pgc_otg1>;
|
|
usb3-resume-missing-cas;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3_phy0: usb-phy@381f0040 {
|
|
compatible = "fsl,imx8mq-usb-phy";
|
|
reg = <0x381f0040 0x40>;
|
|
clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
|
|
clock-names = "phy";
|
|
assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
|
|
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
|
|
assigned-clock-rates = <100000000>;
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_dwc3_1: usb@38200000 {
|
|
compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
|
|
reg = <0x38200000 0x10000>;
|
|
clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
|
|
<&clk IMX8MQ_CLK_USB_CORE_REF>,
|
|
<&clk IMX8MQ_CLK_32K>;
|
|
clock-names = "bus_early", "ref", "suspend";
|
|
assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
|
|
<&clk IMX8MQ_CLK_USB_CORE_REF>;
|
|
assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
|
|
<&clk IMX8MQ_SYS1_PLL_100M>;
|
|
assigned-clock-rates = <500000000>, <100000000>;
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usb3_phy1>, <&usb3_phy1>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
power-domains = <&pgc_otg2>;
|
|
usb3-resume-missing-cas;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3_phy1: usb-phy@382f0040 {
|
|
compatible = "fsl,imx8mq-usb-phy";
|
|
reg = <0x382f0040 0x40>;
|
|
clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
|
|
clock-names = "phy";
|
|
assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
|
|
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
|
|
assigned-clock-rates = <100000000>;
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie0: pcie@33800000 {
|
|
compatible = "fsl,imx8mq-pcie";
|
|
reg = <0x33800000 0x400000>,
|
|
<0x1ff00000 0x80000>;
|
|
reg-names = "dbi", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
bus-range = <0x00 0xff>;
|
|
ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
|
|
0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
|
|
num-lanes = <1>;
|
|
num-viewport = <4>;
|
|
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,max-link-speed = <2>;
|
|
power-domains = <&pgc_pcie>;
|
|
resets = <&src IMX8MQ_RESET_PCIEPHY>,
|
|
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
|
|
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
|
|
reset-names = "pciephy", "apps", "turnoff";
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie1: pcie@33c00000 {
|
|
compatible = "fsl,imx8mq-pcie";
|
|
reg = <0x33c00000 0x400000>,
|
|
<0x27f00000 0x80000>;
|
|
reg-names = "dbi", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */
|
|
0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
|
|
num-lanes = <1>;
|
|
num-viewport = <4>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,max-link-speed = <2>;
|
|
power-domains = <&pgc_pcie>;
|
|
resets = <&src IMX8MQ_RESET_PCIEPHY2>,
|
|
<&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
|
|
<&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
|
|
reset-names = "pciephy", "apps", "turnoff";
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@38800000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x38800000 0x10000>, /* GIC Dist */
|
|
<0x38880000 0xc0000>, /* GICR */
|
|
<0x31000000 0x2000>, /* GICC */
|
|
<0x31010000 0x2000>, /* GICV */
|
|
<0x31020000 0x2000>; /* GICH */
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
ddrc: memory-controller@3d400000 {
|
|
compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
|
|
reg = <0x3d400000 0x400000>;
|
|
clock-names = "core", "pll", "alt", "apb";
|
|
clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
|
|
<&clk IMX8MQ_DRAM_PLL_OUT>,
|
|
<&clk IMX8MQ_CLK_DRAM_ALT>,
|
|
<&clk IMX8MQ_CLK_DRAM_APB>;
|
|
};
|
|
|
|
ddr-pmu@3d800000 {
|
|
compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
|
|
reg = <0x3d800000 0x400000>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|