linux_dsm_epyc7002/drivers/media/pci/mantis/mantis_ioc.c
Mauro Carvalho Chehab 25aee3debe [media] Rename media/dvb as media/pci
The remaining dvb drivers are pci, so rename them to match the
bus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13 23:30:06 -03:00

125 lines
3.1 KiB
C

/*
Mantis PCI bridge driver
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_ioc.h"
static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length)
{
struct i2c_adapter *adapter = &mantis->adapter;
int err;
u8 buf = reg;
struct i2c_msg msg[] = {
{ .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 },
{ .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
};
err = i2c_transfer(adapter, msg, 2);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
err, data[0], data[1]);
return err;
}
return 0;
}
int mantis_get_mac(struct mantis_pci *mantis)
{
int err;
u8 mac_addr[6] = {0};
err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
return err;
}
dprintk(MANTIS_ERROR, 0, " MAC Address=[%pM]\n", mac_addr);
return 0;
}
EXPORT_SYMBOL_GPL(mantis_get_mac);
/* Turn the given bit on or off. */
void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
{
u32 cur;
dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value);
cur = mmread(MANTIS_GPIF_ADDR);
if (value)
mantis->gpio_status = cur | (1 << bitpos);
else
mantis->gpio_status = cur & (~(1 << bitpos));
dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status);
mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
mmwrite(0x00, MANTIS_GPIF_DOUT);
}
EXPORT_SYMBOL_GPL(mantis_gpio_set_bits);
int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
{
u32 reg;
reg = mmread(MANTIS_CONTROL);
switch (stream_ctl) {
case STREAM_TO_HIF:
dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
reg &= 0xff - MANTIS_BYPASS;
mmwrite(reg, MANTIS_CONTROL);
reg |= MANTIS_BYPASS;
mmwrite(reg, MANTIS_CONTROL);
break;
case STREAM_TO_CAM:
dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
reg |= MANTIS_BYPASS;
mmwrite(reg, MANTIS_CONTROL);
reg &= 0xff - MANTIS_BYPASS;
mmwrite(reg, MANTIS_CONTROL);
break;
default:
dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
return -1;
}
return 0;
}
EXPORT_SYMBOL_GPL(mantis_stream_control);