AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-04 08:26:55 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
bf36076a67
linux_dsm_epyc7002/arch/mips/alchemy/common/irq.c
Manuel Lauss 0f0d85bcc3 MIPS: Alchemy: add sysdev for IRQ PM. 
Use a sysdev to implement PM methods for the Au1000 interrupt controllers.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1114/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21 21:31:15 +01:00

644 lines
20 KiB
C
Raw Blame History

/*
* Copyright 2001, 2007-2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/sysdev.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_PB1000
#include <asm/mach-pb1x00/pb1000.h>
#endif
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
/* NOTE on interrupt priorities: The original writers of this code said:
*
* Because of the tight timing of SETUP token to reply transactions,
* the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
* needs the highest priority.
*/
/* per-processor fixed function irqs */
struct au1xxx_irqmap {
int im_irq;
int im_type;
int im_request; /* set 1 to get higher priority */
};
struct au1xxx_irqmap au1000_irqmap[] __initdata = {
{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ -1, },
};
struct au1xxx_irqmap au1500_irqmap[] __initdata = {
{ AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ -1, },
};
struct au1xxx_irqmap au1100_irqmap[] __initdata = {
{ AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ -1, },
};
struct au1xxx_irqmap au1550_irqmap[] __initdata = {
{ AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ -1, },
};
struct au1xxx_irqmap au1200_irqmap[] __initdata = {
{ AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ -1, },
};
static void au1x_ic0_unmask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
au_writel(1 << bit, IC0_MASKSET);
au_writel(1 << bit, IC0_WAKESET);
au_sync();
}
static void au1x_ic1_unmask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
au_writel(1 << bit, IC1_MASKSET);
au_writel(1 << bit, IC1_WAKESET);
/* very hacky. does the pb1000 cpld auto-disable this int?
* nowhere in the current kernel sources is it disabled. --mlau
*/
#if defined(CONFIG_MIPS_PB1000)
if (irq_nr == AU1000_GPIO15_INT)
au_writel(0x4000, PB1000_MDR); /* enable int */
#endif
au_sync();
}
static void au1x_ic0_mask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
au_writel(1 << bit, IC0_MASKCLR);
au_writel(1 << bit, IC0_WAKECLR);
au_sync();
}
static void au1x_ic1_mask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
au_writel(1 << bit, IC1_MASKCLR);
au_writel(1 << bit, IC1_WAKECLR);
au_sync();
}
static void au1x_ic0_ack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
au_writel(1 << bit, IC0_FALLINGCLR);
au_writel(1 << bit, IC0_RISINGCLR);
au_sync();
}
static void au1x_ic1_ack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
au_writel(1 << bit, IC1_FALLINGCLR);
au_writel(1 << bit, IC1_RISINGCLR);
au_sync();
}
static void au1x_ic0_maskack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
au_writel(1 << bit, IC0_WAKECLR);
au_writel(1 << bit, IC0_MASKCLR);
au_writel(1 << bit, IC0_RISINGCLR);
au_writel(1 << bit, IC0_FALLINGCLR);
au_sync();
}
static void au1x_ic1_maskack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
au_writel(1 << bit, IC1_WAKECLR);
au_writel(1 << bit, IC1_MASKCLR);
au_writel(1 << bit, IC1_RISINGCLR);
au_writel(1 << bit, IC1_FALLINGCLR);
au_sync();
}
static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
{
int bit = irq - AU1000_INTC1_INT_BASE;
unsigned long wakemsk, flags;
/* only GPIO 0-7 can act as wakeup source. Fortunately these
* are wired up identically on all supported variants.
*/
if ((bit < 0) || (bit > 7))
return -EINVAL;
local_irq_save(flags);
wakemsk = au_readl(SYS_WAKEMSK);
if (on)
wakemsk |= 1 << bit;
else
wakemsk &= ~(1 << bit);
au_writel(wakemsk, SYS_WAKEMSK);
au_sync();
local_irq_restore(flags);
return 0;
}
/*
* irq_chips for both ICs; this way the mask handlers can be
* as short as possible.
*/
static struct irq_chip au1x_ic0_chip = {
.name = "Alchemy-IC0",
.ack = au1x_ic0_ack,
.mask = au1x_ic0_mask,
.mask_ack = au1x_ic0_maskack,
.unmask = au1x_ic0_unmask,
.set_type = au1x_ic_settype,
};
static struct irq_chip au1x_ic1_chip = {
.name = "Alchemy-IC1",
.ack = au1x_ic1_ack,
.mask = au1x_ic1_mask,
.mask_ack = au1x_ic1_maskack,
.unmask = au1x_ic1_unmask,
.set_type = au1x_ic_settype,
.set_wake = au1x_ic1_setwake,
};
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
{
struct irq_chip *chip;
unsigned long icr[6];
unsigned int bit, ic;
int ret;
if (irq >= AU1000_INTC1_INT_BASE) {
bit = irq - AU1000_INTC1_INT_BASE;
chip = &au1x_ic1_chip;
ic = 1;
} else {
bit = irq - AU1000_INTC0_INT_BASE;
chip = &au1x_ic0_chip;
ic = 0;
}
if (bit > 31)
return -EINVAL;
icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
ret = 0;
switch (flow_type) { /* cfgregs 2:1:0 */
case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */
au_writel(1 << bit, icr[5]);
au_writel(1 << bit, icr[4]);
au_writel(1 << bit, icr[0]);
set_irq_chip_and_handler_name(irq, chip,
handle_edge_irq, "riseedge");
break;
case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */
au_writel(1 << bit, icr[5]);
au_writel(1 << bit, icr[1]);
au_writel(1 << bit, icr[3]);
set_irq_chip_and_handler_name(irq, chip,
handle_edge_irq, "falledge");
break;
case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */
au_writel(1 << bit, icr[5]);
au_writel(1 << bit, icr[1]);
au_writel(1 << bit, icr[0]);
set_irq_chip_and_handler_name(irq, chip,
handle_edge_irq, "bothedge");
break;
case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */
au_writel(1 << bit, icr[2]);
au_writel(1 << bit, icr[4]);
au_writel(1 << bit, icr[0]);
set_irq_chip_and_handler_name(irq, chip,
handle_level_irq, "hilevel");
break;
case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */
au_writel(1 << bit, icr[2]);
au_writel(1 << bit, icr[1]);
au_writel(1 << bit, icr[3]);
set_irq_chip_and_handler_name(irq, chip,
handle_level_irq, "lowlevel");
break;
case IRQ_TYPE_NONE: /* 0:0:0 */
au_writel(1 << bit, icr[5]);
au_writel(1 << bit, icr[4]);
au_writel(1 << bit, icr[3]);
/* set at least chip so we can call set_irq_type() on it */
set_irq_chip(irq, chip);
break;
default:
ret = -EINVAL;
}
au_sync();
return ret;
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause();
unsigned long s, off;
if (pending & CAUSEF_IP7) {
off = MIPS_CPU_IRQ_BASE + 7;
goto handle;
} else if (pending & CAUSEF_IP2) {
s = IC0_REQ0INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP3) {
s = IC0_REQ1INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP4) {
s = IC1_REQ0INT;
off = AU1000_INTC1_INT_BASE;
} else if (pending & CAUSEF_IP5) {
s = IC1_REQ1INT;
off = AU1000_INTC1_INT_BASE;
} else
goto spurious;
s = au_readl(s);
if (unlikely(!s)) {
spurious:
spurious_interrupt();
return;
}
off += __ffs(s);
handle:
do_IRQ(off);
}
static void __init au1000_init_irq(struct au1xxx_irqmap *map)
{
unsigned int bit, irq_nr;
int i;
/*
* Initialize interrupt controllers to a safe state.
*/
au_writel(0xffffffff, IC0_CFG0CLR);
au_writel(0xffffffff, IC0_CFG1CLR);
au_writel(0xffffffff, IC0_CFG2CLR);
au_writel(0xffffffff, IC0_MASKCLR);
au_writel(0xffffffff, IC0_ASSIGNCLR);
au_writel(0xffffffff, IC0_WAKECLR);
au_writel(0xffffffff, IC0_SRCSET);
au_writel(0xffffffff, IC0_FALLINGCLR);
au_writel(0xffffffff, IC0_RISINGCLR);
au_writel(0x00000000, IC0_TESTBIT);
au_writel(0xffffffff, IC1_CFG0CLR);
au_writel(0xffffffff, IC1_CFG1CLR);
au_writel(0xffffffff, IC1_CFG2CLR);
au_writel(0xffffffff, IC1_MASKCLR);
au_writel(0xffffffff, IC1_ASSIGNCLR);
au_writel(0xffffffff, IC1_WAKECLR);
au_writel(0xffffffff, IC1_SRCSET);
au_writel(0xffffffff, IC1_FALLINGCLR);
au_writel(0xffffffff, IC1_RISINGCLR);
au_writel(0x00000000, IC1_TESTBIT);
mips_cpu_irq_init();
/* register all 64 possible IC0+IC1 irq sources as type "none".
* Use set_irq_type() to set edge/level behaviour at runtime.
*/
for (i = AU1000_INTC0_INT_BASE;
(i < AU1000_INTC0_INT_BASE + 32); i++)
au1x_ic_settype(i, IRQ_TYPE_NONE);
for (i = AU1000_INTC1_INT_BASE;
(i < AU1000_INTC1_INT_BASE + 32); i++)
au1x_ic_settype(i, IRQ_TYPE_NONE);
/*
* Initialize IC0, which is fixed per processor.
*/
while (map->im_irq != -1) {
irq_nr = map->im_irq;
if (irq_nr >= AU1000_INTC1_INT_BASE) {
bit = irq_nr - AU1000_INTC1_INT_BASE;
if (map->im_request)
au_writel(1 << bit, IC1_ASSIGNSET);
} else {
bit = irq_nr - AU1000_INTC0_INT_BASE;
if (map->im_request)
au_writel(1 << bit, IC0_ASSIGNSET);
}
au1x_ic_settype(irq_nr, map->im_type);
++map;
}
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
}
void __init arch_init_irq(void)
{
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
au1000_init_irq(au1000_irqmap);
break;
case ALCHEMY_CPU_AU1500:
au1000_init_irq(au1500_irqmap);
break;
case ALCHEMY_CPU_AU1100:
au1000_init_irq(au1100_irqmap);
break;
case ALCHEMY_CPU_AU1550:
au1000_init_irq(au1550_irqmap);
break;
case ALCHEMY_CPU_AU1200:
au1000_init_irq(au1200_irqmap);
break;
}
}
struct alchemy_ic_sysdev {
struct sys_device sysdev;
void __iomem *base;
unsigned long pmdata[7];
};
static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
{
struct alchemy_ic_sysdev *icdev =
container_of(dev, struct alchemy_ic_sysdev, sysdev);
icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
return 0;
}
static int alchemy_ic_resume(struct sys_device *dev)
{
struct alchemy_ic_sysdev *icdev =
container_of(dev, struct alchemy_ic_sysdev, sysdev);
__raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
__raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
__raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
__raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
__raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
__raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
__raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
__raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
__raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
__raw_writel(0x00000000, icdev->base + IC_TESTBIT);
wmb();
__raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
__raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
__raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
__raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
__raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
__raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
wmb();
__raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
wmb();
return 0;
}
static struct sysdev_class alchemy_ic_sysdev_class = {
.name = "ic",
.suspend = alchemy_ic_suspend,
.resume = alchemy_ic_resume,
};
static int __init alchemy_ic_sysdev_init(void)
{
struct alchemy_ic_sysdev *icdev;
unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
int err, i;
err = sysdev_class_register(&alchemy_ic_sysdev_class);
if (err)
return err;
for (i = 0; i < 2; i++) {
icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
if (!icdev)
return -ENOMEM;
icdev->base = ioremap(icbase[i], 0x1000);
icdev->sysdev.id = i;
icdev->sysdev.cls = &alchemy_ic_sysdev_class;
err = sysdev_register(&icdev->sysdev);
if (err) {
kfree(icdev);
return err;
}
}
return 0;
}
device_initcall(alchemy_ic_sysdev_init);
Reference in New Issue View Git Blame Copy Permalink