AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-20 14:09:28 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
bf03d4f933
linux_dsm_epyc7002/arch/arm/mach-omap2/sleep43xx.S
Dave Gerlach 11140cc40d ARM: OMAP2+: sleep43xx: Run EMIF HW leveling on resume path 
When returning from DeepSleep mode on AM437x platforms the EMIF must run
DDR hardware leveling, same as done during u-boot, to properly restore the
EMIF PHY to it's operational state on platforms using DDR3.

Call the ti-emif-sram-pm run_hw_leveling routine to perform this. This
happens after all other EMIF values are restored so the exact same
configuration used at boot is used at the end of EMIF resume as well.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-09 08:32:12 -07:00

492 lines
11 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Low level suspend code for AM43XX SoCs
*
* Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
* Dave Gerlach, Vaibhav Bedia
*/
#include <generated/ti-pm-asm-offsets.h>
#include <linux/linkage.h>
#include <linux/ti-emif-sram.h>
#include <linux/platform_data/pm33xx.h>
#include <asm/assembler.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/memory.h>
#include "cm33xx.h"
#include "common.h"
#include "iomap.h"
#include "omap-secure.h"
#include "omap44xx.h"
#include "prm33xx.h"
#include "prcm43xx.h"
/* replicated define because linux/bitops.h cannot be included in assembly */
#define BIT(nr) (1 << (nr))
#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000
#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003
#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002
#define AM43XX_EMIF_POWEROFF_ENABLE 0x1
#define AM43XX_EMIF_POWEROFF_DISABLE 0x0
#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP 0x1
#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO 0x3
#define AM43XX_CM_BASE 0x44DF0000
#define AM43XX_CM_REGADDR(inst, reg) \
AM33XX_L4_WK_IO_ADDRESS(AM43XX_CM_BASE + (inst) + (reg))
#define AM43XX_CM_MPU_CLKSTCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
AM43XX_CM_MPU_MPU_CDOFFS)
#define AM43XX_CM_MPU_MPU_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET)
#define AM43XX_CM_PER_EMIF_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_PER_INST, \
AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
#define AM43XX_PRM_EMIF_CTRL_OFFSET 0x0030
#define RTC_SECONDS_REG 0x0
#define RTC_PMIC_REG 0x98
#define RTC_PMIC_POWER_EN BIT(16)
#define RTC_PMIC_EXT_WAKEUP_STS BIT(12)
#define RTC_PMIC_EXT_WAKEUP_POL BIT(4)
#define RTC_PMIC_EXT_WAKEUP_EN BIT(0)
.arm
.align 3
ENTRY(am43xx_do_wfi)
stmfd sp!, {r4 - r11, lr} @ save registers on stack
/* Save wfi_flags arg to data space */
mov r4, r0
adr r3, am43xx_pm_ro_sram_data
ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
str r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]
#ifdef CONFIG_CACHE_L2X0
/* Retrieve l2 cache virt address BEFORE we shut off EMIF */
ldr r1, get_l2cache_base
blx r1
mov r8, r0
#endif
/* Only flush cache is we know we are losing MPU context */
tst r4, #WFI_FLAG_FLUSH_CACHE
beq cache_skip_flush
/*
* Flush all data from the L1 and L2 data cache before disabling
* SCTLR.C bit.
*/
ldr r1, kernel_flush
blx r1
/*
* Clear the SCTLR.C bit to prevent further data cache
* allocation. Clearing SCTLR.C would make all the data accesses
* strongly ordered and would not hit the cache.
*/
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #(1 << 2) @ Disable the C bit
mcr p15, 0, r0, c1, c0, 0
isb
dsb
/*
* Invalidate L1 and L2 data cache.
*/
ldr r1, kernel_flush
blx r1
#ifdef CONFIG_CACHE_L2X0
/*
* Clean and invalidate the L2 cache.
*/
#ifdef CONFIG_PL310_ERRATA_727915
mov r0, #0x03
mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
dsb
smc #0
dsb
#endif
mov r0, r8
adr r4, am43xx_pm_ro_sram_data
ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
mov r2, r0
ldr r0, [r2, #L2X0_AUX_CTRL]
str r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
ldr r0, [r2, #L310_PREFETCH_CTRL]
str r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
ldr r0, l2_val
str r0, [r2, #L2X0_CLEAN_INV_WAY]
wait:
ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
ldr r1, l2_val
ands r0, r0, r1
bne wait
#ifdef CONFIG_PL310_ERRATA_727915
mov r0, #0x00
mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
dsb
smc #0
dsb
#endif
l2x_sync:
mov r0, r8
mov r2, r0
mov r0, #0x0
str r0, [r2, #L2X0_CACHE_SYNC]
sync:
ldr r0, [r2, #L2X0_CACHE_SYNC]
ands r0, r0, #0x1
bne sync
#endif
/* Restore wfi_flags */
adr r3, am43xx_pm_ro_sram_data
ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
ldr r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]
cache_skip_flush:
/*
* If we are trying to enter RTC+DDR mode we must perform
* a read from the rtc address space to ensure translation
* presence in the TLB to avoid page table walk after DDR
* is unavailable.
*/
tst r4, #WFI_FLAG_RTC_ONLY
beq skip_rtc_va_refresh
adr r3, am43xx_pm_ro_sram_data
ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]
ldr r0, [r1]
skip_rtc_va_refresh:
/* Check if we want self refresh */
tst r4, #WFI_FLAG_SELF_REFRESH
beq emif_skip_enter_sr
adr r9, am43xx_emif_sram_table
ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
blx r3
emif_skip_enter_sr:
/* Only necessary if PER is losing context */
tst r4, #WFI_FLAG_SAVE_EMIF
beq emif_skip_save
ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
blx r3
emif_skip_save:
/* Only can disable EMIF if we have entered self refresh */
tst r4, #WFI_FLAG_SELF_REFRESH
beq emif_skip_disable
/* Disable EMIF */
ldr r1, am43xx_virt_emif_clkctrl
ldr r2, [r1]
bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
str r2, [r1]
wait_emif_disable:
ldr r2, [r1]
mov r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
cmp r2, r3
bne wait_emif_disable
emif_skip_disable:
tst r4, #WFI_FLAG_RTC_ONLY
beq skip_rtc_only
adr r3, am43xx_pm_ro_sram_data
ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]
ldr r0, [r1, #RTC_PMIC_REG]
orr r0, r0, #RTC_PMIC_POWER_EN
orr r0, r0, #RTC_PMIC_EXT_WAKEUP_STS
orr r0, r0, #RTC_PMIC_EXT_WAKEUP_EN
orr r0, r0, #RTC_PMIC_EXT_WAKEUP_POL
str r0, [r1, #RTC_PMIC_REG]
ldr r0, [r1, #RTC_PMIC_REG]
/* Wait for 2 seconds to lose power */
mov r3, #2
ldr r2, [r1, #RTC_SECONDS_REG]
rtc_loop:
ldr r0, [r1, #RTC_SECONDS_REG]
cmp r0, r2
beq rtc_loop
mov r2, r0
subs r3, r3, #1
bne rtc_loop
b re_enable_emif
skip_rtc_only:
tst r4, #WFI_FLAG_WAKE_M3
beq wkup_m3_skip
/*
* For the MPU WFI to be registered as an interrupt
* to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
* to DISABLED
*/
ldr r1, am43xx_virt_mpu_clkctrl
ldr r2, [r1]
bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
str r2, [r1]
/*
* Put MPU CLKDM to SW_SLEEP
*/
ldr r1, am43xx_virt_mpu_clkstctrl
mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP
str r2, [r1]
wkup_m3_skip:
/*
* Execute a barrier instruction to ensure that all cache,
* TLB and branch predictor maintenance operations issued
* have completed.
*/
dsb
dmb
/*
* Execute a WFI instruction and wait until the
* STANDBYWFI output is asserted to indicate that the
* CPU is in idle and low power state. CPU can specualatively
* prefetch the instructions so add NOPs after WFI. Sixteen
* NOPs as per Cortex-A9 pipeline.
*/
wfi
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
/* We come here in case of an abort due to a late interrupt */
ldr r1, am43xx_virt_mpu_clkstctrl
mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
str r2, [r1]
/* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
ldr r1, am43xx_virt_mpu_clkctrl
mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
str r2, [r1]
re_enable_emif:
/* Re-enable EMIF */
ldr r1, am43xx_virt_emif_clkctrl
mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
str r2, [r1]
wait_emif_enable:
ldr r3, [r1]
cmp r2, r3
bne wait_emif_enable
tst r4, #WFI_FLAG_FLUSH_CACHE
beq cache_skip_restore
/*
* Set SCTLR.C bit to allow data cache allocation
*/
mrc p15, 0, r0, c1, c0, 0
orr r0, r0, #(1 << 2) @ Enable the C bit
mcr p15, 0, r0, c1, c0, 0
isb
cache_skip_restore:
/* Only necessary if PER is losing context */
tst r4, #WFI_FLAG_SELF_REFRESH
beq emif_skip_exit_sr_abt
adr r9, am43xx_emif_sram_table
ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
blx r1
emif_skip_exit_sr_abt:
/* Let the suspend code know about the abort */
mov r0, #1
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
ENDPROC(am43xx_do_wfi)
.align
ENTRY(am43xx_resume_offset)
.word . - am43xx_do_wfi
ENTRY(am43xx_resume_from_deep_sleep)
/* Set MPU CLKSTCTRL to HW AUTO so that CPUidle works properly */
ldr r1, am43xx_virt_mpu_clkstctrl
mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
str r2, [r1]
/* For AM43xx, use EMIF power down until context is restored */
ldr r2, am43xx_phys_emif_poweroff
mov r1, #AM43XX_EMIF_POWEROFF_ENABLE
str r1, [r2, #0x0]
/* Re-enable EMIF */
ldr r1, am43xx_phys_emif_clkctrl
mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
str r2, [r1]
wait_emif_enable1:
ldr r3, [r1]
cmp r2, r3
bne wait_emif_enable1
adr r9, am43xx_emif_sram_table
ldr r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
blx r1
ldr r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
blx r1
ldr r2, am43xx_phys_emif_poweroff
mov r1, #AM43XX_EMIF_POWEROFF_DISABLE
str r1, [r2, #0x0]
ldr r1, [r9, #EMIF_PM_RUN_HW_LEVELING]
blx r1
#ifdef CONFIG_CACHE_L2X0
ldr r2, l2_cache_base
ldr r0, [r2, #L2X0_CTRL]
and r0, #0x0f
cmp r0, #1
beq skip_l2en @ Skip if already enabled
adr r4, am43xx_pm_ro_sram_data
ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET]
ldr r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]
ldr r12, l2_smc1
dsb
smc #0
dsb
set_aux_ctrl:
ldr r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
ldr r12, l2_smc2
dsb
smc #0
dsb
/* L2 invalidate on resume */
ldr r0, l2_val
ldr r2, l2_cache_base
str r0, [r2, #L2X0_INV_WAY]
wait2:
ldr r0, [r2, #L2X0_INV_WAY]
ldr r1, l2_val
ands r0, r0, r1
bne wait2
#ifdef CONFIG_PL310_ERRATA_727915
mov r0, #0x00
mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
dsb
smc #0
dsb
#endif
l2x_sync2:
ldr r2, l2_cache_base
mov r0, #0x0
str r0, [r2, #L2X0_CACHE_SYNC]
sync2:
ldr r0, [r2, #L2X0_CACHE_SYNC]
ands r0, r0, #0x1
bne sync2
mov r0, #0x1
ldr r12, l2_smc3
dsb
smc #0
dsb
#endif
skip_l2en:
/* We are back. Branch to the common CPU resume routine */
mov r0, #0
ldr pc, resume_addr
ENDPROC(am43xx_resume_from_deep_sleep)
/*
* Local variables
*/
.align
kernel_flush:
.word v7_flush_dcache_all
ddr_start:
.word PAGE_OFFSET
am43xx_phys_emif_poweroff:
.word (AM43XX_CM_BASE + AM43XX_PRM_DEVICE_INST + \
AM43XX_PRM_EMIF_CTRL_OFFSET)
am43xx_virt_mpu_clkstctrl:
.word (AM43XX_CM_MPU_CLKSTCTRL)
am43xx_virt_mpu_clkctrl:
.word (AM43XX_CM_MPU_MPU_CLKCTRL)
am43xx_virt_emif_clkctrl:
.word (AM43XX_CM_PER_EMIF_CLKCTRL)
am43xx_phys_emif_clkctrl:
.word (AM43XX_CM_BASE + AM43XX_CM_PER_INST + \
AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
#ifdef CONFIG_CACHE_L2X0
/* L2 cache related defines for AM437x */
get_l2cache_base:
.word omap4_get_l2cache_base
l2_cache_base:
.word OMAP44XX_L2CACHE_BASE
l2_smc1:
.word OMAP4_MON_L2X0_PREFETCH_INDEX
l2_smc2:
.word OMAP4_MON_L2X0_AUXCTRL_INDEX
l2_smc3:
.word OMAP4_MON_L2X0_CTRL_INDEX
l2_val:
.word 0xffff
#endif
.align 3
/* DDR related defines */
ENTRY(am43xx_emif_sram_table)
.space EMIF_PM_FUNCTIONS_SIZE
ENTRY(am43xx_pm_sram)
.word am43xx_do_wfi
.word am43xx_do_wfi_sz
.word am43xx_resume_offset
.word am43xx_emif_sram_table
.word am43xx_pm_ro_sram_data
resume_addr:
.word cpu_resume - PAGE_OFFSET + 0x80000000
.align 3
ENTRY(am43xx_pm_ro_sram_data)
.space AMX3_PM_RO_SRAM_DATA_SIZE
ENTRY(am43xx_do_wfi_sz)
.word . - am43xx_do_wfi
Reference in New Issue View Git Blame Copy Permalink