mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 03:56:44 +07:00
faa3185114
Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
84 lines
1.7 KiB
Plaintext
84 lines
1.7 KiB
Plaintext
Texas Instruments VPIF
|
|
----------------------
|
|
|
|
The TI Video Port InterFace (VPIF) is the primary component for video
|
|
capture and display on the DA850/AM18x family of TI DaVinci/Sitara
|
|
SoCs.
|
|
|
|
TI Document reference: SPRUH82C, Chapter 35
|
|
http://www.ti.com/lit/pdf/spruh82
|
|
|
|
Required properties:
|
|
- compatible: must be "ti,da850-vpif"
|
|
- reg: physical base address and length of the registers set for the device;
|
|
- interrupts: should contain IRQ line for the VPIF
|
|
|
|
Video Capture:
|
|
|
|
VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a
|
|
single 16-bit channel. It should contain at least one port child node
|
|
with child 'endpoint' node. Please refer to the bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example using 2 8-bit input channels, one of which is connected to an
|
|
I2C-connected TVP5147 decoder:
|
|
|
|
vpif: vpif@217000 {
|
|
compatible = "ti,da850-vpif";
|
|
reg = <0x217000 0x1000>;
|
|
interrupts = <92>;
|
|
|
|
port {
|
|
vpif_ch0: endpoint@0 {
|
|
reg = <0>;
|
|
bus-width = <8>;
|
|
remote-endpoint = <&composite>;
|
|
};
|
|
|
|
vpif_ch1: endpoint@1 {
|
|
reg = <1>;
|
|
bus-width = <8>;
|
|
data-shift = <8>;
|
|
};
|
|
};
|
|
};
|
|
|
|
[ ... ]
|
|
|
|
&i2c0 {
|
|
|
|
tvp5147@5d {
|
|
compatible = "ti,tvp5147";
|
|
reg = <0x5d>;
|
|
status = "okay";
|
|
|
|
port {
|
|
composite: endpoint {
|
|
hsync-active = <1>;
|
|
vsync-active = <1>;
|
|
pclk-sample = <0>;
|
|
|
|
/* VPIF channel 0 (lower 8-bits) */
|
|
remote-endpoint = <&vpif_ch0>;
|
|
bus-width = <8>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
Alternatively, an example when the bus is configured as a single
|
|
16-bit input (e.g. for raw-capture mode):
|
|
|
|
vpif: vpif@217000 {
|
|
compatible = "ti,da850-vpif";
|
|
reg = <0x217000 0x1000>;
|
|
interrupts = <92>;
|
|
|
|
port {
|
|
vpif_ch0: endpoint {
|
|
bus-width = <16>;
|
|
};
|
|
};
|
|
};
|