mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 19:20:55 +07:00
87838addf6
Add the document for ov2640 dt. Cc: devicetree@vger.kernel.org Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
47 lines
1.2 KiB
Plaintext
47 lines
1.2 KiB
Plaintext
* Omnivision OV2640 CMOS sensor
|
|
|
|
The Omnivision OV2640 sensor support multiple resolutions output, such as
|
|
CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
|
|
output format.
|
|
|
|
Required Properties:
|
|
- compatible: should be "ovti,ov2640"
|
|
- clocks: reference to the xvclk input clock.
|
|
- clock-names: should be "xvclk".
|
|
|
|
Optional Properties:
|
|
- resetb-gpios: reference to the GPIO connected to the resetb pin, if any.
|
|
- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any.
|
|
|
|
The device node must contain one 'port' child node for its digital output
|
|
video port, in accordance with the video interface bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example:
|
|
|
|
i2c1: i2c@f0018000 {
|
|
ov2640: camera@0x30 {
|
|
compatible = "ovti,ov2640";
|
|
reg = <0x30>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pck1 &pinctrl_ov2640_pwdn &pinctrl_ov2640_resetb>;
|
|
|
|
resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
|
|
pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
|
|
|
|
clocks = <&pck1>;
|
|
clock-names = "xvclk";
|
|
|
|
assigned-clocks = <&pck1>;
|
|
assigned-clock-rates = <25000000>;
|
|
|
|
port {
|
|
ov2640_0: endpoint {
|
|
remote-endpoint = <&isi_0>;
|
|
bus-width = <8>;
|
|
};
|
|
};
|
|
};
|
|
};
|