AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
be3d7f7cb3
linux_dsm_epyc7002/drivers/net/can/sja1000/ems_pci.c
Thomas Gleixner 35e62ae830 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 344 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the version 2 of the gnu general public
  license as published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 15 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000437.427740574@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:07 +02:00

362 lines
9.3 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
* Copyright (C) 2008 Markus Plessing <plessing@ems-wuensche.com>
* Copyright (C) 2008 Sebastian Haas <haas@ems-wuensche.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/can/dev.h>
#include <linux/io.h>
#include "sja1000.h"
#define DRV_NAME "ems_pci"
MODULE_AUTHOR("Sebastian Haas <haas@ems-wuenche.com>");
MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe/104P CAN cards");
MODULE_SUPPORTED_DEVICE("EMS CPC-PCI/PCIe/104P CAN card");
MODULE_LICENSE("GPL v2");
#define EMS_PCI_V1_MAX_CHAN 2
#define EMS_PCI_V2_MAX_CHAN 4
#define EMS_PCI_MAX_CHAN EMS_PCI_V2_MAX_CHAN
struct ems_pci_card {
int version;
int channels;
struct pci_dev *pci_dev;
struct net_device *net_dev[EMS_PCI_MAX_CHAN];
void __iomem *conf_addr;
void __iomem *base_addr;
};
#define EMS_PCI_CAN_CLOCK (16000000 / 2)
/*
* Register definitions and descriptions are from LinCAN 0.3.3.
*
* PSB4610 PITA-2 bridge control registers
*/
#define PITA2_ICR 0x00 /* Interrupt Control Register */
#define PITA2_ICR_INT0 0x00000002 /* [RC] INT0 Active/Clear */
#define PITA2_ICR_INT0_EN 0x00020000 /* [RW] Enable INT0 */
#define PITA2_MISC 0x1c /* Miscellaneous Register */
#define PITA2_MISC_CONFIG 0x04000000 /* Multiplexed parallel interface */
/*
* Register definitions for the PLX 9030
*/
#define PLX_ICSR 0x4c /* Interrupt Control/Status register */
#define PLX_ICSR_LINTI1_ENA 0x0001 /* LINTi1 Enable */
#define PLX_ICSR_PCIINT_ENA 0x0040 /* PCI Interrupt Enable */
#define PLX_ICSR_LINTI1_CLR 0x0400 /* Local Edge Triggerable Interrupt Clear */
#define PLX_ICSR_ENA_CLR (PLX_ICSR_LINTI1_ENA | PLX_ICSR_PCIINT_ENA | \
PLX_ICSR_LINTI1_CLR)
/*
* The board configuration is probably following:
* RX1 is connected to ground.
* TX1 is not connected.
* CLKO is not connected.
* Setting the OCR register to 0xDA is a good idea.
* This means normal output mode, push-pull and the correct polarity.
*/
#define EMS_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
/*
* In the CDR register, you should set CBP to 1.
* You will probably also want to set the clock divider value to 7
* (meaning direct oscillator output) because the second SJA1000 chip
* is driven by the first one CLKOUT output.
*/
#define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK)
#define EMS_PCI_V1_BASE_BAR 1
#define EMS_PCI_V1_CONF_SIZE 4096 /* size of PITA control area */
#define EMS_PCI_V2_BASE_BAR 2
#define EMS_PCI_V2_CONF_SIZE 128 /* size of PLX control area */
#define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */
#define EMS_PCI_CAN_CTRL_SIZE 0x200 /* memory size for each controller */
#define EMS_PCI_BASE_SIZE 4096 /* size of controller area */
static const struct pci_device_id ems_pci_tbl[] = {
/* CPC-PCI v1 */
{PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,},
/* CPC-PCI v2 */
{PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_PLX, 0x4000},
/* CPC-104P v2 */
{PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_PLX, 0x4002},
{0,}
};
MODULE_DEVICE_TABLE(pci, ems_pci_tbl);
/*
* Helper to read internal registers from card logic (not CAN)
*/
static u8 ems_pci_v1_readb(struct ems_pci_card *card, unsigned int port)
{
return readb(card->base_addr + (port * 4));
}
static u8 ems_pci_v1_read_reg(const struct sja1000_priv *priv, int port)
{
return readb(priv->reg_base + (port * 4));
}
static void ems_pci_v1_write_reg(const struct sja1000_priv *priv,
int port, u8 val)
{
writeb(val, priv->reg_base + (port * 4));
}
static void ems_pci_v1_post_irq(const struct sja1000_priv *priv)
{
struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
/* reset int flag of pita */
writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0,
card->conf_addr + PITA2_ICR);
}
static u8 ems_pci_v2_read_reg(const struct sja1000_priv *priv, int port)
{
return readb(priv->reg_base + port);
}
static void ems_pci_v2_write_reg(const struct sja1000_priv *priv,
int port, u8 val)
{
writeb(val, priv->reg_base + port);
}
static void ems_pci_v2_post_irq(const struct sja1000_priv *priv)
{
struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
writel(PLX_ICSR_ENA_CLR, card->conf_addr + PLX_ICSR);
}
/*
* Check if a CAN controller is present at the specified location
* by trying to set 'em into the PeliCAN mode
*/
static inline int ems_pci_check_chan(const struct sja1000_priv *priv)
{
unsigned char res;
/* Make sure SJA1000 is in reset mode */
priv->write_reg(priv, SJA1000_MOD, 1);
priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN);
/* read reset-values */
res = priv->read_reg(priv, SJA1000_CDR);
if (res == CDR_PELICAN)
return 1;
return 0;
}
static void ems_pci_del_card(struct pci_dev *pdev)
{
struct ems_pci_card *card = pci_get_drvdata(pdev);
struct net_device *dev;
int i = 0;
for (i = 0; i < card->channels; i++) {
dev = card->net_dev[i];
if (!dev)
continue;
dev_info(&pdev->dev, "Removing %s.\n", dev->name);
unregister_sja1000dev(dev);
free_sja1000dev(dev);
}
if (card->base_addr != NULL)
pci_iounmap(card->pci_dev, card->base_addr);
if (card->conf_addr != NULL)
pci_iounmap(card->pci_dev, card->conf_addr);
kfree(card);
pci_disable_device(pdev);
}
static void ems_pci_card_reset(struct ems_pci_card *card)
{
/* Request board reset */
writeb(0, card->base_addr);
}
/*
* Probe PCI device for EMS CAN signature and register each available
* CAN channel to SJA1000 Socket-CAN subsystem.
*/
static int ems_pci_add_card(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct sja1000_priv *priv;
struct net_device *dev;
struct ems_pci_card *card;
int max_chan, conf_size, base_bar;
int err, i;
/* Enabling PCI device */
if (pci_enable_device(pdev) < 0) {
dev_err(&pdev->dev, "Enabling PCI device failed\n");
return -ENODEV;
}
/* Allocating card structures to hold addresses, ... */
card = kzalloc(sizeof(struct ems_pci_card), GFP_KERNEL);
if (card == NULL) {
pci_disable_device(pdev);
return -ENOMEM;
}
pci_set_drvdata(pdev, card);
card->pci_dev = pdev;
card->channels = 0;
if (pdev->vendor == PCI_VENDOR_ID_PLX) {
card->version = 2; /* CPC-PCI v2 */
max_chan = EMS_PCI_V2_MAX_CHAN;
base_bar = EMS_PCI_V2_BASE_BAR;
conf_size = EMS_PCI_V2_CONF_SIZE;
} else {
card->version = 1; /* CPC-PCI v1 */
max_chan = EMS_PCI_V1_MAX_CHAN;
base_bar = EMS_PCI_V1_BASE_BAR;
conf_size = EMS_PCI_V1_CONF_SIZE;
}
/* Remap configuration space and controller memory area */
card->conf_addr = pci_iomap(pdev, 0, conf_size);
if (card->conf_addr == NULL) {
err = -ENOMEM;
goto failure_cleanup;
}
card->base_addr = pci_iomap(pdev, base_bar, EMS_PCI_BASE_SIZE);
if (card->base_addr == NULL) {
err = -ENOMEM;
goto failure_cleanup;
}
if (card->version == 1) {
/* Configure PITA-2 parallel interface (enable MUX) */
writel(PITA2_MISC_CONFIG, card->conf_addr + PITA2_MISC);
/* Check for unique EMS CAN signature */
if (ems_pci_v1_readb(card, 0) != 0x55 ||
ems_pci_v1_readb(card, 1) != 0xAA ||
ems_pci_v1_readb(card, 2) != 0x01 ||
ems_pci_v1_readb(card, 3) != 0xCB ||
ems_pci_v1_readb(card, 4) != 0x11) {
dev_err(&pdev->dev,
"Not EMS Dr. Thomas Wuensche interface\n");
err = -ENODEV;
goto failure_cleanup;
}
}
ems_pci_card_reset(card);
/* Detect available channels */
for (i = 0; i < max_chan; i++) {
dev = alloc_sja1000dev(0);
if (dev == NULL) {
err = -ENOMEM;
goto failure_cleanup;
}
card->net_dev[i] = dev;
priv = netdev_priv(dev);
priv->priv = card;
priv->irq_flags = IRQF_SHARED;
dev->irq = pdev->irq;
priv->reg_base = card->base_addr + EMS_PCI_CAN_BASE_OFFSET
+ (i * EMS_PCI_CAN_CTRL_SIZE);
if (card->version == 1) {
priv->read_reg = ems_pci_v1_read_reg;
priv->write_reg = ems_pci_v1_write_reg;
priv->post_irq = ems_pci_v1_post_irq;
} else {
priv->read_reg = ems_pci_v2_read_reg;
priv->write_reg = ems_pci_v2_write_reg;
priv->post_irq = ems_pci_v2_post_irq;
}
/* Check if channel is present */
if (ems_pci_check_chan(priv)) {
priv->can.clock.freq = EMS_PCI_CAN_CLOCK;
priv->ocr = EMS_PCI_OCR;
priv->cdr = EMS_PCI_CDR;
SET_NETDEV_DEV(dev, &pdev->dev);
dev->dev_id = i;
if (card->version == 1)
/* reset int flag of pita */
writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0,
card->conf_addr + PITA2_ICR);
else
/* enable IRQ in PLX 9030 */
writel(PLX_ICSR_ENA_CLR,
card->conf_addr + PLX_ICSR);
/* Register SJA1000 device */
err = register_sja1000dev(dev);
if (err) {
dev_err(&pdev->dev, "Registering device failed "
"(err=%d)\n", err);
free_sja1000dev(dev);
goto failure_cleanup;
}
card->channels++;
dev_info(&pdev->dev, "Channel #%d at 0x%p, irq %d\n",
i + 1, priv->reg_base, dev->irq);
} else {
free_sja1000dev(dev);
}
}
return 0;
failure_cleanup:
dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);
ems_pci_del_card(pdev);
return err;
}
static struct pci_driver ems_pci_driver = {
.name = DRV_NAME,
.id_table = ems_pci_tbl,
.probe = ems_pci_add_card,
.remove = ems_pci_del_card,
};
module_pci_driver(ems_pci_driver);
Reference in New Issue View Git Blame Copy Permalink