mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 06:46:38 +07:00
bde435a9ca
This patch adds spi->mode support for the AMBA pl022 driver and allows spidev to correctly alter SPI modes. Unused fields used in the pl022 header file for the pl022_config_chip have been removed. The ab8500 client driver selects the data transfer size instead of the platform data. For platforms that use the amba pl022 driver, the unused fields in the controller data structure have been removed and the .mode field in the SPI board info structure is used instead. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
295 lines
8.7 KiB
C
295 lines
8.7 KiB
C
/*
|
|
* include/linux/amba/pl022.h
|
|
*
|
|
* Copyright (C) 2008-2009 ST-Ericsson AB
|
|
* Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
|
|
*
|
|
* Author: Linus Walleij <linus.walleij@stericsson.com>
|
|
*
|
|
* Initial version inspired by:
|
|
* linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
|
|
* Initial adoption to PL022 by:
|
|
* Sachin Verma <sachin.verma@st.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef _SSP_PL022_H
|
|
#define _SSP_PL022_H
|
|
|
|
#include <linux/device.h>
|
|
|
|
/**
|
|
* whether SSP is in loopback mode or not
|
|
*/
|
|
enum ssp_loopback {
|
|
LOOPBACK_DISABLED,
|
|
LOOPBACK_ENABLED
|
|
};
|
|
|
|
/**
|
|
* enum ssp_interface - interfaces allowed for this SSP Controller
|
|
* @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
|
|
* @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
|
|
* interface
|
|
* @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
|
|
* interface
|
|
* @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
|
|
* &STn8815 only)
|
|
*/
|
|
enum ssp_interface {
|
|
SSP_INTERFACE_MOTOROLA_SPI,
|
|
SSP_INTERFACE_TI_SYNC_SERIAL,
|
|
SSP_INTERFACE_NATIONAL_MICROWIRE,
|
|
SSP_INTERFACE_UNIDIRECTIONAL
|
|
};
|
|
|
|
/**
|
|
* enum ssp_hierarchy - whether SSP is configured as Master or Slave
|
|
*/
|
|
enum ssp_hierarchy {
|
|
SSP_MASTER,
|
|
SSP_SLAVE
|
|
};
|
|
|
|
/**
|
|
* enum ssp_clock_params - clock parameters, to set SSP clock at a
|
|
* desired freq
|
|
*/
|
|
struct ssp_clock_params {
|
|
u8 cpsdvsr; /* value from 2 to 254 (even only!) */
|
|
u8 scr; /* value from 0 to 255 */
|
|
};
|
|
|
|
/**
|
|
* enum ssp_rx_endian - endianess of Rx FIFO Data
|
|
* this feature is only available in ST versionf of PL022
|
|
*/
|
|
enum ssp_rx_endian {
|
|
SSP_RX_MSB,
|
|
SSP_RX_LSB
|
|
};
|
|
|
|
/**
|
|
* enum ssp_tx_endian - endianess of Tx FIFO Data
|
|
*/
|
|
enum ssp_tx_endian {
|
|
SSP_TX_MSB,
|
|
SSP_TX_LSB
|
|
};
|
|
|
|
/**
|
|
* enum ssp_data_size - number of bits in one data element
|
|
*/
|
|
enum ssp_data_size {
|
|
SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
|
|
SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
|
|
SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
|
|
SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
|
|
SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
|
|
SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
|
|
SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
|
|
SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
|
|
SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
|
|
SSP_DATA_BITS_31, SSP_DATA_BITS_32
|
|
};
|
|
|
|
/**
|
|
* enum ssp_mode - SSP mode of operation (Communication modes)
|
|
*/
|
|
enum ssp_mode {
|
|
INTERRUPT_TRANSFER,
|
|
POLLING_TRANSFER,
|
|
DMA_TRANSFER
|
|
};
|
|
|
|
/**
|
|
* enum ssp_rx_level_trig - receive FIFO watermark level which triggers
|
|
* IT: Interrupt fires when _N_ or more elements in RX FIFO.
|
|
*/
|
|
enum ssp_rx_level_trig {
|
|
SSP_RX_1_OR_MORE_ELEM,
|
|
SSP_RX_4_OR_MORE_ELEM,
|
|
SSP_RX_8_OR_MORE_ELEM,
|
|
SSP_RX_16_OR_MORE_ELEM,
|
|
SSP_RX_32_OR_MORE_ELEM
|
|
};
|
|
|
|
/**
|
|
* Transmit FIFO watermark level which triggers (IT Interrupt fires
|
|
* when _N_ or more empty locations in TX FIFO)
|
|
*/
|
|
enum ssp_tx_level_trig {
|
|
SSP_TX_1_OR_MORE_EMPTY_LOC,
|
|
SSP_TX_4_OR_MORE_EMPTY_LOC,
|
|
SSP_TX_8_OR_MORE_EMPTY_LOC,
|
|
SSP_TX_16_OR_MORE_EMPTY_LOC,
|
|
SSP_TX_32_OR_MORE_EMPTY_LOC
|
|
};
|
|
|
|
/**
|
|
* enum SPI Clock Phase - clock phase (Motorola SPI interface only)
|
|
* @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity)
|
|
* @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity)
|
|
*/
|
|
enum ssp_spi_clk_phase {
|
|
SSP_CLK_FIRST_EDGE,
|
|
SSP_CLK_SECOND_EDGE
|
|
};
|
|
|
|
/**
|
|
* enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
|
|
* @SSP_CLK_POL_IDLE_LOW: Low inactive level
|
|
* @SSP_CLK_POL_IDLE_HIGH: High inactive level
|
|
*/
|
|
enum ssp_spi_clk_pol {
|
|
SSP_CLK_POL_IDLE_LOW,
|
|
SSP_CLK_POL_IDLE_HIGH
|
|
};
|
|
|
|
/**
|
|
* Microwire Conrol Lengths Command size in microwire format
|
|
*/
|
|
enum ssp_microwire_ctrl_len {
|
|
SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
|
|
SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
|
|
SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
|
|
SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
|
|
SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
|
|
SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
|
|
SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
|
|
SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
|
|
SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
|
|
SSP_BITS_31, SSP_BITS_32
|
|
};
|
|
|
|
/**
|
|
* enum Microwire Wait State
|
|
* @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
|
|
* @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
|
|
*/
|
|
enum ssp_microwire_wait_state {
|
|
SSP_MWIRE_WAIT_ZERO,
|
|
SSP_MWIRE_WAIT_ONE
|
|
};
|
|
|
|
/**
|
|
* enum ssp_duplex - whether Full/Half Duplex on microwire, only
|
|
* available in the ST Micro variant.
|
|
* @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
|
|
* SSPRXD not used
|
|
* @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
|
|
* an input.
|
|
*/
|
|
enum ssp_duplex {
|
|
SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
|
|
SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
|
|
};
|
|
|
|
/**
|
|
* enum ssp_clkdelay - an optional clock delay on the feedback clock
|
|
* only available in the ST Micro PL023 variant.
|
|
* @SSP_FEEDBACK_CLK_DELAY_NONE: no delay, the data coming in from the
|
|
* slave is sampled directly
|
|
* @SSP_FEEDBACK_CLK_DELAY_1T: the incoming slave data is sampled with
|
|
* a delay of T-dt
|
|
* @SSP_FEEDBACK_CLK_DELAY_2T: dito with a delay if 2T-dt
|
|
* @SSP_FEEDBACK_CLK_DELAY_3T: dito with a delay if 3T-dt
|
|
* @SSP_FEEDBACK_CLK_DELAY_4T: dito with a delay if 4T-dt
|
|
* @SSP_FEEDBACK_CLK_DELAY_5T: dito with a delay if 5T-dt
|
|
* @SSP_FEEDBACK_CLK_DELAY_6T: dito with a delay if 6T-dt
|
|
* @SSP_FEEDBACK_CLK_DELAY_7T: dito with a delay if 7T-dt
|
|
*/
|
|
enum ssp_clkdelay {
|
|
SSP_FEEDBACK_CLK_DELAY_NONE,
|
|
SSP_FEEDBACK_CLK_DELAY_1T,
|
|
SSP_FEEDBACK_CLK_DELAY_2T,
|
|
SSP_FEEDBACK_CLK_DELAY_3T,
|
|
SSP_FEEDBACK_CLK_DELAY_4T,
|
|
SSP_FEEDBACK_CLK_DELAY_5T,
|
|
SSP_FEEDBACK_CLK_DELAY_6T,
|
|
SSP_FEEDBACK_CLK_DELAY_7T
|
|
};
|
|
|
|
/**
|
|
* CHIP select/deselect commands
|
|
*/
|
|
enum ssp_chip_select {
|
|
SSP_CHIP_SELECT,
|
|
SSP_CHIP_DESELECT
|
|
};
|
|
|
|
|
|
struct dma_chan;
|
|
/**
|
|
* struct pl022_ssp_master - device.platform_data for SPI controller devices.
|
|
* @num_chipselect: chipselects are used to distinguish individual
|
|
* SPI slaves, and are numbered from zero to num_chipselects - 1.
|
|
* each slave has a chipselect signal, but it's common that not
|
|
* every chipselect is connected to a slave.
|
|
* @enable_dma: if true enables DMA driven transfers.
|
|
* @dma_rx_param: parameter to locate an RX DMA channel.
|
|
* @dma_tx_param: parameter to locate a TX DMA channel.
|
|
*/
|
|
struct pl022_ssp_controller {
|
|
u16 bus_id;
|
|
u8 num_chipselect;
|
|
u8 enable_dma:1;
|
|
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
|
|
void *dma_rx_param;
|
|
void *dma_tx_param;
|
|
};
|
|
|
|
/**
|
|
* struct ssp_config_chip - spi_board_info.controller_data for SPI
|
|
* slave devices, copied to spi_device.controller_data.
|
|
*
|
|
* @lbm: used for test purpose to internally connect RX and TX
|
|
* @iface: Interface type(Motorola, TI, Microwire, Universal)
|
|
* @hierarchy: sets whether interface is master or slave
|
|
* @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
|
|
* @clk_freq: Tune freq parameters of SSP(when in master mode)
|
|
* @endian_rx: Endianess of Data in Rx FIFO
|
|
* @endian_tx: Endianess of Data in Tx FIFO
|
|
* @data_size: Width of data element(4 to 32 bits)
|
|
* @com_mode: communication mode: polling, Interrupt or DMA
|
|
* @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
|
|
* @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
|
|
* @clk_phase: Motorola SPI interface Clock phase
|
|
* @clk_pol: Motorola SPI interface Clock polarity
|
|
* @ctrl_len: Microwire interface: Control length
|
|
* @wait_state: Microwire interface: Wait state
|
|
* @duplex: Microwire interface: Full/Half duplex
|
|
* @clkdelay: on the PL023 variant, the delay in feeback clock cycles
|
|
* before sampling the incoming line
|
|
* @cs_control: function pointer to board-specific function to
|
|
* assert/deassert I/O port to control HW generation of devices chip-select.
|
|
* @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
|
|
* @dma_config: DMA configuration for SSP controller and peripheral
|
|
*/
|
|
struct pl022_config_chip {
|
|
struct device *dev;
|
|
enum ssp_interface iface;
|
|
enum ssp_hierarchy hierarchy;
|
|
bool slave_tx_disable;
|
|
struct ssp_clock_params clk_freq;
|
|
enum ssp_mode com_mode;
|
|
enum ssp_rx_level_trig rx_lev_trig;
|
|
enum ssp_tx_level_trig tx_lev_trig;
|
|
enum ssp_microwire_ctrl_len ctrl_len;
|
|
enum ssp_microwire_wait_state wait_state;
|
|
enum ssp_duplex duplex;
|
|
enum ssp_clkdelay clkdelay;
|
|
void (*cs_control) (u32 control);
|
|
};
|
|
|
|
#endif /* _SSP_PL022_H */
|