linux_dsm_epyc7002/drivers/net/wireless/prism54/islpci_eth.c
Jeff Kirsher 4280db9d00 prism54: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: linux-wireless@vger.kernel.org
CC: "Luis R. Rodriguez" <mcgrof@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-11 10:56:20 -05:00

507 lines
15 KiB
C

/*
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <asm/byteorder.h>
#include "prismcompat.h"
#include "isl_38xx.h"
#include "islpci_eth.h"
#include "islpci_mgt.h"
#include "oid_mgt.h"
/******************************************************************************
Network Interface functions
******************************************************************************/
void
islpci_eth_cleanup_transmit(islpci_private *priv,
isl38xx_control_block *control_block)
{
struct sk_buff *skb;
u32 index;
/* compare the control block read pointer with the free pointer */
while (priv->free_data_tx !=
le32_to_cpu(control_block->
device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) {
/* read the index of the first fragment to be freed */
index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE;
/* check for holes in the arrays caused by multi fragment frames
* searching for the last fragment of a frame */
if (priv->pci_map_tx_address[index]) {
/* entry is the last fragment of a frame
* free the skb structure and unmap pci memory */
skb = priv->data_low_tx[index];
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"cleanup skb %p skb->data %p skb->len %u truesize %u\n ",
skb, skb->data, skb->len, skb->truesize);
#endif
pci_unmap_single(priv->pdev,
priv->pci_map_tx_address[index],
skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb_irq(skb);
skb = NULL;
}
/* increment the free data low queue pointer */
priv->free_data_tx++;
}
}
netdev_tx_t
islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
{
islpci_private *priv = netdev_priv(ndev);
isl38xx_control_block *cb = priv->control_block;
u32 index;
dma_addr_t pci_map_address;
int frame_size;
isl38xx_fragment *fragment;
int offset;
struct sk_buff *newskb;
int newskb_offset;
unsigned long flags;
unsigned char wds_mac[6];
u32 curr_frag;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
#endif
/* lock the driver code */
spin_lock_irqsave(&priv->slock, flags);
/* check whether the destination queue has enough fragments for the frame */
curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
printk(KERN_ERR "%s: transmit device queue full when awake\n",
ndev->name);
netif_stop_queue(ndev);
/* trigger the device */
isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
ISL38XX_DEV_INT_REG);
udelay(ISL38XX_WRITEIO_DELAY);
goto drop_free;
}
/* Check alignment and WDS frame formatting. The start of the packet should
* be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
* and add WDS address information */
if (likely(((long) skb->data & 0x03) | init_wds)) {
/* get the number of bytes to add and re-align */
offset = (4 - (long) skb->data) & 0x03;
offset += init_wds ? 6 : 0;
/* check whether the current skb can be used */
if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
unsigned char *src = skb->data;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset,
init_wds);
#endif
/* align the buffer on 4-byte boundary */
skb_reserve(skb, (4 - (long) skb->data) & 0x03);
if (init_wds) {
/* wds requires an additional address field of 6 bytes */
skb_put(skb, 6);
#ifdef ISLPCI_ETH_DEBUG
printk("islpci_eth_transmit:wds_mac\n");
#endif
memmove(skb->data + 6, src, skb->len);
skb_copy_to_linear_data(skb, wds_mac, 6);
} else {
memmove(skb->data, src, skb->len);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
src, skb->len);
#endif
} else {
newskb =
dev_alloc_skb(init_wds ? skb->len + 6 : skb->len);
if (unlikely(newskb == NULL)) {
printk(KERN_ERR "%s: Cannot allocate skb\n",
ndev->name);
goto drop_free;
}
newskb_offset = (4 - (long) newskb->data) & 0x03;
/* Check if newskb->data is aligned */
if (newskb_offset)
skb_reserve(newskb, newskb_offset);
skb_put(newskb, init_wds ? skb->len + 6 : skb->len);
if (init_wds) {
skb_copy_from_linear_data(skb,
newskb->data + 6,
skb->len);
skb_copy_to_linear_data(newskb, wds_mac, 6);
#ifdef ISLPCI_ETH_DEBUG
printk("islpci_eth_transmit:wds_mac\n");
#endif
} else
skb_copy_from_linear_data(skb, newskb->data,
skb->len);
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n",
newskb->data, skb->data, skb->len, init_wds);
#endif
newskb->dev = skb->dev;
dev_kfree_skb_irq(skb);
skb = newskb;
}
}
/* display the buffer contents for debugging */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* map the skb buffer to pci memory for DMA operation */
pci_map_address = pci_map_single(priv->pdev,
(void *) skb->data, skb->len,
PCI_DMA_TODEVICE);
if (unlikely(pci_map_address == 0)) {
printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
ndev->name);
goto drop_free;
}
/* Place the fragment in the control block structure. */
index = curr_frag % ISL38XX_CB_TX_QSIZE;
fragment = &cb->tx_data_low[index];
priv->pci_map_tx_address[index] = pci_map_address;
/* store the skb address for future freeing */
priv->data_low_tx[index] = skb;
/* set the proper fragment start address and size information */
frame_size = skb->len;
fragment->size = cpu_to_le16(frame_size);
fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
fragment->address = cpu_to_le32(pci_map_address);
curr_frag++;
/* The fragment address in the control block must have been
* written before announcing the frame buffer to device. */
wmb();
cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag);
if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD
> ISL38XX_CB_TX_QSIZE) {
/* stop sends from upper layers */
netif_stop_queue(ndev);
/* set the full flag for the transmission queue */
priv->data_low_tx_full = 1;
}
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += skb->len;
/* trigger the device */
islpci_trigger(priv);
/* unlock the driver code */
spin_unlock_irqrestore(&priv->slock, flags);
return NETDEV_TX_OK;
drop_free:
ndev->stats.tx_dropped++;
spin_unlock_irqrestore(&priv->slock, flags);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
static inline int
islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb)
{
/* The card reports full 802.11 packets but with a 20 bytes
* header and without the FCS. But there a is a bit that
* indicates if the packet is corrupted :-) */
struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data;
if (hdr->flags & 0x01)
/* This one is bad. Drop it ! */
return -1;
if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) {
struct avs_80211_1_header *avs;
/* extract the relevant data from the header */
u32 clock = le32_to_cpu(hdr->clock);
u8 rate = hdr->rate;
u16 freq = le16_to_cpu(hdr->freq);
u8 rssi = hdr->rssi;
skb_pull(*skb, sizeof (struct rfmon_header));
if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) {
struct sk_buff *newskb = skb_copy_expand(*skb,
sizeof (struct
avs_80211_1_header),
0, GFP_ATOMIC);
if (newskb) {
dev_kfree_skb_irq(*skb);
*skb = newskb;
} else
return -1;
/* This behavior is not very subtile... */
}
/* make room for the new header and fill it. */
avs =
(struct avs_80211_1_header *) skb_push(*skb,
sizeof (struct
avs_80211_1_header));
avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
avs->mactime = cpu_to_be64(clock);
avs->hosttime = cpu_to_be64(jiffies);
avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */
avs->channel = cpu_to_be32(channel_of_freq(freq));
avs->datarate = cpu_to_be32(rate * 5);
avs->antenna = cpu_to_be32(0); /*unknown */
avs->priority = cpu_to_be32(0); /*unknown */
avs->ssi_type = cpu_to_be32(3); /*2: dBm, 3: raw RSSI */
avs->ssi_signal = cpu_to_be32(rssi & 0x7f);
avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise); /*better than 'undefined', I assume */
avs->preamble = cpu_to_be32(0); /*unknown */
avs->encoding = cpu_to_be32(0); /*unknown */
} else
skb_pull(*skb, sizeof (struct rfmon_header));
(*skb)->protocol = htons(ETH_P_802_2);
skb_reset_mac_header(*skb);
(*skb)->pkt_type = PACKET_OTHERHOST;
return 0;
}
int
islpci_eth_receive(islpci_private *priv)
{
struct net_device *ndev = priv->ndev;
isl38xx_control_block *control_block = priv->control_block;
struct sk_buff *skb;
u16 size;
u32 index, offset;
unsigned char *src;
int discard = 0;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
#endif
/* the device has written an Ethernet frame in the data area
* of the sk_buff without updating the structure, do it now */
index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE;
size = le16_to_cpu(control_block->rx_data_low[index].size);
skb = priv->data_low_rx[index];
offset = ((unsigned long)
le32_to_cpu(control_block->rx_data_low[index].address) -
(unsigned long) skb->data) & 3;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ",
control_block->rx_data_low[priv->free_data_rx].address, skb->data,
skb->len, offset, skb->truesize);
#endif
/* delete the streaming DMA mapping before processing the skb */
pci_unmap_single(priv->pdev,
priv->pci_map_rx_address[index],
MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);
/* update the skb structure and align the buffer */
skb_put(skb, size);
if (offset) {
/* shift the buffer allocation offset bytes to get the right frame */
skb_pull(skb, 2);
skb_put(skb, 2);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
/* display the buffer contents for debugging */
DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* check whether WDS is enabled and whether the data frame is a WDS frame */
if (init_wds) {
/* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
src = skb->data + 6;
memmove(skb->data, src, skb->len - 6);
skb_trim(skb, skb->len - 6);
}
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb);
DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len);
/* display the buffer contents for debugging */
DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
display_buffer((char *) skb->data, skb->len);
#endif
/* take care of monitor mode and spy monitoring. */
if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) {
skb->dev = ndev;
discard = islpci_monitor_rx(priv, &skb);
} else {
if (unlikely(skb->data[2 * ETH_ALEN] == 0)) {
/* The packet has a rx_annex. Read it for spy monitoring, Then
* remove it, while keeping the 2 leading MAC addr.
*/
struct iw_quality wstats;
struct rx_annex_header *annex =
(struct rx_annex_header *) skb->data;
wstats.level = annex->rfmon.rssi;
/* The noise value can be a bit outdated if nobody's
* reading wireless stats... */
wstats.noise = priv->local_iwstatistics.qual.noise;
wstats.qual = wstats.level - wstats.noise;
wstats.updated = 0x07;
/* Update spy records */
wireless_spy_update(ndev, annex->addr2, &wstats);
skb_copy_from_linear_data(skb,
(skb->data +
sizeof(struct rfmon_header)),
2 * ETH_ALEN);
skb_pull(skb, sizeof (struct rfmon_header));
}
skb->protocol = eth_type_trans(skb, ndev);
}
skb->ip_summed = CHECKSUM_NONE;
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += size;
/* deliver the skb to the network layer */
#ifdef ISLPCI_ETH_DEBUG
printk
("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
skb->data[0], skb->data[1], skb->data[2], skb->data[3],
skb->data[4], skb->data[5]);
#endif
if (unlikely(discard)) {
dev_kfree_skb_irq(skb);
skb = NULL;
} else
netif_rx(skb);
/* increment the read index for the rx data low queue */
priv->free_data_rx++;
/* add one or more sk_buff structures */
while (index =
le32_to_cpu(control_block->
driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]),
index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) {
/* allocate an sk_buff for received data frames storage
* include any required allignment operations */
skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
if (unlikely(skb == NULL)) {
/* error allocating an sk_buff structure elements */
DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
break;
}
skb_reserve(skb, (4 - (long) skb->data) & 0x03);
/* store the new skb structure pointer */
index = index % ISL38XX_CB_RX_QSIZE;
priv->data_low_rx[index] = skb;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ",
skb, skb->data, skb->len, index, skb->truesize);
#endif
/* set the streaming DMA mapping for proper PCI bus operation */
priv->pci_map_rx_address[index] =
pci_map_single(priv->pdev, (void *) skb->data,
MAX_FRAGMENT_SIZE_RX + 2,
PCI_DMA_FROMDEVICE);
if (unlikely(!priv->pci_map_rx_address[index])) {
/* error mapping the buffer to device accessible memory address */
DEBUG(SHOW_ERROR_MESSAGES,
"Error mapping DMA address\n");
/* free the skbuf structure before aborting */
dev_kfree_skb_irq(skb);
skb = NULL;
break;
}
/* update the fragment address */
control_block->rx_data_low[index].address =
cpu_to_le32((u32)priv->pci_map_rx_address[index]);
wmb();
/* increment the driver read pointer */
le32_add_cpu(&control_block->
driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1);
}
/* trigger the device */
islpci_trigger(priv);
return 0;
}
void
islpci_do_reset_and_wake(struct work_struct *work)
{
islpci_private *priv = container_of(work, islpci_private, reset_task);
islpci_reset(priv, 1);
priv->reset_task_pending = 0;
smp_wmb();
netif_wake_queue(priv->ndev);
}
void
islpci_eth_tx_timeout(struct net_device *ndev)
{
islpci_private *priv = netdev_priv(ndev);
/* increment the transmit error counter */
ndev->stats.tx_errors++;
if (!priv->reset_task_pending) {
printk(KERN_WARNING
"%s: tx_timeout, scheduling reset", ndev->name);
netif_stop_queue(ndev);
priv->reset_task_pending = 1;
schedule_work(&priv->reset_task);
} else {
printk(KERN_WARNING
"%s: tx_timeout, waiting for reset", ndev->name);
}
}