mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 08:56:48 +07:00
b4f78259d5
Existing drivers and examples are updated to use the module_rpmsg_driver helper macro. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
282 lines
13 KiB
Plaintext
282 lines
13 KiB
Plaintext
Remote Processor Messaging (rpmsg) Framework
|
|
|
|
Note: this document describes the rpmsg bus and how to write rpmsg drivers.
|
|
To learn how to add rpmsg support for new platforms, check out remoteproc.txt
|
|
(also a resident of Documentation/).
|
|
|
|
1. Introduction
|
|
|
|
Modern SoCs typically employ heterogeneous remote processor devices in
|
|
asymmetric multiprocessing (AMP) configurations, which may be running
|
|
different instances of operating system, whether it's Linux or any other
|
|
flavor of real-time OS.
|
|
|
|
OMAP4, for example, has dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP.
|
|
Typically, the dual cortex-A9 is running Linux in a SMP configuration,
|
|
and each of the other three cores (two M3 cores and a DSP) is running
|
|
its own instance of RTOS in an AMP configuration.
|
|
|
|
Typically AMP remote processors employ dedicated DSP codecs and multimedia
|
|
hardware accelerators, and therefore are often used to offload CPU-intensive
|
|
multimedia tasks from the main application processor.
|
|
|
|
These remote processors could also be used to control latency-sensitive
|
|
sensors, drive random hardware blocks, or just perform background tasks
|
|
while the main CPU is idling.
|
|
|
|
Users of those remote processors can either be userland apps (e.g. multimedia
|
|
frameworks talking with remote OMX components) or kernel drivers (controlling
|
|
hardware accessible only by the remote processor, reserving kernel-controlled
|
|
resources on behalf of the remote processor, etc..).
|
|
|
|
Rpmsg is a virtio-based messaging bus that allows kernel drivers to communicate
|
|
with remote processors available on the system. In turn, drivers could then
|
|
expose appropriate user space interfaces, if needed.
|
|
|
|
When writing a driver that exposes rpmsg communication to userland, please
|
|
keep in mind that remote processors might have direct access to the
|
|
system's physical memory and other sensitive hardware resources (e.g. on
|
|
OMAP4, remote cores and hardware accelerators may have direct access to the
|
|
physical memory, gpio banks, dma controllers, i2c bus, gptimers, mailbox
|
|
devices, hwspinlocks, etc..). Moreover, those remote processors might be
|
|
running RTOS where every task can access the entire memory/devices exposed
|
|
to the processor. To minimize the risks of rogue (or buggy) userland code
|
|
exploiting remote bugs, and by that taking over the system, it is often
|
|
desired to limit userland to specific rpmsg channels (see definition below)
|
|
it can send messages on, and if possible, minimize how much control
|
|
it has over the content of the messages.
|
|
|
|
Every rpmsg device is a communication channel with a remote processor (thus
|
|
rpmsg devices are called channels). Channels are identified by a textual name
|
|
and have a local ("source") rpmsg address, and remote ("destination") rpmsg
|
|
address.
|
|
|
|
When a driver starts listening on a channel, its rx callback is bound with
|
|
a unique rpmsg local address (a 32-bit integer). This way when inbound messages
|
|
arrive, the rpmsg core dispatches them to the appropriate driver according
|
|
to their destination address (this is done by invoking the driver's rx handler
|
|
with the payload of the inbound message).
|
|
|
|
|
|
2. User API
|
|
|
|
int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len);
|
|
- sends a message across to the remote processor on a given channel.
|
|
The caller should specify the channel, the data it wants to send,
|
|
and its length (in bytes). The message will be sent on the specified
|
|
channel, i.e. its source and destination address fields will be
|
|
set to the channel's src and dst addresses.
|
|
|
|
In case there are no TX buffers available, the function will block until
|
|
one becomes available (i.e. until the remote processor consumes
|
|
a tx buffer and puts it back on virtio's used descriptor ring),
|
|
or a timeout of 15 seconds elapses. When the latter happens,
|
|
-ERESTARTSYS is returned.
|
|
The function can only be called from a process context (for now).
|
|
Returns 0 on success and an appropriate error value on failure.
|
|
|
|
int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst);
|
|
- sends a message across to the remote processor on a given channel,
|
|
to a destination address provided by the caller.
|
|
The caller should specify the channel, the data it wants to send,
|
|
its length (in bytes), and an explicit destination address.
|
|
The message will then be sent to the remote processor to which the
|
|
channel belongs, using the channel's src address, and the user-provided
|
|
dst address (thus the channel's dst address will be ignored).
|
|
|
|
In case there are no TX buffers available, the function will block until
|
|
one becomes available (i.e. until the remote processor consumes
|
|
a tx buffer and puts it back on virtio's used descriptor ring),
|
|
or a timeout of 15 seconds elapses. When the latter happens,
|
|
-ERESTARTSYS is returned.
|
|
The function can only be called from a process context (for now).
|
|
Returns 0 on success and an appropriate error value on failure.
|
|
|
|
int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
|
|
void *data, int len);
|
|
- sends a message across to the remote processor, using the src and dst
|
|
addresses provided by the user.
|
|
The caller should specify the channel, the data it wants to send,
|
|
its length (in bytes), and explicit source and destination addresses.
|
|
The message will then be sent to the remote processor to which the
|
|
channel belongs, but the channel's src and dst addresses will be
|
|
ignored (and the user-provided addresses will be used instead).
|
|
|
|
In case there are no TX buffers available, the function will block until
|
|
one becomes available (i.e. until the remote processor consumes
|
|
a tx buffer and puts it back on virtio's used descriptor ring),
|
|
or a timeout of 15 seconds elapses. When the latter happens,
|
|
-ERESTARTSYS is returned.
|
|
The function can only be called from a process context (for now).
|
|
Returns 0 on success and an appropriate error value on failure.
|
|
|
|
int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len);
|
|
- sends a message across to the remote processor on a given channel.
|
|
The caller should specify the channel, the data it wants to send,
|
|
and its length (in bytes). The message will be sent on the specified
|
|
channel, i.e. its source and destination address fields will be
|
|
set to the channel's src and dst addresses.
|
|
|
|
In case there are no TX buffers available, the function will immediately
|
|
return -ENOMEM without waiting until one becomes available.
|
|
The function can only be called from a process context (for now).
|
|
Returns 0 on success and an appropriate error value on failure.
|
|
|
|
int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
|
|
- sends a message across to the remote processor on a given channel,
|
|
to a destination address provided by the user.
|
|
The user should specify the channel, the data it wants to send,
|
|
its length (in bytes), and an explicit destination address.
|
|
The message will then be sent to the remote processor to which the
|
|
channel belongs, using the channel's src address, and the user-provided
|
|
dst address (thus the channel's dst address will be ignored).
|
|
|
|
In case there are no TX buffers available, the function will immediately
|
|
return -ENOMEM without waiting until one becomes available.
|
|
The function can only be called from a process context (for now).
|
|
Returns 0 on success and an appropriate error value on failure.
|
|
|
|
int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
|
|
void *data, int len);
|
|
- sends a message across to the remote processor, using source and
|
|
destination addresses provided by the user.
|
|
The user should specify the channel, the data it wants to send,
|
|
its length (in bytes), and explicit source and destination addresses.
|
|
The message will then be sent to the remote processor to which the
|
|
channel belongs, but the channel's src and dst addresses will be
|
|
ignored (and the user-provided addresses will be used instead).
|
|
|
|
In case there are no TX buffers available, the function will immediately
|
|
return -ENOMEM without waiting until one becomes available.
|
|
The function can only be called from a process context (for now).
|
|
Returns 0 on success and an appropriate error value on failure.
|
|
|
|
struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *rpdev,
|
|
void (*cb)(struct rpmsg_channel *, void *, int, void *, u32),
|
|
void *priv, u32 addr);
|
|
- every rpmsg address in the system is bound to an rx callback (so when
|
|
inbound messages arrive, they are dispatched by the rpmsg bus using the
|
|
appropriate callback handler) by means of an rpmsg_endpoint struct.
|
|
|
|
This function allows drivers to create such an endpoint, and by that,
|
|
bind a callback, and possibly some private data too, to an rpmsg address
|
|
(either one that is known in advance, or one that will be dynamically
|
|
assigned for them).
|
|
|
|
Simple rpmsg drivers need not call rpmsg_create_ept, because an endpoint
|
|
is already created for them when they are probed by the rpmsg bus
|
|
(using the rx callback they provide when they registered to the rpmsg bus).
|
|
|
|
So things should just work for simple drivers: they already have an
|
|
endpoint, their rx callback is bound to their rpmsg address, and when
|
|
relevant inbound messages arrive (i.e. messages which their dst address
|
|
equals to the src address of their rpmsg channel), the driver's handler
|
|
is invoked to process it.
|
|
|
|
That said, more complicated drivers might do need to allocate
|
|
additional rpmsg addresses, and bind them to different rx callbacks.
|
|
To accomplish that, those drivers need to call this function.
|
|
Drivers should provide their channel (so the new endpoint would bind
|
|
to the same remote processor their channel belongs to), an rx callback
|
|
function, an optional private data (which is provided back when the
|
|
rx callback is invoked), and an address they want to bind with the
|
|
callback. If addr is RPMSG_ADDR_ANY, then rpmsg_create_ept will
|
|
dynamically assign them an available rpmsg address (drivers should have
|
|
a very good reason why not to always use RPMSG_ADDR_ANY here).
|
|
|
|
Returns a pointer to the endpoint on success, or NULL on error.
|
|
|
|
void rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
|
|
- destroys an existing rpmsg endpoint. user should provide a pointer
|
|
to an rpmsg endpoint that was previously created with rpmsg_create_ept().
|
|
|
|
int register_rpmsg_driver(struct rpmsg_driver *rpdrv);
|
|
- registers an rpmsg driver with the rpmsg bus. user should provide
|
|
a pointer to an rpmsg_driver struct, which contains the driver's
|
|
->probe() and ->remove() functions, an rx callback, and an id_table
|
|
specifying the names of the channels this driver is interested to
|
|
be probed with.
|
|
|
|
void unregister_rpmsg_driver(struct rpmsg_driver *rpdrv);
|
|
- unregisters an rpmsg driver from the rpmsg bus. user should provide
|
|
a pointer to a previously-registered rpmsg_driver struct.
|
|
Returns 0 on success, and an appropriate error value on failure.
|
|
|
|
|
|
3. Typical usage
|
|
|
|
The following is a simple rpmsg driver, that sends an "hello!" message
|
|
on probe(), and whenever it receives an incoming message, it dumps its
|
|
content to the console.
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/rpmsg.h>
|
|
|
|
static void rpmsg_sample_cb(struct rpmsg_channel *rpdev, void *data, int len,
|
|
void *priv, u32 src)
|
|
{
|
|
print_hex_dump(KERN_INFO, "incoming message:", DUMP_PREFIX_NONE,
|
|
16, 1, data, len, true);
|
|
}
|
|
|
|
static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
|
|
{
|
|
int err;
|
|
|
|
dev_info(&rpdev->dev, "chnl: 0x%x -> 0x%x\n", rpdev->src, rpdev->dst);
|
|
|
|
/* send a message on our channel */
|
|
err = rpmsg_send(rpdev, "hello!", 6);
|
|
if (err) {
|
|
pr_err("rpmsg_send failed: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
|
|
{
|
|
dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
|
|
}
|
|
|
|
static struct rpmsg_device_id rpmsg_driver_sample_id_table[] = {
|
|
{ .name = "rpmsg-client-sample" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_sample_id_table);
|
|
|
|
static struct rpmsg_driver rpmsg_sample_client = {
|
|
.drv.name = KBUILD_MODNAME,
|
|
.id_table = rpmsg_driver_sample_id_table,
|
|
.probe = rpmsg_sample_probe,
|
|
.callback = rpmsg_sample_cb,
|
|
.remove = rpmsg_sample_remove,
|
|
};
|
|
module_rpmsg_driver(rpmsg_sample_client);
|
|
|
|
Note: a similar sample which can be built and loaded can be found
|
|
in samples/rpmsg/.
|
|
|
|
4. Allocations of rpmsg channels:
|
|
|
|
At this point we only support dynamic allocations of rpmsg channels.
|
|
|
|
This is possible only with remote processors that have the VIRTIO_RPMSG_F_NS
|
|
virtio device feature set. This feature bit means that the remote
|
|
processor supports dynamic name service announcement messages.
|
|
|
|
When this feature is enabled, creation of rpmsg devices (i.e. channels)
|
|
is completely dynamic: the remote processor announces the existence of a
|
|
remote rpmsg service by sending a name service message (which contains
|
|
the name and rpmsg addr of the remote service, see struct rpmsg_ns_msg).
|
|
|
|
This message is then handled by the rpmsg bus, which in turn dynamically
|
|
creates and registers an rpmsg channel (which represents the remote service).
|
|
If/when a relevant rpmsg driver is registered, it will be immediately probed
|
|
by the bus, and can then start sending messages to the remote service.
|
|
|
|
The plan is also to add static creation of rpmsg channels via the virtio
|
|
config space, but it's not implemented yet.
|