mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
abafbc551f
Accessing the disabled memory space of a PCI device would typically result in a master abort response on conventional PCI, or an unsupported request on PCI express. The user would generally see these as a -1 response for the read return data and the write would be silently discarded, possibly with an uncorrected, non-fatal AER error triggered on the host. Some systems however take it upon themselves to bring down the entire system when they see something that might indicate a loss of data, such as this discarded write to a disabled memory space. To avoid this, we want to try to block the user from accessing memory spaces while they're disabled. We start with a semaphore around the memory enable bit, where writers modify the memory enable state and must be serialized, while readers make use of the memory region and can access in parallel. Writers include both direct manipulation via the command register, as well as any reset path where the internal mechanics of the reset may both explicitly and implicitly disable memory access, and manipulation of the MSI-X configuration, where the MSI-X vector table resides in MMIO space of the device. Readers include the read and write file ops to access the vfio device fd offsets as well as memory mapped access. In the latter case, we make use of our new vma list support to zap, or invalidate, those memory mappings in order to force them to be faulted back in on access. Our semaphore usage will stall user access to MMIO spaces across internal operations like reset, but the user might experience new behavior when trying to access the MMIO space while disabled via the PCI command register. Access via read or write while disabled will return -EIO and access via memory maps will result in a SIGBUS. This is expected to be compatible with known use cases and potentially provides better error handling capabilities than present in the hardware, while avoiding the more readily accessible and severe platform error responses that might otherwise occur. Fixes: CVE-2020-12888 Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
692 lines
16 KiB
C
692 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* VFIO PCI interrupt handling
|
|
*
|
|
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
|
|
* Author: Alex Williamson <alex.williamson@redhat.com>
|
|
*
|
|
* Derived from original vfio:
|
|
* Copyright 2010 Cisco Systems, Inc. All rights reserved.
|
|
* Author: Tom Lyon, pugs@cisco.com
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/eventfd.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/file.h>
|
|
#include <linux/vfio.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "vfio_pci_private.h"
|
|
|
|
/*
|
|
* INTx
|
|
*/
|
|
static void vfio_send_intx_eventfd(void *opaque, void *unused)
|
|
{
|
|
struct vfio_pci_device *vdev = opaque;
|
|
|
|
if (likely(is_intx(vdev) && !vdev->virq_disabled))
|
|
eventfd_signal(vdev->ctx[0].trigger, 1);
|
|
}
|
|
|
|
void vfio_pci_intx_mask(struct vfio_pci_device *vdev)
|
|
{
|
|
struct pci_dev *pdev = vdev->pdev;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&vdev->irqlock, flags);
|
|
|
|
/*
|
|
* Masking can come from interrupt, ioctl, or config space
|
|
* via INTx disable. The latter means this can get called
|
|
* even when not using intx delivery. In this case, just
|
|
* try to have the physical bit follow the virtual bit.
|
|
*/
|
|
if (unlikely(!is_intx(vdev))) {
|
|
if (vdev->pci_2_3)
|
|
pci_intx(pdev, 0);
|
|
} else if (!vdev->ctx[0].masked) {
|
|
/*
|
|
* Can't use check_and_mask here because we always want to
|
|
* mask, not just when something is pending.
|
|
*/
|
|
if (vdev->pci_2_3)
|
|
pci_intx(pdev, 0);
|
|
else
|
|
disable_irq_nosync(pdev->irq);
|
|
|
|
vdev->ctx[0].masked = true;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vdev->irqlock, flags);
|
|
}
|
|
|
|
/*
|
|
* If this is triggered by an eventfd, we can't call eventfd_signal
|
|
* or else we'll deadlock on the eventfd wait queue. Return >0 when
|
|
* a signal is necessary, which can then be handled via a work queue
|
|
* or directly depending on the caller.
|
|
*/
|
|
static int vfio_pci_intx_unmask_handler(void *opaque, void *unused)
|
|
{
|
|
struct vfio_pci_device *vdev = opaque;
|
|
struct pci_dev *pdev = vdev->pdev;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
spin_lock_irqsave(&vdev->irqlock, flags);
|
|
|
|
/*
|
|
* Unmasking comes from ioctl or config, so again, have the
|
|
* physical bit follow the virtual even when not using INTx.
|
|
*/
|
|
if (unlikely(!is_intx(vdev))) {
|
|
if (vdev->pci_2_3)
|
|
pci_intx(pdev, 1);
|
|
} else if (vdev->ctx[0].masked && !vdev->virq_disabled) {
|
|
/*
|
|
* A pending interrupt here would immediately trigger,
|
|
* but we can avoid that overhead by just re-sending
|
|
* the interrupt to the user.
|
|
*/
|
|
if (vdev->pci_2_3) {
|
|
if (!pci_check_and_unmask_intx(pdev))
|
|
ret = 1;
|
|
} else
|
|
enable_irq(pdev->irq);
|
|
|
|
vdev->ctx[0].masked = (ret > 0);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vdev->irqlock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void vfio_pci_intx_unmask(struct vfio_pci_device *vdev)
|
|
{
|
|
if (vfio_pci_intx_unmask_handler(vdev, NULL) > 0)
|
|
vfio_send_intx_eventfd(vdev, NULL);
|
|
}
|
|
|
|
static irqreturn_t vfio_intx_handler(int irq, void *dev_id)
|
|
{
|
|
struct vfio_pci_device *vdev = dev_id;
|
|
unsigned long flags;
|
|
int ret = IRQ_NONE;
|
|
|
|
spin_lock_irqsave(&vdev->irqlock, flags);
|
|
|
|
if (!vdev->pci_2_3) {
|
|
disable_irq_nosync(vdev->pdev->irq);
|
|
vdev->ctx[0].masked = true;
|
|
ret = IRQ_HANDLED;
|
|
} else if (!vdev->ctx[0].masked && /* may be shared */
|
|
pci_check_and_mask_intx(vdev->pdev)) {
|
|
vdev->ctx[0].masked = true;
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&vdev->irqlock, flags);
|
|
|
|
if (ret == IRQ_HANDLED)
|
|
vfio_send_intx_eventfd(vdev, NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vfio_intx_enable(struct vfio_pci_device *vdev)
|
|
{
|
|
if (!is_irq_none(vdev))
|
|
return -EINVAL;
|
|
|
|
if (!vdev->pdev->irq)
|
|
return -ENODEV;
|
|
|
|
vdev->ctx = kzalloc(sizeof(struct vfio_pci_irq_ctx), GFP_KERNEL);
|
|
if (!vdev->ctx)
|
|
return -ENOMEM;
|
|
|
|
vdev->num_ctx = 1;
|
|
|
|
/*
|
|
* If the virtual interrupt is masked, restore it. Devices
|
|
* supporting DisINTx can be masked at the hardware level
|
|
* here, non-PCI-2.3 devices will have to wait until the
|
|
* interrupt is enabled.
|
|
*/
|
|
vdev->ctx[0].masked = vdev->virq_disabled;
|
|
if (vdev->pci_2_3)
|
|
pci_intx(vdev->pdev, !vdev->ctx[0].masked);
|
|
|
|
vdev->irq_type = VFIO_PCI_INTX_IRQ_INDEX;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vfio_intx_set_signal(struct vfio_pci_device *vdev, int fd)
|
|
{
|
|
struct pci_dev *pdev = vdev->pdev;
|
|
unsigned long irqflags = IRQF_SHARED;
|
|
struct eventfd_ctx *trigger;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (vdev->ctx[0].trigger) {
|
|
free_irq(pdev->irq, vdev);
|
|
kfree(vdev->ctx[0].name);
|
|
eventfd_ctx_put(vdev->ctx[0].trigger);
|
|
vdev->ctx[0].trigger = NULL;
|
|
}
|
|
|
|
if (fd < 0) /* Disable only */
|
|
return 0;
|
|
|
|
vdev->ctx[0].name = kasprintf(GFP_KERNEL, "vfio-intx(%s)",
|
|
pci_name(pdev));
|
|
if (!vdev->ctx[0].name)
|
|
return -ENOMEM;
|
|
|
|
trigger = eventfd_ctx_fdget(fd);
|
|
if (IS_ERR(trigger)) {
|
|
kfree(vdev->ctx[0].name);
|
|
return PTR_ERR(trigger);
|
|
}
|
|
|
|
vdev->ctx[0].trigger = trigger;
|
|
|
|
if (!vdev->pci_2_3)
|
|
irqflags = 0;
|
|
|
|
ret = request_irq(pdev->irq, vfio_intx_handler,
|
|
irqflags, vdev->ctx[0].name, vdev);
|
|
if (ret) {
|
|
vdev->ctx[0].trigger = NULL;
|
|
kfree(vdev->ctx[0].name);
|
|
eventfd_ctx_put(trigger);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* INTx disable will stick across the new irq setup,
|
|
* disable_irq won't.
|
|
*/
|
|
spin_lock_irqsave(&vdev->irqlock, flags);
|
|
if (!vdev->pci_2_3 && vdev->ctx[0].masked)
|
|
disable_irq_nosync(pdev->irq);
|
|
spin_unlock_irqrestore(&vdev->irqlock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vfio_intx_disable(struct vfio_pci_device *vdev)
|
|
{
|
|
vfio_virqfd_disable(&vdev->ctx[0].unmask);
|
|
vfio_virqfd_disable(&vdev->ctx[0].mask);
|
|
vfio_intx_set_signal(vdev, -1);
|
|
vdev->irq_type = VFIO_PCI_NUM_IRQS;
|
|
vdev->num_ctx = 0;
|
|
kfree(vdev->ctx);
|
|
}
|
|
|
|
/*
|
|
* MSI/MSI-X
|
|
*/
|
|
static irqreturn_t vfio_msihandler(int irq, void *arg)
|
|
{
|
|
struct eventfd_ctx *trigger = arg;
|
|
|
|
eventfd_signal(trigger, 1);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int vfio_msi_enable(struct vfio_pci_device *vdev, int nvec, bool msix)
|
|
{
|
|
struct pci_dev *pdev = vdev->pdev;
|
|
unsigned int flag = msix ? PCI_IRQ_MSIX : PCI_IRQ_MSI;
|
|
int ret;
|
|
u16 cmd;
|
|
|
|
if (!is_irq_none(vdev))
|
|
return -EINVAL;
|
|
|
|
vdev->ctx = kcalloc(nvec, sizeof(struct vfio_pci_irq_ctx), GFP_KERNEL);
|
|
if (!vdev->ctx)
|
|
return -ENOMEM;
|
|
|
|
/* return the number of supported vectors if we can't get all: */
|
|
cmd = vfio_pci_memory_lock_and_enable(vdev);
|
|
ret = pci_alloc_irq_vectors(pdev, 1, nvec, flag);
|
|
if (ret < nvec) {
|
|
if (ret > 0)
|
|
pci_free_irq_vectors(pdev);
|
|
vfio_pci_memory_unlock_and_restore(vdev, cmd);
|
|
kfree(vdev->ctx);
|
|
return ret;
|
|
}
|
|
vfio_pci_memory_unlock_and_restore(vdev, cmd);
|
|
|
|
vdev->num_ctx = nvec;
|
|
vdev->irq_type = msix ? VFIO_PCI_MSIX_IRQ_INDEX :
|
|
VFIO_PCI_MSI_IRQ_INDEX;
|
|
|
|
if (!msix) {
|
|
/*
|
|
* Compute the virtual hardware field for max msi vectors -
|
|
* it is the log base 2 of the number of vectors.
|
|
*/
|
|
vdev->msi_qmax = fls(nvec * 2 - 1) - 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
|
|
int vector, int fd, bool msix)
|
|
{
|
|
struct pci_dev *pdev = vdev->pdev;
|
|
struct eventfd_ctx *trigger;
|
|
int irq, ret;
|
|
u16 cmd;
|
|
|
|
if (vector < 0 || vector >= vdev->num_ctx)
|
|
return -EINVAL;
|
|
|
|
irq = pci_irq_vector(pdev, vector);
|
|
|
|
if (vdev->ctx[vector].trigger) {
|
|
irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
|
|
|
|
cmd = vfio_pci_memory_lock_and_enable(vdev);
|
|
free_irq(irq, vdev->ctx[vector].trigger);
|
|
vfio_pci_memory_unlock_and_restore(vdev, cmd);
|
|
|
|
kfree(vdev->ctx[vector].name);
|
|
eventfd_ctx_put(vdev->ctx[vector].trigger);
|
|
vdev->ctx[vector].trigger = NULL;
|
|
}
|
|
|
|
if (fd < 0)
|
|
return 0;
|
|
|
|
vdev->ctx[vector].name = kasprintf(GFP_KERNEL, "vfio-msi%s[%d](%s)",
|
|
msix ? "x" : "", vector,
|
|
pci_name(pdev));
|
|
if (!vdev->ctx[vector].name)
|
|
return -ENOMEM;
|
|
|
|
trigger = eventfd_ctx_fdget(fd);
|
|
if (IS_ERR(trigger)) {
|
|
kfree(vdev->ctx[vector].name);
|
|
return PTR_ERR(trigger);
|
|
}
|
|
|
|
/*
|
|
* The MSIx vector table resides in device memory which may be cleared
|
|
* via backdoor resets. We don't allow direct access to the vector
|
|
* table so even if a userspace driver attempts to save/restore around
|
|
* such a reset it would be unsuccessful. To avoid this, restore the
|
|
* cached value of the message prior to enabling.
|
|
*/
|
|
cmd = vfio_pci_memory_lock_and_enable(vdev);
|
|
if (msix) {
|
|
struct msi_msg msg;
|
|
|
|
get_cached_msi_msg(irq, &msg);
|
|
pci_write_msi_msg(irq, &msg);
|
|
}
|
|
|
|
ret = request_irq(irq, vfio_msihandler, 0,
|
|
vdev->ctx[vector].name, trigger);
|
|
vfio_pci_memory_unlock_and_restore(vdev, cmd);
|
|
if (ret) {
|
|
kfree(vdev->ctx[vector].name);
|
|
eventfd_ctx_put(trigger);
|
|
return ret;
|
|
}
|
|
|
|
vdev->ctx[vector].producer.token = trigger;
|
|
vdev->ctx[vector].producer.irq = irq;
|
|
ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
|
|
if (unlikely(ret))
|
|
dev_info(&pdev->dev,
|
|
"irq bypass producer (token %p) registration fails: %d\n",
|
|
vdev->ctx[vector].producer.token, ret);
|
|
|
|
vdev->ctx[vector].trigger = trigger;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
|
|
unsigned count, int32_t *fds, bool msix)
|
|
{
|
|
int i, j, ret = 0;
|
|
|
|
if (start >= vdev->num_ctx || start + count > vdev->num_ctx)
|
|
return -EINVAL;
|
|
|
|
for (i = 0, j = start; i < count && !ret; i++, j++) {
|
|
int fd = fds ? fds[i] : -1;
|
|
ret = vfio_msi_set_vector_signal(vdev, j, fd, msix);
|
|
}
|
|
|
|
if (ret) {
|
|
for (--j; j >= (int)start; j--)
|
|
vfio_msi_set_vector_signal(vdev, j, -1, msix);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void vfio_msi_disable(struct vfio_pci_device *vdev, bool msix)
|
|
{
|
|
struct pci_dev *pdev = vdev->pdev;
|
|
int i;
|
|
u16 cmd;
|
|
|
|
for (i = 0; i < vdev->num_ctx; i++) {
|
|
vfio_virqfd_disable(&vdev->ctx[i].unmask);
|
|
vfio_virqfd_disable(&vdev->ctx[i].mask);
|
|
}
|
|
|
|
vfio_msi_set_block(vdev, 0, vdev->num_ctx, NULL, msix);
|
|
|
|
cmd = vfio_pci_memory_lock_and_enable(vdev);
|
|
pci_free_irq_vectors(pdev);
|
|
vfio_pci_memory_unlock_and_restore(vdev, cmd);
|
|
|
|
/*
|
|
* Both disable paths above use pci_intx_for_msi() to clear DisINTx
|
|
* via their shutdown paths. Restore for NoINTx devices.
|
|
*/
|
|
if (vdev->nointx)
|
|
pci_intx(pdev, 0);
|
|
|
|
vdev->irq_type = VFIO_PCI_NUM_IRQS;
|
|
vdev->num_ctx = 0;
|
|
kfree(vdev->ctx);
|
|
}
|
|
|
|
/*
|
|
* IOCTL support
|
|
*/
|
|
static int vfio_pci_set_intx_unmask(struct vfio_pci_device *vdev,
|
|
unsigned index, unsigned start,
|
|
unsigned count, uint32_t flags, void *data)
|
|
{
|
|
if (!is_intx(vdev) || start != 0 || count != 1)
|
|
return -EINVAL;
|
|
|
|
if (flags & VFIO_IRQ_SET_DATA_NONE) {
|
|
vfio_pci_intx_unmask(vdev);
|
|
} else if (flags & VFIO_IRQ_SET_DATA_BOOL) {
|
|
uint8_t unmask = *(uint8_t *)data;
|
|
if (unmask)
|
|
vfio_pci_intx_unmask(vdev);
|
|
} else if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
|
|
int32_t fd = *(int32_t *)data;
|
|
if (fd >= 0)
|
|
return vfio_virqfd_enable((void *) vdev,
|
|
vfio_pci_intx_unmask_handler,
|
|
vfio_send_intx_eventfd, NULL,
|
|
&vdev->ctx[0].unmask, fd);
|
|
|
|
vfio_virqfd_disable(&vdev->ctx[0].unmask);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vfio_pci_set_intx_mask(struct vfio_pci_device *vdev,
|
|
unsigned index, unsigned start,
|
|
unsigned count, uint32_t flags, void *data)
|
|
{
|
|
if (!is_intx(vdev) || start != 0 || count != 1)
|
|
return -EINVAL;
|
|
|
|
if (flags & VFIO_IRQ_SET_DATA_NONE) {
|
|
vfio_pci_intx_mask(vdev);
|
|
} else if (flags & VFIO_IRQ_SET_DATA_BOOL) {
|
|
uint8_t mask = *(uint8_t *)data;
|
|
if (mask)
|
|
vfio_pci_intx_mask(vdev);
|
|
} else if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
|
|
return -ENOTTY; /* XXX implement me */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vfio_pci_set_intx_trigger(struct vfio_pci_device *vdev,
|
|
unsigned index, unsigned start,
|
|
unsigned count, uint32_t flags, void *data)
|
|
{
|
|
if (is_intx(vdev) && !count && (flags & VFIO_IRQ_SET_DATA_NONE)) {
|
|
vfio_intx_disable(vdev);
|
|
return 0;
|
|
}
|
|
|
|
if (!(is_intx(vdev) || is_irq_none(vdev)) || start != 0 || count != 1)
|
|
return -EINVAL;
|
|
|
|
if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
|
|
int32_t fd = *(int32_t *)data;
|
|
int ret;
|
|
|
|
if (is_intx(vdev))
|
|
return vfio_intx_set_signal(vdev, fd);
|
|
|
|
ret = vfio_intx_enable(vdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = vfio_intx_set_signal(vdev, fd);
|
|
if (ret)
|
|
vfio_intx_disable(vdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
if (!is_intx(vdev))
|
|
return -EINVAL;
|
|
|
|
if (flags & VFIO_IRQ_SET_DATA_NONE) {
|
|
vfio_send_intx_eventfd(vdev, NULL);
|
|
} else if (flags & VFIO_IRQ_SET_DATA_BOOL) {
|
|
uint8_t trigger = *(uint8_t *)data;
|
|
if (trigger)
|
|
vfio_send_intx_eventfd(vdev, NULL);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int vfio_pci_set_msi_trigger(struct vfio_pci_device *vdev,
|
|
unsigned index, unsigned start,
|
|
unsigned count, uint32_t flags, void *data)
|
|
{
|
|
int i;
|
|
bool msix = (index == VFIO_PCI_MSIX_IRQ_INDEX) ? true : false;
|
|
|
|
if (irq_is(vdev, index) && !count && (flags & VFIO_IRQ_SET_DATA_NONE)) {
|
|
vfio_msi_disable(vdev, msix);
|
|
return 0;
|
|
}
|
|
|
|
if (!(irq_is(vdev, index) || is_irq_none(vdev)))
|
|
return -EINVAL;
|
|
|
|
if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
|
|
int32_t *fds = data;
|
|
int ret;
|
|
|
|
if (vdev->irq_type == index)
|
|
return vfio_msi_set_block(vdev, start, count,
|
|
fds, msix);
|
|
|
|
ret = vfio_msi_enable(vdev, start + count, msix);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = vfio_msi_set_block(vdev, start, count, fds, msix);
|
|
if (ret)
|
|
vfio_msi_disable(vdev, msix);
|
|
|
|
return ret;
|
|
}
|
|
|
|
if (!irq_is(vdev, index) || start + count > vdev->num_ctx)
|
|
return -EINVAL;
|
|
|
|
for (i = start; i < start + count; i++) {
|
|
if (!vdev->ctx[i].trigger)
|
|
continue;
|
|
if (flags & VFIO_IRQ_SET_DATA_NONE) {
|
|
eventfd_signal(vdev->ctx[i].trigger, 1);
|
|
} else if (flags & VFIO_IRQ_SET_DATA_BOOL) {
|
|
uint8_t *bools = data;
|
|
if (bools[i - start])
|
|
eventfd_signal(vdev->ctx[i].trigger, 1);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int vfio_pci_set_ctx_trigger_single(struct eventfd_ctx **ctx,
|
|
unsigned int count, uint32_t flags,
|
|
void *data)
|
|
{
|
|
/* DATA_NONE/DATA_BOOL enables loopback testing */
|
|
if (flags & VFIO_IRQ_SET_DATA_NONE) {
|
|
if (*ctx) {
|
|
if (count) {
|
|
eventfd_signal(*ctx, 1);
|
|
} else {
|
|
eventfd_ctx_put(*ctx);
|
|
*ctx = NULL;
|
|
}
|
|
return 0;
|
|
}
|
|
} else if (flags & VFIO_IRQ_SET_DATA_BOOL) {
|
|
uint8_t trigger;
|
|
|
|
if (!count)
|
|
return -EINVAL;
|
|
|
|
trigger = *(uint8_t *)data;
|
|
if (trigger && *ctx)
|
|
eventfd_signal(*ctx, 1);
|
|
|
|
return 0;
|
|
} else if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
|
|
int32_t fd;
|
|
|
|
if (!count)
|
|
return -EINVAL;
|
|
|
|
fd = *(int32_t *)data;
|
|
if (fd == -1) {
|
|
if (*ctx)
|
|
eventfd_ctx_put(*ctx);
|
|
*ctx = NULL;
|
|
} else if (fd >= 0) {
|
|
struct eventfd_ctx *efdctx;
|
|
|
|
efdctx = eventfd_ctx_fdget(fd);
|
|
if (IS_ERR(efdctx))
|
|
return PTR_ERR(efdctx);
|
|
|
|
if (*ctx)
|
|
eventfd_ctx_put(*ctx);
|
|
|
|
*ctx = efdctx;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vfio_pci_set_err_trigger(struct vfio_pci_device *vdev,
|
|
unsigned index, unsigned start,
|
|
unsigned count, uint32_t flags, void *data)
|
|
{
|
|
if (index != VFIO_PCI_ERR_IRQ_INDEX || start != 0 || count > 1)
|
|
return -EINVAL;
|
|
|
|
return vfio_pci_set_ctx_trigger_single(&vdev->err_trigger,
|
|
count, flags, data);
|
|
}
|
|
|
|
static int vfio_pci_set_req_trigger(struct vfio_pci_device *vdev,
|
|
unsigned index, unsigned start,
|
|
unsigned count, uint32_t flags, void *data)
|
|
{
|
|
if (index != VFIO_PCI_REQ_IRQ_INDEX || start != 0 || count > 1)
|
|
return -EINVAL;
|
|
|
|
return vfio_pci_set_ctx_trigger_single(&vdev->req_trigger,
|
|
count, flags, data);
|
|
}
|
|
|
|
int vfio_pci_set_irqs_ioctl(struct vfio_pci_device *vdev, uint32_t flags,
|
|
unsigned index, unsigned start, unsigned count,
|
|
void *data)
|
|
{
|
|
int (*func)(struct vfio_pci_device *vdev, unsigned index,
|
|
unsigned start, unsigned count, uint32_t flags,
|
|
void *data) = NULL;
|
|
|
|
switch (index) {
|
|
case VFIO_PCI_INTX_IRQ_INDEX:
|
|
switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
|
|
case VFIO_IRQ_SET_ACTION_MASK:
|
|
func = vfio_pci_set_intx_mask;
|
|
break;
|
|
case VFIO_IRQ_SET_ACTION_UNMASK:
|
|
func = vfio_pci_set_intx_unmask;
|
|
break;
|
|
case VFIO_IRQ_SET_ACTION_TRIGGER:
|
|
func = vfio_pci_set_intx_trigger;
|
|
break;
|
|
}
|
|
break;
|
|
case VFIO_PCI_MSI_IRQ_INDEX:
|
|
case VFIO_PCI_MSIX_IRQ_INDEX:
|
|
switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
|
|
case VFIO_IRQ_SET_ACTION_MASK:
|
|
case VFIO_IRQ_SET_ACTION_UNMASK:
|
|
/* XXX Need masking support exported */
|
|
break;
|
|
case VFIO_IRQ_SET_ACTION_TRIGGER:
|
|
func = vfio_pci_set_msi_trigger;
|
|
break;
|
|
}
|
|
break;
|
|
case VFIO_PCI_ERR_IRQ_INDEX:
|
|
switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
|
|
case VFIO_IRQ_SET_ACTION_TRIGGER:
|
|
if (pci_is_pcie(vdev->pdev))
|
|
func = vfio_pci_set_err_trigger;
|
|
break;
|
|
}
|
|
break;
|
|
case VFIO_PCI_REQ_IRQ_INDEX:
|
|
switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
|
|
case VFIO_IRQ_SET_ACTION_TRIGGER:
|
|
func = vfio_pci_set_req_trigger;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (!func)
|
|
return -ENOTTY;
|
|
|
|
return func(vdev, index, start, count, flags, data);
|
|
}
|