mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
bcc5a6f5fc
Add "blue-and-red-wiring"-device tree property and update devicetree binding document. The red and blue components are reversed between 24 and 16 bit modes on am335x LCDC output pins. To get 24 RGB format the red and blue wires has to be crossed and this in turn causes 16 colors output to be in BGR format. With straight wiring the 16 color is RGB and 24 bit is BGR. The new property describes whether the red and blue wires are crossed or not. If the property is not present or its value is not recognized the legacy mode is assumed. The legacy configuration supports RGB565, RGB888 and XRGB8888 formats. However, depending on wiring, the red and blue colors are swapped in either 16 or 24-bit color modes. For more details see section 3.1.1 in AM335x Silicon Errata: http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360 Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> |
||
|---|---|---|
| .. | ||
| armada | ||
| atmel | ||
| bridge | ||
| connector | ||
| etnaviv | ||
| exynos | ||
| hisilicon | ||
| imx | ||
| mediatek | ||
| msm | ||
| panel | ||
| rockchip | ||
| sunxi | ||
| tegra | ||
| ti | ||
| tilcdc | ||
| arm,hdlcd.txt | ||
| arm,malidp.txt | ||
| arm,pl11x.txt | ||
| atmel,lcdc.txt | ||
| brcm,bcm-vc4.txt | ||
| cirrus,clps711x-fb.txt | ||
| fsl,dcu.txt | ||
| fsl,tcon.txt | ||
| marvell,pxa2xx-lcdc.txt | ||
| mipi-dsi-bus.txt | ||
| mxsfb.txt | ||
| renesas,du.txt | ||
| simple-framebuffer-sunxi.txt | ||
| simple-framebuffer.txt | ||
| sm501fb.txt | ||
| snps,arcpgu.txt | ||
| ssd1289fb.txt | ||
| ssd1307fb.txt | ||
| st,stih4xx.txt | ||
| via,vt8500-fb.txt | ||
| wm,prizm-ge-rops.txt | ||
| wm,wm8505-fb.txt | ||