mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 10:26:42 +07:00
673254d5b3
Add support to the Armadeus Systems APF6 Solo / Dual / Quad SoM and the Armadeus Systems APF6Dev carrier board. For more details see: http://www.armadeus.com/english/products-processor_boards-apf6.html http://www.armadeus.com/english/products-development_boards-apf6_dev.html Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
159 lines
5.0 KiB
Plaintext
159 lines
5.0 KiB
Plaintext
/*
|
|
* Copyright 2015 Armadeus Systems
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public
|
|
* License along with this file; if not, write to the Free
|
|
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rgmii";
|
|
phy-reset-duration = <10>;
|
|
phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Bluetooth */
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Wi-Fi */
|
|
&usdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
non-removable;
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
wlcore: wlcore@2 {
|
|
compatible = "ti,wl1271";
|
|
reg = <2>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
|
|
ref-clock-frequency = <38400000>;
|
|
tcxo-clock-frequency = <38400000>;
|
|
};
|
|
};
|
|
|
|
/* eMMC */
|
|
&usdhc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
bus-width = <8>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
apf6 {
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0
|
|
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0
|
|
MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0
|
|
MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0
|
|
MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
|
|
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
|
|
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
|
|
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
|
|
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
|
|
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
|
|
MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */
|
|
MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
|
|
>;
|
|
};
|
|
};
|
|
};
|