mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:06:48 +07:00
36156cdff1
Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/declance.c | 26 ++++++++++---------------- 1 files changed, 10 insertions(+), 16 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
1316 lines
32 KiB
C
1316 lines
32 KiB
C
/*
|
|
* Lance ethernet driver for the MIPS processor based
|
|
* DECstation family
|
|
*
|
|
*
|
|
* adopted from sunlance.c by Richard van den Berg
|
|
*
|
|
* Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
|
|
*
|
|
* additional sources:
|
|
* - PMAD-AA TURBOchannel Ethernet Module Functional Specification,
|
|
* Revision 1.2
|
|
*
|
|
* History:
|
|
*
|
|
* v0.001: The kernel accepts the code and it shows the hardware address.
|
|
*
|
|
* v0.002: Removed most sparc stuff, left only some module and dma stuff.
|
|
*
|
|
* v0.003: Enhanced base address calculation from proposals by
|
|
* Harald Koerfgen and Thomas Riemer.
|
|
*
|
|
* v0.004: lance-regs is pointing at the right addresses, added prom
|
|
* check. First start of address mapping and DMA.
|
|
*
|
|
* v0.005: started to play around with LANCE-DMA. This driver will not
|
|
* work for non IOASIC lances. HK
|
|
*
|
|
* v0.006: added pointer arrays to lance_private and setup routine for
|
|
* them in dec_lance_init. HK
|
|
*
|
|
* v0.007: Big shit. The LANCE seems to use a different DMA mechanism to
|
|
* access the init block. This looks like one (short) word at a
|
|
* time, but the smallest amount the IOASIC can transfer is a
|
|
* (long) word. So we have a 2-2 padding here. Changed
|
|
* lance_init_block accordingly. The 16-16 padding for the buffers
|
|
* seems to be correct. HK
|
|
*
|
|
* v0.008: mods to make PMAX_LANCE work. 01/09/1999 triemer
|
|
*
|
|
* v0.009: Module support fixes, multiple interfaces support, various
|
|
* bits. macro
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/string.h>
|
|
|
|
#include <asm/addrspace.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/dec/interrupts.h>
|
|
#include <asm/dec/ioasic.h>
|
|
#include <asm/dec/ioasic_addrs.h>
|
|
#include <asm/dec/kn01.h>
|
|
#include <asm/dec/machtype.h>
|
|
#include <asm/dec/system.h>
|
|
#include <asm/dec/tc.h>
|
|
|
|
static char version[] __devinitdata =
|
|
"declance.c: v0.009 by Linux MIPS DECstation task force\n";
|
|
|
|
MODULE_AUTHOR("Linux MIPS DECstation task force");
|
|
MODULE_DESCRIPTION("DEC LANCE (DECstation onboard, PMAD-xx) driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
* card types
|
|
*/
|
|
#define ASIC_LANCE 1
|
|
#define PMAD_LANCE 2
|
|
#define PMAX_LANCE 3
|
|
|
|
|
|
#define LE_CSR0 0
|
|
#define LE_CSR1 1
|
|
#define LE_CSR2 2
|
|
#define LE_CSR3 3
|
|
|
|
#define LE_MO_PROM 0x8000 /* Enable promiscuous mode */
|
|
|
|
#define LE_C0_ERR 0x8000 /* Error: set if BAB, SQE, MISS or ME is set */
|
|
#define LE_C0_BABL 0x4000 /* BAB: Babble: tx timeout. */
|
|
#define LE_C0_CERR 0x2000 /* SQE: Signal quality error */
|
|
#define LE_C0_MISS 0x1000 /* MISS: Missed a packet */
|
|
#define LE_C0_MERR 0x0800 /* ME: Memory error */
|
|
#define LE_C0_RINT 0x0400 /* Received interrupt */
|
|
#define LE_C0_TINT 0x0200 /* Transmitter Interrupt */
|
|
#define LE_C0_IDON 0x0100 /* IFIN: Init finished. */
|
|
#define LE_C0_INTR 0x0080 /* Interrupt or error */
|
|
#define LE_C0_INEA 0x0040 /* Interrupt enable */
|
|
#define LE_C0_RXON 0x0020 /* Receiver on */
|
|
#define LE_C0_TXON 0x0010 /* Transmitter on */
|
|
#define LE_C0_TDMD 0x0008 /* Transmitter demand */
|
|
#define LE_C0_STOP 0x0004 /* Stop the card */
|
|
#define LE_C0_STRT 0x0002 /* Start the card */
|
|
#define LE_C0_INIT 0x0001 /* Init the card */
|
|
|
|
#define LE_C3_BSWP 0x4 /* SWAP */
|
|
#define LE_C3_ACON 0x2 /* ALE Control */
|
|
#define LE_C3_BCON 0x1 /* Byte control */
|
|
|
|
/* Receive message descriptor 1 */
|
|
#define LE_R1_OWN 0x80 /* Who owns the entry */
|
|
#define LE_R1_ERR 0x40 /* Error: if FRA, OFL, CRC or BUF is set */
|
|
#define LE_R1_FRA 0x20 /* FRA: Frame error */
|
|
#define LE_R1_OFL 0x10 /* OFL: Frame overflow */
|
|
#define LE_R1_CRC 0x08 /* CRC error */
|
|
#define LE_R1_BUF 0x04 /* BUF: Buffer error */
|
|
#define LE_R1_SOP 0x02 /* Start of packet */
|
|
#define LE_R1_EOP 0x01 /* End of packet */
|
|
#define LE_R1_POK 0x03 /* Packet is complete: SOP + EOP */
|
|
|
|
#define LE_T1_OWN 0x80 /* Lance owns the packet */
|
|
#define LE_T1_ERR 0x40 /* Error summary */
|
|
#define LE_T1_EMORE 0x10 /* Error: more than one retry needed */
|
|
#define LE_T1_EONE 0x08 /* Error: one retry needed */
|
|
#define LE_T1_EDEF 0x04 /* Error: deferred */
|
|
#define LE_T1_SOP 0x02 /* Start of packet */
|
|
#define LE_T1_EOP 0x01 /* End of packet */
|
|
#define LE_T1_POK 0x03 /* Packet is complete: SOP + EOP */
|
|
|
|
#define LE_T3_BUF 0x8000 /* Buffer error */
|
|
#define LE_T3_UFL 0x4000 /* Error underflow */
|
|
#define LE_T3_LCOL 0x1000 /* Error late collision */
|
|
#define LE_T3_CLOS 0x0800 /* Error carrier loss */
|
|
#define LE_T3_RTY 0x0400 /* Error retry */
|
|
#define LE_T3_TDR 0x03ff /* Time Domain Reflectometry counter */
|
|
|
|
/* Define: 2^4 Tx buffers and 2^4 Rx buffers */
|
|
|
|
#ifndef LANCE_LOG_TX_BUFFERS
|
|
#define LANCE_LOG_TX_BUFFERS 4
|
|
#define LANCE_LOG_RX_BUFFERS 4
|
|
#endif
|
|
|
|
#define TX_RING_SIZE (1 << (LANCE_LOG_TX_BUFFERS))
|
|
#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
|
|
|
|
#define RX_RING_SIZE (1 << (LANCE_LOG_RX_BUFFERS))
|
|
#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
|
|
|
|
#define PKT_BUF_SZ 1536
|
|
#define RX_BUFF_SIZE PKT_BUF_SZ
|
|
#define TX_BUFF_SIZE PKT_BUF_SZ
|
|
|
|
#undef TEST_HITS
|
|
#define ZERO 0
|
|
|
|
/* The DS2000/3000 have a linear 64 KB buffer.
|
|
|
|
* The PMAD-AA has 128 kb buffer on-board.
|
|
*
|
|
* The IOASIC LANCE devices use a shared memory region. This region as seen
|
|
* from the CPU is (max) 128 KB long and has to be on an 128 KB boundary.
|
|
* The LANCE sees this as a 64 KB long continuous memory region.
|
|
*
|
|
* The LANCE's DMA address is used as an index in this buffer and DMA takes
|
|
* place in bursts of eight 16-Bit words which are packed into four 32-Bit words
|
|
* by the IOASIC. This leads to a strange padding: 16 bytes of valid data followed
|
|
* by a 16 byte gap :-(.
|
|
*/
|
|
|
|
struct lance_rx_desc {
|
|
unsigned short rmd0; /* low address of packet */
|
|
short gap0;
|
|
unsigned char rmd1_hadr; /* high address of packet */
|
|
unsigned char rmd1_bits; /* descriptor bits */
|
|
short gap1;
|
|
short length; /* 2s complement (negative!)
|
|
of buffer length */
|
|
short gap2;
|
|
unsigned short mblength; /* actual number of bytes received */
|
|
short gap3;
|
|
};
|
|
|
|
struct lance_tx_desc {
|
|
unsigned short tmd0; /* low address of packet */
|
|
short gap0;
|
|
unsigned char tmd1_hadr; /* high address of packet */
|
|
unsigned char tmd1_bits; /* descriptor bits */
|
|
short gap1;
|
|
short length; /* 2s complement (negative!)
|
|
of buffer length */
|
|
short gap2;
|
|
unsigned short misc;
|
|
short gap3;
|
|
};
|
|
|
|
|
|
/* First part of the LANCE initialization block, described in databook. */
|
|
struct lance_init_block {
|
|
unsigned short mode; /* pre-set mode (reg. 15) */
|
|
short gap0;
|
|
|
|
unsigned char phys_addr[12]; /* physical ethernet address
|
|
only 0, 1, 4, 5, 8, 9 are valid
|
|
2, 3, 6, 7, 10, 11 are gaps */
|
|
unsigned short filter[8]; /* multicast filter
|
|
only 0, 2, 4, 6 are valid
|
|
1, 3, 5, 7 are gaps */
|
|
|
|
/* Receive and transmit ring base, along with extra bits. */
|
|
unsigned short rx_ptr; /* receive descriptor addr */
|
|
short gap1;
|
|
unsigned short rx_len; /* receive len and high addr */
|
|
short gap2;
|
|
unsigned short tx_ptr; /* transmit descriptor addr */
|
|
short gap3;
|
|
unsigned short tx_len; /* transmit len and high addr */
|
|
short gap4;
|
|
short gap5[8];
|
|
|
|
/* The buffer descriptors */
|
|
struct lance_rx_desc brx_ring[RX_RING_SIZE];
|
|
struct lance_tx_desc btx_ring[TX_RING_SIZE];
|
|
};
|
|
|
|
#define BUF_OFFSET_CPU sizeof(struct lance_init_block)
|
|
#define BUF_OFFSET_LNC (sizeof(struct lance_init_block)>>1)
|
|
|
|
#define libdesc_offset(rt, elem) \
|
|
((__u32)(((unsigned long)(&(((struct lance_init_block *)0)->rt[elem])))))
|
|
|
|
/*
|
|
* This works *only* for the ring descriptors
|
|
*/
|
|
#define LANCE_ADDR(x) (CPHYSADDR(x) >> 1)
|
|
|
|
struct lance_private {
|
|
struct net_device *next;
|
|
int type;
|
|
int slot;
|
|
int dma_irq;
|
|
volatile struct lance_regs *ll;
|
|
volatile struct lance_init_block *init_block;
|
|
|
|
spinlock_t lock;
|
|
|
|
int rx_new, tx_new;
|
|
int rx_old, tx_old;
|
|
|
|
struct net_device_stats stats;
|
|
|
|
unsigned short busmaster_regval;
|
|
|
|
struct timer_list multicast_timer;
|
|
|
|
/* Pointers to the ring buffers as seen from the CPU */
|
|
char *rx_buf_ptr_cpu[RX_RING_SIZE];
|
|
char *tx_buf_ptr_cpu[TX_RING_SIZE];
|
|
|
|
/* Pointers to the ring buffers as seen from the LANCE */
|
|
char *rx_buf_ptr_lnc[RX_RING_SIZE];
|
|
char *tx_buf_ptr_lnc[TX_RING_SIZE];
|
|
};
|
|
|
|
#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
|
|
lp->tx_old+TX_RING_MOD_MASK-lp->tx_new:\
|
|
lp->tx_old - lp->tx_new-1)
|
|
|
|
/* The lance control ports are at an absolute address, machine and tc-slot
|
|
* dependent.
|
|
* DECstations do only 32-bit access and the LANCE uses 16 bit addresses,
|
|
* so we have to give the structure an extra member making rap pointing
|
|
* at the right address
|
|
*/
|
|
struct lance_regs {
|
|
volatile unsigned short rdp; /* register data port */
|
|
unsigned short pad;
|
|
volatile unsigned short rap; /* register address port */
|
|
};
|
|
|
|
int dec_lance_debug = 2;
|
|
|
|
static struct net_device *root_lance_dev;
|
|
|
|
static inline void writereg(volatile unsigned short *regptr, short value)
|
|
{
|
|
*regptr = value;
|
|
iob();
|
|
}
|
|
|
|
/* Load the CSR registers */
|
|
static void load_csrs(struct lance_private *lp)
|
|
{
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
int leptr;
|
|
|
|
/* The address space as seen from the LANCE
|
|
* begins at address 0. HK
|
|
*/
|
|
leptr = 0;
|
|
|
|
writereg(&ll->rap, LE_CSR1);
|
|
writereg(&ll->rdp, (leptr & 0xFFFF));
|
|
writereg(&ll->rap, LE_CSR2);
|
|
writereg(&ll->rdp, leptr >> 16);
|
|
writereg(&ll->rap, LE_CSR3);
|
|
writereg(&ll->rdp, lp->busmaster_regval);
|
|
|
|
/* Point back to csr0 */
|
|
writereg(&ll->rap, LE_CSR0);
|
|
}
|
|
|
|
/*
|
|
* Our specialized copy routines
|
|
*
|
|
*/
|
|
void cp_to_buf(const int type, void *to, const void *from, int len)
|
|
{
|
|
unsigned short *tp, *fp, clen;
|
|
unsigned char *rtp, *rfp;
|
|
|
|
if (type == PMAX_LANCE) {
|
|
clen = len >> 1;
|
|
tp = (unsigned short *) to;
|
|
fp = (unsigned short *) from;
|
|
|
|
while (clen--) {
|
|
*tp++ = *fp++;
|
|
tp++;
|
|
}
|
|
|
|
clen = len & 1;
|
|
rtp = (unsigned char *) tp;
|
|
rfp = (unsigned char *) fp;
|
|
while (clen--) {
|
|
*rtp++ = *rfp++;
|
|
}
|
|
} else {
|
|
/*
|
|
* copy 16 Byte chunks
|
|
*/
|
|
clen = len >> 4;
|
|
tp = (unsigned short *) to;
|
|
fp = (unsigned short *) from;
|
|
while (clen--) {
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
tp += 8;
|
|
}
|
|
|
|
/*
|
|
* do the rest, if any.
|
|
*/
|
|
clen = len & 15;
|
|
rtp = (unsigned char *) tp;
|
|
rfp = (unsigned char *) fp;
|
|
while (clen--) {
|
|
*rtp++ = *rfp++;
|
|
}
|
|
}
|
|
|
|
iob();
|
|
}
|
|
|
|
void cp_from_buf(const int type, void *to, const void *from, int len)
|
|
{
|
|
unsigned short *tp, *fp, clen;
|
|
unsigned char *rtp, *rfp;
|
|
|
|
if (type == PMAX_LANCE) {
|
|
clen = len >> 1;
|
|
tp = (unsigned short *) to;
|
|
fp = (unsigned short *) from;
|
|
while (clen--) {
|
|
*tp++ = *fp++;
|
|
fp++;
|
|
}
|
|
|
|
clen = len & 1;
|
|
|
|
rtp = (unsigned char *) tp;
|
|
rfp = (unsigned char *) fp;
|
|
|
|
while (clen--) {
|
|
*rtp++ = *rfp++;
|
|
}
|
|
} else {
|
|
|
|
/*
|
|
* copy 16 Byte chunks
|
|
*/
|
|
clen = len >> 4;
|
|
tp = (unsigned short *) to;
|
|
fp = (unsigned short *) from;
|
|
while (clen--) {
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
*tp++ = *fp++;
|
|
fp += 8;
|
|
}
|
|
|
|
/*
|
|
* do the rest, if any.
|
|
*/
|
|
clen = len & 15;
|
|
rtp = (unsigned char *) tp;
|
|
rfp = (unsigned char *) fp;
|
|
while (clen--) {
|
|
*rtp++ = *rfp++;
|
|
}
|
|
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Setup the Lance Rx and Tx rings */
|
|
static void lance_init_ring(struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_init_block *ib;
|
|
int leptr;
|
|
int i;
|
|
|
|
ib = (struct lance_init_block *) (dev->mem_start);
|
|
|
|
/* Lock out other processes while setting up hardware */
|
|
netif_stop_queue(dev);
|
|
lp->rx_new = lp->tx_new = 0;
|
|
lp->rx_old = lp->tx_old = 0;
|
|
|
|
/* Copy the ethernet address to the lance init block.
|
|
* XXX bit 0 of the physical address registers has to be zero
|
|
*/
|
|
ib->phys_addr[0] = dev->dev_addr[0];
|
|
ib->phys_addr[1] = dev->dev_addr[1];
|
|
ib->phys_addr[4] = dev->dev_addr[2];
|
|
ib->phys_addr[5] = dev->dev_addr[3];
|
|
ib->phys_addr[8] = dev->dev_addr[4];
|
|
ib->phys_addr[9] = dev->dev_addr[5];
|
|
/* Setup the initialization block */
|
|
|
|
/* Setup rx descriptor pointer */
|
|
leptr = LANCE_ADDR(libdesc_offset(brx_ring, 0));
|
|
ib->rx_len = (LANCE_LOG_RX_BUFFERS << 13) | (leptr >> 16);
|
|
ib->rx_ptr = leptr;
|
|
if (ZERO)
|
|
printk("RX ptr: %8.8x(%8.8x)\n", leptr, libdesc_offset(brx_ring, 0));
|
|
|
|
/* Setup tx descriptor pointer */
|
|
leptr = LANCE_ADDR(libdesc_offset(btx_ring, 0));
|
|
ib->tx_len = (LANCE_LOG_TX_BUFFERS << 13) | (leptr >> 16);
|
|
ib->tx_ptr = leptr;
|
|
if (ZERO)
|
|
printk("TX ptr: %8.8x(%8.8x)\n", leptr, libdesc_offset(btx_ring, 0));
|
|
|
|
if (ZERO)
|
|
printk("TX rings:\n");
|
|
|
|
/* Setup the Tx ring entries */
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
leptr = (int) lp->tx_buf_ptr_lnc[i];
|
|
ib->btx_ring[i].tmd0 = leptr;
|
|
ib->btx_ring[i].tmd1_hadr = leptr >> 16;
|
|
ib->btx_ring[i].tmd1_bits = 0;
|
|
ib->btx_ring[i].length = 0xf000; /* The ones required by tmd2 */
|
|
ib->btx_ring[i].misc = 0;
|
|
if (i < 3 && ZERO)
|
|
printk("%d: 0x%8.8x(0x%8.8x)\n", i, leptr, (int) lp->tx_buf_ptr_cpu[i]);
|
|
}
|
|
|
|
/* Setup the Rx ring entries */
|
|
if (ZERO)
|
|
printk("RX rings:\n");
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
leptr = (int) lp->rx_buf_ptr_lnc[i];
|
|
ib->brx_ring[i].rmd0 = leptr;
|
|
ib->brx_ring[i].rmd1_hadr = leptr >> 16;
|
|
ib->brx_ring[i].rmd1_bits = LE_R1_OWN;
|
|
ib->brx_ring[i].length = -RX_BUFF_SIZE | 0xf000;
|
|
ib->brx_ring[i].mblength = 0;
|
|
if (i < 3 && ZERO)
|
|
printk("%d: 0x%8.8x(0x%8.8x)\n", i, leptr, (int) lp->rx_buf_ptr_cpu[i]);
|
|
}
|
|
iob();
|
|
}
|
|
|
|
static int init_restart_lance(struct lance_private *lp)
|
|
{
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
int i;
|
|
|
|
writereg(&ll->rap, LE_CSR0);
|
|
writereg(&ll->rdp, LE_C0_INIT);
|
|
|
|
/* Wait for the lance to complete initialization */
|
|
for (i = 0; (i < 100) && !(ll->rdp & LE_C0_IDON); i++) {
|
|
udelay(10);
|
|
}
|
|
if ((i == 100) || (ll->rdp & LE_C0_ERR)) {
|
|
printk("LANCE unopened after %d ticks, csr0=%4.4x.\n", i, ll->rdp);
|
|
return -1;
|
|
}
|
|
if ((ll->rdp & LE_C0_ERR)) {
|
|
printk("LANCE unopened after %d ticks, csr0=%4.4x.\n", i, ll->rdp);
|
|
return -1;
|
|
}
|
|
writereg(&ll->rdp, LE_C0_IDON);
|
|
writereg(&ll->rdp, LE_C0_STRT);
|
|
writereg(&ll->rdp, LE_C0_INEA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lance_rx(struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_init_block *ib;
|
|
volatile struct lance_rx_desc *rd = 0;
|
|
unsigned char bits;
|
|
int len = 0;
|
|
struct sk_buff *skb = 0;
|
|
ib = (struct lance_init_block *) (dev->mem_start);
|
|
|
|
#ifdef TEST_HITS
|
|
{
|
|
int i;
|
|
|
|
printk("[");
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
if (i == lp->rx_new)
|
|
printk("%s", ib->brx_ring[i].rmd1_bits &
|
|
LE_R1_OWN ? "_" : "X");
|
|
else
|
|
printk("%s", ib->brx_ring[i].rmd1_bits &
|
|
LE_R1_OWN ? "." : "1");
|
|
}
|
|
printk("]");
|
|
}
|
|
#endif
|
|
|
|
for (rd = &ib->brx_ring[lp->rx_new];
|
|
!((bits = rd->rmd1_bits) & LE_R1_OWN);
|
|
rd = &ib->brx_ring[lp->rx_new]) {
|
|
|
|
/* We got an incomplete frame? */
|
|
if ((bits & LE_R1_POK) != LE_R1_POK) {
|
|
lp->stats.rx_over_errors++;
|
|
lp->stats.rx_errors++;
|
|
} else if (bits & LE_R1_ERR) {
|
|
/* Count only the end frame as a rx error,
|
|
* not the beginning
|
|
*/
|
|
if (bits & LE_R1_BUF)
|
|
lp->stats.rx_fifo_errors++;
|
|
if (bits & LE_R1_CRC)
|
|
lp->stats.rx_crc_errors++;
|
|
if (bits & LE_R1_OFL)
|
|
lp->stats.rx_over_errors++;
|
|
if (bits & LE_R1_FRA)
|
|
lp->stats.rx_frame_errors++;
|
|
if (bits & LE_R1_EOP)
|
|
lp->stats.rx_errors++;
|
|
} else {
|
|
len = (rd->mblength & 0xfff) - 4;
|
|
skb = dev_alloc_skb(len + 2);
|
|
|
|
if (skb == 0) {
|
|
printk("%s: Memory squeeze, deferring packet.\n",
|
|
dev->name);
|
|
lp->stats.rx_dropped++;
|
|
rd->mblength = 0;
|
|
rd->rmd1_bits = LE_R1_OWN;
|
|
lp->rx_new = (lp->rx_new + 1) & RX_RING_MOD_MASK;
|
|
return 0;
|
|
}
|
|
lp->stats.rx_bytes += len;
|
|
|
|
skb->dev = dev;
|
|
skb_reserve(skb, 2); /* 16 byte align */
|
|
skb_put(skb, len); /* make room */
|
|
|
|
cp_from_buf(lp->type, skb->data,
|
|
(char *)lp->rx_buf_ptr_cpu[lp->rx_new],
|
|
len);
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
lp->stats.rx_packets++;
|
|
}
|
|
|
|
/* Return the packet to the pool */
|
|
rd->mblength = 0;
|
|
rd->length = -RX_BUFF_SIZE | 0xf000;
|
|
rd->rmd1_bits = LE_R1_OWN;
|
|
lp->rx_new = (lp->rx_new + 1) & RX_RING_MOD_MASK;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void lance_tx(struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_init_block *ib;
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
volatile struct lance_tx_desc *td;
|
|
int i, j;
|
|
int status;
|
|
ib = (struct lance_init_block *) (dev->mem_start);
|
|
j = lp->tx_old;
|
|
|
|
spin_lock(&lp->lock);
|
|
|
|
for (i = j; i != lp->tx_new; i = j) {
|
|
td = &ib->btx_ring[i];
|
|
/* If we hit a packet not owned by us, stop */
|
|
if (td->tmd1_bits & LE_T1_OWN)
|
|
break;
|
|
|
|
if (td->tmd1_bits & LE_T1_ERR) {
|
|
status = td->misc;
|
|
|
|
lp->stats.tx_errors++;
|
|
if (status & LE_T3_RTY)
|
|
lp->stats.tx_aborted_errors++;
|
|
if (status & LE_T3_LCOL)
|
|
lp->stats.tx_window_errors++;
|
|
|
|
if (status & LE_T3_CLOS) {
|
|
lp->stats.tx_carrier_errors++;
|
|
printk("%s: Carrier Lost\n", dev->name);
|
|
/* Stop the lance */
|
|
writereg(&ll->rap, LE_CSR0);
|
|
writereg(&ll->rdp, LE_C0_STOP);
|
|
lance_init_ring(dev);
|
|
load_csrs(lp);
|
|
init_restart_lance(lp);
|
|
goto out;
|
|
}
|
|
/* Buffer errors and underflows turn off the
|
|
* transmitter, restart the adapter.
|
|
*/
|
|
if (status & (LE_T3_BUF | LE_T3_UFL)) {
|
|
lp->stats.tx_fifo_errors++;
|
|
|
|
printk("%s: Tx: ERR_BUF|ERR_UFL, restarting\n",
|
|
dev->name);
|
|
/* Stop the lance */
|
|
writereg(&ll->rap, LE_CSR0);
|
|
writereg(&ll->rdp, LE_C0_STOP);
|
|
lance_init_ring(dev);
|
|
load_csrs(lp);
|
|
init_restart_lance(lp);
|
|
goto out;
|
|
}
|
|
} else if ((td->tmd1_bits & LE_T1_POK) == LE_T1_POK) {
|
|
/*
|
|
* So we don't count the packet more than once.
|
|
*/
|
|
td->tmd1_bits &= ~(LE_T1_POK);
|
|
|
|
/* One collision before packet was sent. */
|
|
if (td->tmd1_bits & LE_T1_EONE)
|
|
lp->stats.collisions++;
|
|
|
|
/* More than one collision, be optimistic. */
|
|
if (td->tmd1_bits & LE_T1_EMORE)
|
|
lp->stats.collisions += 2;
|
|
|
|
lp->stats.tx_packets++;
|
|
}
|
|
j = (j + 1) & TX_RING_MOD_MASK;
|
|
}
|
|
lp->tx_old = j;
|
|
out:
|
|
if (netif_queue_stopped(dev) &&
|
|
TX_BUFFS_AVAIL > 0)
|
|
netif_wake_queue(dev);
|
|
|
|
spin_unlock(&lp->lock);
|
|
}
|
|
|
|
static irqreturn_t lance_dma_merr_int(const int irq, void *dev_id,
|
|
struct pt_regs *regs)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
|
|
|
printk("%s: DMA error\n", dev->name);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t
|
|
lance_interrupt(const int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
int csr0;
|
|
|
|
writereg(&ll->rap, LE_CSR0);
|
|
csr0 = ll->rdp;
|
|
|
|
/* Acknowledge all the interrupt sources ASAP */
|
|
writereg(&ll->rdp, csr0 & (LE_C0_INTR | LE_C0_TINT | LE_C0_RINT));
|
|
|
|
if ((csr0 & LE_C0_ERR)) {
|
|
/* Clear the error condition */
|
|
writereg(&ll->rdp, LE_C0_BABL | LE_C0_ERR | LE_C0_MISS |
|
|
LE_C0_CERR | LE_C0_MERR);
|
|
}
|
|
if (csr0 & LE_C0_RINT)
|
|
lance_rx(dev);
|
|
|
|
if (csr0 & LE_C0_TINT)
|
|
lance_tx(dev);
|
|
|
|
if (csr0 & LE_C0_BABL)
|
|
lp->stats.tx_errors++;
|
|
|
|
if (csr0 & LE_C0_MISS)
|
|
lp->stats.rx_errors++;
|
|
|
|
if (csr0 & LE_C0_MERR) {
|
|
printk("%s: Memory error, status %04x\n", dev->name, csr0);
|
|
|
|
writereg(&ll->rdp, LE_C0_STOP);
|
|
|
|
lance_init_ring(dev);
|
|
load_csrs(lp);
|
|
init_restart_lance(lp);
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
writereg(&ll->rdp, LE_C0_INEA);
|
|
writereg(&ll->rdp, LE_C0_INEA);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
struct net_device *last_dev = 0;
|
|
|
|
static int lance_open(struct net_device *dev)
|
|
{
|
|
volatile struct lance_init_block *ib = (struct lance_init_block *) (dev->mem_start);
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
int status = 0;
|
|
|
|
last_dev = dev;
|
|
|
|
/* Stop the Lance */
|
|
writereg(&ll->rap, LE_CSR0);
|
|
writereg(&ll->rdp, LE_C0_STOP);
|
|
|
|
/* Set mode and clear multicast filter only at device open,
|
|
* so that lance_init_ring() called at any error will not
|
|
* forget multicast filters.
|
|
*
|
|
* BTW it is common bug in all lance drivers! --ANK
|
|
*/
|
|
ib->mode = 0;
|
|
ib->filter [0] = 0;
|
|
ib->filter [2] = 0;
|
|
ib->filter [4] = 0;
|
|
ib->filter [6] = 0;
|
|
|
|
lance_init_ring(dev);
|
|
load_csrs(lp);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
/* Associate IRQ with lance_interrupt */
|
|
if (request_irq(dev->irq, &lance_interrupt, 0, "lance", dev)) {
|
|
printk("%s: Can't get IRQ %d\n", dev->name, dev->irq);
|
|
return -EAGAIN;
|
|
}
|
|
if (lp->dma_irq >= 0) {
|
|
unsigned long flags;
|
|
|
|
if (request_irq(lp->dma_irq, &lance_dma_merr_int, 0,
|
|
"lance error", dev)) {
|
|
free_irq(dev->irq, dev);
|
|
printk("%s: Can't get DMA IRQ %d\n", dev->name,
|
|
lp->dma_irq);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
spin_lock_irqsave(&ioasic_ssr_lock, flags);
|
|
|
|
fast_mb();
|
|
/* Enable I/O ASIC LANCE DMA. */
|
|
ioasic_write(IO_REG_SSR,
|
|
ioasic_read(IO_REG_SSR) | IO_SSR_LANCE_DMA_EN);
|
|
|
|
fast_mb();
|
|
spin_unlock_irqrestore(&ioasic_ssr_lock, flags);
|
|
}
|
|
|
|
status = init_restart_lance(lp);
|
|
return status;
|
|
}
|
|
|
|
static int lance_close(struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
|
|
netif_stop_queue(dev);
|
|
del_timer_sync(&lp->multicast_timer);
|
|
|
|
/* Stop the card */
|
|
writereg(&ll->rap, LE_CSR0);
|
|
writereg(&ll->rdp, LE_C0_STOP);
|
|
|
|
if (lp->dma_irq >= 0) {
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ioasic_ssr_lock, flags);
|
|
|
|
fast_mb();
|
|
/* Disable I/O ASIC LANCE DMA. */
|
|
ioasic_write(IO_REG_SSR,
|
|
ioasic_read(IO_REG_SSR) & ~IO_SSR_LANCE_DMA_EN);
|
|
|
|
fast_iob();
|
|
spin_unlock_irqrestore(&ioasic_ssr_lock, flags);
|
|
|
|
free_irq(lp->dma_irq, dev);
|
|
}
|
|
free_irq(dev->irq, dev);
|
|
return 0;
|
|
}
|
|
|
|
static inline int lance_reset(struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
int status;
|
|
|
|
/* Stop the lance */
|
|
writereg(&ll->rap, LE_CSR0);
|
|
writereg(&ll->rdp, LE_C0_STOP);
|
|
|
|
lance_init_ring(dev);
|
|
load_csrs(lp);
|
|
dev->trans_start = jiffies;
|
|
status = init_restart_lance(lp);
|
|
return status;
|
|
}
|
|
|
|
static void lance_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
|
|
printk(KERN_ERR "%s: transmit timed out, status %04x, reset\n",
|
|
dev->name, ll->rdp);
|
|
lance_reset(dev);
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
volatile struct lance_init_block *ib = (struct lance_init_block *) (dev->mem_start);
|
|
int entry, skblen, len;
|
|
|
|
skblen = skb->len;
|
|
|
|
len = skblen;
|
|
|
|
if (len < ETH_ZLEN) {
|
|
skb = skb_padto(skb, ETH_ZLEN);
|
|
if (skb == NULL)
|
|
return 0;
|
|
len = ETH_ZLEN;
|
|
}
|
|
|
|
lp->stats.tx_bytes += len;
|
|
|
|
entry = lp->tx_new & TX_RING_MOD_MASK;
|
|
ib->btx_ring[entry].length = (-len);
|
|
ib->btx_ring[entry].misc = 0;
|
|
|
|
cp_to_buf(lp->type, (char *)lp->tx_buf_ptr_cpu[entry], skb->data,
|
|
skblen);
|
|
|
|
/* Clear the slack of the packet, do I need this? */
|
|
/* For a firewall it's a good idea - AC */
|
|
/*
|
|
if (len != skblen)
|
|
memset ((char *) &ib->tx_buf [entry][skblen], 0, (len - skblen) << 1);
|
|
*/
|
|
|
|
/* Now, give the packet to the lance */
|
|
ib->btx_ring[entry].tmd1_bits = (LE_T1_POK | LE_T1_OWN);
|
|
lp->tx_new = (lp->tx_new + 1) & TX_RING_MOD_MASK;
|
|
|
|
if (TX_BUFFS_AVAIL <= 0)
|
|
netif_stop_queue(dev);
|
|
|
|
/* Kick the lance: transmit now */
|
|
writereg(&ll->rdp, LE_C0_INEA | LE_C0_TDMD);
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
dev->trans_start = jiffies;
|
|
dev_kfree_skb(skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *lance_get_stats(struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
|
|
return &lp->stats;
|
|
}
|
|
|
|
static void lance_load_multicast(struct net_device *dev)
|
|
{
|
|
volatile struct lance_init_block *ib = (struct lance_init_block *) (dev->mem_start);
|
|
volatile u16 *mcast_table = (u16 *) & ib->filter;
|
|
struct dev_mc_list *dmi = dev->mc_list;
|
|
char *addrs;
|
|
int i;
|
|
u32 crc;
|
|
|
|
/* set all multicast bits */
|
|
if (dev->flags & IFF_ALLMULTI) {
|
|
ib->filter[0] = 0xffff;
|
|
ib->filter[2] = 0xffff;
|
|
ib->filter[4] = 0xffff;
|
|
ib->filter[6] = 0xffff;
|
|
return;
|
|
}
|
|
/* clear the multicast filter */
|
|
ib->filter[0] = 0;
|
|
ib->filter[2] = 0;
|
|
ib->filter[4] = 0;
|
|
ib->filter[6] = 0;
|
|
|
|
/* Add addresses */
|
|
for (i = 0; i < dev->mc_count; i++) {
|
|
addrs = dmi->dmi_addr;
|
|
dmi = dmi->next;
|
|
|
|
/* multicast address? */
|
|
if (!(*addrs & 1))
|
|
continue;
|
|
|
|
crc = ether_crc_le(ETH_ALEN, addrs);
|
|
crc = crc >> 26;
|
|
mcast_table[2 * (crc >> 4)] |= 1 << (crc & 0xf);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void lance_set_multicast(struct net_device *dev)
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
volatile struct lance_init_block *ib;
|
|
volatile struct lance_regs *ll = lp->ll;
|
|
|
|
ib = (struct lance_init_block *) (dev->mem_start);
|
|
|
|
if (!netif_running(dev))
|
|
return;
|
|
|
|
if (lp->tx_old != lp->tx_new) {
|
|
mod_timer(&lp->multicast_timer, jiffies + 4 * HZ/100);
|
|
netif_wake_queue(dev);
|
|
return;
|
|
}
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
writereg(&ll->rap, LE_CSR0);
|
|
writereg(&ll->rdp, LE_C0_STOP);
|
|
|
|
lance_init_ring(dev);
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
ib->mode |= LE_MO_PROM;
|
|
} else {
|
|
ib->mode &= ~LE_MO_PROM;
|
|
lance_load_multicast(dev);
|
|
}
|
|
load_csrs(lp);
|
|
init_restart_lance(lp);
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static void lance_set_multicast_retry(unsigned long _opaque)
|
|
{
|
|
struct net_device *dev = (struct net_device *) _opaque;
|
|
|
|
lance_set_multicast(dev);
|
|
}
|
|
|
|
static int __init dec_lance_init(const int type, const int slot)
|
|
{
|
|
static unsigned version_printed;
|
|
static const char fmt[] = "declance%d";
|
|
char name[10];
|
|
struct net_device *dev;
|
|
struct lance_private *lp;
|
|
volatile struct lance_regs *ll;
|
|
int i, ret;
|
|
unsigned long esar_base;
|
|
unsigned char *esar;
|
|
|
|
if (dec_lance_debug && version_printed++ == 0)
|
|
printk(version);
|
|
|
|
i = 0;
|
|
dev = root_lance_dev;
|
|
while (dev) {
|
|
i++;
|
|
lp = (struct lance_private *)dev->priv;
|
|
dev = lp->next;
|
|
}
|
|
snprintf(name, sizeof(name), fmt, i);
|
|
|
|
dev = alloc_etherdev(sizeof(struct lance_private));
|
|
if (!dev) {
|
|
printk(KERN_ERR "%s: Unable to allocate etherdev, aborting.\n",
|
|
name);
|
|
ret = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
/*
|
|
* alloc_etherdev ensures the data structures used by the LANCE
|
|
* are aligned.
|
|
*/
|
|
lp = netdev_priv(dev);
|
|
spin_lock_init(&lp->lock);
|
|
|
|
lp->type = type;
|
|
lp->slot = slot;
|
|
switch (type) {
|
|
#ifdef CONFIG_TC
|
|
case ASIC_LANCE:
|
|
dev->base_addr = CKSEG1ADDR(dec_kn_slot_base + IOASIC_LANCE);
|
|
|
|
/* buffer space for the on-board LANCE shared memory */
|
|
/*
|
|
* FIXME: ugly hack!
|
|
*/
|
|
dev->mem_start = CKSEG1ADDR(0x00020000);
|
|
dev->mem_end = dev->mem_start + 0x00020000;
|
|
dev->irq = dec_interrupt[DEC_IRQ_LANCE];
|
|
esar_base = CKSEG1ADDR(dec_kn_slot_base + IOASIC_ESAR);
|
|
|
|
/* Workaround crash with booting KN04 2.1k from Disk */
|
|
memset((void *)dev->mem_start, 0,
|
|
dev->mem_end - dev->mem_start);
|
|
|
|
/*
|
|
* setup the pointer arrays, this sucks [tm] :-(
|
|
*/
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
lp->rx_buf_ptr_cpu[i] =
|
|
(char *)(dev->mem_start + BUF_OFFSET_CPU +
|
|
2 * i * RX_BUFF_SIZE);
|
|
lp->rx_buf_ptr_lnc[i] =
|
|
(char *)(BUF_OFFSET_LNC + i * RX_BUFF_SIZE);
|
|
}
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
lp->tx_buf_ptr_cpu[i] =
|
|
(char *)(dev->mem_start + BUF_OFFSET_CPU +
|
|
2 * RX_RING_SIZE * RX_BUFF_SIZE +
|
|
2 * i * TX_BUFF_SIZE);
|
|
lp->tx_buf_ptr_lnc[i] =
|
|
(char *)(BUF_OFFSET_LNC +
|
|
RX_RING_SIZE * RX_BUFF_SIZE +
|
|
i * TX_BUFF_SIZE);
|
|
}
|
|
|
|
/* Setup I/O ASIC LANCE DMA. */
|
|
lp->dma_irq = dec_interrupt[DEC_IRQ_LANCE_MERR];
|
|
ioasic_write(IO_REG_LANCE_DMA_P,
|
|
CPHYSADDR(dev->mem_start) << 3);
|
|
|
|
break;
|
|
|
|
case PMAD_LANCE:
|
|
claim_tc_card(slot);
|
|
|
|
dev->mem_start = CKSEG1ADDR(get_tc_base_addr(slot));
|
|
dev->base_addr = dev->mem_start + 0x100000;
|
|
dev->irq = get_tc_irq_nr(slot);
|
|
esar_base = dev->mem_start + 0x1c0002;
|
|
lp->dma_irq = -1;
|
|
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
lp->rx_buf_ptr_cpu[i] =
|
|
(char *)(dev->mem_start + BUF_OFFSET_CPU +
|
|
i * RX_BUFF_SIZE);
|
|
lp->rx_buf_ptr_lnc[i] =
|
|
(char *)(BUF_OFFSET_LNC + i * RX_BUFF_SIZE);
|
|
}
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
lp->tx_buf_ptr_cpu[i] =
|
|
(char *)(dev->mem_start + BUF_OFFSET_CPU +
|
|
RX_RING_SIZE * RX_BUFF_SIZE +
|
|
i * TX_BUFF_SIZE);
|
|
lp->tx_buf_ptr_lnc[i] =
|
|
(char *)(BUF_OFFSET_LNC +
|
|
RX_RING_SIZE * RX_BUFF_SIZE +
|
|
i * TX_BUFF_SIZE);
|
|
}
|
|
|
|
break;
|
|
#endif
|
|
|
|
case PMAX_LANCE:
|
|
dev->irq = dec_interrupt[DEC_IRQ_LANCE];
|
|
dev->base_addr = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE);
|
|
dev->mem_start = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE_MEM);
|
|
esar_base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_ESAR + 1);
|
|
lp->dma_irq = -1;
|
|
|
|
/*
|
|
* setup the pointer arrays, this sucks [tm] :-(
|
|
*/
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
lp->rx_buf_ptr_cpu[i] =
|
|
(char *)(dev->mem_start + BUF_OFFSET_CPU +
|
|
2 * i * RX_BUFF_SIZE);
|
|
lp->rx_buf_ptr_lnc[i] =
|
|
(char *)(BUF_OFFSET_LNC + i * RX_BUFF_SIZE);
|
|
}
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
lp->tx_buf_ptr_cpu[i] =
|
|
(char *)(dev->mem_start + BUF_OFFSET_CPU +
|
|
2 * RX_RING_SIZE * RX_BUFF_SIZE +
|
|
2 * i * TX_BUFF_SIZE);
|
|
lp->tx_buf_ptr_lnc[i] =
|
|
(char *)(BUF_OFFSET_LNC +
|
|
RX_RING_SIZE * RX_BUFF_SIZE +
|
|
i * TX_BUFF_SIZE);
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "%s: declance_init called with unknown type\n",
|
|
name);
|
|
ret = -ENODEV;
|
|
goto err_out_free_dev;
|
|
}
|
|
|
|
ll = (struct lance_regs *) dev->base_addr;
|
|
esar = (unsigned char *) esar_base;
|
|
|
|
/* prom checks */
|
|
/* First, check for test pattern */
|
|
if (esar[0x60] != 0xff && esar[0x64] != 0x00 &&
|
|
esar[0x68] != 0x55 && esar[0x6c] != 0xaa) {
|
|
printk(KERN_ERR
|
|
"%s: Ethernet station address prom not found!\n",
|
|
name);
|
|
ret = -ENODEV;
|
|
goto err_out_free_dev;
|
|
}
|
|
/* Check the prom contents */
|
|
for (i = 0; i < 8; i++) {
|
|
if (esar[i * 4] != esar[0x3c - i * 4] &&
|
|
esar[i * 4] != esar[0x40 + i * 4] &&
|
|
esar[0x3c - i * 4] != esar[0x40 + i * 4]) {
|
|
printk(KERN_ERR "%s: Something is wrong with the "
|
|
"ethernet station address prom!\n", name);
|
|
ret = -ENODEV;
|
|
goto err_out_free_dev;
|
|
}
|
|
}
|
|
|
|
/* Copy the ethernet address to the device structure, later to the
|
|
* lance initialization block so the lance gets it every time it's
|
|
* (re)initialized.
|
|
*/
|
|
switch (type) {
|
|
case ASIC_LANCE:
|
|
printk("%s: IOASIC onboard LANCE, addr = ", name);
|
|
break;
|
|
case PMAD_LANCE:
|
|
printk("%s: PMAD-AA, addr = ", name);
|
|
break;
|
|
case PMAX_LANCE:
|
|
printk("%s: PMAX onboard LANCE, addr = ", name);
|
|
break;
|
|
}
|
|
for (i = 0; i < 6; i++) {
|
|
dev->dev_addr[i] = esar[i * 4];
|
|
printk("%2.2x%c", dev->dev_addr[i], i == 5 ? ',' : ':');
|
|
}
|
|
|
|
printk(" irq = %d\n", dev->irq);
|
|
|
|
dev->open = &lance_open;
|
|
dev->stop = &lance_close;
|
|
dev->hard_start_xmit = &lance_start_xmit;
|
|
dev->tx_timeout = &lance_tx_timeout;
|
|
dev->watchdog_timeo = 5*HZ;
|
|
dev->get_stats = &lance_get_stats;
|
|
dev->set_multicast_list = &lance_set_multicast;
|
|
|
|
/* lp->ll is the location of the registers for lance card */
|
|
lp->ll = ll;
|
|
|
|
/* busmaster_regval (CSR3) should be zero according to the PMAD-AA
|
|
* specification.
|
|
*/
|
|
lp->busmaster_regval = 0;
|
|
|
|
dev->dma = 0;
|
|
|
|
/* We cannot sleep if the chip is busy during a
|
|
* multicast list update event, because such events
|
|
* can occur from interrupts (ex. IPv6). So we
|
|
* use a timer to try again later when necessary. -DaveM
|
|
*/
|
|
init_timer(&lp->multicast_timer);
|
|
lp->multicast_timer.data = (unsigned long) dev;
|
|
lp->multicast_timer.function = &lance_set_multicast_retry;
|
|
|
|
ret = register_netdev(dev);
|
|
if (ret) {
|
|
printk(KERN_ERR
|
|
"%s: Unable to register netdev, aborting.\n", name);
|
|
goto err_out_free_dev;
|
|
}
|
|
|
|
lp->next = root_lance_dev;
|
|
root_lance_dev = dev;
|
|
|
|
printk("%s: registered as %s.\n", name, dev->name);
|
|
return 0;
|
|
|
|
err_out_free_dev:
|
|
kfree(dev);
|
|
|
|
err_out:
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* Find all the lance cards on the system and initialize them */
|
|
static int __init dec_lance_probe(void)
|
|
{
|
|
int count = 0;
|
|
|
|
/* Scan slots for PMAD-AA cards first. */
|
|
#ifdef CONFIG_TC
|
|
if (TURBOCHANNEL) {
|
|
int slot;
|
|
|
|
while ((slot = search_tc_card("PMAD-AA")) >= 0) {
|
|
if (dec_lance_init(PMAD_LANCE, slot) < 0)
|
|
break;
|
|
count++;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Then handle onboard devices. */
|
|
if (dec_interrupt[DEC_IRQ_LANCE] >= 0) {
|
|
if (dec_interrupt[DEC_IRQ_LANCE_MERR] >= 0) {
|
|
#ifdef CONFIG_TC
|
|
if (dec_lance_init(ASIC_LANCE, -1) >= 0)
|
|
count++;
|
|
#endif
|
|
} else if (!TURBOCHANNEL) {
|
|
if (dec_lance_init(PMAX_LANCE, -1) >= 0)
|
|
count++;
|
|
}
|
|
}
|
|
|
|
return (count > 0) ? 0 : -ENODEV;
|
|
}
|
|
|
|
static void __exit dec_lance_cleanup(void)
|
|
{
|
|
while (root_lance_dev) {
|
|
struct net_device *dev = root_lance_dev;
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
unregister_netdev(dev);
|
|
#ifdef CONFIG_TC
|
|
if (lp->slot >= 0)
|
|
release_tc_card(lp->slot);
|
|
#endif
|
|
root_lance_dev = lp->next;
|
|
free_netdev(dev);
|
|
}
|
|
}
|
|
|
|
module_init(dec_lance_probe);
|
|
module_exit(dec_lance_cleanup);
|