Jon Hunter bba25915b1 arm64: tegra: Fix ethernet phy-mode for Jetson Xavier ... The 'phy-mode' property is currently defined as 'rgmii' for Jetson Xavier. This indicates that the RGMII RX and TX delays are set by the MAC and the internal delays set by the PHY are not used. If the Marvell PHY driver is enabled, such that it is used and not the generic PHY, ethernet failures are seen (DHCP is failing to obtain an IP address) and this is caused because the Marvell PHY driver is disabling the internal RX and TX delays. For Jetson Xavier the internal PHY RX and TX delay should be used and so fix this by setting the 'phy-mode' to 'rgmii-id' and not 'rgmii'. Fixes: f89b58ce71 ("arm64: tegra: Add ethernet controller on Tegra194") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>		2020-05-20 15:26:09 +02:00
..
dts	arm64: tegra: Fix ethernet phy-mode for Jetson Xavier	2020-05-20 15:26:09 +02:00
.gitignore	.gitignore: add SPDX License Identifier	2020-03-25 11:50:48 +01:00
install.sh
Makefile	arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'	2020-01-21 16:28:36 +00:00