mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 08:36:43 +07:00
84b315ee89
The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
585 lines
14 KiB
C
585 lines
14 KiB
C
/*
|
|
* wm8523.c -- WM8523 ALSA SoC Audio driver
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics plc
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "wm8523.h"
|
|
|
|
#define WM8523_NUM_SUPPLIES 2
|
|
static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = {
|
|
"AVDD",
|
|
"LINEVDD",
|
|
};
|
|
|
|
#define WM8523_NUM_RATES 7
|
|
|
|
/* codec private data */
|
|
struct wm8523_priv {
|
|
enum snd_soc_control_type control_type;
|
|
struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
|
|
unsigned int sysclk;
|
|
unsigned int rate_constraint_list[WM8523_NUM_RATES];
|
|
struct snd_pcm_hw_constraint_list rate_constraint;
|
|
};
|
|
|
|
static const u16 wm8523_reg[WM8523_REGISTER_COUNT] = {
|
|
0x8523, /* R0 - DEVICE_ID */
|
|
0x0001, /* R1 - REVISION */
|
|
0x0000, /* R2 - PSCTRL1 */
|
|
0x1812, /* R3 - AIF_CTRL1 */
|
|
0x0000, /* R4 - AIF_CTRL2 */
|
|
0x0001, /* R5 - DAC_CTRL3 */
|
|
0x0190, /* R6 - DAC_GAINL */
|
|
0x0190, /* R7 - DAC_GAINR */
|
|
0x0000, /* R8 - ZERO_DETECT */
|
|
};
|
|
|
|
static int wm8523_volatile_register(struct snd_soc_codec *codec, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case WM8523_DEVICE_ID:
|
|
case WM8523_REVISION:
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int wm8523_reset(struct snd_soc_codec *codec)
|
|
{
|
|
return snd_soc_write(codec, WM8523_DEVICE_ID, 0);
|
|
}
|
|
|
|
static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0);
|
|
|
|
static const char *wm8523_zd_count_text[] = {
|
|
"1024",
|
|
"2048",
|
|
};
|
|
|
|
static const struct soc_enum wm8523_zc_count =
|
|
SOC_ENUM_SINGLE(WM8523_ZERO_DETECT, 0, 2, wm8523_zd_count_text);
|
|
|
|
static const struct snd_kcontrol_new wm8523_controls[] = {
|
|
SOC_DOUBLE_R_TLV("Playback Volume", WM8523_DAC_GAINL, WM8523_DAC_GAINR,
|
|
0, 448, 0, dac_tlv),
|
|
SOC_SINGLE("ZC Switch", WM8523_DAC_CTRL3, 4, 1, 0),
|
|
SOC_SINGLE("Playback Deemphasis Switch", WM8523_AIF_CTRL1, 8, 1, 0),
|
|
SOC_DOUBLE("Playback Switch", WM8523_DAC_CTRL3, 2, 3, 1, 1),
|
|
SOC_SINGLE("Volume Ramp Up Switch", WM8523_DAC_CTRL3, 1, 1, 0),
|
|
SOC_SINGLE("Volume Ramp Down Switch", WM8523_DAC_CTRL3, 0, 1, 0),
|
|
SOC_ENUM("Zero Detect Count", wm8523_zc_count),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8523_dapm_widgets[] = {
|
|
SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_OUTPUT("LINEVOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("LINEVOUTR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8523_dapm_routes[] = {
|
|
{ "LINEVOUTL", NULL, "DAC" },
|
|
{ "LINEVOUTR", NULL, "DAC" },
|
|
};
|
|
|
|
static struct {
|
|
int value;
|
|
int ratio;
|
|
} lrclk_ratios[WM8523_NUM_RATES] = {
|
|
{ 1, 128 },
|
|
{ 2, 192 },
|
|
{ 3, 256 },
|
|
{ 4, 384 },
|
|
{ 5, 512 },
|
|
{ 6, 768 },
|
|
{ 7, 1152 },
|
|
};
|
|
|
|
static int wm8523_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
/* The set of sample rates that can be supported depends on the
|
|
* MCLK supplied to the CODEC - enforce this.
|
|
*/
|
|
if (!wm8523->sysclk) {
|
|
dev_err(codec->dev,
|
|
"No MCLK configured, call set_sysclk() on init\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_pcm_hw_constraint_list(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE,
|
|
&wm8523->rate_constraint);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_codec *codec = rtd->codec;
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
int i;
|
|
u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1);
|
|
u16 aifctrl2 = snd_soc_read(codec, WM8523_AIF_CTRL2);
|
|
|
|
/* Find a supported LRCLK ratio */
|
|
for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
|
|
if (wm8523->sysclk / params_rate(params) ==
|
|
lrclk_ratios[i].ratio)
|
|
break;
|
|
}
|
|
|
|
/* Should never happen, should be handled by constraints */
|
|
if (i == ARRAY_SIZE(lrclk_ratios)) {
|
|
dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n",
|
|
wm8523->sysclk / params_rate(params));
|
|
return -EINVAL;
|
|
}
|
|
|
|
aifctrl2 &= ~WM8523_SR_MASK;
|
|
aifctrl2 |= lrclk_ratios[i].value;
|
|
|
|
aifctrl1 &= ~WM8523_WL_MASK;
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
aifctrl1 |= 0x8;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
aifctrl1 |= 0x10;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
aifctrl1 |= 0x18;
|
|
break;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1);
|
|
snd_soc_write(codec, WM8523_AIF_CTRL2, aifctrl2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
unsigned int val;
|
|
int i;
|
|
|
|
wm8523->sysclk = freq;
|
|
|
|
wm8523->rate_constraint.count = 0;
|
|
for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
|
|
val = freq / lrclk_ratios[i].ratio;
|
|
/* Check that it's a standard rate since core can't
|
|
* cope with others and having the odd rates confuses
|
|
* constraint matching.
|
|
*/
|
|
switch (val) {
|
|
case 8000:
|
|
case 11025:
|
|
case 16000:
|
|
case 22050:
|
|
case 32000:
|
|
case 44100:
|
|
case 48000:
|
|
case 64000:
|
|
case 88200:
|
|
case 96000:
|
|
case 176400:
|
|
case 192000:
|
|
dev_dbg(codec->dev, "Supported sample rate: %dHz\n",
|
|
val);
|
|
wm8523->rate_constraint_list[i] = val;
|
|
wm8523->rate_constraint.count++;
|
|
break;
|
|
default:
|
|
dev_dbg(codec->dev, "Skipping sample rate: %dHz\n",
|
|
val);
|
|
}
|
|
}
|
|
|
|
/* Need at least one supported rate... */
|
|
if (wm8523->rate_constraint.count == 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int wm8523_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 aifctrl1 = snd_soc_read(codec, WM8523_AIF_CTRL1);
|
|
|
|
aifctrl1 &= ~(WM8523_BCLK_INV_MASK | WM8523_LRCLK_INV_MASK |
|
|
WM8523_FMT_MASK | WM8523_AIF_MSTR_MASK);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aifctrl1 |= WM8523_AIF_MSTR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
aifctrl1 |= 0x0002;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
aifctrl1 |= 0x0001;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
aifctrl1 |= 0x0003;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
aifctrl1 |= 0x0023;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
aifctrl1 |= WM8523_BCLK_INV | WM8523_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aifctrl1 |= WM8523_BCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
aifctrl1 |= WM8523_LRCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8523_AIF_CTRL1, aifctrl1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
u16 *reg_cache = codec->reg_cache;
|
|
int ret, i;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
/* Full power on */
|
|
snd_soc_update_bits(codec, WM8523_PSCTRL1,
|
|
WM8523_SYS_ENA_MASK, 3);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
|
|
wm8523->supplies);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev,
|
|
"Failed to enable supplies: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Initial power up */
|
|
snd_soc_update_bits(codec, WM8523_PSCTRL1,
|
|
WM8523_SYS_ENA_MASK, 1);
|
|
|
|
/* Sync back default/cached values */
|
|
for (i = WM8523_AIF_CTRL1;
|
|
i < WM8523_MAX_REGISTER; i++)
|
|
snd_soc_write(codec, i, reg_cache[i]);
|
|
|
|
|
|
msleep(100);
|
|
}
|
|
|
|
/* Power up to mute */
|
|
snd_soc_update_bits(codec, WM8523_PSCTRL1,
|
|
WM8523_SYS_ENA_MASK, 2);
|
|
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
/* The chip runs through the power down sequence for us. */
|
|
snd_soc_update_bits(codec, WM8523_PSCTRL1,
|
|
WM8523_SYS_ENA_MASK, 0);
|
|
msleep(100);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies),
|
|
wm8523->supplies);
|
|
break;
|
|
}
|
|
codec->dapm.bias_level = level;
|
|
return 0;
|
|
}
|
|
|
|
#define WM8523_RATES SNDRV_PCM_RATE_8000_192000
|
|
|
|
#define WM8523_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops wm8523_dai_ops = {
|
|
.startup = wm8523_startup,
|
|
.hw_params = wm8523_hw_params,
|
|
.set_sysclk = wm8523_set_dai_sysclk,
|
|
.set_fmt = wm8523_set_dai_fmt,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver wm8523_dai = {
|
|
.name = "wm8523-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2, /* Mono modes not yet supported */
|
|
.channels_max = 2,
|
|
.rates = WM8523_RATES,
|
|
.formats = WM8523_FORMATS,
|
|
},
|
|
.ops = &wm8523_dai_ops,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int wm8523_suspend(struct snd_soc_codec *codec)
|
|
{
|
|
wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8523_resume(struct snd_soc_codec *codec)
|
|
{
|
|
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define wm8523_suspend NULL
|
|
#define wm8523_resume NULL
|
|
#endif
|
|
|
|
static int wm8523_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
int ret, i;
|
|
|
|
wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0];
|
|
wm8523->rate_constraint.count =
|
|
ARRAY_SIZE(wm8523->rate_constraint_list);
|
|
|
|
ret = snd_soc_codec_set_cache_io(codec, 8, 16, wm8523->control_type);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++)
|
|
wm8523->supplies[i].supply = wm8523_supply_names[i];
|
|
|
|
ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8523->supplies),
|
|
wm8523->supplies);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
|
|
wm8523->supplies);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
|
|
goto err_get;
|
|
}
|
|
|
|
ret = snd_soc_read(codec, WM8523_DEVICE_ID);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Failed to read ID register\n");
|
|
goto err_enable;
|
|
}
|
|
if (ret != wm8523_reg[WM8523_DEVICE_ID]) {
|
|
dev_err(codec->dev, "Device is not a WM8523, ID is %x\n", ret);
|
|
ret = -EINVAL;
|
|
goto err_enable;
|
|
}
|
|
|
|
ret = snd_soc_read(codec, WM8523_REVISION);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Failed to read revision register\n");
|
|
goto err_enable;
|
|
}
|
|
dev_info(codec->dev, "revision %c\n",
|
|
(ret & WM8523_CHIP_REV_MASK) + 'A');
|
|
|
|
ret = wm8523_reset(codec);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Failed to issue reset\n");
|
|
goto err_enable;
|
|
}
|
|
|
|
/* Change some default settings - latch VU and enable ZC */
|
|
snd_soc_update_bits(codec, WM8523_DAC_GAINR,
|
|
WM8523_DACR_VU, WM8523_DACR_VU);
|
|
snd_soc_update_bits(codec, WM8523_DAC_CTRL3, WM8523_ZC, WM8523_ZC);
|
|
|
|
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
/* Bias level configuration will have done an extra enable */
|
|
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
|
|
|
|
return 0;
|
|
|
|
err_enable:
|
|
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
|
|
err_get:
|
|
regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wm8523_remove(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_wm8523 = {
|
|
.probe = wm8523_probe,
|
|
.remove = wm8523_remove,
|
|
.suspend = wm8523_suspend,
|
|
.resume = wm8523_resume,
|
|
.set_bias_level = wm8523_set_bias_level,
|
|
.reg_cache_size = WM8523_REGISTER_COUNT,
|
|
.reg_word_size = sizeof(u16),
|
|
.reg_cache_default = wm8523_reg,
|
|
.volatile_register = wm8523_volatile_register,
|
|
|
|
.controls = wm8523_controls,
|
|
.num_controls = ARRAY_SIZE(wm8523_controls),
|
|
.dapm_widgets = wm8523_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(wm8523_dapm_widgets),
|
|
.dapm_routes = wm8523_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(wm8523_dapm_routes),
|
|
};
|
|
|
|
static const struct of_device_id wm8523_of_match[] = {
|
|
{ .compatible = "wlf,wm8523" },
|
|
{ },
|
|
};
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
static __devinit int wm8523_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8523_priv *wm8523;
|
|
int ret;
|
|
|
|
wm8523 = kzalloc(sizeof(struct wm8523_priv), GFP_KERNEL);
|
|
if (wm8523 == NULL)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, wm8523);
|
|
wm8523->control_type = SND_SOC_I2C;
|
|
|
|
ret = snd_soc_register_codec(&i2c->dev,
|
|
&soc_codec_dev_wm8523, &wm8523_dai, 1);
|
|
if (ret < 0)
|
|
kfree(wm8523);
|
|
return ret;
|
|
|
|
}
|
|
|
|
static __devexit int wm8523_i2c_remove(struct i2c_client *client)
|
|
{
|
|
snd_soc_unregister_codec(&client->dev);
|
|
kfree(i2c_get_clientdata(client));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8523_i2c_id[] = {
|
|
{ "wm8523", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8523_i2c_id);
|
|
|
|
static struct i2c_driver wm8523_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8523",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = wm8523_of_match,
|
|
},
|
|
.probe = wm8523_i2c_probe,
|
|
.remove = __devexit_p(wm8523_i2c_remove),
|
|
.id_table = wm8523_i2c_id,
|
|
};
|
|
#endif
|
|
|
|
static int __init wm8523_modinit(void)
|
|
{
|
|
int ret;
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
ret = i2c_add_driver(&wm8523_i2c_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register WM8523 I2C driver: %d\n",
|
|
ret);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
module_init(wm8523_modinit);
|
|
|
|
static void __exit wm8523_exit(void)
|
|
{
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
i2c_del_driver(&wm8523_i2c_driver);
|
|
#endif
|
|
}
|
|
module_exit(wm8523_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8523 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|