linux_dsm_epyc7002/arch/x86/include/asm/tlbflush.h
David Howells 9b8de7479d FRV: Fix the section attribute on UP DECLARE_PER_CPU()
In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU()
does not agree with that specified by DEFINE_PER_CPU().  This means that
architectures that have a small data section references relative to a base
register may throw up linkage errors due to too great a displacement between
where the base register points and the per-CPU variable.

On FRV, the .h declaration says that the variable is in the .sdata section, but
the .c definition says it's actually in the .data section.  The linker throws
up the following errors:

kernel/built-in.o: In function `release_task':
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o
kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o

To fix this, DECLARE_PER_CPU() should simply apply the same section attribute
as does DEFINE_PER_CPU().  However, this is made slightly more complex by
virtue of the fact that there are several variants on DEFINE, so these need to
be matched by variants on DECLARE.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 19:39:59 -07:00

178 lines
4.0 KiB
C

#ifndef _ASM_X86_TLBFLUSH_H
#define _ASM_X86_TLBFLUSH_H
#include <linux/mm.h>
#include <linux/sched.h>
#include <asm/processor.h>
#include <asm/system.h>
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define __flush_tlb() __native_flush_tlb()
#define __flush_tlb_global() __native_flush_tlb_global()
#define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
#endif
static inline void __native_flush_tlb(void)
{
write_cr3(read_cr3());
}
static inline void __native_flush_tlb_global(void)
{
unsigned long flags;
unsigned long cr4;
/*
* Read-modify-write to CR4 - protect it from preemption and
* from interrupts. (Use the raw variant because this code can
* be called from deep inside debugging code.)
*/
raw_local_irq_save(flags);
cr4 = read_cr4();
/* clear PGE */
write_cr4(cr4 & ~X86_CR4_PGE);
/* write old PGE again and flush TLBs */
write_cr4(cr4);
raw_local_irq_restore(flags);
}
static inline void __native_flush_tlb_single(unsigned long addr)
{
asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
}
static inline void __flush_tlb_all(void)
{
if (cpu_has_pge)
__flush_tlb_global();
else
__flush_tlb();
}
static inline void __flush_tlb_one(unsigned long addr)
{
if (cpu_has_invlpg)
__flush_tlb_single(addr);
else
__flush_tlb();
}
#ifdef CONFIG_X86_32
# define TLB_FLUSH_ALL 0xffffffff
#else
# define TLB_FLUSH_ALL -1ULL
#endif
/*
* TLB flushing:
*
* - flush_tlb() flushes the current mm struct TLBs
* - flush_tlb_all() flushes all processes TLBs
* - flush_tlb_mm(mm) flushes the specified mm context TLB's
* - flush_tlb_page(vma, vmaddr) flushes one page
* - flush_tlb_range(vma, start, end) flushes a range of pages
* - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
* - flush_tlb_others(cpumask, mm, va) flushes TLBs on other cpus
*
* ..but the i386 has somewhat limited tlb flushing capabilities,
* and page-granular flushes are available only on i486 and up.
*
* x86-64 can only flush individual pages or full VMs. For a range flush
* we always do the full VM. Might be worth trying if for a small
* range a few INVLPGs in a row are a win.
*/
#ifndef CONFIG_SMP
#define flush_tlb() __flush_tlb()
#define flush_tlb_all() __flush_tlb_all()
#define local_flush_tlb() __flush_tlb()
static inline void flush_tlb_mm(struct mm_struct *mm)
{
if (mm == current->active_mm)
__flush_tlb();
}
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long addr)
{
if (vma->vm_mm == current->active_mm)
__flush_tlb_one(addr);
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
if (vma->vm_mm == current->active_mm)
__flush_tlb();
}
static inline void native_flush_tlb_others(const struct cpumask *cpumask,
struct mm_struct *mm,
unsigned long va)
{
}
static inline void reset_lazy_tlbstate(void)
{
}
#else /* SMP */
#include <asm/smp.h>
#define local_flush_tlb() __flush_tlb()
extern void flush_tlb_all(void);
extern void flush_tlb_current_task(void);
extern void flush_tlb_mm(struct mm_struct *);
extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
#define flush_tlb() flush_tlb_current_task()
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
flush_tlb_mm(vma->vm_mm);
}
void native_flush_tlb_others(const struct cpumask *cpumask,
struct mm_struct *mm, unsigned long va);
#define TLBSTATE_OK 1
#define TLBSTATE_LAZY 2
struct tlb_state {
struct mm_struct *active_mm;
int state;
};
DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
static inline void reset_lazy_tlbstate(void)
{
percpu_write(cpu_tlbstate.state, 0);
percpu_write(cpu_tlbstate.active_mm, &init_mm);
}
#endif /* SMP */
#ifndef CONFIG_PARAVIRT
#define flush_tlb_others(mask, mm, va) native_flush_tlb_others(mask, mm, va)
#endif
static inline void flush_tlb_kernel_range(unsigned long start,
unsigned long end)
{
flush_tlb_all();
}
extern void zap_low_mappings(void);
#endif /* _ASM_X86_TLBFLUSH_H */