linux_dsm_epyc7002/drivers/usb/gadget/f_sourcesink.c
Sebastian Andrzej Siewior 10287baec7 usb: gadget: always update HS/SS descriptors and create a copy of them
HS and SS descriptors are staticaly created. They are updated during the
bind process with the endpoint address, string id or interface numbers.

After that, the descriptor chain is linked to struct usb_function which
is used by composite in order to serve the GET_DESCRIPTOR requests,
number of available configs and so on.

There is no need to assign the HS descriptor only if the UDC supports
HS speed because composite won't report those to the host if HS support
has not been reached. The same reasoning is valid for SS.

This patch makes sure each function updates HS/SS descriptors
unconditionally and uses the newly introduced helper function to create a
copy the descriptors for the speed which is supported by the UDC.

While at that, also rename f->descriptors to f->fs_descriptors in order
to make it more explicit what that means.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:09:44 +02:00

893 lines
24 KiB
C

/*
* f_sourcesink.c - USB peripheral source/sink configuration driver
*
* Copyright (C) 2003-2008 David Brownell
* Copyright (C) 2008 by Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/* #define VERBOSE_DEBUG */
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
#include "g_zero.h"
#include "gadget_chips.h"
/*
* SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral
* controller drivers.
*
* This just sinks bulk packets OUT to the peripheral and sources them IN
* to the host, optionally with specific data patterns for integrity tests.
* As such it supports basic functionality and load tests.
*
* In terms of control messaging, this supports all the standard requests
* plus two that support control-OUT tests. If the optional "autoresume"
* mode is enabled, it provides good functional coverage for the "USBCV"
* test harness from USB-IF.
*
* Note that because this doesn't queue more than one request at a time,
* some other function must be used to test queueing logic. The network
* link (g_ether) is the best overall option for that, since its TX and RX
* queues are relatively independent, will receive a range of packet sizes,
* and can often be made to run out completely. Those issues are important
* when stress testing peripheral controller drivers.
*
*
* This is currently packaged as a configuration driver, which can't be
* combined with other functions to make composite devices. However, it
* can be combined with other independent configurations.
*/
struct f_sourcesink {
struct usb_function function;
struct usb_ep *in_ep;
struct usb_ep *out_ep;
struct usb_ep *iso_in_ep;
struct usb_ep *iso_out_ep;
int cur_alt;
};
static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
{
return container_of(f, struct f_sourcesink, function);
}
static unsigned pattern;
module_param(pattern, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none");
static unsigned isoc_interval = 4;
module_param(isoc_interval, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(isoc_interval, "1 - 16");
static unsigned isoc_maxpacket = 1024;
module_param(isoc_maxpacket, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
static unsigned isoc_mult;
module_param(isoc_mult, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)");
static unsigned isoc_maxburst;
module_param(isoc_maxburst, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)");
/*-------------------------------------------------------------------------*/
static struct usb_interface_descriptor source_sink_intf_alt0 = {
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bAlternateSetting = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
/* .iInterface = DYNAMIC */
};
static struct usb_interface_descriptor source_sink_intf_alt1 = {
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bAlternateSetting = 1,
.bNumEndpoints = 4,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
/* .iInterface = DYNAMIC */
};
/* full speed support: */
static struct usb_endpoint_descriptor fs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
static struct usb_endpoint_descriptor fs_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
static struct usb_endpoint_descriptor fs_iso_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.wMaxPacketSize = cpu_to_le16(1023),
.bInterval = 4,
};
static struct usb_endpoint_descriptor fs_iso_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.wMaxPacketSize = cpu_to_le16(1023),
.bInterval = 4,
};
static struct usb_descriptor_header *fs_source_sink_descs[] = {
(struct usb_descriptor_header *) &source_sink_intf_alt0,
(struct usb_descriptor_header *) &fs_sink_desc,
(struct usb_descriptor_header *) &fs_source_desc,
(struct usb_descriptor_header *) &source_sink_intf_alt1,
#define FS_ALT_IFC_1_OFFSET 3
(struct usb_descriptor_header *) &fs_sink_desc,
(struct usb_descriptor_header *) &fs_source_desc,
(struct usb_descriptor_header *) &fs_iso_sink_desc,
(struct usb_descriptor_header *) &fs_iso_source_desc,
NULL,
};
/* high speed support: */
static struct usb_endpoint_descriptor hs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
};
static struct usb_endpoint_descriptor hs_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
};
static struct usb_endpoint_descriptor hs_iso_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.wMaxPacketSize = cpu_to_le16(1024),
.bInterval = 4,
};
static struct usb_endpoint_descriptor hs_iso_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.wMaxPacketSize = cpu_to_le16(1024),
.bInterval = 4,
};
static struct usb_descriptor_header *hs_source_sink_descs[] = {
(struct usb_descriptor_header *) &source_sink_intf_alt0,
(struct usb_descriptor_header *) &hs_source_desc,
(struct usb_descriptor_header *) &hs_sink_desc,
(struct usb_descriptor_header *) &source_sink_intf_alt1,
#define HS_ALT_IFC_1_OFFSET 3
(struct usb_descriptor_header *) &hs_source_desc,
(struct usb_descriptor_header *) &hs_sink_desc,
(struct usb_descriptor_header *) &hs_iso_source_desc,
(struct usb_descriptor_header *) &hs_iso_sink_desc,
NULL,
};
/* super speed support: */
static struct usb_endpoint_descriptor ss_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(1024),
};
struct usb_ss_ep_comp_descriptor ss_source_comp_desc = {
.bLength = USB_DT_SS_EP_COMP_SIZE,
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
.bMaxBurst = 0,
.bmAttributes = 0,
.wBytesPerInterval = 0,
};
static struct usb_endpoint_descriptor ss_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(1024),
};
struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = {
.bLength = USB_DT_SS_EP_COMP_SIZE,
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
.bMaxBurst = 0,
.bmAttributes = 0,
.wBytesPerInterval = 0,
};
static struct usb_endpoint_descriptor ss_iso_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.wMaxPacketSize = cpu_to_le16(1024),
.bInterval = 4,
};
struct usb_ss_ep_comp_descriptor ss_iso_source_comp_desc = {
.bLength = USB_DT_SS_EP_COMP_SIZE,
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
.bMaxBurst = 0,
.bmAttributes = 0,
.wBytesPerInterval = cpu_to_le16(1024),
};
static struct usb_endpoint_descriptor ss_iso_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.wMaxPacketSize = cpu_to_le16(1024),
.bInterval = 4,
};
struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = {
.bLength = USB_DT_SS_EP_COMP_SIZE,
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
.bMaxBurst = 0,
.bmAttributes = 0,
.wBytesPerInterval = cpu_to_le16(1024),
};
static struct usb_descriptor_header *ss_source_sink_descs[] = {
(struct usb_descriptor_header *) &source_sink_intf_alt0,
(struct usb_descriptor_header *) &ss_source_desc,
(struct usb_descriptor_header *) &ss_source_comp_desc,
(struct usb_descriptor_header *) &ss_sink_desc,
(struct usb_descriptor_header *) &ss_sink_comp_desc,
(struct usb_descriptor_header *) &source_sink_intf_alt1,
#define SS_ALT_IFC_1_OFFSET 5
(struct usb_descriptor_header *) &ss_source_desc,
(struct usb_descriptor_header *) &ss_source_comp_desc,
(struct usb_descriptor_header *) &ss_sink_desc,
(struct usb_descriptor_header *) &ss_sink_comp_desc,
(struct usb_descriptor_header *) &ss_iso_source_desc,
(struct usb_descriptor_header *) &ss_iso_source_comp_desc,
(struct usb_descriptor_header *) &ss_iso_sink_desc,
(struct usb_descriptor_header *) &ss_iso_sink_comp_desc,
NULL,
};
/* function-specific strings: */
static struct usb_string strings_sourcesink[] = {
[0].s = "source and sink data",
{ } /* end of list */
};
static struct usb_gadget_strings stringtab_sourcesink = {
.language = 0x0409, /* en-us */
.strings = strings_sourcesink,
};
static struct usb_gadget_strings *sourcesink_strings[] = {
&stringtab_sourcesink,
NULL,
};
/*-------------------------------------------------------------------------*/
static int __init
sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_sourcesink *ss = func_to_ss(f);
int id;
int ret;
/* allocate interface ID(s) */
id = usb_interface_id(c, f);
if (id < 0)
return id;
source_sink_intf_alt0.bInterfaceNumber = id;
source_sink_intf_alt1.bInterfaceNumber = id;
/* allocate bulk endpoints */
ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc);
if (!ss->in_ep) {
autoconf_fail:
ERROR(cdev, "%s: can't autoconfigure on %s\n",
f->name, cdev->gadget->name);
return -ENODEV;
}
ss->in_ep->driver_data = cdev; /* claim */
ss->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_sink_desc);
if (!ss->out_ep)
goto autoconf_fail;
ss->out_ep->driver_data = cdev; /* claim */
/* sanity check the isoc module parameters */
if (isoc_interval < 1)
isoc_interval = 1;
if (isoc_interval > 16)
isoc_interval = 16;
if (isoc_mult > 2)
isoc_mult = 2;
if (isoc_maxburst > 15)
isoc_maxburst = 15;
/* fill in the FS isoc descriptors from the module parameters */
fs_iso_source_desc.wMaxPacketSize = isoc_maxpacket > 1023 ?
1023 : isoc_maxpacket;
fs_iso_source_desc.bInterval = isoc_interval;
fs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket > 1023 ?
1023 : isoc_maxpacket;
fs_iso_sink_desc.bInterval = isoc_interval;
/* allocate iso endpoints */
ss->iso_in_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_source_desc);
if (!ss->iso_in_ep)
goto no_iso;
ss->iso_in_ep->driver_data = cdev; /* claim */
ss->iso_out_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_sink_desc);
if (ss->iso_out_ep) {
ss->iso_out_ep->driver_data = cdev; /* claim */
} else {
ss->iso_in_ep->driver_data = NULL;
ss->iso_in_ep = NULL;
no_iso:
/*
* We still want to work even if the UDC doesn't have isoc
* endpoints, so null out the alt interface that contains
* them and continue.
*/
fs_source_sink_descs[FS_ALT_IFC_1_OFFSET] = NULL;
hs_source_sink_descs[HS_ALT_IFC_1_OFFSET] = NULL;
ss_source_sink_descs[SS_ALT_IFC_1_OFFSET] = NULL;
}
if (isoc_maxpacket > 1024)
isoc_maxpacket = 1024;
/* support high speed hardware */
hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
/*
* Fill in the HS isoc descriptors from the module parameters.
* We assume that the user knows what they are doing and won't
* give parameters that their UDC doesn't support.
*/
hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11;
hs_iso_source_desc.bInterval = isoc_interval;
hs_iso_source_desc.bEndpointAddress =
fs_iso_source_desc.bEndpointAddress;
hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11;
hs_iso_sink_desc.bInterval = isoc_interval;
hs_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
/* support super speed hardware */
ss_source_desc.bEndpointAddress =
fs_source_desc.bEndpointAddress;
ss_sink_desc.bEndpointAddress =
fs_sink_desc.bEndpointAddress;
/*
* Fill in the SS isoc descriptors from the module parameters.
* We assume that the user knows what they are doing and won't
* give parameters that their UDC doesn't support.
*/
ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
ss_iso_source_desc.bInterval = isoc_interval;
ss_iso_source_comp_desc.bmAttributes = isoc_mult;
ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst;
ss_iso_source_comp_desc.wBytesPerInterval =
isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
ss_iso_source_desc.bEndpointAddress =
fs_iso_source_desc.bEndpointAddress;
ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
ss_iso_sink_desc.bInterval = isoc_interval;
ss_iso_sink_comp_desc.bmAttributes = isoc_mult;
ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst;
ss_iso_sink_comp_desc.wBytesPerInterval =
isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, fs_source_sink_descs,
hs_source_sink_descs, ss_source_sink_descs);
if (ret)
return ret;
DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n",
(gadget_is_superspeed(c->cdev->gadget) ? "super" :
(gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
f->name, ss->in_ep->name, ss->out_ep->name,
ss->iso_in_ep ? ss->iso_in_ep->name : "<none>",
ss->iso_out_ep ? ss->iso_out_ep->name : "<none>");
return 0;
}
static void
sourcesink_unbind(struct usb_configuration *c, struct usb_function *f)
{
usb_free_all_descriptors(f);
kfree(func_to_ss(f));
}
/* optionally require specific source/sink data patterns */
static int check_read_data(struct f_sourcesink *ss, struct usb_request *req)
{
unsigned i;
u8 *buf = req->buf;
struct usb_composite_dev *cdev = ss->function.config->cdev;
if (pattern == 2)
return 0;
for (i = 0; i < req->actual; i++, buf++) {
switch (pattern) {
/* all-zeroes has no synchronization issues */
case 0:
if (*buf == 0)
continue;
break;
/* "mod63" stays in sync with short-terminated transfers,
* OR otherwise when host and gadget agree on how large
* each usb transfer request should be. Resync is done
* with set_interface or set_config. (We *WANT* it to
* get quickly out of sync if controllers or their drivers
* stutter for any reason, including buffer duplication...)
*/
case 1:
if (*buf == (u8)(i % 63))
continue;
break;
}
ERROR(cdev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
usb_ep_set_halt(ss->out_ep);
return -EINVAL;
}
return 0;
}
static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
{
unsigned i;
u8 *buf = req->buf;
switch (pattern) {
case 0:
memset(req->buf, 0, req->length);
break;
case 1:
for (i = 0; i < req->length; i++)
*buf++ = (u8) (i % 63);
break;
case 2:
break;
}
}
static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
{
struct usb_composite_dev *cdev;
struct f_sourcesink *ss = ep->driver_data;
int status = req->status;
/* driver_data will be null if ep has been disabled */
if (!ss)
return;
cdev = ss->function.config->cdev;
switch (status) {
case 0: /* normal completion? */
if (ep == ss->out_ep) {
check_read_data(ss, req);
if (pattern != 2)
memset(req->buf, 0x55, req->length);
} else
reinit_write_data(ep, req);
break;
/* this endpoint is normally active while we're configured */
case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
req->actual, req->length);
if (ep == ss->out_ep)
check_read_data(ss, req);
free_ep_req(ep, req);
return;
case -EOVERFLOW: /* buffer overrun on read means that
* we didn't provide a big enough
* buffer.
*/
default:
#if 1
DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
status, req->actual, req->length);
#endif
case -EREMOTEIO: /* short read */
break;
}
status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n",
ep->name, req->length, status);
usb_ep_set_halt(ep);
/* FIXME recover later ... somehow */
}
}
static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
bool is_iso, int speed)
{
struct usb_ep *ep;
struct usb_request *req;
int i, size, status;
for (i = 0; i < 8; i++) {
if (is_iso) {
switch (speed) {
case USB_SPEED_SUPER:
size = isoc_maxpacket * (isoc_mult + 1) *
(isoc_maxburst + 1);
break;
case USB_SPEED_HIGH:
size = isoc_maxpacket * (isoc_mult + 1);
break;
default:
size = isoc_maxpacket > 1023 ?
1023 : isoc_maxpacket;
break;
}
ep = is_in ? ss->iso_in_ep : ss->iso_out_ep;
req = alloc_ep_req(ep, size);
} else {
ep = is_in ? ss->in_ep : ss->out_ep;
req = alloc_ep_req(ep, 0);
}
if (!req)
return -ENOMEM;
req->complete = source_sink_complete;
if (is_in)
reinit_write_data(ep, req);
else if (pattern != 2)
memset(req->buf, 0x55, req->length);
status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
struct usb_composite_dev *cdev;
cdev = ss->function.config->cdev;
ERROR(cdev, "start %s%s %s --> %d\n",
is_iso ? "ISO-" : "", is_in ? "IN" : "OUT",
ep->name, status);
free_ep_req(ep, req);
}
if (!is_iso)
break;
}
return status;
}
static void disable_source_sink(struct f_sourcesink *ss)
{
struct usb_composite_dev *cdev;
cdev = ss->function.config->cdev;
disable_endpoints(cdev, ss->in_ep, ss->out_ep, ss->iso_in_ep,
ss->iso_out_ep);
VDBG(cdev, "%s disabled\n", ss->function.name);
}
static int
enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss,
int alt)
{
int result = 0;
int speed = cdev->gadget->speed;
struct usb_ep *ep;
/* one bulk endpoint writes (sources) zeroes IN (to the host) */
ep = ss->in_ep;
result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
if (result)
return result;
result = usb_ep_enable(ep);
if (result < 0)
return result;
ep->driver_data = ss;
result = source_sink_start_ep(ss, true, false, speed);
if (result < 0) {
fail:
ep = ss->in_ep;
usb_ep_disable(ep);
ep->driver_data = NULL;
return result;
}
/* one bulk endpoint reads (sinks) anything OUT (from the host) */
ep = ss->out_ep;
result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
if (result)
goto fail;
result = usb_ep_enable(ep);
if (result < 0)
goto fail;
ep->driver_data = ss;
result = source_sink_start_ep(ss, false, false, speed);
if (result < 0) {
fail2:
ep = ss->out_ep;
usb_ep_disable(ep);
ep->driver_data = NULL;
goto fail;
}
if (alt == 0)
goto out;
/* one iso endpoint writes (sources) zeroes IN (to the host) */
ep = ss->iso_in_ep;
if (ep) {
result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
if (result)
goto fail2;
result = usb_ep_enable(ep);
if (result < 0)
goto fail2;
ep->driver_data = ss;
result = source_sink_start_ep(ss, true, true, speed);
if (result < 0) {
fail3:
ep = ss->iso_in_ep;
if (ep) {
usb_ep_disable(ep);
ep->driver_data = NULL;
}
goto fail2;
}
}
/* one iso endpoint reads (sinks) anything OUT (from the host) */
ep = ss->iso_out_ep;
if (ep) {
result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
if (result)
goto fail3;
result = usb_ep_enable(ep);
if (result < 0)
goto fail3;
ep->driver_data = ss;
result = source_sink_start_ep(ss, false, true, speed);
if (result < 0) {
usb_ep_disable(ep);
ep->driver_data = NULL;
goto fail3;
}
}
out:
ss->cur_alt = alt;
DBG(cdev, "%s enabled, alt intf %d\n", ss->function.name, alt);
return result;
}
static int sourcesink_set_alt(struct usb_function *f,
unsigned intf, unsigned alt)
{
struct f_sourcesink *ss = func_to_ss(f);
struct usb_composite_dev *cdev = f->config->cdev;
if (ss->in_ep->driver_data)
disable_source_sink(ss);
return enable_source_sink(cdev, ss, alt);
}
static int sourcesink_get_alt(struct usb_function *f, unsigned intf)
{
struct f_sourcesink *ss = func_to_ss(f);
return ss->cur_alt;
}
static void sourcesink_disable(struct usb_function *f)
{
struct f_sourcesink *ss = func_to_ss(f);
disable_source_sink(ss);
}
/*-------------------------------------------------------------------------*/
static int __init sourcesink_bind_config(struct usb_configuration *c)
{
struct f_sourcesink *ss;
int status;
ss = kzalloc(sizeof *ss, GFP_KERNEL);
if (!ss)
return -ENOMEM;
ss->function.name = "source/sink";
ss->function.bind = sourcesink_bind;
ss->function.unbind = sourcesink_unbind;
ss->function.set_alt = sourcesink_set_alt;
ss->function.get_alt = sourcesink_get_alt;
ss->function.disable = sourcesink_disable;
status = usb_add_function(c, &ss->function);
if (status)
kfree(ss);
return status;
}
static int sourcesink_setup(struct usb_configuration *c,
const struct usb_ctrlrequest *ctrl)
{
struct usb_request *req = c->cdev->req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
req->length = USB_COMP_EP0_BUFSIZ;
/* composite driver infrastructure handles everything except
* the two control test requests.
*/
switch (ctrl->bRequest) {
/*
* These are the same vendor-specific requests supported by
* Intel's USB 2.0 compliance test devices. We exceed that
* device spec by allowing multiple-packet requests.
*
* NOTE: the Control-OUT data stays in req->buf ... better
* would be copying it into a scratch buffer, so that other
* requests may safely intervene.
*/
case 0x5b: /* control WRITE test -- fill the buffer */
if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
goto unknown;
if (w_value || w_index)
break;
/* just read that many bytes into the buffer */
if (w_length > req->length)
break;
value = w_length;
break;
case 0x5c: /* control READ test -- return the buffer */
if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
goto unknown;
if (w_value || w_index)
break;
/* expect those bytes are still in the buffer; send back */
if (w_length > req->length)
break;
value = w_length;
break;
default:
unknown:
VDBG(c->cdev,
"unknown control req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
}
/* respond with data transfer or status phase? */
if (value >= 0) {
VDBG(c->cdev, "source/sink req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
req->zero = 0;
req->length = value;
value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC);
if (value < 0)
ERROR(c->cdev, "source/sink response, err %d\n",
value);
}
/* device either stalls (value < 0) or reports success */
return value;
}
static struct usb_configuration sourcesink_driver = {
.label = "source/sink",
.strings = sourcesink_strings,
.setup = sourcesink_setup,
.bConfigurationValue = 3,
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
/* .iConfiguration = DYNAMIC */
};
/**
* sourcesink_add - add a source/sink testing configuration to a device
* @cdev: the device to support the configuration
*/
int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume)
{
int id;
/* allocate string ID(s) */
id = usb_string_id(cdev);
if (id < 0)
return id;
strings_sourcesink[0].id = id;
source_sink_intf_alt0.iInterface = id;
source_sink_intf_alt1.iInterface = id;
sourcesink_driver.iConfiguration = id;
/* support autoresume for remote wakeup testing */
if (autoresume)
sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
/* support OTG systems */
if (gadget_is_otg(cdev->gadget)) {
sourcesink_driver.descriptors = otg_desc;
sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
return usb_add_config(cdev, &sourcesink_driver, sourcesink_bind_config);
}