mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 01:36:41 +07:00
d05c26ce69
Updating the version and the year of updated files Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
4907 lines
135 KiB
C
4907 lines
135 KiB
C
/* Copyright 2008-2009 Broadcom Corporation
|
|
*
|
|
* Unless you and Broadcom execute a separate written software license
|
|
* agreement governing use of this software, this software is licensed to you
|
|
* under the terms of the GNU General Public License version 2, available
|
|
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
|
|
*
|
|
* Notwithstanding the above, under no circumstances may you combine this
|
|
* software in any way with any other Broadcom software provided under a
|
|
* license other than the GPL, without Broadcom's express prior written
|
|
* consent.
|
|
*
|
|
* Written by Yaniv Rosner
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include "bnx2x_reg.h"
|
|
#include "bnx2x_fw_defs.h"
|
|
#include "bnx2x_hsi.h"
|
|
#include "bnx2x_link.h"
|
|
#include "bnx2x.h"
|
|
|
|
/********************************************************/
|
|
#define SUPPORT_CL73 0 /* Currently no */
|
|
#define ETH_HLEN 14
|
|
#define ETH_OVREHEAD (ETH_HLEN + 8)/* 8 for CRC + VLAN*/
|
|
#define ETH_MIN_PACKET_SIZE 60
|
|
#define ETH_MAX_PACKET_SIZE 1500
|
|
#define ETH_MAX_JUMBO_PACKET_SIZE 9600
|
|
#define MDIO_ACCESS_TIMEOUT 1000
|
|
#define BMAC_CONTROL_RX_ENABLE 2
|
|
|
|
/***********************************************************/
|
|
/* Shortcut definitions */
|
|
/***********************************************************/
|
|
|
|
#define NIG_STATUS_XGXS0_LINK10G \
|
|
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
|
|
#define NIG_STATUS_XGXS0_LINK_STATUS \
|
|
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
|
|
#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
|
|
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
|
|
#define NIG_STATUS_SERDES0_LINK_STATUS \
|
|
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
|
|
#define NIG_MASK_MI_INT \
|
|
NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
|
|
#define NIG_MASK_XGXS0_LINK10G \
|
|
NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G
|
|
#define NIG_MASK_XGXS0_LINK_STATUS \
|
|
NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS
|
|
#define NIG_MASK_SERDES0_LINK_STATUS \
|
|
NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS
|
|
|
|
#define MDIO_AN_CL73_OR_37_COMPLETE \
|
|
(MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE)
|
|
|
|
#define XGXS_RESET_BITS \
|
|
(MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW | \
|
|
MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ | \
|
|
MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN | \
|
|
MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \
|
|
MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB)
|
|
|
|
#define SERDES_RESET_BITS \
|
|
(MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \
|
|
MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ | \
|
|
MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN | \
|
|
MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD)
|
|
|
|
#define AUTONEG_CL37 SHARED_HW_CFG_AN_ENABLE_CL37
|
|
#define AUTONEG_CL73 SHARED_HW_CFG_AN_ENABLE_CL73
|
|
#define AUTONEG_BAM SHARED_HW_CFG_AN_ENABLE_BAM
|
|
#define AUTONEG_PARALLEL \
|
|
SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
|
|
#define AUTONEG_SGMII_FIBER_AUTODET \
|
|
SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
|
|
#define AUTONEG_REMOTE_PHY SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
|
|
|
|
#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
|
|
#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE
|
|
#define GP_STATUS_SPEED_MASK \
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK
|
|
#define GP_STATUS_10M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M
|
|
#define GP_STATUS_100M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M
|
|
#define GP_STATUS_1G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G
|
|
#define GP_STATUS_2_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G
|
|
#define GP_STATUS_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G
|
|
#define GP_STATUS_6G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G
|
|
#define GP_STATUS_10G_HIG \
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG
|
|
#define GP_STATUS_10G_CX4 \
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4
|
|
#define GP_STATUS_12G_HIG \
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG
|
|
#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G
|
|
#define GP_STATUS_13G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G
|
|
#define GP_STATUS_15G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G
|
|
#define GP_STATUS_16G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G
|
|
#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX
|
|
#define GP_STATUS_10G_KX4 \
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4
|
|
|
|
#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD
|
|
#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD
|
|
#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD
|
|
#define LINK_100T4 LINK_STATUS_SPEED_AND_DUPLEX_100T4
|
|
#define LINK_100TXFD LINK_STATUS_SPEED_AND_DUPLEX_100TXFD
|
|
#define LINK_1000THD LINK_STATUS_SPEED_AND_DUPLEX_1000THD
|
|
#define LINK_1000TFD LINK_STATUS_SPEED_AND_DUPLEX_1000TFD
|
|
#define LINK_1000XFD LINK_STATUS_SPEED_AND_DUPLEX_1000XFD
|
|
#define LINK_2500THD LINK_STATUS_SPEED_AND_DUPLEX_2500THD
|
|
#define LINK_2500TFD LINK_STATUS_SPEED_AND_DUPLEX_2500TFD
|
|
#define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD
|
|
#define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
|
|
#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD
|
|
#define LINK_12GTFD LINK_STATUS_SPEED_AND_DUPLEX_12GTFD
|
|
#define LINK_12GXFD LINK_STATUS_SPEED_AND_DUPLEX_12GXFD
|
|
#define LINK_12_5GTFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD
|
|
#define LINK_12_5GXFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD
|
|
#define LINK_13GTFD LINK_STATUS_SPEED_AND_DUPLEX_13GTFD
|
|
#define LINK_13GXFD LINK_STATUS_SPEED_AND_DUPLEX_13GXFD
|
|
#define LINK_15GTFD LINK_STATUS_SPEED_AND_DUPLEX_15GTFD
|
|
#define LINK_15GXFD LINK_STATUS_SPEED_AND_DUPLEX_15GXFD
|
|
#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
|
|
#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
|
|
|
|
#define PHY_XGXS_FLAG 0x1
|
|
#define PHY_SGMII_FLAG 0x2
|
|
#define PHY_SERDES_FLAG 0x4
|
|
|
|
/**********************************************************/
|
|
/* INTERFACE */
|
|
/**********************************************************/
|
|
#define CL45_WR_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \
|
|
bnx2x_cl45_write(_bp, _port, 0, _phy_addr, \
|
|
DEFAULT_PHY_DEV_ADDR, \
|
|
(_bank + (_addr & 0xf)), \
|
|
_val)
|
|
|
|
#define CL45_RD_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \
|
|
bnx2x_cl45_read(_bp, _port, 0, _phy_addr, \
|
|
DEFAULT_PHY_DEV_ADDR, \
|
|
(_bank + (_addr & 0xf)), \
|
|
_val)
|
|
|
|
static void bnx2x_set_phy_mdio(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST +
|
|
params->port*0x18, 0);
|
|
REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
|
|
DEFAULT_PHY_DEV_ADDR);
|
|
}
|
|
|
|
static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits)
|
|
{
|
|
u32 val = REG_RD(bp, reg);
|
|
|
|
val |= bits;
|
|
REG_WR(bp, reg, val);
|
|
return val;
|
|
}
|
|
|
|
static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
|
|
{
|
|
u32 val = REG_RD(bp, reg);
|
|
|
|
val &= ~bits;
|
|
REG_WR(bp, reg, val);
|
|
return val;
|
|
}
|
|
|
|
static void bnx2x_emac_init(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
/* reset and unreset the emac core */
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
|
|
u32 val;
|
|
u16 timeout;
|
|
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
(MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
|
|
udelay(5);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
|
|
(MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
|
|
|
|
/* init emac - use read-modify-write */
|
|
/* self clear reset */
|
|
val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
|
|
EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
|
|
|
|
timeout = 200;
|
|
do {
|
|
val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
|
|
DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
|
|
if (!timeout) {
|
|
DP(NETIF_MSG_LINK, "EMAC timeout!\n");
|
|
return;
|
|
}
|
|
timeout--;
|
|
} while (val & EMAC_MODE_RESET);
|
|
|
|
/* Set mac address */
|
|
val = ((params->mac_addr[0] << 8) |
|
|
params->mac_addr[1]);
|
|
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val);
|
|
|
|
val = ((params->mac_addr[2] << 24) |
|
|
(params->mac_addr[3] << 16) |
|
|
(params->mac_addr[4] << 8) |
|
|
params->mac_addr[5]);
|
|
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
|
|
}
|
|
|
|
static u8 bnx2x_emac_enable(struct link_params *params,
|
|
struct link_vars *vars, u8 lb)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
|
|
u32 val;
|
|
|
|
DP(NETIF_MSG_LINK, "enabling EMAC\n");
|
|
|
|
/* enable emac and not bmac */
|
|
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
|
|
|
|
/* for paladium */
|
|
if (CHIP_REV_IS_EMUL(bp)) {
|
|
/* Use lane 1 (of lanes 0-3) */
|
|
REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
|
|
REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
|
|
port*4, 1);
|
|
}
|
|
/* for fpga */
|
|
else
|
|
|
|
if (CHIP_REV_IS_FPGA(bp)) {
|
|
/* Use lane 1 (of lanes 0-3) */
|
|
DP(NETIF_MSG_LINK, "bnx2x_emac_enable: Setting FPGA\n");
|
|
|
|
REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
|
|
REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4,
|
|
0);
|
|
} else
|
|
/* ASIC */
|
|
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
|
u32 ser_lane = ((params->lane_config &
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
|
|
|
|
DP(NETIF_MSG_LINK, "XGXS\n");
|
|
/* select the master lanes (out of 0-3) */
|
|
REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 +
|
|
port*4, ser_lane);
|
|
/* select XGXS */
|
|
REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
|
|
port*4, 1);
|
|
|
|
} else { /* SerDes */
|
|
DP(NETIF_MSG_LINK, "SerDes\n");
|
|
/* select SerDes */
|
|
REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
|
|
port*4, 0);
|
|
}
|
|
|
|
/* enable emac */
|
|
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
|
|
|
|
if (CHIP_REV_IS_SLOW(bp)) {
|
|
/* config GMII mode */
|
|
val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
|
|
EMAC_WR(bp, EMAC_REG_EMAC_MODE,
|
|
(val | EMAC_MODE_PORT_GMII));
|
|
} else { /* ASIC */
|
|
/* pause enable/disable */
|
|
bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
|
|
EMAC_RX_MODE_FLOW_EN);
|
|
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
|
|
bnx2x_bits_en(bp, emac_base +
|
|
EMAC_REG_EMAC_RX_MODE,
|
|
EMAC_RX_MODE_FLOW_EN);
|
|
|
|
bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
|
|
(EMAC_TX_MODE_EXT_PAUSE_EN |
|
|
EMAC_TX_MODE_FLOW_EN));
|
|
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
|
|
bnx2x_bits_en(bp, emac_base +
|
|
EMAC_REG_EMAC_TX_MODE,
|
|
(EMAC_TX_MODE_EXT_PAUSE_EN |
|
|
EMAC_TX_MODE_FLOW_EN));
|
|
}
|
|
|
|
/* KEEP_VLAN_TAG, promiscuous */
|
|
val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
|
|
val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
|
|
EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
|
|
|
|
/* Set Loopback */
|
|
val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
|
|
if (lb)
|
|
val |= 0x810;
|
|
else
|
|
val &= ~0x810;
|
|
EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
|
|
|
|
/* enable emac */
|
|
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
|
|
|
|
/* enable emac for jumbo packets */
|
|
EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
|
|
(EMAC_RX_MTU_SIZE_JUMBO_ENA |
|
|
(ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)));
|
|
|
|
/* strip CRC */
|
|
REG_WR(bp, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1);
|
|
|
|
/* disable the NIG in/out to the bmac */
|
|
REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x0);
|
|
REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0);
|
|
REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x0);
|
|
|
|
/* enable the NIG in/out to the emac */
|
|
REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1);
|
|
val = 0;
|
|
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
|
|
val = 1;
|
|
|
|
REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
|
|
REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1);
|
|
|
|
if (CHIP_REV_IS_EMUL(bp)) {
|
|
/* take the BigMac out of reset */
|
|
REG_WR(bp,
|
|
GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
|
|
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
|
|
|
|
/* enable access for bmac registers */
|
|
REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
|
|
}
|
|
|
|
vars->mac_type = MAC_TYPE_EMAC;
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
|
|
u8 is_lb)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
|
|
NIG_REG_INGRESS_BMAC0_MEM;
|
|
u32 wb_data[2];
|
|
u32 val;
|
|
|
|
DP(NETIF_MSG_LINK, "Enabling BigMAC\n");
|
|
/* reset and unreset the BigMac */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
|
|
msleep(1);
|
|
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
|
|
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
|
|
|
|
/* enable access for bmac registers */
|
|
REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
|
|
|
|
/* XGXS control */
|
|
wb_data[0] = 0x3c;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp, bmac_addr +
|
|
BIGMAC_REGISTER_BMAC_XGXS_CONTROL,
|
|
wb_data, 2);
|
|
|
|
/* tx MAC SA */
|
|
wb_data[0] = ((params->mac_addr[2] << 24) |
|
|
(params->mac_addr[3] << 16) |
|
|
(params->mac_addr[4] << 8) |
|
|
params->mac_addr[5]);
|
|
wb_data[1] = ((params->mac_addr[0] << 8) |
|
|
params->mac_addr[1]);
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR,
|
|
wb_data, 2);
|
|
|
|
/* tx control */
|
|
val = 0xc0;
|
|
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
|
|
val |= 0x800000;
|
|
wb_data[0] = val;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL,
|
|
wb_data, 2);
|
|
|
|
/* mac control */
|
|
val = 0x3;
|
|
if (is_lb) {
|
|
val |= 0x4;
|
|
DP(NETIF_MSG_LINK, "enable bmac loopback\n");
|
|
}
|
|
wb_data[0] = val;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
|
|
wb_data, 2);
|
|
|
|
|
|
/* set rx mtu */
|
|
wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE,
|
|
wb_data, 2);
|
|
|
|
/* rx control set to don't strip crc */
|
|
val = 0x14;
|
|
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
|
|
val |= 0x20;
|
|
wb_data[0] = val;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL,
|
|
wb_data, 2);
|
|
|
|
/* set tx mtu */
|
|
wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE,
|
|
wb_data, 2);
|
|
|
|
/* set cnt max size */
|
|
wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE,
|
|
wb_data, 2);
|
|
|
|
/* configure safc */
|
|
wb_data[0] = 0x1000200;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
|
|
wb_data, 2);
|
|
/* fix for emulation */
|
|
if (CHIP_REV_IS_EMUL(bp)) {
|
|
wb_data[0] = 0xf000;
|
|
wb_data[1] = 0;
|
|
REG_WR_DMAE(bp,
|
|
bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
|
|
wb_data, 2);
|
|
}
|
|
|
|
REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1);
|
|
REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
|
|
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
|
|
val = 0;
|
|
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
|
|
val = 1;
|
|
REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
|
|
REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
|
|
REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x0);
|
|
REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0);
|
|
REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x1);
|
|
REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x1);
|
|
|
|
vars->mac_type = MAC_TYPE_BMAC;
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_phy_deassert(struct link_params *params, u8 phy_flags)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u32 val;
|
|
|
|
if (phy_flags & PHY_XGXS_FLAG) {
|
|
DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:XGXS\n");
|
|
val = XGXS_RESET_BITS;
|
|
|
|
} else { /* SerDes */
|
|
DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:SerDes\n");
|
|
val = SERDES_RESET_BITS;
|
|
}
|
|
|
|
val = val << (params->port*16);
|
|
|
|
/* reset and unreset the SerDes/XGXS */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
|
|
val);
|
|
udelay(500);
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET,
|
|
val);
|
|
bnx2x_set_phy_mdio(params);
|
|
}
|
|
|
|
void bnx2x_link_status_update(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 link_10g;
|
|
u8 port = params->port;
|
|
|
|
if (params->switch_cfg == SWITCH_CFG_1G)
|
|
vars->phy_flags = PHY_SERDES_FLAG;
|
|
else
|
|
vars->phy_flags = PHY_XGXS_FLAG;
|
|
vars->link_status = REG_RD(bp, params->shmem_base +
|
|
offsetof(struct shmem_region,
|
|
port_mb[port].link_status));
|
|
|
|
vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
|
|
|
|
if (vars->link_up) {
|
|
DP(NETIF_MSG_LINK, "phy link up\n");
|
|
|
|
vars->phy_link_up = 1;
|
|
vars->duplex = DUPLEX_FULL;
|
|
switch (vars->link_status &
|
|
LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
|
|
case LINK_10THD:
|
|
vars->duplex = DUPLEX_HALF;
|
|
/* fall thru */
|
|
case LINK_10TFD:
|
|
vars->line_speed = SPEED_10;
|
|
break;
|
|
|
|
case LINK_100TXHD:
|
|
vars->duplex = DUPLEX_HALF;
|
|
/* fall thru */
|
|
case LINK_100T4:
|
|
case LINK_100TXFD:
|
|
vars->line_speed = SPEED_100;
|
|
break;
|
|
|
|
case LINK_1000THD:
|
|
vars->duplex = DUPLEX_HALF;
|
|
/* fall thru */
|
|
case LINK_1000TFD:
|
|
vars->line_speed = SPEED_1000;
|
|
break;
|
|
|
|
case LINK_2500THD:
|
|
vars->duplex = DUPLEX_HALF;
|
|
/* fall thru */
|
|
case LINK_2500TFD:
|
|
vars->line_speed = SPEED_2500;
|
|
break;
|
|
|
|
case LINK_10GTFD:
|
|
vars->line_speed = SPEED_10000;
|
|
break;
|
|
|
|
case LINK_12GTFD:
|
|
vars->line_speed = SPEED_12000;
|
|
break;
|
|
|
|
case LINK_12_5GTFD:
|
|
vars->line_speed = SPEED_12500;
|
|
break;
|
|
|
|
case LINK_13GTFD:
|
|
vars->line_speed = SPEED_13000;
|
|
break;
|
|
|
|
case LINK_15GTFD:
|
|
vars->line_speed = SPEED_15000;
|
|
break;
|
|
|
|
case LINK_16GTFD:
|
|
vars->line_speed = SPEED_16000;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED)
|
|
vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX;
|
|
else
|
|
vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX;
|
|
|
|
if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED)
|
|
vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX;
|
|
else
|
|
vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX;
|
|
|
|
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
|
if (vars->line_speed &&
|
|
((vars->line_speed == SPEED_10) ||
|
|
(vars->line_speed == SPEED_100))) {
|
|
vars->phy_flags |= PHY_SGMII_FLAG;
|
|
} else {
|
|
vars->phy_flags &= ~PHY_SGMII_FLAG;
|
|
}
|
|
}
|
|
|
|
/* anything 10 and over uses the bmac */
|
|
link_10g = ((vars->line_speed == SPEED_10000) ||
|
|
(vars->line_speed == SPEED_12000) ||
|
|
(vars->line_speed == SPEED_12500) ||
|
|
(vars->line_speed == SPEED_13000) ||
|
|
(vars->line_speed == SPEED_15000) ||
|
|
(vars->line_speed == SPEED_16000));
|
|
if (link_10g)
|
|
vars->mac_type = MAC_TYPE_BMAC;
|
|
else
|
|
vars->mac_type = MAC_TYPE_EMAC;
|
|
|
|
} else { /* link down */
|
|
DP(NETIF_MSG_LINK, "phy link down\n");
|
|
|
|
vars->phy_link_up = 0;
|
|
|
|
vars->line_speed = 0;
|
|
vars->duplex = DUPLEX_FULL;
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
|
|
/* indicate no mac active */
|
|
vars->mac_type = MAC_TYPE_NONE;
|
|
}
|
|
|
|
DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x\n",
|
|
vars->link_status, vars->phy_link_up);
|
|
DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n",
|
|
vars->line_speed, vars->duplex, vars->flow_ctrl);
|
|
}
|
|
|
|
static void bnx2x_update_mng(struct link_params *params, u32 link_status)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
REG_WR(bp, params->shmem_base +
|
|
offsetof(struct shmem_region,
|
|
port_mb[params->port].link_status),
|
|
link_status);
|
|
}
|
|
|
|
static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port)
|
|
{
|
|
u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
|
|
NIG_REG_INGRESS_BMAC0_MEM;
|
|
u32 wb_data[2];
|
|
u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
|
|
|
|
/* Only if the bmac is out of reset */
|
|
if (REG_RD(bp, MISC_REG_RESET_REG_2) &
|
|
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) &&
|
|
nig_bmac_enable) {
|
|
|
|
/* Clear Rx Enable bit in BMAC_CONTROL register */
|
|
REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
|
|
wb_data, 2);
|
|
wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
|
|
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
|
|
wb_data, 2);
|
|
|
|
msleep(1);
|
|
}
|
|
}
|
|
|
|
static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
|
|
u32 line_speed)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u32 init_crd, crd;
|
|
u32 count = 1000;
|
|
|
|
/* disable port */
|
|
REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
|
|
|
|
/* wait for init credit */
|
|
init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4);
|
|
crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
|
|
DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd);
|
|
|
|
while ((init_crd != crd) && count) {
|
|
msleep(5);
|
|
|
|
crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
|
|
count--;
|
|
}
|
|
crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
|
|
if (init_crd != crd) {
|
|
DP(NETIF_MSG_LINK, "BUG! init_crd 0x%x != crd 0x%x\n",
|
|
init_crd, crd);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (flow_ctrl & BNX2X_FLOW_CTRL_RX ||
|
|
line_speed == SPEED_10 ||
|
|
line_speed == SPEED_100 ||
|
|
line_speed == SPEED_1000 ||
|
|
line_speed == SPEED_2500) {
|
|
REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1);
|
|
/* update threshold */
|
|
REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
|
|
/* update init credit */
|
|
init_crd = 778; /* (800-18-4) */
|
|
|
|
} else {
|
|
u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE +
|
|
ETH_OVREHEAD)/16;
|
|
REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
|
|
/* update threshold */
|
|
REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
|
|
/* update init credit */
|
|
switch (line_speed) {
|
|
case SPEED_10000:
|
|
init_crd = thresh + 553 - 22;
|
|
break;
|
|
|
|
case SPEED_12000:
|
|
init_crd = thresh + 664 - 22;
|
|
break;
|
|
|
|
case SPEED_13000:
|
|
init_crd = thresh + 742 - 22;
|
|
break;
|
|
|
|
case SPEED_16000:
|
|
init_crd = thresh + 778 - 22;
|
|
break;
|
|
default:
|
|
DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
|
|
line_speed);
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd);
|
|
DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n",
|
|
line_speed, init_crd);
|
|
|
|
/* probe the credit changes */
|
|
REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1);
|
|
msleep(5);
|
|
REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0);
|
|
|
|
/* enable port */
|
|
REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0);
|
|
return 0;
|
|
}
|
|
|
|
static u32 bnx2x_get_emac_base(u32 ext_phy_type, u8 port)
|
|
{
|
|
u32 emac_base;
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
emac_base = GRCBASE_EMAC0;
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
|
|
break;
|
|
default:
|
|
emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
|
|
break;
|
|
}
|
|
return emac_base;
|
|
|
|
}
|
|
|
|
u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
|
|
u8 phy_addr, u8 devad, u16 reg, u16 val)
|
|
{
|
|
u32 tmp, saved_mode;
|
|
u8 i, rc = 0;
|
|
u32 mdio_ctrl = bnx2x_get_emac_base(ext_phy_type, port);
|
|
|
|
/* set clause 45 mode, slow down the MDIO clock to 2.5MHz
|
|
* (a value of 49==0x31) and make sure that the AUTO poll is off
|
|
*/
|
|
saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
|
|
tmp = saved_mode & ~(EMAC_MDIO_MODE_AUTO_POLL |
|
|
EMAC_MDIO_MODE_CLOCK_CNT);
|
|
tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
|
|
(49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
|
|
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
|
|
REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
|
|
udelay(40);
|
|
|
|
/* address */
|
|
|
|
tmp = ((phy_addr << 21) | (devad << 16) | reg |
|
|
EMAC_MDIO_COMM_COMMAND_ADDRESS |
|
|
EMAC_MDIO_COMM_START_BUSY);
|
|
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
|
|
|
|
for (i = 0; i < 50; i++) {
|
|
udelay(10);
|
|
|
|
tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
|
|
if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
|
|
udelay(5);
|
|
break;
|
|
}
|
|
}
|
|
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
|
|
DP(NETIF_MSG_LINK, "write phy register failed\n");
|
|
rc = -EFAULT;
|
|
} else {
|
|
/* data */
|
|
tmp = ((phy_addr << 21) | (devad << 16) | val |
|
|
EMAC_MDIO_COMM_COMMAND_WRITE_45 |
|
|
EMAC_MDIO_COMM_START_BUSY);
|
|
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
|
|
|
|
for (i = 0; i < 50; i++) {
|
|
udelay(10);
|
|
|
|
tmp = REG_RD(bp, mdio_ctrl +
|
|
EMAC_REG_EMAC_MDIO_COMM);
|
|
if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
|
|
udelay(5);
|
|
break;
|
|
}
|
|
}
|
|
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
|
|
DP(NETIF_MSG_LINK, "write phy register failed\n");
|
|
rc = -EFAULT;
|
|
}
|
|
}
|
|
|
|
/* Restore the saved mode */
|
|
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode);
|
|
|
|
return rc;
|
|
}
|
|
|
|
u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type,
|
|
u8 phy_addr, u8 devad, u16 reg, u16 *ret_val)
|
|
{
|
|
u32 val, saved_mode;
|
|
u16 i;
|
|
u8 rc = 0;
|
|
|
|
u32 mdio_ctrl = bnx2x_get_emac_base(ext_phy_type, port);
|
|
/* set clause 45 mode, slow down the MDIO clock to 2.5MHz
|
|
* (a value of 49==0x31) and make sure that the AUTO poll is off
|
|
*/
|
|
saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
|
|
val = saved_mode & ((EMAC_MDIO_MODE_AUTO_POLL |
|
|
EMAC_MDIO_MODE_CLOCK_CNT));
|
|
val |= (EMAC_MDIO_MODE_CLAUSE_45 |
|
|
(49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
|
|
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
|
|
REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
|
|
udelay(40);
|
|
|
|
/* address */
|
|
val = ((phy_addr << 21) | (devad << 16) | reg |
|
|
EMAC_MDIO_COMM_COMMAND_ADDRESS |
|
|
EMAC_MDIO_COMM_START_BUSY);
|
|
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
|
|
|
|
for (i = 0; i < 50; i++) {
|
|
udelay(10);
|
|
|
|
val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
|
|
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
|
|
udelay(5);
|
|
break;
|
|
}
|
|
}
|
|
if (val & EMAC_MDIO_COMM_START_BUSY) {
|
|
DP(NETIF_MSG_LINK, "read phy register failed\n");
|
|
|
|
*ret_val = 0;
|
|
rc = -EFAULT;
|
|
|
|
} else {
|
|
/* data */
|
|
val = ((phy_addr << 21) | (devad << 16) |
|
|
EMAC_MDIO_COMM_COMMAND_READ_45 |
|
|
EMAC_MDIO_COMM_START_BUSY);
|
|
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
|
|
|
|
for (i = 0; i < 50; i++) {
|
|
udelay(10);
|
|
|
|
val = REG_RD(bp, mdio_ctrl +
|
|
EMAC_REG_EMAC_MDIO_COMM);
|
|
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
|
|
*ret_val = (u16)(val & EMAC_MDIO_COMM_DATA);
|
|
break;
|
|
}
|
|
}
|
|
if (val & EMAC_MDIO_COMM_START_BUSY) {
|
|
DP(NETIF_MSG_LINK, "read phy register failed\n");
|
|
|
|
*ret_val = 0;
|
|
rc = -EFAULT;
|
|
}
|
|
}
|
|
|
|
/* Restore the saved mode */
|
|
REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_set_aer_mmd(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u32 ser_lane;
|
|
u16 offset;
|
|
|
|
ser_lane = ((params->lane_config &
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
|
|
|
|
offset = (vars->phy_flags & PHY_XGXS_FLAG) ?
|
|
(params->phy_addr + ser_lane) : 0;
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_AER_BLOCK,
|
|
MDIO_AER_BLOCK_AER_REG, 0x3800 + offset);
|
|
}
|
|
|
|
static void bnx2x_set_master_ln(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 new_master_ln, ser_lane;
|
|
ser_lane = ((params->lane_config &
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
|
|
|
|
/* set the master_ln for AN */
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_XGXS_BLOCK2,
|
|
MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
|
|
&new_master_ln);
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_XGXS_BLOCK2 ,
|
|
MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
|
|
(new_master_ln | ser_lane));
|
|
}
|
|
|
|
static u8 bnx2x_reset_unicore(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 mii_control;
|
|
u16 i;
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
|
|
|
|
/* reset the unicore */
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL,
|
|
(mii_control |
|
|
MDIO_COMBO_IEEO_MII_CONTROL_RESET));
|
|
|
|
/* wait for the reset to self clear */
|
|
for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) {
|
|
udelay(5);
|
|
|
|
/* the reset erased the previous bank value */
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL,
|
|
&mii_control);
|
|
|
|
if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) {
|
|
udelay(5);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n");
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
static void bnx2x_set_swap_lanes(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
/* Each two bits represents a lane number:
|
|
No swap is 0123 => 0x1b no need to enable the swap */
|
|
u16 ser_lane, rx_lane_swap, tx_lane_swap;
|
|
|
|
ser_lane = ((params->lane_config &
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
|
|
rx_lane_swap = ((params->lane_config &
|
|
PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >>
|
|
PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT);
|
|
tx_lane_swap = ((params->lane_config &
|
|
PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >>
|
|
PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT);
|
|
|
|
if (rx_lane_swap != 0x1b) {
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_XGXS_BLOCK2,
|
|
MDIO_XGXS_BLOCK2_RX_LN_SWAP,
|
|
(rx_lane_swap |
|
|
MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE |
|
|
MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE));
|
|
} else {
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_XGXS_BLOCK2,
|
|
MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0);
|
|
}
|
|
|
|
if (tx_lane_swap != 0x1b) {
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_XGXS_BLOCK2,
|
|
MDIO_XGXS_BLOCK2_TX_LN_SWAP,
|
|
(tx_lane_swap |
|
|
MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE));
|
|
} else {
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_XGXS_BLOCK2,
|
|
MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_set_parallel_detection(struct link_params *params,
|
|
u8 phy_flags)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 control2;
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_SERDES_DIGITAL,
|
|
MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
|
|
&control2);
|
|
|
|
|
|
control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
|
|
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_SERDES_DIGITAL,
|
|
MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
|
|
control2);
|
|
|
|
if (phy_flags & PHY_XGXS_FLAG) {
|
|
DP(NETIF_MSG_LINK, "XGXS\n");
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_10G_PARALLEL_DETECT,
|
|
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
|
|
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_10G_PARALLEL_DETECT,
|
|
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
|
|
&control2);
|
|
|
|
|
|
control2 |=
|
|
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_10G_PARALLEL_DETECT,
|
|
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
|
|
control2);
|
|
|
|
/* Disable parallel detection of HiG */
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_XGXS_BLOCK2,
|
|
MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
|
|
MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
|
|
MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_set_autoneg(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 reg_val;
|
|
|
|
/* CL37 Autoneg */
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL, ®_val);
|
|
|
|
/* CL37 Autoneg Enabled */
|
|
if (vars->line_speed == SPEED_AUTO_NEG)
|
|
reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
|
|
else /* CL37 Autoneg Disabled */
|
|
reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
|
|
MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN);
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
|
|
|
|
/* Enable/Disable Autodetection */
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_SERDES_DIGITAL,
|
|
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, ®_val);
|
|
reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
|
|
if (vars->line_speed == SPEED_AUTO_NEG)
|
|
reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
|
|
else
|
|
reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_SERDES_DIGITAL,
|
|
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val);
|
|
|
|
/* Enable TetonII and BAM autoneg */
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_BAM_NEXT_PAGE,
|
|
MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
|
|
®_val);
|
|
if (vars->line_speed == SPEED_AUTO_NEG) {
|
|
/* Enable BAM aneg Mode and TetonII aneg Mode */
|
|
reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
|
|
MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
|
|
} else {
|
|
/* TetonII and BAM Autoneg Disabled */
|
|
reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
|
|
MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
|
|
}
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_BAM_NEXT_PAGE,
|
|
MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
|
|
reg_val);
|
|
|
|
/* Enable Clause 73 Aneg */
|
|
if ((vars->line_speed == SPEED_AUTO_NEG) &&
|
|
(SUPPORT_CL73)) {
|
|
/* Enable BAM Station Manager */
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_CL73_USERB0,
|
|
MDIO_CL73_USERB0_CL73_BAM_CTRL1,
|
|
(MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
|
|
MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
|
|
MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN));
|
|
|
|
/* Merge CL73 and CL37 aneg resolution */
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_CL73_USERB0,
|
|
MDIO_CL73_USERB0_CL73_BAM_CTRL3,
|
|
®_val);
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_CL73_USERB0,
|
|
MDIO_CL73_USERB0_CL73_BAM_CTRL3,
|
|
(reg_val |
|
|
MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR));
|
|
|
|
/* Set the CL73 AN speed */
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_CL73_IEEEB1,
|
|
MDIO_CL73_IEEEB1_AN_ADV2, ®_val);
|
|
/* In the SerDes we support only the 1G.
|
|
In the XGXS we support the 10G KX4
|
|
but we currently do not support the KR */
|
|
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
|
DP(NETIF_MSG_LINK, "XGXS\n");
|
|
/* 10G KX4 */
|
|
reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
|
|
} else {
|
|
DP(NETIF_MSG_LINK, "SerDes\n");
|
|
/* 1000M KX */
|
|
reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
|
|
}
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_CL73_IEEEB1,
|
|
MDIO_CL73_IEEEB1_AN_ADV2, reg_val);
|
|
|
|
/* CL73 Autoneg Enabled */
|
|
reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
|
|
} else {
|
|
/* CL73 Autoneg Disabled */
|
|
reg_val = 0;
|
|
}
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_CL73_IEEEB0,
|
|
MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val);
|
|
}
|
|
|
|
/* program SerDes, forced speed */
|
|
static void bnx2x_program_serdes(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 reg_val;
|
|
|
|
/* program duplex, disable autoneg */
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL, ®_val);
|
|
reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX |
|
|
MDIO_COMBO_IEEO_MII_CONTROL_AN_EN);
|
|
if (params->req_duplex == DUPLEX_FULL)
|
|
reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
|
|
|
|
/* program speed
|
|
- needed only if the speed is greater than 1G (2.5G or 10G) */
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_SERDES_DIGITAL,
|
|
MDIO_SERDES_DIGITAL_MISC1, ®_val);
|
|
/* clearing the speed value before setting the right speed */
|
|
DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val);
|
|
|
|
reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
|
|
MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
|
|
|
|
if (!((vars->line_speed == SPEED_1000) ||
|
|
(vars->line_speed == SPEED_100) ||
|
|
(vars->line_speed == SPEED_10))) {
|
|
|
|
reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
|
|
MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
|
|
if (vars->line_speed == SPEED_10000)
|
|
reg_val |=
|
|
MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
|
|
if (vars->line_speed == SPEED_13000)
|
|
reg_val |=
|
|
MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G;
|
|
}
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_SERDES_DIGITAL,
|
|
MDIO_SERDES_DIGITAL_MISC1, reg_val);
|
|
|
|
}
|
|
|
|
static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 val = 0;
|
|
|
|
/* configure the 48 bits for BAM AN */
|
|
|
|
/* set extended capabilities */
|
|
if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
|
|
val |= MDIO_OVER_1G_UP1_2_5G;
|
|
if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
|
|
val |= MDIO_OVER_1G_UP1_10G;
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_OVER_1G,
|
|
MDIO_OVER_1G_UP1, val);
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_OVER_1G,
|
|
MDIO_OVER_1G_UP3, 0);
|
|
}
|
|
|
|
static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
|
|
{
|
|
*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
|
|
/* resolve pause mode and advertisement
|
|
* Please refer to Table 28B-3 of the 802.3ab-1999 spec */
|
|
|
|
switch (params->req_flow_ctrl) {
|
|
case BNX2X_FLOW_CTRL_AUTO:
|
|
if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) {
|
|
*ieee_fc |=
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
|
|
} else {
|
|
*ieee_fc |=
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
|
|
}
|
|
break;
|
|
case BNX2X_FLOW_CTRL_TX:
|
|
*ieee_fc |=
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
|
|
break;
|
|
|
|
case BNX2X_FLOW_CTRL_RX:
|
|
case BNX2X_FLOW_CTRL_BOTH:
|
|
*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
|
|
break;
|
|
|
|
case BNX2X_FLOW_CTRL_NONE:
|
|
default:
|
|
*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
|
|
u32 ieee_fc)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
/* for AN, we are always publishing full duplex */
|
|
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc);
|
|
}
|
|
|
|
static void bnx2x_restart_autoneg(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n");
|
|
if (SUPPORT_CL73) {
|
|
/* enable and restart clause 73 aneg */
|
|
u16 an_ctrl;
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_CL73_IEEEB0,
|
|
MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
|
|
&an_ctrl);
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_CL73_IEEEB0,
|
|
MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
|
|
(an_ctrl |
|
|
MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
|
|
MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
|
|
|
|
} else {
|
|
/* Enable and restart BAM/CL37 aneg */
|
|
u16 mii_control;
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL,
|
|
&mii_control);
|
|
DP(NETIF_MSG_LINK,
|
|
"bnx2x_restart_autoneg mii_control before = 0x%x\n",
|
|
mii_control);
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL,
|
|
(mii_control |
|
|
MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
|
|
MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_initialize_sgmii_process(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 control1;
|
|
|
|
/* in SGMII mode, the unicore is always slave */
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_SERDES_DIGITAL,
|
|
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
|
|
&control1);
|
|
control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT;
|
|
/* set sgmii mode (and not fiber) */
|
|
control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE |
|
|
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET |
|
|
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE);
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_SERDES_DIGITAL,
|
|
MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
|
|
control1);
|
|
|
|
/* if forced speed */
|
|
if (!(vars->line_speed == SPEED_AUTO_NEG)) {
|
|
/* set speed, disable autoneg */
|
|
u16 mii_control;
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL,
|
|
&mii_control);
|
|
mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
|
|
MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK|
|
|
MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
|
|
|
|
switch (vars->line_speed) {
|
|
case SPEED_100:
|
|
mii_control |=
|
|
MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
|
|
break;
|
|
case SPEED_1000:
|
|
mii_control |=
|
|
MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000;
|
|
break;
|
|
case SPEED_10:
|
|
/* there is nothing to set for 10M */
|
|
break;
|
|
default:
|
|
/* invalid speed for SGMII */
|
|
DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
|
|
vars->line_speed);
|
|
break;
|
|
}
|
|
|
|
/* setting the full duplex */
|
|
if (params->req_duplex == DUPLEX_FULL)
|
|
mii_control |=
|
|
MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL,
|
|
mii_control);
|
|
|
|
} else { /* AN mode */
|
|
/* enable and restart AN */
|
|
bnx2x_restart_autoneg(params);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* link management
|
|
*/
|
|
|
|
static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
|
|
{ /* LD LP */
|
|
switch (pause_result) { /* ASYM P ASYM P */
|
|
case 0xb: /* 1 0 1 1 */
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
|
|
break;
|
|
|
|
case 0xe: /* 1 1 1 0 */
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
|
|
break;
|
|
|
|
case 0x5: /* 0 1 0 1 */
|
|
case 0x7: /* 0 1 1 1 */
|
|
case 0xd: /* 1 1 0 1 */
|
|
case 0xf: /* 1 1 1 1 */
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 ext_phy_addr;
|
|
u16 ld_pause; /* local */
|
|
u16 lp_pause; /* link partner */
|
|
u16 an_complete; /* AN complete */
|
|
u16 pause_result;
|
|
u8 ret = 0;
|
|
u32 ext_phy_type;
|
|
u8 port = params->port;
|
|
ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
/* read twice */
|
|
|
|
bnx2x_cl45_read(bp, port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_STATUS, &an_complete);
|
|
bnx2x_cl45_read(bp, port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_STATUS, &an_complete);
|
|
|
|
if (an_complete & MDIO_AN_REG_STATUS_AN_COMPLETE) {
|
|
ret = 1;
|
|
bnx2x_cl45_read(bp, port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_ADV_PAUSE, &ld_pause);
|
|
bnx2x_cl45_read(bp, port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
|
|
pause_result = (ld_pause &
|
|
MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
|
|
pause_result |= (lp_pause &
|
|
MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
|
|
DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
|
|
pause_result);
|
|
bnx2x_pause_resolve(vars, pause_result);
|
|
if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE &&
|
|
ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
|
|
bnx2x_cl45_read(bp, port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_FC_LD, &ld_pause);
|
|
|
|
bnx2x_cl45_read(bp, port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_FC_LP, &lp_pause);
|
|
pause_result = (ld_pause &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5;
|
|
pause_result |= (lp_pause &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
|
|
|
|
bnx2x_pause_resolve(vars, pause_result);
|
|
DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x \n",
|
|
pause_result);
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void bnx2x_flow_ctrl_resolve(struct link_params *params,
|
|
struct link_vars *vars,
|
|
u32 gp_status)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 ld_pause; /* local driver */
|
|
u16 lp_pause; /* link partner */
|
|
u16 pause_result;
|
|
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
|
|
/* resolve from gp_status in case of AN complete and not sgmii */
|
|
if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
|
|
(gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
|
|
(!(vars->phy_flags & PHY_SGMII_FLAG)) &&
|
|
(XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) {
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
|
|
&ld_pause);
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
|
|
&lp_pause);
|
|
pause_result = (ld_pause &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5;
|
|
pause_result |= (lp_pause &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
|
|
DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
|
|
bnx2x_pause_resolve(vars, pause_result);
|
|
} else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
|
|
(bnx2x_ext_phy_resove_fc(params, vars))) {
|
|
return;
|
|
} else {
|
|
if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
|
|
vars->flow_ctrl = params->req_fc_auto_adv;
|
|
else
|
|
vars->flow_ctrl = params->req_flow_ctrl;
|
|
}
|
|
DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);
|
|
}
|
|
|
|
|
|
static u8 bnx2x_link_settings_status(struct link_params *params,
|
|
struct link_vars *vars,
|
|
u32 gp_status)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 new_line_speed;
|
|
u8 rc = 0;
|
|
vars->link_status = 0;
|
|
|
|
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
|
|
DP(NETIF_MSG_LINK, "phy link up gp_status=0x%x\n",
|
|
gp_status);
|
|
|
|
vars->phy_link_up = 1;
|
|
vars->link_status |= LINK_STATUS_LINK_UP;
|
|
|
|
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
|
|
vars->duplex = DUPLEX_FULL;
|
|
else
|
|
vars->duplex = DUPLEX_HALF;
|
|
|
|
bnx2x_flow_ctrl_resolve(params, vars, gp_status);
|
|
|
|
switch (gp_status & GP_STATUS_SPEED_MASK) {
|
|
case GP_STATUS_10M:
|
|
new_line_speed = SPEED_10;
|
|
if (vars->duplex == DUPLEX_FULL)
|
|
vars->link_status |= LINK_10TFD;
|
|
else
|
|
vars->link_status |= LINK_10THD;
|
|
break;
|
|
|
|
case GP_STATUS_100M:
|
|
new_line_speed = SPEED_100;
|
|
if (vars->duplex == DUPLEX_FULL)
|
|
vars->link_status |= LINK_100TXFD;
|
|
else
|
|
vars->link_status |= LINK_100TXHD;
|
|
break;
|
|
|
|
case GP_STATUS_1G:
|
|
case GP_STATUS_1G_KX:
|
|
new_line_speed = SPEED_1000;
|
|
if (vars->duplex == DUPLEX_FULL)
|
|
vars->link_status |= LINK_1000TFD;
|
|
else
|
|
vars->link_status |= LINK_1000THD;
|
|
break;
|
|
|
|
case GP_STATUS_2_5G:
|
|
new_line_speed = SPEED_2500;
|
|
if (vars->duplex == DUPLEX_FULL)
|
|
vars->link_status |= LINK_2500TFD;
|
|
else
|
|
vars->link_status |= LINK_2500THD;
|
|
break;
|
|
|
|
case GP_STATUS_5G:
|
|
case GP_STATUS_6G:
|
|
DP(NETIF_MSG_LINK,
|
|
"link speed unsupported gp_status 0x%x\n",
|
|
gp_status);
|
|
return -EINVAL;
|
|
break;
|
|
case GP_STATUS_10G_KX4:
|
|
case GP_STATUS_10G_HIG:
|
|
case GP_STATUS_10G_CX4:
|
|
new_line_speed = SPEED_10000;
|
|
vars->link_status |= LINK_10GTFD;
|
|
break;
|
|
|
|
case GP_STATUS_12G_HIG:
|
|
new_line_speed = SPEED_12000;
|
|
vars->link_status |= LINK_12GTFD;
|
|
break;
|
|
|
|
case GP_STATUS_12_5G:
|
|
new_line_speed = SPEED_12500;
|
|
vars->link_status |= LINK_12_5GTFD;
|
|
break;
|
|
|
|
case GP_STATUS_13G:
|
|
new_line_speed = SPEED_13000;
|
|
vars->link_status |= LINK_13GTFD;
|
|
break;
|
|
|
|
case GP_STATUS_15G:
|
|
new_line_speed = SPEED_15000;
|
|
vars->link_status |= LINK_15GTFD;
|
|
break;
|
|
|
|
case GP_STATUS_16G:
|
|
new_line_speed = SPEED_16000;
|
|
vars->link_status |= LINK_16GTFD;
|
|
break;
|
|
|
|
default:
|
|
DP(NETIF_MSG_LINK,
|
|
"link speed unsupported gp_status 0x%x\n",
|
|
gp_status);
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
/* Upon link speed change set the NIG into drain mode.
|
|
Comes to deals with possible FIFO glitch due to clk change
|
|
when speed is decreased without link down indicator */
|
|
if (new_line_speed != vars->line_speed) {
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
|
|
+ params->port*4, 0);
|
|
msleep(1);
|
|
}
|
|
vars->line_speed = new_line_speed;
|
|
vars->link_status |= LINK_STATUS_SERDES_LINK;
|
|
|
|
if ((params->req_line_speed == SPEED_AUTO_NEG) &&
|
|
((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
|
|
(XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705))) {
|
|
vars->autoneg = AUTO_NEG_ENABLED;
|
|
|
|
if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
|
|
vars->autoneg |= AUTO_NEG_COMPLETE;
|
|
vars->link_status |=
|
|
LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
|
|
}
|
|
|
|
vars->autoneg |= AUTO_NEG_PARALLEL_DETECTION_USED;
|
|
vars->link_status |=
|
|
LINK_STATUS_PARALLEL_DETECTION_USED;
|
|
|
|
}
|
|
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
|
|
vars->link_status |=
|
|
LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
|
|
|
|
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
|
|
vars->link_status |=
|
|
LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
|
|
|
|
} else { /* link_down */
|
|
DP(NETIF_MSG_LINK, "phy link down\n");
|
|
|
|
vars->phy_link_up = 0;
|
|
|
|
vars->duplex = DUPLEX_FULL;
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
vars->autoneg = AUTO_NEG_DISABLED;
|
|
vars->mac_type = MAC_TYPE_NONE;
|
|
}
|
|
|
|
DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x \n",
|
|
gp_status, vars->phy_link_up, vars->line_speed);
|
|
DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x"
|
|
" autoneg 0x%x\n",
|
|
vars->duplex,
|
|
vars->flow_ctrl, vars->autoneg);
|
|
DP(NETIF_MSG_LINK, "link_status 0x%x\n", vars->link_status);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_set_sgmii_tx_driver(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 lp_up2;
|
|
u16 tx_driver;
|
|
|
|
/* read precomp */
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_OVER_1G,
|
|
MDIO_OVER_1G_LP_UP2, &lp_up2);
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_TX0,
|
|
MDIO_TX0_TX_DRIVER, &tx_driver);
|
|
|
|
/* bits [10:7] at lp_up2, positioned at [15:12] */
|
|
lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >>
|
|
MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) <<
|
|
MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT);
|
|
|
|
if ((lp_up2 != 0) &&
|
|
(lp_up2 != (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK))) {
|
|
/* replace tx_driver bits [15:12] */
|
|
tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK;
|
|
tx_driver |= lp_up2;
|
|
CL45_WR_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_TX0,
|
|
MDIO_TX0_TX_DRIVER, tx_driver);
|
|
}
|
|
}
|
|
|
|
static u8 bnx2x_emac_program(struct link_params *params,
|
|
u32 line_speed, u32 duplex)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u16 mode = 0;
|
|
|
|
DP(NETIF_MSG_LINK, "setting link speed & duplex\n");
|
|
bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 +
|
|
EMAC_REG_EMAC_MODE,
|
|
(EMAC_MODE_25G_MODE |
|
|
EMAC_MODE_PORT_MII_10M |
|
|
EMAC_MODE_HALF_DUPLEX));
|
|
switch (line_speed) {
|
|
case SPEED_10:
|
|
mode |= EMAC_MODE_PORT_MII_10M;
|
|
break;
|
|
|
|
case SPEED_100:
|
|
mode |= EMAC_MODE_PORT_MII;
|
|
break;
|
|
|
|
case SPEED_1000:
|
|
mode |= EMAC_MODE_PORT_GMII;
|
|
break;
|
|
|
|
case SPEED_2500:
|
|
mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII);
|
|
break;
|
|
|
|
default:
|
|
/* 10G not valid for EMAC */
|
|
DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", line_speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (duplex == DUPLEX_HALF)
|
|
mode |= EMAC_MODE_HALF_DUPLEX;
|
|
bnx2x_bits_en(bp,
|
|
GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
|
|
mode);
|
|
|
|
bnx2x_set_led(bp, params->port, LED_MODE_OPER,
|
|
line_speed, params->hw_led_mode, params->chip_id);
|
|
return 0;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* External Phy section */
|
|
/*****************************************************************************/
|
|
static void bnx2x_hw_reset(struct bnx2x *bp, u8 port)
|
|
{
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
|
|
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
|
|
msleep(1);
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
|
|
MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
|
|
}
|
|
|
|
static void bnx2x_ext_phy_reset(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u32 ext_phy_type;
|
|
u8 ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
DP(NETIF_MSG_LINK, "Port %x: bnx2x_ext_phy_reset\n", params->port);
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
/* The PHY reset is controled by GPIO 1
|
|
* Give it 1ms of reset pulse
|
|
*/
|
|
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
|
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
|
|
DP(NETIF_MSG_LINK, "XGXS Direct\n");
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
|
|
DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
|
|
|
|
/* Restore normal power mode*/
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
|
|
params->port);
|
|
|
|
/* HW reset */
|
|
bnx2x_hw_reset(bp, params->port);
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_CTRL, 0xa040);
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
/* Unset Low Power Mode and SW reset */
|
|
/* Restore normal power mode*/
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
|
|
params->port);
|
|
|
|
DP(NETIF_MSG_LINK, "XGXS 8072\n");
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_CTRL,
|
|
1<<15);
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
{
|
|
u16 emac_base;
|
|
emac_base = (params->port) ? GRCBASE_EMAC0 :
|
|
GRCBASE_EMAC1;
|
|
|
|
/* Restore normal power mode*/
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
|
|
params->port);
|
|
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
|
|
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
|
|
params->port);
|
|
|
|
DP(NETIF_MSG_LINK, "XGXS 8073\n");
|
|
}
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
|
|
|
|
/* Restore normal power mode*/
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
|
|
params->port);
|
|
|
|
/* HW reset */
|
|
bnx2x_hw_reset(bp, params->port);
|
|
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
|
|
DP(NETIF_MSG_LINK, "XGXS PHY Failure detected\n");
|
|
break;
|
|
|
|
default:
|
|
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
|
|
params->ext_phy_config);
|
|
break;
|
|
}
|
|
|
|
} else { /* SerDes */
|
|
ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
|
|
DP(NETIF_MSG_LINK, "SerDes Direct\n");
|
|
break;
|
|
|
|
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
|
|
DP(NETIF_MSG_LINK, "SerDes 5482\n");
|
|
bnx2x_hw_reset(bp, params->port);
|
|
break;
|
|
|
|
default:
|
|
DP(NETIF_MSG_LINK,
|
|
"BAD SerDes ext_phy_config 0x%x\n",
|
|
params->ext_phy_config);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_bcm8072_external_rom_boot(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u8 ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
u16 fw_ver1, fw_ver2;
|
|
|
|
/* Need to wait 200ms after reset */
|
|
msleep(200);
|
|
/* Boot port from external ROM
|
|
* Set ser_boot_ctl bit in the MISC_CTRL1 register
|
|
*/
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_MISC_CTRL1, 0x0001);
|
|
|
|
/* Reset internal microprocessor */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_GEN_CTRL,
|
|
MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
|
|
/* set micro reset = 0 */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_GEN_CTRL,
|
|
MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
|
|
/* Reset internal microprocessor */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_GEN_CTRL,
|
|
MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
|
|
/* wait for 100ms for code download via SPI port */
|
|
msleep(100);
|
|
|
|
/* Clear ser_boot_ctl bit */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_MISC_CTRL1, 0x0000);
|
|
/* Wait 100ms */
|
|
msleep(100);
|
|
|
|
/* Print the PHY FW version */
|
|
bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER1, &fw_ver1);
|
|
bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER2, &fw_ver2);
|
|
DP(NETIF_MSG_LINK, "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
|
|
}
|
|
|
|
static u8 bnx2x_8073_is_snr_needed(struct link_params *params)
|
|
{
|
|
/* This is only required for 8073A1, version 102 only */
|
|
|
|
struct bnx2x *bp = params->bp;
|
|
u8 ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
u16 val;
|
|
|
|
/* Read 8073 HW revision*/
|
|
bnx2x_cl45_read(bp, params->port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xc801, &val);
|
|
|
|
if (val != 1) {
|
|
/* No need to workaround in 8073 A1 */
|
|
return 0;
|
|
}
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER2, &val);
|
|
|
|
/* SNR should be applied only for version 0x102 */
|
|
if (val != 0x102)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
u16 val, cnt, cnt1 ;
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xc801, &val);
|
|
|
|
if (val > 0) {
|
|
/* No need to workaround in 8073 A1 */
|
|
return 0;
|
|
}
|
|
/* XAUI workaround in 8073 A0: */
|
|
|
|
/* After loading the boot ROM and restarting Autoneg,
|
|
poll Dev1, Reg $C820: */
|
|
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
bnx2x_cl45_read(bp, params->port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xc820, &val);
|
|
/* If bit [14] = 0 or bit [13] = 0, continue on with
|
|
system initialization (XAUI work-around not required,
|
|
as these bits indicate 2.5G or 1G link up). */
|
|
if (!(val & (1<<14)) || !(val & (1<<13))) {
|
|
DP(NETIF_MSG_LINK, "XAUI work-around not required\n");
|
|
return 0;
|
|
} else if (!(val & (1<<15))) {
|
|
DP(NETIF_MSG_LINK, "clc bit 15 went off\n");
|
|
/* If bit 15 is 0, then poll Dev1, Reg $C841 until
|
|
it's MSB (bit 15) goes to 1 (indicating that the
|
|
XAUI workaround has completed),
|
|
then continue on with system initialization.*/
|
|
for (cnt1 = 0; cnt1 < 1000; cnt1++) {
|
|
bnx2x_cl45_read(bp, params->port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xc841, &val);
|
|
if (val & (1<<15)) {
|
|
DP(NETIF_MSG_LINK,
|
|
"XAUI workaround has completed\n");
|
|
return 0;
|
|
}
|
|
msleep(3);
|
|
}
|
|
break;
|
|
}
|
|
msleep(3);
|
|
}
|
|
DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n");
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
|
|
u8 ext_phy_addr)
|
|
{
|
|
u16 fw_ver1, fw_ver2;
|
|
/* Boot port from external ROM */
|
|
/* EDC grst */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_GEN_CTRL,
|
|
0x0001);
|
|
|
|
/* ucode reboot and rst */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_GEN_CTRL,
|
|
0x008c);
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_MISC_CTRL1, 0x0001);
|
|
|
|
/* Reset internal microprocessor */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_GEN_CTRL,
|
|
MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
|
|
|
|
/* Release srst bit */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_GEN_CTRL,
|
|
MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
|
|
|
|
/* wait for 100ms for code download via SPI port */
|
|
msleep(100);
|
|
|
|
/* Clear ser_boot_ctl bit */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_MISC_CTRL1, 0x0000);
|
|
|
|
bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER1, &fw_ver1);
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER2, &fw_ver2);
|
|
DP(NETIF_MSG_LINK, "8073 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
|
|
|
|
}
|
|
|
|
static void bnx2x_bcm807x_force_10G(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u8 ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
|
|
/* Force KR or KX */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_CTRL,
|
|
0x2040);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_10G_CTRL2,
|
|
0x000b);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_BCM_CTRL,
|
|
0x0000);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CTRL,
|
|
0x0000);
|
|
}
|
|
static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u16 val;
|
|
u8 ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xc801, &val);
|
|
|
|
if (val == 0) {
|
|
/* Mustn't set low power mode in 8073 A0 */
|
|
return;
|
|
}
|
|
|
|
/* Disable PLL sequencer (use read-modify-write to clear bit 13) */
|
|
bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD,
|
|
MDIO_XS_PLL_SEQUENCER, &val);
|
|
val &= ~(1<<13);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
|
|
|
|
/* PLL controls */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x805E, 0x1077);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x805D, 0x0000);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x805C, 0x030B);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x805B, 0x1240);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x805A, 0x2490);
|
|
|
|
/* Tx Controls */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x80A7, 0x0C74);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x80A6, 0x9041);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x80A5, 0x4640);
|
|
|
|
/* Rx Controls */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x80FE, 0x01C4);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x80FD, 0x9249);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, 0x80FC, 0x2015);
|
|
|
|
/* Enable PLL sequencer (use read-modify-write to set bit 13) */
|
|
bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD,
|
|
MDIO_XS_PLL_SEQUENCER, &val);
|
|
val |= (1<<13);
|
|
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
|
|
MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
|
|
}
|
|
|
|
static void bnx2x_8073_set_pause_cl37(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
|
|
struct bnx2x *bp = params->bp;
|
|
u16 cl37_val;
|
|
u8 ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_FC_LD, &cl37_val);
|
|
|
|
cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
|
|
/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
|
|
|
|
if ((vars->ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
|
|
cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
|
|
}
|
|
if ((vars->ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
|
|
cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
|
|
}
|
|
if ((vars->ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
|
|
cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
|
|
}
|
|
DP(NETIF_MSG_LINK,
|
|
"Ext phy AN advertize cl37 0x%x\n", cl37_val);
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_FC_LD, cl37_val);
|
|
msleep(500);
|
|
}
|
|
|
|
static void bnx2x_ext_phy_set_pause(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 val;
|
|
u8 ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
|
|
/* read modify write pause advertizing */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_ADV_PAUSE, &val);
|
|
|
|
val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
|
|
|
|
/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
|
|
|
|
if ((vars->ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
|
|
val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
|
|
}
|
|
if ((vars->ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
|
|
val |=
|
|
MDIO_AN_REG_ADV_PAUSE_PAUSE;
|
|
}
|
|
DP(NETIF_MSG_LINK,
|
|
"Ext phy AN advertize 0x%x\n", val);
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_ADV_PAUSE, val);
|
|
}
|
|
|
|
|
|
static void bnx2x_init_internal_phy(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
|
|
u16 bank, rx_eq;
|
|
|
|
rx_eq = ((params->serdes_config &
|
|
PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
|
|
PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
|
|
|
|
DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
|
|
for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
|
|
bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
|
|
CL45_WR_OVER_CL22(bp, port,
|
|
params->phy_addr,
|
|
bank ,
|
|
MDIO_RX0_RX_EQ_BOOST,
|
|
((rx_eq &
|
|
MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
|
|
MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
|
|
}
|
|
|
|
/* forced speed requested? */
|
|
if (vars->line_speed != SPEED_AUTO_NEG) {
|
|
DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
|
|
|
|
/* disable autoneg */
|
|
bnx2x_set_autoneg(params, vars);
|
|
|
|
/* program speed and duplex */
|
|
bnx2x_program_serdes(params, vars);
|
|
|
|
} else { /* AN_mode */
|
|
DP(NETIF_MSG_LINK, "not SGMII, AN\n");
|
|
|
|
/* AN enabled */
|
|
bnx2x_set_brcm_cl37_advertisment(params);
|
|
|
|
/* program duplex & pause advertisement (for aneg) */
|
|
bnx2x_set_ieee_aneg_advertisment(params,
|
|
vars->ieee_fc);
|
|
|
|
/* enable autoneg */
|
|
bnx2x_set_autoneg(params, vars);
|
|
|
|
/* enable and restart AN */
|
|
bnx2x_restart_autoneg(params);
|
|
}
|
|
|
|
} else { /* SGMII mode */
|
|
DP(NETIF_MSG_LINK, "SGMII\n");
|
|
|
|
bnx2x_initialize_sgmii_process(params, vars);
|
|
}
|
|
}
|
|
|
|
static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u32 ext_phy_type;
|
|
u8 ext_phy_addr;
|
|
u16 cnt;
|
|
u16 ctrl = 0;
|
|
u16 val = 0;
|
|
u8 rc = 0;
|
|
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
|
ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
/* Make sure that the soft reset is off (expect for the 8072:
|
|
* due to the lock, it will be done inside the specific
|
|
* handling)
|
|
*/
|
|
if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
|
|
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
|
|
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
|
|
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) &&
|
|
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073)) {
|
|
/* Wait for soft reset to get cleared upto 1 sec */
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_CTRL, &ctrl);
|
|
if (!(ctrl & (1<<15)))
|
|
break;
|
|
msleep(1);
|
|
}
|
|
DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n",
|
|
ctrl, cnt);
|
|
}
|
|
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
|
|
DP(NETIF_MSG_LINK, "XGXS 8705\n");
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_MISC_CTRL,
|
|
0x8288);
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_PHY_IDENTIFIER,
|
|
0x7fbf);
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_CMU_PLL_BYPASS,
|
|
0x0100);
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_WIS_DEVAD,
|
|
MDIO_WIS_REG_LASI_CNTL, 0x1);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
|
|
DP(NETIF_MSG_LINK, "XGXS 8706\n");
|
|
|
|
msleep(10);
|
|
/* Force speed */
|
|
/* First enable LASI */
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_RX_ALARM_CTRL,
|
|
0x0400);
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_LASI_CTRL, 0x0004);
|
|
|
|
if (params->req_line_speed == SPEED_10000) {
|
|
DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n");
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_DIGITAL_CTRL,
|
|
0x400);
|
|
} else {
|
|
/* Force 1Gbps using autoneg with 1G
|
|
advertisment */
|
|
|
|
/* Allow CL37 through CL73 */
|
|
DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_CL73,
|
|
0x040c);
|
|
|
|
/* Enable Full-Duplex advertisment on CL37 */
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_FC_LP,
|
|
0x0020);
|
|
/* Enable CL37 AN */
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_AN,
|
|
0x1000);
|
|
/* 1G support */
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_ADV, (1<<5));
|
|
|
|
/* Enable clause 73 AN */
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CTRL,
|
|
0x1200);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
{
|
|
u16 tmp1;
|
|
u16 rx_alarm_ctrl_val;
|
|
u16 lasi_ctrl_val;
|
|
if (ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
|
|
rx_alarm_ctrl_val = 0x400;
|
|
lasi_ctrl_val = 0x0004;
|
|
} else {
|
|
rx_alarm_ctrl_val = (1<<2);
|
|
lasi_ctrl_val = 0x0004;
|
|
}
|
|
|
|
/* enable LASI */
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_RX_ALARM_CTRL,
|
|
rx_alarm_ctrl_val);
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_LASI_CTRL,
|
|
lasi_ctrl_val);
|
|
|
|
bnx2x_8073_set_pause_cl37(params, vars);
|
|
|
|
if (ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){
|
|
bnx2x_bcm8072_external_rom_boot(params);
|
|
} else {
|
|
|
|
/* In case of 8073 with long xaui lines,
|
|
don't set the 8073 xaui low power*/
|
|
bnx2x_bcm8073_set_xaui_low_power_mode(params);
|
|
}
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xca13,
|
|
&tmp1);
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_RX_ALARM, &tmp1);
|
|
|
|
DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1):"
|
|
"0x%x\n", tmp1);
|
|
|
|
/* If this is forced speed, set to KR or KX
|
|
* (all other are not supported)
|
|
*/
|
|
if (params->loopback_mode == LOOPBACK_EXT) {
|
|
bnx2x_bcm807x_force_10G(params);
|
|
DP(NETIF_MSG_LINK,
|
|
"Forced speed 10G on 807X\n");
|
|
break;
|
|
} else {
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type, ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_BCM_CTRL,
|
|
0x0002);
|
|
}
|
|
if (params->req_line_speed != SPEED_AUTO_NEG) {
|
|
if (params->req_line_speed == SPEED_10000) {
|
|
val = (1<<7);
|
|
} else if (params->req_line_speed ==
|
|
SPEED_2500) {
|
|
val = (1<<5);
|
|
/* Note that 2.5G works only
|
|
when used with 1G advertisment */
|
|
} else
|
|
val = (1<<5);
|
|
} else {
|
|
|
|
val = 0;
|
|
if (params->speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
|
|
val |= (1<<7);
|
|
|
|
/* Note that 2.5G works only when
|
|
used with 1G advertisment */
|
|
if (params->speed_cap_mask &
|
|
(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
|
|
val |= (1<<5);
|
|
DP(NETIF_MSG_LINK,
|
|
"807x autoneg val = 0x%x\n", val);
|
|
}
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_ADV, val);
|
|
|
|
if (ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
0x8329, &tmp1);
|
|
|
|
if (((params->speed_cap_mask &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
|
|
(params->req_line_speed ==
|
|
SPEED_AUTO_NEG)) ||
|
|
(params->req_line_speed ==
|
|
SPEED_2500)) {
|
|
u16 phy_ver;
|
|
/* Allow 2.5G for A1 and above */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xc801, &phy_ver);
|
|
DP(NETIF_MSG_LINK, "Add 2.5G\n");
|
|
if (phy_ver > 0)
|
|
tmp1 |= 1;
|
|
else
|
|
tmp1 &= 0xfffe;
|
|
} else {
|
|
DP(NETIF_MSG_LINK, "Disable 2.5G\n");
|
|
tmp1 &= 0xfffe;
|
|
}
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
0x8329, tmp1);
|
|
}
|
|
|
|
/* Add support for CL37 (passive mode) II */
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_FC_LD,
|
|
&tmp1);
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_FC_LD, (tmp1 |
|
|
((params->req_duplex == DUPLEX_FULL) ?
|
|
0x20 : 0x40)));
|
|
|
|
/* Add support for CL37 (passive mode) III */
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CL37_AN, 0x1000);
|
|
|
|
if (ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
|
|
/* The SNR will improve about 2db by changing
|
|
BW and FEE main tap. Rest commands are executed
|
|
after link is up*/
|
|
/*Change FFE main cursor to 5 in EDC register*/
|
|
if (bnx2x_8073_is_snr_needed(params))
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_EDC_FFE_MAIN,
|
|
0xFB0C);
|
|
|
|
/* Enable FEC (Forware Error Correction)
|
|
Request in the AN */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_ADV2, &tmp1);
|
|
|
|
tmp1 |= (1<<15);
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_ADV2, tmp1);
|
|
|
|
}
|
|
|
|
bnx2x_ext_phy_set_pause(params, vars);
|
|
|
|
/* Restart autoneg */
|
|
msleep(500);
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CTRL, 0x1200);
|
|
DP(NETIF_MSG_LINK, "807x Autoneg Restart: "
|
|
"Advertise 1G=%x, 10G=%x\n",
|
|
((val & (1<<5)) > 0),
|
|
((val & (1<<7)) > 0));
|
|
break;
|
|
}
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
DP(NETIF_MSG_LINK,
|
|
"Setting the SFX7101 LASI indication\n");
|
|
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_LASI_CTRL, 0x1);
|
|
DP(NETIF_MSG_LINK,
|
|
"Setting the SFX7101 LED to blink on traffic\n");
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_7107_LED_CNTL, (1<<3));
|
|
|
|
bnx2x_ext_phy_set_pause(params, vars);
|
|
/* Restart autoneg */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CTRL, &val);
|
|
val |= 0x200;
|
|
bnx2x_cl45_write(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_CTRL, val);
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
|
|
DP(NETIF_MSG_LINK,
|
|
"XGXS PHY Failure detected 0x%x\n",
|
|
params->ext_phy_config);
|
|
rc = -EINVAL;
|
|
break;
|
|
default:
|
|
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
|
|
params->ext_phy_config);
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
} else { /* SerDes */
|
|
|
|
ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
|
|
DP(NETIF_MSG_LINK, "SerDes Direct\n");
|
|
break;
|
|
|
|
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
|
|
DP(NETIF_MSG_LINK, "SerDes 5482\n");
|
|
break;
|
|
|
|
default:
|
|
DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
|
|
params->ext_phy_config);
|
|
break;
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
|
|
static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u32 ext_phy_type;
|
|
u8 ext_phy_addr;
|
|
u16 val1 = 0, val2;
|
|
u16 rx_sd, pcs_status;
|
|
u8 ext_phy_link_up = 0;
|
|
u8 port = params->port;
|
|
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
|
ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
|
|
DP(NETIF_MSG_LINK, "XGXS Direct\n");
|
|
ext_phy_link_up = 1;
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
|
|
DP(NETIF_MSG_LINK, "XGXS 8705\n");
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_WIS_DEVAD,
|
|
MDIO_WIS_REG_LASI_STATUS, &val1);
|
|
DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
|
|
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_WIS_DEVAD,
|
|
MDIO_WIS_REG_LASI_STATUS, &val1);
|
|
DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
|
|
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_RX_SD, &rx_sd);
|
|
DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
|
|
ext_phy_link_up = (rx_sd & 0x1);
|
|
if (ext_phy_link_up)
|
|
vars->line_speed = SPEED_10000;
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
|
|
DP(NETIF_MSG_LINK, "XGXS 8706\n");
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_LASI_STATUS, &val1);
|
|
DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
|
|
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_LASI_STATUS, &val1);
|
|
DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
|
|
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_RX_SD, &rx_sd);
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_STATUS, &pcs_status);
|
|
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_LINK_STATUS, &val2);
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_LINK_STATUS, &val2);
|
|
|
|
DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x"
|
|
" pcs_status 0x%x 1Gbps link_status 0x%x\n",
|
|
rx_sd, pcs_status, val2);
|
|
/* link is up if both bit 0 of pmd_rx_sd and
|
|
* bit 0 of pcs_status are set, or if the autoneg bit
|
|
1 is set
|
|
*/
|
|
ext_phy_link_up = ((rx_sd & pcs_status & 0x1) ||
|
|
(val2 & (1<<1)));
|
|
if (ext_phy_link_up) {
|
|
if (val2 & (1<<1))
|
|
vars->line_speed = SPEED_1000;
|
|
else
|
|
vars->line_speed = SPEED_10000;
|
|
}
|
|
|
|
/* clear LASI indication*/
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_RX_ALARM, &val2);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
{
|
|
u16 link_status = 0;
|
|
u16 an1000_status = 0;
|
|
if (ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_LASI_STATUS, &val1);
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_LASI_STATUS, &val2);
|
|
DP(NETIF_MSG_LINK,
|
|
"870x LASI status 0x%x->0x%x\n",
|
|
val1, val2);
|
|
|
|
} else {
|
|
/* In 8073, port1 is directed through emac0 and
|
|
* port0 is directed through emac1
|
|
*/
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_LASI_STATUS, &val1);
|
|
|
|
DP(NETIF_MSG_LINK,
|
|
"8703 LASI status 0x%x\n",
|
|
val1);
|
|
}
|
|
|
|
/* clear the interrupt LASI status register */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_STATUS, &val2);
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_STATUS, &val1);
|
|
DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n",
|
|
val2, val1);
|
|
/* Clear MSG-OUT */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xca13,
|
|
&val1);
|
|
|
|
/* Check the LASI */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_RX_ALARM, &val2);
|
|
|
|
DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
|
|
|
|
/* Check the link status */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_STATUS, &val2);
|
|
DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_STATUS, &val2);
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_STATUS, &val1);
|
|
ext_phy_link_up = ((val1 & 4) == 4);
|
|
DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);
|
|
if (ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
|
|
|
|
if (ext_phy_link_up &&
|
|
((params->req_line_speed !=
|
|
SPEED_10000))) {
|
|
if (bnx2x_bcm8073_xaui_wa(params)
|
|
!= 0) {
|
|
ext_phy_link_up = 0;
|
|
break;
|
|
}
|
|
}
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
0x8304,
|
|
&an1000_status);
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
0x8304,
|
|
&an1000_status);
|
|
|
|
/* Check the link status on 1.1.2 */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_STATUS, &val2);
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_STATUS, &val1);
|
|
DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x,"
|
|
"an_link_status=0x%x\n",
|
|
val2, val1, an1000_status);
|
|
|
|
ext_phy_link_up = (((val1 & 4) == 4) ||
|
|
(an1000_status & (1<<1)));
|
|
if (ext_phy_link_up &&
|
|
bnx2x_8073_is_snr_needed(params)) {
|
|
/* The SNR will improve about 2dbby
|
|
changing the BW and FEE main tap.*/
|
|
|
|
/* The 1st write to change FFE main
|
|
tap is set before restart AN */
|
|
/* Change PLL Bandwidth in EDC
|
|
register */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_PLL_BANDWIDTH,
|
|
0x26BC);
|
|
|
|
/* Change CDR Bandwidth in EDC
|
|
register */
|
|
bnx2x_cl45_write(bp, port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_CDR_BANDWIDTH,
|
|
0x0333);
|
|
|
|
|
|
}
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
0xc820,
|
|
&link_status);
|
|
|
|
/* Bits 0..2 --> speed detected,
|
|
bits 13..15--> link is down */
|
|
if ((link_status & (1<<2)) &&
|
|
(!(link_status & (1<<15)))) {
|
|
ext_phy_link_up = 1;
|
|
vars->line_speed = SPEED_10000;
|
|
DP(NETIF_MSG_LINK,
|
|
"port %x: External link"
|
|
" up in 10G\n", params->port);
|
|
} else if ((link_status & (1<<1)) &&
|
|
(!(link_status & (1<<14)))) {
|
|
ext_phy_link_up = 1;
|
|
vars->line_speed = SPEED_2500;
|
|
DP(NETIF_MSG_LINK,
|
|
"port %x: External link"
|
|
" up in 2.5G\n", params->port);
|
|
} else if ((link_status & (1<<0)) &&
|
|
(!(link_status & (1<<13)))) {
|
|
ext_phy_link_up = 1;
|
|
vars->line_speed = SPEED_1000;
|
|
DP(NETIF_MSG_LINK,
|
|
"port %x: External link"
|
|
" up in 1G\n", params->port);
|
|
} else {
|
|
ext_phy_link_up = 0;
|
|
DP(NETIF_MSG_LINK,
|
|
"port %x: External link"
|
|
" is down\n", params->port);
|
|
}
|
|
} else {
|
|
/* See if 1G link is up for the 8072 */
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
0x8304,
|
|
&an1000_status);
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
0x8304,
|
|
&an1000_status);
|
|
if (an1000_status & (1<<1)) {
|
|
ext_phy_link_up = 1;
|
|
vars->line_speed = SPEED_1000;
|
|
DP(NETIF_MSG_LINK,
|
|
"port %x: External link"
|
|
" up in 1G\n", params->port);
|
|
} else if (ext_phy_link_up) {
|
|
ext_phy_link_up = 1;
|
|
vars->line_speed = SPEED_10000;
|
|
DP(NETIF_MSG_LINK,
|
|
"port %x: External link"
|
|
" up in 10G\n", params->port);
|
|
}
|
|
}
|
|
|
|
|
|
break;
|
|
}
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_LASI_STATUS, &val2);
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_LASI_STATUS, &val1);
|
|
DP(NETIF_MSG_LINK,
|
|
"10G-base-T LASI status 0x%x->0x%x\n",
|
|
val2, val1);
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_STATUS, &val2);
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_STATUS, &val1);
|
|
DP(NETIF_MSG_LINK,
|
|
"10G-base-T PMA status 0x%x->0x%x\n",
|
|
val2, val1);
|
|
ext_phy_link_up = ((val1 & 4) == 4);
|
|
/* if link is up
|
|
* print the AN outcome of the SFX7101 PHY
|
|
*/
|
|
if (ext_phy_link_up) {
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_AN_DEVAD,
|
|
MDIO_AN_REG_MASTER_STATUS,
|
|
&val2);
|
|
vars->line_speed = SPEED_10000;
|
|
DP(NETIF_MSG_LINK,
|
|
"SFX7101 AN status 0x%x->Master=%x\n",
|
|
val2,
|
|
(val2 & (1<<14)));
|
|
}
|
|
break;
|
|
|
|
default:
|
|
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
|
|
params->ext_phy_config);
|
|
ext_phy_link_up = 0;
|
|
break;
|
|
}
|
|
|
|
} else { /* SerDes */
|
|
ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
|
|
DP(NETIF_MSG_LINK, "SerDes Direct\n");
|
|
ext_phy_link_up = 1;
|
|
break;
|
|
|
|
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
|
|
DP(NETIF_MSG_LINK, "SerDes 5482\n");
|
|
ext_phy_link_up = 1;
|
|
break;
|
|
|
|
default:
|
|
DP(NETIF_MSG_LINK,
|
|
"BAD SerDes ext_phy_config 0x%x\n",
|
|
params->ext_phy_config);
|
|
ext_phy_link_up = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ext_phy_link_up;
|
|
}
|
|
|
|
static void bnx2x_link_int_enable(struct link_params *params)
|
|
{
|
|
u8 port = params->port;
|
|
u32 ext_phy_type;
|
|
u32 mask;
|
|
struct bnx2x *bp = params->bp;
|
|
/* setting the status to report on link up
|
|
for either XGXS or SerDes */
|
|
|
|
if (params->switch_cfg == SWITCH_CFG_10G) {
|
|
mask = (NIG_MASK_XGXS0_LINK10G |
|
|
NIG_MASK_XGXS0_LINK_STATUS);
|
|
DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
|
|
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
|
|
(ext_phy_type !=
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
|
|
mask |= NIG_MASK_MI_INT;
|
|
DP(NETIF_MSG_LINK, "enabled external phy int\n");
|
|
}
|
|
|
|
} else { /* SerDes */
|
|
mask = NIG_MASK_SERDES0_LINK_STATUS;
|
|
DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
|
|
ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
|
|
if ((ext_phy_type !=
|
|
PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
|
|
(ext_phy_type !=
|
|
PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
|
|
mask |= NIG_MASK_MI_INT;
|
|
DP(NETIF_MSG_LINK, "enabled external phy int\n");
|
|
}
|
|
}
|
|
bnx2x_bits_en(bp,
|
|
NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
|
|
mask);
|
|
DP(NETIF_MSG_LINK, "port %x, is_xgxs=%x, int_status 0x%x\n", port,
|
|
(params->switch_cfg == SWITCH_CFG_10G),
|
|
REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
|
|
|
|
DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n",
|
|
REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
|
|
REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
|
|
REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS+port*0x3c));
|
|
DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",
|
|
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
|
|
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
|
|
}
|
|
|
|
|
|
/*
|
|
* link management
|
|
*/
|
|
static void bnx2x_link_int_ack(struct link_params *params,
|
|
struct link_vars *vars, u8 is_10g)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
|
|
/* first reset all status
|
|
* we assume only one line will be change at a time */
|
|
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
|
|
(NIG_STATUS_XGXS0_LINK10G |
|
|
NIG_STATUS_XGXS0_LINK_STATUS |
|
|
NIG_STATUS_SERDES0_LINK_STATUS));
|
|
if (vars->phy_link_up) {
|
|
if (is_10g) {
|
|
/* Disable the 10G link interrupt
|
|
* by writing 1 to the status register
|
|
*/
|
|
DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
|
|
bnx2x_bits_en(bp,
|
|
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
|
|
NIG_STATUS_XGXS0_LINK10G);
|
|
|
|
} else if (params->switch_cfg == SWITCH_CFG_10G) {
|
|
/* Disable the link interrupt
|
|
* by writing 1 to the relevant lane
|
|
* in the status register
|
|
*/
|
|
u32 ser_lane = ((params->lane_config &
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
|
|
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
|
|
|
|
DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
|
|
bnx2x_bits_en(bp,
|
|
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
|
|
((1 << ser_lane) <<
|
|
NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
|
|
|
|
} else { /* SerDes */
|
|
DP(NETIF_MSG_LINK, "SerDes phy link up\n");
|
|
/* Disable the link interrupt
|
|
* by writing 1 to the status register
|
|
*/
|
|
bnx2x_bits_en(bp,
|
|
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
|
|
NIG_STATUS_SERDES0_LINK_STATUS);
|
|
}
|
|
|
|
} else { /* link_down */
|
|
}
|
|
}
|
|
|
|
static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
|
|
{
|
|
u8 *str_ptr = str;
|
|
u32 mask = 0xf0000000;
|
|
u8 shift = 8*4;
|
|
u8 digit;
|
|
if (len < 10) {
|
|
/* Need more than 10chars for this format */
|
|
*str_ptr = '\0';
|
|
return -EINVAL;
|
|
}
|
|
while (shift > 0) {
|
|
|
|
shift -= 4;
|
|
digit = ((num & mask) >> shift);
|
|
if (digit < 0xa)
|
|
*str_ptr = digit + '0';
|
|
else
|
|
*str_ptr = digit - 0xa + 'a';
|
|
str_ptr++;
|
|
mask = mask >> 4;
|
|
if (shift == 4*4) {
|
|
*str_ptr = ':';
|
|
str_ptr++;
|
|
}
|
|
}
|
|
*str_ptr = '\0';
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void bnx2x_turn_on_ef(struct bnx2x *bp, u8 port, u8 ext_phy_addr,
|
|
u32 ext_phy_type)
|
|
{
|
|
u32 cnt = 0;
|
|
u16 ctrl = 0;
|
|
/* Enable EMAC0 in to enable MDIO */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
|
|
(MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
|
|
msleep(5);
|
|
|
|
/* take ext phy out of reset */
|
|
bnx2x_set_gpio(bp,
|
|
MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_HIGH,
|
|
port);
|
|
|
|
bnx2x_set_gpio(bp,
|
|
MISC_REGISTERS_GPIO_1,
|
|
MISC_REGISTERS_GPIO_HIGH,
|
|
port);
|
|
|
|
/* wait for 5ms */
|
|
msleep(5);
|
|
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
msleep(1);
|
|
bnx2x_cl45_read(bp, port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_CTRL,
|
|
&ctrl);
|
|
if (!(ctrl & (1<<15))) {
|
|
DP(NETIF_MSG_LINK, "Reset completed\n\n");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
|
|
{
|
|
/* put sf to reset */
|
|
bnx2x_set_gpio(bp,
|
|
MISC_REGISTERS_GPIO_1,
|
|
MISC_REGISTERS_GPIO_LOW,
|
|
port);
|
|
bnx2x_set_gpio(bp,
|
|
MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_LOW,
|
|
port);
|
|
}
|
|
|
|
u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
|
|
u8 *version, u16 len)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u32 ext_phy_type = 0;
|
|
u16 val = 0;
|
|
u8 ext_phy_addr = 0 ;
|
|
u8 status = 0 ;
|
|
u32 ver_num;
|
|
|
|
if (version == NULL || params == NULL)
|
|
return -EINVAL;
|
|
|
|
/* reset the returned value to zero */
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
|
|
if (len < 5)
|
|
return -EINVAL;
|
|
|
|
/* Take ext phy out of reset */
|
|
if (!driver_loaded)
|
|
bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
|
|
ext_phy_type);
|
|
|
|
/* wait for 1ms */
|
|
msleep(1);
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_7101_VER1, &val);
|
|
version[2] = (val & 0xFF);
|
|
version[3] = ((val & 0xFF00)>>8);
|
|
|
|
bnx2x_cl45_read(bp, params->port,
|
|
ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER2,
|
|
&val);
|
|
version[0] = (val & 0xFF);
|
|
version[1] = ((val & 0xFF00)>>8);
|
|
version[4] = '\0';
|
|
|
|
if (!driver_loaded)
|
|
bnx2x_turn_off_sf(bp, params->port);
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
{
|
|
/* Take ext phy out of reset */
|
|
if (!driver_loaded)
|
|
bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
|
|
ext_phy_type);
|
|
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER1, &val);
|
|
ver_num = val<<16;
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER2, &val);
|
|
ver_num |= val;
|
|
status = bnx2x_format_ver(ver_num, version, len);
|
|
break;
|
|
}
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
|
|
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER1, &val);
|
|
ver_num = val<<16;
|
|
bnx2x_cl45_read(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER2, &val);
|
|
ver_num |= val;
|
|
status = bnx2x_format_ver(ver_num, version, len);
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
|
|
break;
|
|
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
|
|
DP(NETIF_MSG_LINK, "bnx2x_get_ext_phy_fw_version:"
|
|
" type is FAILURE!\n");
|
|
status = -EINVAL;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static void bnx2x_set_xgxs_loopback(struct link_params *params,
|
|
struct link_vars *vars,
|
|
u8 is_10g)
|
|
{
|
|
u8 port = params->port;
|
|
struct bnx2x *bp = params->bp;
|
|
|
|
if (is_10g) {
|
|
u32 md_devad;
|
|
|
|
DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
|
|
|
|
/* change the uni_phy_addr in the nig */
|
|
md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD +
|
|
port*0x18));
|
|
|
|
REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5);
|
|
|
|
bnx2x_cl45_write(bp, port, 0,
|
|
params->phy_addr,
|
|
5,
|
|
(MDIO_REG_BANK_AER_BLOCK +
|
|
(MDIO_AER_BLOCK_AER_REG & 0xf)),
|
|
0x2800);
|
|
|
|
bnx2x_cl45_write(bp, port, 0,
|
|
params->phy_addr,
|
|
5,
|
|
(MDIO_REG_BANK_CL73_IEEEB0 +
|
|
(MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
|
|
0x6041);
|
|
msleep(200);
|
|
/* set aer mmd back */
|
|
bnx2x_set_aer_mmd(params, vars);
|
|
|
|
/* and md_devad */
|
|
REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18,
|
|
md_devad);
|
|
|
|
} else {
|
|
u16 mii_control;
|
|
|
|
DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n");
|
|
|
|
CL45_RD_OVER_CL22(bp, port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL,
|
|
&mii_control);
|
|
|
|
CL45_WR_OVER_CL22(bp, port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_COMBO_IEEE0,
|
|
MDIO_COMBO_IEEE0_MII_CONTROL,
|
|
(mii_control |
|
|
MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK));
|
|
}
|
|
}
|
|
|
|
|
|
static void bnx2x_ext_phy_loopback(struct link_params *params)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 ext_phy_addr;
|
|
u32 ext_phy_type;
|
|
|
|
if (params->switch_cfg == SWITCH_CFG_10G) {
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
/* CL37 Autoneg Enabled */
|
|
ext_phy_addr = ((params->ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
|
|
DP(NETIF_MSG_LINK,
|
|
"ext_phy_loopback: We should not get here\n");
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
|
|
DP(NETIF_MSG_LINK, "ext_phy_loopback: 8705\n");
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
|
|
DP(NETIF_MSG_LINK, "ext_phy_loopback: 8706\n");
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
/* SFX7101_XGXS_TEST1 */
|
|
bnx2x_cl45_write(bp, params->port, ext_phy_type,
|
|
ext_phy_addr,
|
|
MDIO_XS_DEVAD,
|
|
MDIO_XS_SFX7101_XGXS_TEST1,
|
|
0x100);
|
|
DP(NETIF_MSG_LINK,
|
|
"ext_phy_loopback: set ext phy loopback\n");
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
|
|
break;
|
|
} /* switch external PHY type */
|
|
} else {
|
|
/* serdes */
|
|
ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
|
|
ext_phy_addr = (params->ext_phy_config &
|
|
PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK)
|
|
>> PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
*------------------------------------------------------------------------
|
|
* bnx2x_override_led_value -
|
|
*
|
|
* Override the led value of the requsted led
|
|
*
|
|
*------------------------------------------------------------------------
|
|
*/
|
|
u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port,
|
|
u32 led_idx, u32 value)
|
|
{
|
|
u32 reg_val;
|
|
|
|
/* If port 0 then use EMAC0, else use EMAC1*/
|
|
u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
|
|
|
|
DP(NETIF_MSG_LINK,
|
|
"bnx2x_override_led_value() port %x led_idx %d value %d\n",
|
|
port, led_idx, value);
|
|
|
|
switch (led_idx) {
|
|
case 0: /* 10MB led */
|
|
/* Read the current value of the LED register in
|
|
the EMAC block */
|
|
reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
|
|
/* Set the OVERRIDE bit to 1 */
|
|
reg_val |= EMAC_LED_OVERRIDE;
|
|
/* If value is 1, set the 10M_OVERRIDE bit,
|
|
otherwise reset it.*/
|
|
reg_val = (value == 1) ? (reg_val | EMAC_LED_10MB_OVERRIDE) :
|
|
(reg_val & ~EMAC_LED_10MB_OVERRIDE);
|
|
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
|
|
break;
|
|
case 1: /*100MB led */
|
|
/*Read the current value of the LED register in
|
|
the EMAC block */
|
|
reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
|
|
/* Set the OVERRIDE bit to 1 */
|
|
reg_val |= EMAC_LED_OVERRIDE;
|
|
/* If value is 1, set the 100M_OVERRIDE bit,
|
|
otherwise reset it.*/
|
|
reg_val = (value == 1) ? (reg_val | EMAC_LED_100MB_OVERRIDE) :
|
|
(reg_val & ~EMAC_LED_100MB_OVERRIDE);
|
|
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
|
|
break;
|
|
case 2: /* 1000MB led */
|
|
/* Read the current value of the LED register in the
|
|
EMAC block */
|
|
reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
|
|
/* Set the OVERRIDE bit to 1 */
|
|
reg_val |= EMAC_LED_OVERRIDE;
|
|
/* If value is 1, set the 1000M_OVERRIDE bit, otherwise
|
|
reset it. */
|
|
reg_val = (value == 1) ? (reg_val | EMAC_LED_1000MB_OVERRIDE) :
|
|
(reg_val & ~EMAC_LED_1000MB_OVERRIDE);
|
|
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
|
|
break;
|
|
case 3: /* 2500MB led */
|
|
/* Read the current value of the LED register in the
|
|
EMAC block*/
|
|
reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
|
|
/* Set the OVERRIDE bit to 1 */
|
|
reg_val |= EMAC_LED_OVERRIDE;
|
|
/* If value is 1, set the 2500M_OVERRIDE bit, otherwise
|
|
reset it.*/
|
|
reg_val = (value == 1) ? (reg_val | EMAC_LED_2500MB_OVERRIDE) :
|
|
(reg_val & ~EMAC_LED_2500MB_OVERRIDE);
|
|
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
|
|
break;
|
|
case 4: /*10G led */
|
|
if (port == 0) {
|
|
REG_WR(bp, NIG_REG_LED_10G_P0,
|
|
value);
|
|
} else {
|
|
REG_WR(bp, NIG_REG_LED_10G_P1,
|
|
value);
|
|
}
|
|
break;
|
|
case 5: /* TRAFFIC led */
|
|
/* Find if the traffic control is via BMAC or EMAC */
|
|
if (port == 0)
|
|
reg_val = REG_RD(bp, NIG_REG_NIG_EMAC0_EN);
|
|
else
|
|
reg_val = REG_RD(bp, NIG_REG_NIG_EMAC1_EN);
|
|
|
|
/* Override the traffic led in the EMAC:*/
|
|
if (reg_val == 1) {
|
|
/* Read the current value of the LED register in
|
|
the EMAC block */
|
|
reg_val = REG_RD(bp, emac_base +
|
|
EMAC_REG_EMAC_LED);
|
|
/* Set the TRAFFIC_OVERRIDE bit to 1 */
|
|
reg_val |= EMAC_LED_OVERRIDE;
|
|
/* If value is 1, set the TRAFFIC bit, otherwise
|
|
reset it.*/
|
|
reg_val = (value == 1) ? (reg_val | EMAC_LED_TRAFFIC) :
|
|
(reg_val & ~EMAC_LED_TRAFFIC);
|
|
REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
|
|
} else { /* Override the traffic led in the BMAC: */
|
|
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
|
|
+ port*4, 1);
|
|
REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4,
|
|
value);
|
|
}
|
|
break;
|
|
default:
|
|
DP(NETIF_MSG_LINK,
|
|
"bnx2x_override_led_value() unknown led index %d "
|
|
"(should be 0-5)\n", led_idx);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
|
|
u16 hw_led_mode, u32 chip_id)
|
|
{
|
|
u8 rc = 0;
|
|
u32 tmp;
|
|
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
|
|
DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
|
|
DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
|
|
speed, hw_led_mode);
|
|
switch (mode) {
|
|
case LED_MODE_OFF:
|
|
REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0);
|
|
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
|
|
SHARED_HW_CFG_LED_MAC1);
|
|
|
|
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
|
|
EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
|
|
break;
|
|
|
|
case LED_MODE_OPER:
|
|
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
|
|
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 +
|
|
port*4, 0);
|
|
/* Set blinking rate to ~15.9Hz */
|
|
REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4,
|
|
LED_BLINK_RATE_VAL);
|
|
REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
|
|
port*4, 1);
|
|
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
|
|
EMAC_WR(bp, EMAC_REG_EMAC_LED,
|
|
(tmp & (~EMAC_LED_OVERRIDE)));
|
|
|
|
if (!CHIP_IS_E1H(bp) &&
|
|
((speed == SPEED_2500) ||
|
|
(speed == SPEED_1000) ||
|
|
(speed == SPEED_100) ||
|
|
(speed == SPEED_10))) {
|
|
/* On Everest 1 Ax chip versions for speeds less than
|
|
10G LED scheme is different */
|
|
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
|
|
+ port*4, 1);
|
|
REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 +
|
|
port*4, 0);
|
|
REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 +
|
|
port*4, 1);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
rc = -EINVAL;
|
|
DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n",
|
|
mode);
|
|
break;
|
|
}
|
|
return rc;
|
|
|
|
}
|
|
|
|
u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u16 gp_status = 0;
|
|
|
|
CL45_RD_OVER_CL22(bp, params->port,
|
|
params->phy_addr,
|
|
MDIO_REG_BANK_GP_STATUS,
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1,
|
|
&gp_status);
|
|
/* link is up only if both local phy and external phy are up */
|
|
if ((gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) &&
|
|
bnx2x_ext_phy_is_link_up(params, vars))
|
|
return 0;
|
|
|
|
return -ESRCH;
|
|
}
|
|
|
|
static u8 bnx2x_link_initialize(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u8 rc = 0;
|
|
u8 non_ext_phy;
|
|
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
/* Activate the external PHY */
|
|
bnx2x_ext_phy_reset(params, vars);
|
|
|
|
bnx2x_set_aer_mmd(params, vars);
|
|
|
|
if (vars->phy_flags & PHY_XGXS_FLAG)
|
|
bnx2x_set_master_ln(params);
|
|
|
|
rc = bnx2x_reset_unicore(params);
|
|
/* reset the SerDes and wait for reset bit return low */
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
bnx2x_set_aer_mmd(params, vars);
|
|
|
|
/* setting the masterLn_def again after the reset */
|
|
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
|
bnx2x_set_master_ln(params);
|
|
bnx2x_set_swap_lanes(params);
|
|
}
|
|
|
|
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
|
if ((params->req_line_speed &&
|
|
((params->req_line_speed == SPEED_100) ||
|
|
(params->req_line_speed == SPEED_10))) ||
|
|
(!params->req_line_speed &&
|
|
(params->speed_cap_mask >=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
|
|
(params->speed_cap_mask <
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
|
|
)) {
|
|
vars->phy_flags |= PHY_SGMII_FLAG;
|
|
} else {
|
|
vars->phy_flags &= ~PHY_SGMII_FLAG;
|
|
}
|
|
}
|
|
/* In case of external phy existance, the line speed would be the
|
|
line speed linked up by the external phy. In case it is direct only,
|
|
then the line_speed during initialization will be equal to the
|
|
req_line_speed*/
|
|
vars->line_speed = params->req_line_speed;
|
|
|
|
bnx2x_calc_ieee_aneg_adv(params, &vars->ieee_fc);
|
|
|
|
/* init ext phy and enable link state int */
|
|
non_ext_phy = ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
|
|
(params->loopback_mode == LOOPBACK_XGXS_10) ||
|
|
(params->loopback_mode == LOOPBACK_EXT_PHY));
|
|
|
|
if (non_ext_phy ||
|
|
(ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705)) {
|
|
if (params->req_line_speed == SPEED_AUTO_NEG)
|
|
bnx2x_set_parallel_detection(params, vars->phy_flags);
|
|
bnx2x_init_internal_phy(params, vars);
|
|
}
|
|
|
|
if (!non_ext_phy)
|
|
rc |= bnx2x_ext_phy_init(params, vars);
|
|
|
|
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
|
|
(NIG_STATUS_XGXS0_LINK10G |
|
|
NIG_STATUS_XGXS0_LINK_STATUS |
|
|
NIG_STATUS_SERDES0_LINK_STATUS));
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
|
|
u32 val;
|
|
DP(NETIF_MSG_LINK, "Phy Initialization started \n");
|
|
DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n",
|
|
params->req_line_speed, params->req_flow_ctrl);
|
|
vars->link_status = 0;
|
|
vars->phy_link_up = 0;
|
|
vars->link_up = 0;
|
|
vars->line_speed = 0;
|
|
vars->duplex = DUPLEX_FULL;
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
vars->mac_type = MAC_TYPE_NONE;
|
|
|
|
if (params->switch_cfg == SWITCH_CFG_1G)
|
|
vars->phy_flags = PHY_SERDES_FLAG;
|
|
else
|
|
vars->phy_flags = PHY_XGXS_FLAG;
|
|
|
|
|
|
/* disable attentions */
|
|
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
|
|
(NIG_MASK_XGXS0_LINK_STATUS |
|
|
NIG_MASK_XGXS0_LINK10G |
|
|
NIG_MASK_SERDES0_LINK_STATUS |
|
|
NIG_MASK_MI_INT));
|
|
|
|
bnx2x_emac_init(params, vars);
|
|
|
|
if (CHIP_REV_IS_FPGA(bp)) {
|
|
vars->link_up = 1;
|
|
vars->line_speed = SPEED_10000;
|
|
vars->duplex = DUPLEX_FULL;
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
|
|
/* enable on E1.5 FPGA */
|
|
if (CHIP_IS_E1H(bp)) {
|
|
vars->flow_ctrl |=
|
|
(BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX);
|
|
vars->link_status |=
|
|
(LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
|
|
LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
|
|
}
|
|
|
|
bnx2x_emac_enable(params, vars, 0);
|
|
bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed);
|
|
/* disable drain */
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
|
|
+ params->port*4, 0);
|
|
|
|
/* update shared memory */
|
|
bnx2x_update_mng(params, vars->link_status);
|
|
|
|
return 0;
|
|
|
|
} else
|
|
if (CHIP_REV_IS_EMUL(bp)) {
|
|
|
|
vars->link_up = 1;
|
|
vars->line_speed = SPEED_10000;
|
|
vars->duplex = DUPLEX_FULL;
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
|
|
|
|
bnx2x_bmac_enable(params, vars, 0);
|
|
|
|
bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed);
|
|
/* Disable drain */
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
|
|
+ params->port*4, 0);
|
|
|
|
/* update shared memory */
|
|
bnx2x_update_mng(params, vars->link_status);
|
|
|
|
return 0;
|
|
|
|
} else
|
|
if (params->loopback_mode == LOOPBACK_BMAC) {
|
|
vars->link_up = 1;
|
|
vars->line_speed = SPEED_10000;
|
|
vars->duplex = DUPLEX_FULL;
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
vars->mac_type = MAC_TYPE_BMAC;
|
|
|
|
vars->phy_flags = PHY_XGXS_FLAG;
|
|
|
|
bnx2x_phy_deassert(params, vars->phy_flags);
|
|
/* set bmac loopback */
|
|
bnx2x_bmac_enable(params, vars, 1);
|
|
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
|
|
params->port*4, 0);
|
|
} else if (params->loopback_mode == LOOPBACK_EMAC) {
|
|
vars->link_up = 1;
|
|
vars->line_speed = SPEED_1000;
|
|
vars->duplex = DUPLEX_FULL;
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
vars->mac_type = MAC_TYPE_EMAC;
|
|
|
|
vars->phy_flags = PHY_XGXS_FLAG;
|
|
|
|
bnx2x_phy_deassert(params, vars->phy_flags);
|
|
/* set bmac loopback */
|
|
bnx2x_emac_enable(params, vars, 1);
|
|
bnx2x_emac_program(params, vars->line_speed,
|
|
vars->duplex);
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
|
|
params->port*4, 0);
|
|
} else if ((params->loopback_mode == LOOPBACK_XGXS_10) ||
|
|
(params->loopback_mode == LOOPBACK_EXT_PHY)) {
|
|
vars->link_up = 1;
|
|
vars->line_speed = SPEED_10000;
|
|
vars->duplex = DUPLEX_FULL;
|
|
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
|
|
|
|
vars->phy_flags = PHY_XGXS_FLAG;
|
|
|
|
val = REG_RD(bp,
|
|
NIG_REG_XGXS0_CTRL_PHY_ADDR+
|
|
params->port*0x18);
|
|
params->phy_addr = (u8)val;
|
|
|
|
bnx2x_phy_deassert(params, vars->phy_flags);
|
|
bnx2x_link_initialize(params, vars);
|
|
|
|
vars->mac_type = MAC_TYPE_BMAC;
|
|
|
|
bnx2x_bmac_enable(params, vars, 0);
|
|
|
|
if (params->loopback_mode == LOOPBACK_XGXS_10) {
|
|
/* set 10G XGXS loopback */
|
|
bnx2x_set_xgxs_loopback(params, vars, 1);
|
|
} else {
|
|
/* set external phy loopback */
|
|
bnx2x_ext_phy_loopback(params);
|
|
}
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
|
|
params->port*4, 0);
|
|
} else
|
|
/* No loopback */
|
|
{
|
|
|
|
bnx2x_phy_deassert(params, vars->phy_flags);
|
|
switch (params->switch_cfg) {
|
|
case SWITCH_CFG_1G:
|
|
vars->phy_flags |= PHY_SERDES_FLAG;
|
|
if ((params->ext_phy_config &
|
|
PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) ==
|
|
PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482) {
|
|
vars->phy_flags |=
|
|
PHY_SGMII_FLAG;
|
|
}
|
|
|
|
val = REG_RD(bp,
|
|
NIG_REG_SERDES0_CTRL_PHY_ADDR+
|
|
params->port*0x10);
|
|
|
|
params->phy_addr = (u8)val;
|
|
|
|
break;
|
|
case SWITCH_CFG_10G:
|
|
vars->phy_flags |= PHY_XGXS_FLAG;
|
|
val = REG_RD(bp,
|
|
NIG_REG_XGXS0_CTRL_PHY_ADDR+
|
|
params->port*0x18);
|
|
params->phy_addr = (u8)val;
|
|
|
|
break;
|
|
default:
|
|
DP(NETIF_MSG_LINK, "Invalid switch_cfg\n");
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
bnx2x_link_initialize(params, vars);
|
|
msleep(30);
|
|
bnx2x_link_int_enable(params);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
|
|
{
|
|
|
|
struct bnx2x *bp = params->bp;
|
|
u32 ext_phy_config = params->ext_phy_config;
|
|
u16 hw_led_mode = params->hw_led_mode;
|
|
u32 chip_id = params->chip_id;
|
|
u8 port = params->port;
|
|
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
|
|
/* disable attentions */
|
|
|
|
vars->link_status = 0;
|
|
bnx2x_update_mng(params, vars->link_status);
|
|
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
|
|
(NIG_MASK_XGXS0_LINK_STATUS |
|
|
NIG_MASK_XGXS0_LINK10G |
|
|
NIG_MASK_SERDES0_LINK_STATUS |
|
|
NIG_MASK_MI_INT));
|
|
|
|
/* activate nig drain */
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
|
|
|
|
/* disable nig egress interface */
|
|
REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
|
|
REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
|
|
|
|
/* Stop BigMac rx */
|
|
bnx2x_bmac_rx_disable(bp, port);
|
|
|
|
/* disable emac */
|
|
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
|
|
|
|
msleep(10);
|
|
/* The PHY reset is controled by GPIO 1
|
|
* Hold it as vars low
|
|
*/
|
|
/* clear link led */
|
|
bnx2x_set_led(bp, port, LED_MODE_OFF, 0, hw_led_mode, chip_id);
|
|
if (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) {
|
|
if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) &&
|
|
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073)) {
|
|
/* HW reset */
|
|
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
|
|
MISC_REGISTERS_GPIO_OUTPUT_LOW,
|
|
port);
|
|
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_LOW,
|
|
port);
|
|
|
|
DP(NETIF_MSG_LINK, "reset external PHY\n");
|
|
} else if (ext_phy_type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
|
|
DP(NETIF_MSG_LINK, "Setting 8073 port %d into "
|
|
"low power mode\n",
|
|
port);
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_LOW,
|
|
port);
|
|
}
|
|
}
|
|
/* reset the SerDes/XGXS */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
|
|
(0x1ff << (port*16)));
|
|
|
|
/* reset BigMac */
|
|
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
|
|
|
|
/* disable nig ingress interface */
|
|
REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0);
|
|
REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0);
|
|
REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
|
|
REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
|
|
vars->link_up = 0;
|
|
return 0;
|
|
}
|
|
|
|
static u8 bnx2x_update_link_down(struct link_params *params,
|
|
struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
|
|
bnx2x_set_led(bp, port, LED_MODE_OFF,
|
|
0, params->hw_led_mode,
|
|
params->chip_id);
|
|
|
|
/* indicate no mac active */
|
|
vars->mac_type = MAC_TYPE_NONE;
|
|
|
|
/* update shared memory */
|
|
vars->link_status = 0;
|
|
vars->line_speed = 0;
|
|
bnx2x_update_mng(params, vars->link_status);
|
|
|
|
/* activate nig drain */
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
|
|
|
|
/* disable emac */
|
|
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
|
|
|
|
msleep(10);
|
|
|
|
/* reset BigMac */
|
|
bnx2x_bmac_rx_disable(bp, params->port);
|
|
REG_WR(bp, GRCBASE_MISC +
|
|
MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
|
|
return 0;
|
|
}
|
|
|
|
static u8 bnx2x_update_link_up(struct link_params *params,
|
|
struct link_vars *vars,
|
|
u8 link_10g, u32 gp_status)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u8 rc = 0;
|
|
vars->link_status |= LINK_STATUS_LINK_UP;
|
|
if (link_10g) {
|
|
bnx2x_bmac_enable(params, vars, 0);
|
|
bnx2x_set_led(bp, port, LED_MODE_OPER,
|
|
SPEED_10000, params->hw_led_mode,
|
|
params->chip_id);
|
|
|
|
} else {
|
|
bnx2x_emac_enable(params, vars, 0);
|
|
rc = bnx2x_emac_program(params, vars->line_speed,
|
|
vars->duplex);
|
|
|
|
/* AN complete? */
|
|
if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
|
|
if (!(vars->phy_flags &
|
|
PHY_SGMII_FLAG))
|
|
bnx2x_set_sgmii_tx_driver(params);
|
|
}
|
|
}
|
|
|
|
/* PBF - link up */
|
|
rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
|
|
vars->line_speed);
|
|
|
|
/* disable drain */
|
|
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
|
|
|
|
/* update shared memory */
|
|
bnx2x_update_mng(params, vars->link_status);
|
|
msleep(20);
|
|
return rc;
|
|
}
|
|
/* This function should called upon link interrupt */
|
|
/* In case vars->link_up, driver needs to
|
|
1. Update the pbf
|
|
2. Disable drain
|
|
3. Update the shared memory
|
|
4. Indicate link up
|
|
5. Set LEDs
|
|
Otherwise,
|
|
1. Update shared memory
|
|
2. Reset BigMac
|
|
3. Report link down
|
|
4. Unset LEDs
|
|
*/
|
|
u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
|
|
{
|
|
struct bnx2x *bp = params->bp;
|
|
u8 port = params->port;
|
|
u16 gp_status;
|
|
u8 link_10g;
|
|
u8 ext_phy_link_up, rc = 0;
|
|
u32 ext_phy_type;
|
|
|
|
DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",
|
|
port,
|
|
(vars->phy_flags & PHY_XGXS_FLAG),
|
|
REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
|
|
|
|
DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n",
|
|
REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
|
|
REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
|
|
REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c));
|
|
|
|
DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",
|
|
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
|
|
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
|
|
|
|
/* disable emac */
|
|
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
|
|
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
|
|
|
/* Check external link change only for non-direct */
|
|
ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars);
|
|
|
|
/* Read gp_status */
|
|
CL45_RD_OVER_CL22(bp, port, params->phy_addr,
|
|
MDIO_REG_BANK_GP_STATUS,
|
|
MDIO_GP_STATUS_TOP_AN_STATUS1,
|
|
&gp_status);
|
|
|
|
rc = bnx2x_link_settings_status(params, vars, gp_status);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
/* anything 10 and over uses the bmac */
|
|
link_10g = ((vars->line_speed == SPEED_10000) ||
|
|
(vars->line_speed == SPEED_12000) ||
|
|
(vars->line_speed == SPEED_12500) ||
|
|
(vars->line_speed == SPEED_13000) ||
|
|
(vars->line_speed == SPEED_15000) ||
|
|
(vars->line_speed == SPEED_16000));
|
|
|
|
bnx2x_link_int_ack(params, vars, link_10g);
|
|
|
|
/* In case external phy link is up, and internal link is down
|
|
( not initialized yet probably after link initialization, it needs
|
|
to be initialized.
|
|
Note that after link down-up as result of cable plug,
|
|
the xgxs link would probably become up again without the need to
|
|
initialize it*/
|
|
|
|
if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
|
|
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
|
|
(ext_phy_link_up && !vars->phy_link_up))
|
|
bnx2x_init_internal_phy(params, vars);
|
|
|
|
/* link is up only if both local phy and external phy are up */
|
|
vars->link_up = (ext_phy_link_up && vars->phy_link_up);
|
|
|
|
if (vars->link_up)
|
|
rc = bnx2x_update_link_up(params, vars, link_10g, gp_status);
|
|
else
|
|
rc = bnx2x_update_link_down(params, vars);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
|
|
{
|
|
u8 ext_phy_addr[PORT_MAX];
|
|
u16 val;
|
|
s8 port;
|
|
|
|
/* PART1 - Reset both phys */
|
|
for (port = PORT_MAX - 1; port >= PORT_0; port--) {
|
|
/* Extract the ext phy address for the port */
|
|
u32 ext_phy_config = REG_RD(bp, shmem_base +
|
|
offsetof(struct shmem_region,
|
|
dev_info.port_hw_config[port].external_phy_config));
|
|
|
|
/* disable attentions */
|
|
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
|
|
(NIG_MASK_XGXS0_LINK_STATUS |
|
|
NIG_MASK_XGXS0_LINK10G |
|
|
NIG_MASK_SERDES0_LINK_STATUS |
|
|
NIG_MASK_MI_INT));
|
|
|
|
ext_phy_addr[port] =
|
|
((ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
|
|
/* Need to take the phy out of low power mode in order
|
|
to write to access its registers */
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
|
|
|
|
/* Reset the phy */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr[port],
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_CTRL,
|
|
1<<15);
|
|
}
|
|
|
|
/* Add delay of 150ms after reset */
|
|
msleep(150);
|
|
|
|
/* PART2 - Download firmware to both phys */
|
|
for (port = PORT_MAX - 1; port >= PORT_0; port--) {
|
|
u16 fw_ver1;
|
|
|
|
bnx2x_bcm8073_external_rom_boot(bp, port,
|
|
ext_phy_addr[port]);
|
|
|
|
bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr[port],
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_ROM_VER1, &fw_ver1);
|
|
if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
|
|
DP(NETIF_MSG_LINK,
|
|
"bnx2x_8073_common_init_phy port %x:"
|
|
"Download failed. fw version = 0x%x\n",
|
|
port, fw_ver1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Only set bit 10 = 1 (Tx power down) */
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr[port],
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_TX_POWER_DOWN, &val);
|
|
|
|
/* Phase1 of TX_POWER_DOWN reset */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr[port],
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_TX_POWER_DOWN,
|
|
(val | 1<<10));
|
|
}
|
|
|
|
/* Toggle Transmitter: Power down and then up with 600ms
|
|
delay between */
|
|
msleep(600);
|
|
|
|
/* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
|
|
for (port = PORT_MAX - 1; port >= PORT_0; port--) {
|
|
/* Phase2 of POWER_DOWN_RESET*/
|
|
/* Release bit 10 (Release Tx power down) */
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr[port],
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_TX_POWER_DOWN, &val);
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr[port],
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
|
|
msleep(15);
|
|
|
|
/* Read modify write the SPI-ROM version select register */
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr[port],
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_EDC_FFE_MAIN, &val);
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
|
|
ext_phy_addr[port],
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12)));
|
|
|
|
/* set GPIO2 back to LOW */
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
|
|
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
|
|
{
|
|
u8 rc = 0;
|
|
u32 ext_phy_type;
|
|
|
|
DP(NETIF_MSG_LINK, "bnx2x_common_init_phy\n");
|
|
|
|
/* Read the ext_phy_type for arbitrary port(0) */
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(
|
|
REG_RD(bp, shmem_base +
|
|
offsetof(struct shmem_region,
|
|
dev_info.port_hw_config[0].external_phy_config)));
|
|
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
{
|
|
rc = bnx2x_8073_common_init_phy(bp, shmem_base);
|
|
break;
|
|
}
|
|
default:
|
|
DP(NETIF_MSG_LINK,
|
|
"bnx2x_common_init_phy: ext_phy 0x%x not required\n",
|
|
ext_phy_type);
|
|
break;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
|
|
static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
|
|
{
|
|
u16 val, cnt;
|
|
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_7101_RESET, &val);
|
|
|
|
for (cnt = 0; cnt < 10; cnt++) {
|
|
msleep(50);
|
|
/* Writes a self-clearing reset */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_7101_RESET,
|
|
(val | (1<<15)));
|
|
/* Wait for clear */
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_7101_RESET, &val);
|
|
|
|
if ((val & (1<<15)) == 0)
|
|
break;
|
|
}
|
|
}
|
|
#define RESERVED_SIZE 256
|
|
/* max application is 160K bytes - data at end of RAM */
|
|
#define MAX_APP_SIZE (160*1024 - RESERVED_SIZE)
|
|
|
|
/* Header is 14 bytes */
|
|
#define HEADER_SIZE 14
|
|
#define DATA_OFFSET HEADER_SIZE
|
|
|
|
#define SPI_START_TRANSFER(bp, port, ext_phy_addr) \
|
|
bnx2x_cl45_write(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, \
|
|
ext_phy_addr, \
|
|
MDIO_PCS_DEVAD, \
|
|
MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 1)
|
|
|
|
/* Programs an image to DSP's flash via the SPI port*/
|
|
static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
|
|
u8 ext_phy_addr,
|
|
char data[], u32 size)
|
|
{
|
|
const u16 num_trans = size/4; /* 4 bytes can be sent at a time */
|
|
/* Doesn't include last trans!*/
|
|
const u16 last_trans_size = size%4; /* Num bytes on last trans */
|
|
u16 trans_cnt, byte_cnt;
|
|
u32 data_index;
|
|
u16 tmp;
|
|
u16 code_started = 0;
|
|
u16 image_revision1, image_revision2;
|
|
u16 cnt;
|
|
|
|
DP(NETIF_MSG_LINK, "bnx2x_sfx7101_flash_download file_size=%d\n", size);
|
|
/* Going to flash*/
|
|
if ((size-HEADER_SIZE) > MAX_APP_SIZE) {
|
|
/* This very often will be the case, because the image is built
|
|
with 160Kbytes size whereas the total image size must actually
|
|
be 160Kbytes-RESERVED_SIZE */
|
|
DP(NETIF_MSG_LINK, "Warning, file size was %d bytes "
|
|
"truncated to %d bytes\n", size, MAX_APP_SIZE);
|
|
size = MAX_APP_SIZE+HEADER_SIZE;
|
|
}
|
|
DP(NETIF_MSG_LINK, "File version is %c%c\n", data[0x14e], data[0x14f]);
|
|
DP(NETIF_MSG_LINK, " %c%c\n", data[0x150], data[0x151]);
|
|
/* Put the DSP in download mode by setting FLASH_CFG[2] to 1
|
|
and issuing a reset.*/
|
|
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
|
|
MISC_REGISTERS_GPIO_HIGH, port);
|
|
|
|
bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
|
|
|
|
/* wait 0.5 sec */
|
|
for (cnt = 0; cnt < 100; cnt++)
|
|
msleep(5);
|
|
|
|
/* Make sure we can access the DSP
|
|
And it's in the correct mode (waiting for download) */
|
|
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_DSP_ACCESS, &tmp);
|
|
|
|
if (tmp != 0x000A) {
|
|
DP(NETIF_MSG_LINK, "DSP is not in waiting on download mode. "
|
|
"Expected 0x000A, read 0x%04X\n", tmp);
|
|
DP(NETIF_MSG_LINK, "Download failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Mux the SPI interface away from the internal processor */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_MUX, 1);
|
|
|
|
/* Reset the SPI port */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 0);
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_CTRL_ADDR,
|
|
(1<<MDIO_PCS_REG_7101_SPI_RESET_BIT));
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_CTRL_ADDR, 0);
|
|
|
|
/* Erase the flash */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
|
|
1);
|
|
|
|
SPI_START_TRANSFER(bp, port, ext_phy_addr);
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD);
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
|
|
1);
|
|
SPI_START_TRANSFER(bp, port, ext_phy_addr);
|
|
|
|
/* Wait 10 seconds, the maximum time for the erase to complete */
|
|
DP(NETIF_MSG_LINK, "Erasing flash, this takes 10 seconds...\n");
|
|
for (cnt = 0; cnt < 1000; cnt++)
|
|
msleep(10);
|
|
|
|
DP(NETIF_MSG_LINK, "Downloading flash, please wait...\n");
|
|
data_index = 0;
|
|
for (trans_cnt = 0; trans_cnt < num_trans; trans_cnt++) {
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
|
|
1);
|
|
SPI_START_TRANSFER(bp, port, ext_phy_addr);
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD);
|
|
|
|
/* Bits 23-16 of address */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
(data_index>>16));
|
|
/* Bits 15-8 of address */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
(data_index>>8));
|
|
|
|
/* Bits 7-0 of address */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
((u16)data_index));
|
|
|
|
byte_cnt = 0;
|
|
while (byte_cnt < 4 && data_index < size) {
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
data[data_index++]);
|
|
byte_cnt++;
|
|
}
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
|
|
byte_cnt+4);
|
|
|
|
SPI_START_TRANSFER(bp, port, ext_phy_addr);
|
|
msleep(5); /* Wait 5 ms minimum between transs */
|
|
|
|
/* Let the user know something's going on.*/
|
|
/* a pacifier ever 4K */
|
|
if ((data_index % 1023) == 0)
|
|
DP(NETIF_MSG_LINK, "Download %d%%\n", data_index/size);
|
|
}
|
|
|
|
DP(NETIF_MSG_LINK, "\n");
|
|
/* Transfer the last block if there is data remaining */
|
|
if (last_trans_size) {
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD);
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
|
|
1);
|
|
|
|
SPI_START_TRANSFER(bp, port, ext_phy_addr);
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD);
|
|
|
|
/* Bits 23-16 of address */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
(data_index>>16));
|
|
/* Bits 15-8 of address */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
(data_index>>8));
|
|
|
|
/* Bits 7-0 of address */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
((u16)data_index));
|
|
|
|
byte_cnt = 0;
|
|
while (byte_cnt < last_trans_size && data_index < size) {
|
|
/* Bits 7-0 of address */
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_FIFO_ADDR,
|
|
data[data_index++]);
|
|
byte_cnt++;
|
|
}
|
|
|
|
bnx2x_cl45_write(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR,
|
|
byte_cnt+4);
|
|
|
|
SPI_START_TRANSFER(bp, port, ext_phy_addr);
|
|
}
|
|
|
|
/* DSP Remove Download Mode */
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
|
|
MISC_REGISTERS_GPIO_LOW, port);
|
|
|
|
bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
|
|
|
|
/* wait 0.5 sec to allow it to run */
|
|
for (cnt = 0; cnt < 100; cnt++)
|
|
msleep(5);
|
|
|
|
bnx2x_hw_reset(bp, port);
|
|
|
|
for (cnt = 0; cnt < 100; cnt++)
|
|
msleep(5);
|
|
|
|
/* Check that the code is started. In case the download
|
|
checksum failed, the code won't be started. */
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PCS_DEVAD,
|
|
MDIO_PCS_REG_7101_DSP_ACCESS,
|
|
&tmp);
|
|
|
|
code_started = (tmp & (1<<4));
|
|
if (!code_started) {
|
|
DP(NETIF_MSG_LINK, "Download failed. Please check file.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Verify that the file revision is now equal to the image
|
|
revision within the DSP */
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_7101_VER1,
|
|
&image_revision1);
|
|
|
|
bnx2x_cl45_read(bp, port,
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
|
|
ext_phy_addr,
|
|
MDIO_PMA_DEVAD,
|
|
MDIO_PMA_REG_7101_VER2,
|
|
&image_revision2);
|
|
|
|
if (data[0x14e] != (image_revision2&0xFF) ||
|
|
data[0x14f] != ((image_revision2&0xFF00)>>8) ||
|
|
data[0x150] != (image_revision1&0xFF) ||
|
|
data[0x151] != ((image_revision1&0xFF00)>>8)) {
|
|
DP(NETIF_MSG_LINK, "Download failed.\n");
|
|
return -EINVAL;
|
|
}
|
|
DP(NETIF_MSG_LINK, "Download %d%%\n", data_index/size);
|
|
return 0;
|
|
}
|
|
|
|
u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
|
|
u8 driver_loaded, char data[], u32 size)
|
|
{
|
|
u8 rc = 0;
|
|
u32 ext_phy_type;
|
|
u8 ext_phy_addr;
|
|
ext_phy_addr = ((ext_phy_config &
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
|
|
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
|
|
|
|
ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
|
|
|
|
switch (ext_phy_type) {
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
|
|
DP(NETIF_MSG_LINK,
|
|
"Flash download not supported for this ext phy\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
|
|
/* Take ext phy out of reset */
|
|
if (!driver_loaded)
|
|
bnx2x_turn_on_ef(bp, port, ext_phy_addr, ext_phy_type);
|
|
rc = bnx2x_sfx7101_flash_download(bp, port, ext_phy_addr,
|
|
data, size);
|
|
if (!driver_loaded)
|
|
bnx2x_turn_off_sf(bp, port);
|
|
break;
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
|
|
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
|
|
default:
|
|
DP(NETIF_MSG_LINK, "Invalid ext phy type\n");
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
return rc;
|
|
}
|
|
|