linux_dsm_epyc7002/drivers/usb/serial
Jörgen Storvist 4b2c01ad90 USB: serial: option: add Fibocom NL678 series
Added USB serial option driver support for Fibocom NL678 series cellular
module: VID 2cb7 and PIDs 0x0104 and 0x0105.
Reserved network and ADB interfaces.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0104 Rev=03.10
S:  Manufacturer=Fibocom
S:  Product=Fibocom NL678-E Modem
S:  SerialNumber=12345678
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0105 Rev=03.10
S:  Manufacturer=Fibocom
S:  Product=Fibocom NL678-E Modem
S:  SerialNumber=12345678
C:  #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21 16:47:02 +01:00
..
aircable.c
ark3116.c ark3116: switch to ->get_serial() 2018-10-13 00:50:35 -04:00
belkin_sa.c
belkin_sa.h
bus.c
ch341.c USB: serial: ch341: fix type promotion bug in ch341_control_in() 2018-07-04 15:40:54 +02:00
console.c USB: serial: console: fix reported terminal settings 2018-12-05 11:29:10 +01:00
cp210x.c USB-serial updates for v4.19-rc1 2018-07-20 21:47:15 +02:00
cyberjack.c USB: serial: cyberjack: use irqsave() in USB's complete callback 2018-06-26 14:13:53 +02:00
cypress_m8.c USB: serial: cypress_m8: remove set but not used variable 'iflag' 2018-10-05 08:58:42 +02:00
cypress_m8.h
digi_acceleport.c USB: serial: digi_acceleport: rename tty flag variable 2018-06-27 07:59:03 +02:00
empeg.c
ezusb_convert.pl
f81232.c f81232: switch to ->get_serial() 2018-10-13 00:50:35 -04:00
f81534.c USB: serial: f81534: fix reading old/new IC config 2018-11-20 18:25:44 +01:00
ftdi_sio_ids.h
ftdi_sio.c USB: serial: ftdi_sio: use rounding when calculating baud rate divisors 2018-11-23 09:49:37 +01:00
ftdi_sio.h USB: serial: ftdi_sio: add support for FT232R CBUS gpios 2018-10-05 08:57:06 +02:00
garmin_gps.c
generic.c
io_16654.h
io_edgeport.c io_edgeport: switch to ->get_serial() 2018-10-13 00:50:37 -04:00
io_edgeport.h
io_ionsp.h
io_ti.c io_ti: switch to ->get_serial() 2018-10-13 00:50:38 -04:00
io_ti.h USB: serial: io_ti: fix array underflow in completion handler 2018-08-27 11:52:34 +02:00
io_usbvend.h
ipaq.c
ipw.c
ir-usb.c USB: serial: cast sizeof() to int when comparing with error code 2018-06-25 10:34:31 +02:00
iuu_phoenix.c USB: serial: iuu_phoenix: drop redundant input-speed re-encoding 2018-07-16 14:12:11 +02:00
iuu_phoenix.h
Kconfig
keyspan_pda.c USB: serial: keyspan_pda: fix modem-status error handling 2018-07-06 10:32:14 +02:00
keyspan_usa26msg.h
keyspan_usa28msg.h
keyspan_usa49msg.h
keyspan_usa67msg.h
keyspan_usa90msg.h
keyspan.c
kl5kusb105.c USB: serial: kl5kusb105: remove KLSI device id 2018-07-11 10:11:29 +02:00
kl5kusb105.h USB: serial: kl5kusb105: remove KLSI device id 2018-07-11 10:11:29 +02:00
kobil_sct.c USB: serial: kobil_sct: add missing version error handling 2018-07-06 10:42:42 +02:00
kobil_sct.h
Makefile
Makefile-keyspan_pda_fw
mct_u232.c
mct_u232.h
metro-usb.c
mos7720.c mos7720: switch to ->get_serial() 2018-10-13 00:50:38 -04:00
mos7840.c USB: serial: mos7840: remove set but not used variables 'number, serial' 2018-12-10 10:20:44 +01:00
mxuport.c
navman.c
omninet.c
opticon.c opticon: switch to ->get_serial() 2018-10-13 00:50:39 -04:00
option.c USB: serial: option: add Fibocom NL678 series 2018-12-21 16:47:02 +01:00
oti6858.c
oti6858.h
pl2303.c USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays 2018-12-18 10:22:37 +01:00
pl2303.h USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays 2018-12-18 10:22:37 +01:00
qcaux.c
qcserial.c
quatech2.c USB: serial: quatech2: remove set but not used variable 'port_priv' 2018-11-12 10:08:10 +01:00
safe_serial.c
sierra.c USB: serial: sierra: use irqsave() in USB's complete callback 2018-06-26 15:22:25 +02:00
spcp8x5.c
ssu100.c ssu100: switch to ->get_serial() 2018-10-13 00:50:41 -04:00
symbolserial.c USB: serial: symbolserial: use irqsave() in USB's complete callback 2018-06-26 15:25:01 +02:00
ti_usb_3410_5052.c Merge branch 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2018-10-24 14:43:41 +01:00
upd78f0730.c
usb_debug.c
usb_wwan.c usb_wwan: switch to ->[sg]et_serial() 2018-10-13 00:50:42 -04:00
usb-serial-simple.c USB: serial: simple: add Motorola Tetra MTP6550 id 2018-09-24 15:30:16 +02:00
usb-serial.c complete ->[sg]et_serial() switchover 2018-10-13 00:50:43 -04:00
usb-wwan.h usb_wwan: switch to ->[sg]et_serial() 2018-10-13 00:50:42 -04:00
visor.c
visor.h
whiteheat.c whiteheat: switch to ->get_serial() 2018-10-13 00:50:42 -04:00
whiteheat.h
wishbone-serial.c
xsens_mt.c