AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-26 19:35:18 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
b994738bd2
linux_dsm_epyc7002/arch/arm/boot/dts/tegra30-cardhu.dtsi
Thierry Reding 4ec2e60186 ARM: tegra: Add spaces around = in properties 
This seems to have been copied and pasted since the beginning of time,
though only until Tegra124, likely because that DT was written from
scratch or it was fixed along the way.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-07-11 16:46:26 +02:00

651 lines
16 KiB
Plaintext
Raw Blame History

#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
/**
* This file contains common DT entry for all fab version of Cardhu.
* There is multiple fab version of Cardhu starting from A01 to A07.
* Cardhu fab version A01 and A03 are not supported. Cardhu fab version
* A02 will have different sets of GPIOs for fixed regulator compare to
* Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
* compatible with fab version A04. Based on Cardhu fab version, the
* related dts file need to be chosen like for Cardhu fab version A02,
* use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
* tegra30-cardhu-a04.dts.
* The identification of board is done in two ways, by looking the sticker
* on PCB and by reading board id eeprom.
* The sticker will have number like 600-81291-1000-002 C.3. In this 4th
* number is the fab version like here it is 002 and hence fab version A02.
* The (downstream internal) U-Boot of Cardhu display the board-id as
* follows:
* BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
* In this Fab version is 02 i.e. A02.
* The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
* The location 0x8 of this eeprom contains the Fab version. It is 1 byte
* wide.
*/
/ {
model = "NVIDIA Tegra30 Cardhu evaluation board";
compatible = "nvidia,cardhu", "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000d000/tps65911@2d";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartc;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x80000000 0x40000000>;
};
pcie-controller@00003000 {
status = "okay";
/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
avdd-pexb-supply = <&ldo1_reg>;
vdd-pexb-supply = <&ldo1_reg>;
avdd-pex-pll-supply = <&ldo1_reg>;
hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
vddio-pex-ctl-supply = <&sys_3v3_reg>;
avdd-plle-supply = <&ldo2_reg>;
pci@1,0 {
nvidia,num-lanes = <4>;
};
pci@2,0 {
nvidia,num-lanes = <1>;
};
pci@3,0 {
status = "okay";
nvidia,num-lanes = <1>;
};
};
host1x@50000000 {
dc@54200000 {
rgb {
status = "okay";
nvidia,panel = <&panel>;
};
};
};
pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_clk_pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
"sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
dap2_fs_pa2 {
nvidia,pins = "dap2_fs_pa2",
"dap2_sclk_pa3",
"dap2_din_pa4",
"dap2_dout_pa5";
nvidia,function = "i2s1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdio3 {
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
nvidia,pull-down-strength = <46>;
nvidia,pull-up-strength = <42>;
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
};
uart3_txd_pw6 {
nvidia,pins = "uart3_txd_pw6",
"uart3_cts_n_pa1",
"uart3_rts_n_pc0",
"uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
serial@70006000 {
status = "okay";
};
serial@70006200 {
compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
pwm@7000a000 {
status = "okay";
};
panelddc: i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <100000>;
/* ALS and Proximity sensor */
isl29028@44 {
compatible = "isil,isl29028";
reg = <0x44>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
};
i2cmux@70 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
};
};
i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
#gpio-cells = <2>;
gpio-controller;
vcc1-supply = <&vdd_ac_bat_reg>;
vcc2-supply = <&vdd_ac_bat_reg>;
vcc3-supply = <&vio_reg>;
vcc4-supply = <&vdd_5v0_reg>;
vcc5-supply = <&vdd_ac_bat_reg>;
vcc6-supply = <&vdd2_reg>;
vcc7-supply = <&vdd_ac_bat_reg>;
vccio-supply = <&vdd_ac_bat_reg>;
regulators {
vdd1_reg: vdd1 {
regulator-name = "vddio_ddr_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vdd2_reg: vdd2 {
regulator-name = "vdd_1v5_gen";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vddctrl_reg: vddctrl {
regulator-name = "vdd_cpu,vdd_sys";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vio_reg: vio {
regulator-name = "vdd_1v8_gen";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo1_reg: ldo1 {
regulator-name = "vdd_pexa,vdd_pexb";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
ldo2_reg: ldo2 {
regulator-name = "vdd_sata,avdd_plle";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
/* LDO3 is not connected to anything */
ldo4_reg: ldo4 {
regulator-name = "vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo5_reg: ldo5 {
regulator-name = "vddio_sdmmc,avdd_vdac";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo6_reg: ldo6 {
regulator-name = "avdd_dsi_csi,pwrdet_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo7_reg: ldo7 {
regulator-name = "vdd_pllm,x,u,a_p_c_s";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo8_reg: ldo8 {
regulator-name = "vdd_ddr_hs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
};
};
temperature-sensor@4c {
compatible = "onnn,nct1008";
reg = <0x4c>;
vcc-supply = <&sys_3v3_reg>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
};
tps62361@60 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
};
spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@1 {
compatible = "winbond,w25q32";
reg = <1>;
spi-max-frequency = <20000000>;
};
};
pmc@7000e400 {
status = "okay";
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <200>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
};
ahub@70080000 {
i2s@70080400 {
status = "okay";
};
};
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@78000600 {
status = "okay";
bus-width = <8>;
non-removable;
};
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
vbus-supply = <&usb3_vbus_reg>;
status = "okay";
};
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
power-supply = <&vdd_bl_reg>;
pwms = <&pwm 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
panel: panel {
compatible = "chunghwa,claa101wb01", "simple-panel";
ddc-i2c-bus = <&panelddc>;
power-supply = <&vdd_pnl1_reg>;
enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
backlight = <&backlight>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_ac_bat_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vdd_ac_bat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
cam_1v8_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "cam_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
vin-supply = <&vio_reg>;
};
cp_5v_reg: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "cp_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
enable-active-high;
gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
emmc_3v3_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "emmc_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
modem_3v3_reg: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "modem_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
};
pex_hvdd_3v3_reg: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "pex_hvdd_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
vdd_cam1_ldo_reg: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "vdd_cam1_ldo";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
vdd_cam2_ldo_reg: regulator@7 {
compatible = "regulator-fixed";
reg = <7>;
regulator-name = "vdd_cam2_ldo";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
vdd_cam3_ldo_reg: regulator@8 {
compatible = "regulator-fixed";
reg = <8>;
regulator-name = "vdd_cam3_ldo";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
vdd_com_reg: regulator@9 {
compatible = "regulator-fixed";
reg = <9>;
regulator-name = "vdd_com";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
vdd_fuse_3v3_reg: regulator@10 {
compatible = "regulator-fixed";
reg = <10>;
regulator-name = "vdd_fuse_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
vdd_pnl1_reg: regulator@11 {
compatible = "regulator-fixed";
reg = <11>;
regulator-name = "vdd_pnl1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
vdd_vid_reg: regulator@12 {
compatible = "regulator-fixed";
reg = <12>;
regulator-name = "vddio_vid";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
};
sound {
compatible = "nvidia,tegra-audio-wm8903-cardhu",
"nvidia,tegra-audio-wm8903";
nvidia,model = "NVIDIA Tegra Cardhu";
nvidia,audio-routing =
"Headphone Jack", "HPOUTR",
"Headphone Jack", "HPOUTL",
"Int Spk", "ROP",
"Int Spk", "RON",
"Int Spk", "LOP",
"Int Spk", "LON",
"Mic Jack", "MICBIAS",
"IN1L", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
GPIO_ACTIVE_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
<&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA30_CLK_EXTERN1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
interrupt-parent = <&pmic>;
interrupts = <2 0>;
linux,code = <KEY_POWER>;
debounce-interval = <100>;
wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <10>;
};
volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <10>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink