mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
74ba9207e1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
125 lines
4.2 KiB
C
125 lines
4.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/******************************************************************
|
|
* Copyright (c) 2000-2007 PMC-Sierra INC.
|
|
*
|
|
* PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
|
|
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
|
|
* SOFTWARE.
|
|
*/
|
|
#ifndef MSP_USB_H_
|
|
#define MSP_USB_H_
|
|
|
|
#define NUM_USB_DEVS 1
|
|
|
|
/* Register spaces for USB host 0 */
|
|
#define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0)
|
|
#define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17)
|
|
#define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000)
|
|
#define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f)
|
|
#define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100)
|
|
#define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF)
|
|
|
|
/* Register spaces for USB host 1 */
|
|
#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0)
|
|
#define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17)
|
|
#define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000)
|
|
#define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f)
|
|
#define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100)
|
|
#define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff)
|
|
|
|
/* USB Identification registers */
|
|
struct msp_usbid_regs {
|
|
u32 id; /* 0x0: Identification register */
|
|
u32 hwgen; /* 0x4: General HW params */
|
|
u32 hwhost; /* 0x8: Host HW params */
|
|
u32 hwdev; /* 0xc: Device HW params */
|
|
u32 hwtxbuf; /* 0x10: Tx buffer HW params */
|
|
u32 hwrxbuf; /* 0x14: Rx buffer HW params */
|
|
u32 reserved[26];
|
|
u32 timer0_load; /* 0x80: General-purpose timer 0 load*/
|
|
u32 timer0_ctrl; /* 0x84: General-purpose timer 0 control */
|
|
u32 timer1_load; /* 0x88: General-purpose timer 1 load*/
|
|
u32 timer1_ctrl; /* 0x8c: General-purpose timer 1 control */
|
|
};
|
|
|
|
/* MSBus to AMBA registers */
|
|
struct msp_mab_regs {
|
|
u32 isr; /* 0x0: Interrupt status */
|
|
u32 imr; /* 0x4: Interrupt mask */
|
|
u32 thcr0; /* 0x8: Transaction header capture 0 */
|
|
u32 thcr1; /* 0xc: Transaction header capture 1 */
|
|
u32 int_stat; /* 0x10: Interrupt status summary */
|
|
u32 phy_cfg; /* 0x14: USB phy config */
|
|
};
|
|
|
|
/* EHCI registers */
|
|
struct msp_usbhs_regs {
|
|
u32 hciver; /* 0x0: Version and offset to operational regs */
|
|
u32 hcsparams; /* 0x4: Host control structural parameters */
|
|
u32 hccparams; /* 0x8: Host control capability parameters */
|
|
u32 reserved0[5];
|
|
u32 dciver; /* 0x20: Device interface version */
|
|
u32 dccparams; /* 0x24: Device control capability parameters */
|
|
u32 reserved1[6];
|
|
u32 cmd; /* 0x40: USB command */
|
|
u32 sts; /* 0x44: USB status */
|
|
u32 int_ena; /* 0x48: USB interrupt enable */
|
|
u32 frindex; /* 0x4c: Frame index */
|
|
u32 reserved3;
|
|
union {
|
|
struct {
|
|
u32 flb_addr; /* 0x54: Frame list base address */
|
|
u32 next_async_addr; /* 0x58: next asynchronous addr */
|
|
u32 ttctrl; /* 0x5c: embedded transaction translator
|
|
async buffer status */
|
|
u32 burst_size; /* 0x60: Controller burst size */
|
|
u32 tx_fifo_ctrl; /* 0x64: Tx latency FIFO tuning */
|
|
u32 reserved0[4];
|
|
u32 endpt_nak; /* 0x78: Endpoint NAK */
|
|
u32 endpt_nak_ena; /* 0x7c: Endpoint NAK enable */
|
|
u32 cfg_flag; /* 0x80: Config flag */
|
|
u32 port_sc1; /* 0x84: Port status & control 1 */
|
|
u32 reserved1[7];
|
|
u32 otgsc; /* 0xa4: OTG status & control */
|
|
u32 mode; /* 0xa8: USB controller mode */
|
|
} host;
|
|
|
|
struct {
|
|
u32 dev_addr; /* 0x54: Device address */
|
|
u32 endpt_list_addr; /* 0x58: Endpoint list address */
|
|
u32 reserved0[7];
|
|
u32 endpt_nak; /* 0x74 */
|
|
u32 endpt_nak_ctrl; /* 0x78 */
|
|
u32 cfg_flag; /* 0x80 */
|
|
u32 port_sc1; /* 0x84: Port status & control 1 */
|
|
u32 reserved[7];
|
|
u32 otgsc; /* 0xa4: OTG status & control */
|
|
u32 mode; /* 0xa8: USB controller mode */
|
|
u32 endpt_setup_stat; /* 0xac */
|
|
u32 endpt_prime; /* 0xb0 */
|
|
u32 endpt_flush; /* 0xb4 */
|
|
u32 endpt_stat; /* 0xb8 */
|
|
u32 endpt_complete; /* 0xbc */
|
|
u32 endpt_ctrl0; /* 0xc0 */
|
|
u32 endpt_ctrl1; /* 0xc4 */
|
|
u32 endpt_ctrl2; /* 0xc8 */
|
|
u32 endpt_ctrl3; /* 0xcc */
|
|
} device;
|
|
} u;
|
|
};
|
|
/*
|
|
* Container for the more-generic platform_device.
|
|
* This exists mainly as a way to map the non-standard register
|
|
* spaces and make them accessible to the USB ISR.
|
|
*/
|
|
struct mspusb_device {
|
|
struct msp_mab_regs __iomem *mab_regs;
|
|
struct msp_usbid_regs __iomem *usbid_regs;
|
|
struct msp_usbhs_regs __iomem *usbhs_regs;
|
|
struct platform_device dev;
|
|
};
|
|
|
|
#define to_mspusb_device(x) container_of((x), struct mspusb_device, dev)
|
|
#define TO_HOST_ID(x) ((x) & 0x3)
|
|
#endif /*MSP_USB_H_*/
|