linux_dsm_epyc7002/fs/sync.c
Jeff Layton 735e4ae5ba vfs: track per-sb writeback errors and report them to syncfs
Patch series "vfs: have syncfs() return error when there are writeback
errors", v6.

Currently, syncfs does not return errors when one of the inodes fails to
be written back.  It will return errors based on the legacy AS_EIO and
AS_ENOSPC flags when syncing out the block device fails, but that's not
particularly helpful for filesystems that aren't backed by a blockdev.
It's also possible for a stray sync to lose those errors.

The basic idea in this set is to track writeback errors at the
superblock level, so that we can quickly and easily check whether
something bad happened without having to fsync each file individually.
syncfs is then changed to reliably report writeback errors after they
occur, much in the same fashion as fsync does now.

This patch (of 2):

Usually we suggest that applications call fsync when they want to ensure
that all data written to the file has made it to the backing store, but
that can be inefficient when there are a lot of open files.

Calling syncfs on the filesystem can be more efficient in some
situations, but the error reporting doesn't currently work the way most
people expect.  If a single inode on a filesystem reports a writeback
error, syncfs won't necessarily return an error.  syncfs only returns an
error if __sync_blockdev fails, and on some filesystems that's a no-op.

It would be better if syncfs reported an error if there were any
writeback failures.  Then applications could call syncfs to see if there
are any errors on any open files, and could then call fsync on all of
the other descriptors to figure out which one failed.

This patch adds a new errseq_t to struct super_block, and has
mapping_set_error also record writeback errors there.

To report those errors, we also need to keep an errseq_t in struct file
to act as a cursor.  This patch adds a dedicated field for that purpose,
which slots nicely into 4 bytes of padding at the end of struct file on
x86_64.

An earlier version of this patch used an O_PATH file descriptor to cue
the kernel that the open file should track the superblock error and not
the inode's writeback error.

I think that API is just too weird though.  This is simpler and should
make syncfs error reporting "just work" even if someone is multiplexing
fsync and syncfs on the same fds.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20200428135155.19223-1-jlayton@kernel.org
Link: http://lkml.kernel.org/r/20200428135155.19223-2-jlayton@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:05 -07:00

394 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* High-level sync()-related operations
*/
#include <linux/kernel.h>
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/namei.h>
#include <linux/sched.h>
#include <linux/writeback.h>
#include <linux/syscalls.h>
#include <linux/linkage.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
#include <linux/backing-dev.h>
#include "internal.h"
#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
SYNC_FILE_RANGE_WAIT_AFTER)
/*
* Do the filesystem syncing work. For simple filesystems
* writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
* submit IO for these buffers via __sync_blockdev(). This also speeds up the
* wait == 1 case since in that case write_inode() functions do
* sync_dirty_buffer() and thus effectively write one block at a time.
*/
static int __sync_filesystem(struct super_block *sb, int wait)
{
if (wait)
sync_inodes_sb(sb);
else
writeback_inodes_sb(sb, WB_REASON_SYNC);
if (sb->s_op->sync_fs)
sb->s_op->sync_fs(sb, wait);
return __sync_blockdev(sb->s_bdev, wait);
}
/*
* Write out and wait upon all dirty data associated with this
* superblock. Filesystem data as well as the underlying block
* device. Takes the superblock lock.
*/
int sync_filesystem(struct super_block *sb)
{
int ret;
/*
* We need to be protected against the filesystem going from
* r/o to r/w or vice versa.
*/
WARN_ON(!rwsem_is_locked(&sb->s_umount));
/*
* No point in syncing out anything if the filesystem is read-only.
*/
if (sb_rdonly(sb))
return 0;
ret = __sync_filesystem(sb, 0);
if (ret < 0)
return ret;
return __sync_filesystem(sb, 1);
}
EXPORT_SYMBOL(sync_filesystem);
static void sync_inodes_one_sb(struct super_block *sb, void *arg)
{
if (!sb_rdonly(sb))
sync_inodes_sb(sb);
}
static void sync_fs_one_sb(struct super_block *sb, void *arg)
{
if (!sb_rdonly(sb) && sb->s_op->sync_fs)
sb->s_op->sync_fs(sb, *(int *)arg);
}
static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
{
filemap_fdatawrite(bdev->bd_inode->i_mapping);
}
static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
{
/*
* We keep the error status of individual mapping so that
* applications can catch the writeback error using fsync(2).
* See filemap_fdatawait_keep_errors() for details.
*/
filemap_fdatawait_keep_errors(bdev->bd_inode->i_mapping);
}
/*
* Sync everything. We start by waking flusher threads so that most of
* writeback runs on all devices in parallel. Then we sync all inodes reliably
* which effectively also waits for all flusher threads to finish doing
* writeback. At this point all data is on disk so metadata should be stable
* and we tell filesystems to sync their metadata via ->sync_fs() calls.
* Finally, we writeout all block devices because some filesystems (e.g. ext2)
* just write metadata (such as inodes or bitmaps) to block device page cache
* and do not sync it on their own in ->sync_fs().
*/
void ksys_sync(void)
{
int nowait = 0, wait = 1;
wakeup_flusher_threads(WB_REASON_SYNC);
iterate_supers(sync_inodes_one_sb, NULL);
iterate_supers(sync_fs_one_sb, &nowait);
iterate_supers(sync_fs_one_sb, &wait);
iterate_bdevs(fdatawrite_one_bdev, NULL);
iterate_bdevs(fdatawait_one_bdev, NULL);
if (unlikely(laptop_mode))
laptop_sync_completion();
}
SYSCALL_DEFINE0(sync)
{
ksys_sync();
return 0;
}
static void do_sync_work(struct work_struct *work)
{
int nowait = 0;
/*
* Sync twice to reduce the possibility we skipped some inodes / pages
* because they were temporarily locked
*/
iterate_supers(sync_inodes_one_sb, &nowait);
iterate_supers(sync_fs_one_sb, &nowait);
iterate_bdevs(fdatawrite_one_bdev, NULL);
iterate_supers(sync_inodes_one_sb, &nowait);
iterate_supers(sync_fs_one_sb, &nowait);
iterate_bdevs(fdatawrite_one_bdev, NULL);
printk("Emergency Sync complete\n");
kfree(work);
}
void emergency_sync(void)
{
struct work_struct *work;
work = kmalloc(sizeof(*work), GFP_ATOMIC);
if (work) {
INIT_WORK(work, do_sync_work);
schedule_work(work);
}
}
/*
* sync a single super
*/
SYSCALL_DEFINE1(syncfs, int, fd)
{
struct fd f = fdget(fd);
struct super_block *sb;
int ret, ret2;
if (!f.file)
return -EBADF;
sb = f.file->f_path.dentry->d_sb;
down_read(&sb->s_umount);
ret = sync_filesystem(sb);
up_read(&sb->s_umount);
ret2 = errseq_check_and_advance(&sb->s_wb_err, &f.file->f_sb_err);
fdput(f);
return ret ? ret : ret2;
}
/**
* vfs_fsync_range - helper to sync a range of data & metadata to disk
* @file: file to sync
* @start: offset in bytes of the beginning of data range to sync
* @end: offset in bytes of the end of data range (inclusive)
* @datasync: perform only datasync
*
* Write back data in range @start..@end and metadata for @file to disk. If
* @datasync is set only metadata needed to access modified file data is
* written.
*/
int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
{
struct inode *inode = file->f_mapping->host;
if (!file->f_op->fsync)
return -EINVAL;
if (!datasync && (inode->i_state & I_DIRTY_TIME))
mark_inode_dirty_sync(inode);
return file->f_op->fsync(file, start, end, datasync);
}
EXPORT_SYMBOL(vfs_fsync_range);
/**
* vfs_fsync - perform a fsync or fdatasync on a file
* @file: file to sync
* @datasync: only perform a fdatasync operation
*
* Write back data and metadata for @file to disk. If @datasync is
* set only metadata needed to access modified file data is written.
*/
int vfs_fsync(struct file *file, int datasync)
{
return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
}
EXPORT_SYMBOL(vfs_fsync);
static int do_fsync(unsigned int fd, int datasync)
{
struct fd f = fdget(fd);
int ret = -EBADF;
if (f.file) {
ret = vfs_fsync(f.file, datasync);
fdput(f);
}
return ret;
}
SYSCALL_DEFINE1(fsync, unsigned int, fd)
{
return do_fsync(fd, 0);
}
SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
{
return do_fsync(fd, 1);
}
int sync_file_range(struct file *file, loff_t offset, loff_t nbytes,
unsigned int flags)
{
int ret;
struct address_space *mapping;
loff_t endbyte; /* inclusive */
umode_t i_mode;
ret = -EINVAL;
if (flags & ~VALID_FLAGS)
goto out;
endbyte = offset + nbytes;
if ((s64)offset < 0)
goto out;
if ((s64)endbyte < 0)
goto out;
if (endbyte < offset)
goto out;
if (sizeof(pgoff_t) == 4) {
if (offset >= (0x100000000ULL << PAGE_SHIFT)) {
/*
* The range starts outside a 32 bit machine's
* pagecache addressing capabilities. Let it "succeed"
*/
ret = 0;
goto out;
}
if (endbyte >= (0x100000000ULL << PAGE_SHIFT)) {
/*
* Out to EOF
*/
nbytes = 0;
}
}
if (nbytes == 0)
endbyte = LLONG_MAX;
else
endbyte--; /* inclusive */
i_mode = file_inode(file)->i_mode;
ret = -ESPIPE;
if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
!S_ISLNK(i_mode))
goto out;
mapping = file->f_mapping;
ret = 0;
if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
ret = file_fdatawait_range(file, offset, endbyte);
if (ret < 0)
goto out;
}
if (flags & SYNC_FILE_RANGE_WRITE) {
int sync_mode = WB_SYNC_NONE;
if ((flags & SYNC_FILE_RANGE_WRITE_AND_WAIT) ==
SYNC_FILE_RANGE_WRITE_AND_WAIT)
sync_mode = WB_SYNC_ALL;
ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
sync_mode);
if (ret < 0)
goto out;
}
if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
ret = file_fdatawait_range(file, offset, endbyte);
out:
return ret;
}
/*
* ksys_sync_file_range() permits finely controlled syncing over a segment of
* a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
* zero then ksys_sync_file_range() will operate from offset out to EOF.
*
* The flag bits are:
*
* SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
* before performing the write.
*
* SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
* range which are not presently under writeback. Note that this may block for
* significant periods due to exhaustion of disk request structures.
*
* SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
* after performing the write.
*
* Useful combinations of the flag bits are:
*
* SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
* in the range which were dirty on entry to ksys_sync_file_range() are placed
* under writeout. This is a start-write-for-data-integrity operation.
*
* SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
* are not presently under writeout. This is an asynchronous flush-to-disk
* operation. Not suitable for data integrity operations.
*
* SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
* completion of writeout of all pages in the range. This will be used after an
* earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
* for that operation to complete and to return the result.
*
* SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER
* (a.k.a. SYNC_FILE_RANGE_WRITE_AND_WAIT):
* a traditional sync() operation. This is a write-for-data-integrity operation
* which will ensure that all pages in the range which were dirty on entry to
* ksys_sync_file_range() are written to disk. It should be noted that disk
* caches are not flushed by this call, so there are no guarantees here that the
* data will be available on disk after a crash.
*
*
* SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
* I/O errors or ENOSPC conditions and will return those to the caller, after
* clearing the EIO and ENOSPC flags in the address_space.
*
* It should be noted that none of these operations write out the file's
* metadata. So unless the application is strictly performing overwrites of
* already-instantiated disk blocks, there are no guarantees here that the data
* will be available after a crash.
*/
int ksys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
unsigned int flags)
{
int ret;
struct fd f;
ret = -EBADF;
f = fdget(fd);
if (f.file)
ret = sync_file_range(f.file, offset, nbytes, flags);
fdput(f);
return ret;
}
SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes,
unsigned int, flags)
{
return ksys_sync_file_range(fd, offset, nbytes, flags);
}
/* It would be nice if people remember that not all the world's an i386
when they introduce new system calls */
SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags,
loff_t, offset, loff_t, nbytes)
{
return ksys_sync_file_range(fd, offset, nbytes, flags);
}