mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 16:50:54 +07:00
ad67971202
The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital converter (ADC). It is optimized for high performanceover wide bandwidths and ease of use. The product operates at a 250 MSPS conversion rate and is designed for wireless receivers, instrumentation, and test equipment that require a high dynamic range. The ADC requires 1.8 V and 3.3 V power supplies and a low voltage differential input clock for full performance operation. No external reference or driver components are required for many applications. Data outputs are LVDS compatible (ANSI-644 compatible) and include the means to reduce the overall current needed for short trace distances. Since the chip can operate at such high sample-rates (much higher than classical interfaces), it requires that a DMA controller be used to interface directly to the chip and push data into memory. Typically, the AXI ADC IP core is used to interface with it. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
423 lines
10 KiB
C
423 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Analog Devices AD9467 SPI ADC driver
|
|
*
|
|
* Copyright 2012-2020 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/of_device.h>
|
|
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/iio/adc/adi-axi-adc.h>
|
|
|
|
/*
|
|
* ADI High-Speed ADC common spi interface registers
|
|
* See Application-Note AN-877:
|
|
* https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
|
|
*/
|
|
|
|
#define AN877_ADC_REG_CHIP_PORT_CONF 0x00
|
|
#define AN877_ADC_REG_CHIP_ID 0x01
|
|
#define AN877_ADC_REG_CHIP_GRADE 0x02
|
|
#define AN877_ADC_REG_CHAN_INDEX 0x05
|
|
#define AN877_ADC_REG_TRANSFER 0xFF
|
|
#define AN877_ADC_REG_MODES 0x08
|
|
#define AN877_ADC_REG_TEST_IO 0x0D
|
|
#define AN877_ADC_REG_ADC_INPUT 0x0F
|
|
#define AN877_ADC_REG_OFFSET 0x10
|
|
#define AN877_ADC_REG_OUTPUT_MODE 0x14
|
|
#define AN877_ADC_REG_OUTPUT_ADJUST 0x15
|
|
#define AN877_ADC_REG_OUTPUT_PHASE 0x16
|
|
#define AN877_ADC_REG_OUTPUT_DELAY 0x17
|
|
#define AN877_ADC_REG_VREF 0x18
|
|
#define AN877_ADC_REG_ANALOG_INPUT 0x2C
|
|
|
|
/* AN877_ADC_REG_TEST_IO */
|
|
#define AN877_ADC_TESTMODE_OFF 0x0
|
|
#define AN877_ADC_TESTMODE_MIDSCALE_SHORT 0x1
|
|
#define AN877_ADC_TESTMODE_POS_FULLSCALE 0x2
|
|
#define AN877_ADC_TESTMODE_NEG_FULLSCALE 0x3
|
|
#define AN877_ADC_TESTMODE_ALT_CHECKERBOARD 0x4
|
|
#define AN877_ADC_TESTMODE_PN23_SEQ 0x5
|
|
#define AN877_ADC_TESTMODE_PN9_SEQ 0x6
|
|
#define AN877_ADC_TESTMODE_ONE_ZERO_TOGGLE 0x7
|
|
#define AN877_ADC_TESTMODE_USER 0x8
|
|
#define AN877_ADC_TESTMODE_BIT_TOGGLE 0x9
|
|
#define AN877_ADC_TESTMODE_SYNC 0xA
|
|
#define AN877_ADC_TESTMODE_ONE_BIT_HIGH 0xB
|
|
#define AN877_ADC_TESTMODE_MIXED_BIT_FREQUENCY 0xC
|
|
#define AN877_ADC_TESTMODE_RAMP 0xF
|
|
|
|
/* AN877_ADC_REG_TRANSFER */
|
|
#define AN877_ADC_TRANSFER_SYNC 0x1
|
|
|
|
/* AN877_ADC_REG_OUTPUT_MODE */
|
|
#define AN877_ADC_OUTPUT_MODE_OFFSET_BINARY 0x0
|
|
#define AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT 0x1
|
|
#define AN877_ADC_OUTPUT_MODE_GRAY_CODE 0x2
|
|
|
|
/* AN877_ADC_REG_OUTPUT_PHASE */
|
|
#define AN877_ADC_OUTPUT_EVEN_ODD_MODE_EN 0x20
|
|
#define AN877_ADC_INVERT_DCO_CLK 0x80
|
|
|
|
/* AN877_ADC_REG_OUTPUT_DELAY */
|
|
#define AN877_ADC_DCO_DELAY_ENABLE 0x80
|
|
|
|
/*
|
|
* Analog Devices AD9467 16-Bit, 200/250 MSPS ADC
|
|
*/
|
|
|
|
#define CHIPID_AD9467 0x50
|
|
#define AD9467_DEF_OUTPUT_MODE 0x08
|
|
#define AD9467_REG_VREF_MASK 0x0F
|
|
|
|
enum {
|
|
ID_AD9467,
|
|
};
|
|
|
|
struct ad9467_state {
|
|
struct spi_device *spi;
|
|
struct clk *clk;
|
|
unsigned int output_mode;
|
|
|
|
struct gpio_desc *pwrdown_gpio;
|
|
struct gpio_desc *reset_gpio;
|
|
};
|
|
|
|
static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
|
|
{
|
|
unsigned char tbuf[2], rbuf[1];
|
|
int ret;
|
|
|
|
tbuf[0] = 0x80 | (reg >> 8);
|
|
tbuf[1] = reg & 0xFF;
|
|
|
|
ret = spi_write_then_read(spi,
|
|
tbuf, ARRAY_SIZE(tbuf),
|
|
rbuf, ARRAY_SIZE(rbuf));
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return rbuf[0];
|
|
}
|
|
|
|
static int ad9467_spi_write(struct spi_device *spi, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
unsigned char buf[3];
|
|
|
|
buf[0] = reg >> 8;
|
|
buf[1] = reg & 0xFF;
|
|
buf[2] = val;
|
|
|
|
return spi_write(spi, buf, ARRAY_SIZE(buf));
|
|
}
|
|
|
|
static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
|
|
unsigned int writeval, unsigned int *readval)
|
|
{
|
|
struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
|
|
struct spi_device *spi = st->spi;
|
|
int ret;
|
|
|
|
if (readval == NULL) {
|
|
ret = ad9467_spi_write(spi, reg, writeval);
|
|
ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
|
|
AN877_ADC_TRANSFER_SYNC);
|
|
return ret;
|
|
}
|
|
|
|
ret = ad9467_spi_read(spi, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
*readval = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const unsigned int ad9467_scale_table[][2] = {
|
|
{2000, 0}, {2100, 6}, {2200, 7},
|
|
{2300, 8}, {2400, 9}, {2500, 10},
|
|
};
|
|
|
|
static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index,
|
|
unsigned int *val, unsigned int *val2)
|
|
{
|
|
const struct adi_axi_adc_chip_info *info = conv->chip_info;
|
|
const struct iio_chan_spec *chan = &info->channels[0];
|
|
unsigned int tmp;
|
|
|
|
tmp = (info->scale_table[index][0] * 1000000ULL) >>
|
|
chan->scan_type.realbits;
|
|
*val = tmp / 1000000;
|
|
*val2 = tmp % 1000000;
|
|
}
|
|
|
|
#define AD9467_CHAN(_chan, _si, _bits, _sign) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = _chan, \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.scan_index = _si, \
|
|
.scan_type = { \
|
|
.sign = _sign, \
|
|
.realbits = _bits, \
|
|
.storagebits = 16, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec ad9467_channels[] = {
|
|
AD9467_CHAN(0, 0, 16, 'S'),
|
|
};
|
|
|
|
static const struct adi_axi_adc_chip_info ad9467_chip_tbl[] = {
|
|
[ID_AD9467] = {
|
|
.id = CHIPID_AD9467,
|
|
.max_rate = 250000000UL,
|
|
.scale_table = ad9467_scale_table,
|
|
.num_scales = ARRAY_SIZE(ad9467_scale_table),
|
|
.channels = ad9467_channels,
|
|
.num_channels = ARRAY_SIZE(ad9467_channels),
|
|
},
|
|
};
|
|
|
|
static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
|
|
{
|
|
const struct adi_axi_adc_chip_info *info = conv->chip_info;
|
|
struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
|
|
unsigned int i, vref_val, vref_mask;
|
|
|
|
vref_val = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF);
|
|
|
|
switch (info->id) {
|
|
case CHIPID_AD9467:
|
|
vref_mask = AD9467_REG_VREF_MASK;
|
|
break;
|
|
default:
|
|
vref_mask = 0xFFFF;
|
|
break;
|
|
}
|
|
|
|
vref_val &= vref_mask;
|
|
|
|
for (i = 0; i < info->num_scales; i++) {
|
|
if (vref_val == info->scale_table[i][1])
|
|
break;
|
|
}
|
|
|
|
if (i == info->num_scales)
|
|
return -ERANGE;
|
|
|
|
__ad9467_get_scale(conv, i, val, val2);
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
|
|
static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
|
|
{
|
|
const struct adi_axi_adc_chip_info *info = conv->chip_info;
|
|
struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
|
|
unsigned int scale_val[2];
|
|
unsigned int i;
|
|
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < info->num_scales; i++) {
|
|
__ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]);
|
|
if (scale_val[0] != val || scale_val[1] != val2)
|
|
continue;
|
|
|
|
ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
|
|
info->scale_table[i][1]);
|
|
ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER,
|
|
AN877_ADC_TRANSFER_SYNC);
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ad9467_read_raw(struct adi_axi_adc_conv *conv,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long m)
|
|
{
|
|
struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
return ad9467_get_scale(conv, val, val2);
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = clk_get_rate(st->clk);
|
|
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
const struct adi_axi_adc_chip_info *info = conv->chip_info;
|
|
struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
|
|
long r_clk;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
return ad9467_set_scale(conv, val, val2);
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
r_clk = clk_round_rate(st->clk, val);
|
|
if (r_clk < 0 || r_clk > info->max_rate) {
|
|
dev_warn(&st->spi->dev,
|
|
"Error setting ADC sample rate %ld", r_clk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return clk_set_rate(st->clk, r_clk);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
|
|
{
|
|
int ret;
|
|
|
|
ret = ad9467_spi_write(spi, AN877_ADC_REG_OUTPUT_MODE, mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER,
|
|
AN877_ADC_TRANSFER_SYNC);
|
|
}
|
|
|
|
static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
|
|
{
|
|
struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
|
|
|
|
return ad9467_outputmode_set(st->spi, st->output_mode);
|
|
}
|
|
|
|
static int ad9467_setup(struct ad9467_state *st, unsigned int chip_id)
|
|
{
|
|
switch (chip_id) {
|
|
case CHIPID_AD9467:
|
|
st->output_mode = AD9467_DEF_OUTPUT_MODE |
|
|
AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void ad9467_clk_disable(void *data)
|
|
{
|
|
struct ad9467_state *st = data;
|
|
|
|
clk_disable_unprepare(st->clk);
|
|
}
|
|
|
|
static int ad9467_probe(struct spi_device *spi)
|
|
{
|
|
const struct adi_axi_adc_chip_info *info;
|
|
struct adi_axi_adc_conv *conv;
|
|
struct ad9467_state *st;
|
|
unsigned int id;
|
|
int ret;
|
|
|
|
info = of_device_get_match_data(&spi->dev);
|
|
if (!info)
|
|
return -ENODEV;
|
|
|
|
conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st));
|
|
if (IS_ERR(conv))
|
|
return PTR_ERR(conv);
|
|
|
|
st = adi_axi_adc_conv_priv(conv);
|
|
st->spi = spi;
|
|
|
|
st->clk = devm_clk_get(&spi->dev, "adc-clk");
|
|
if (IS_ERR(st->clk))
|
|
return PTR_ERR(st->clk);
|
|
|
|
ret = clk_prepare_enable(st->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(st->pwrdown_gpio))
|
|
return PTR_ERR(st->pwrdown_gpio);
|
|
|
|
st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(st->reset_gpio))
|
|
return PTR_ERR(st->reset_gpio);
|
|
|
|
if (st->reset_gpio) {
|
|
udelay(1);
|
|
ret = gpiod_direction_output(st->reset_gpio, 1);
|
|
if (ret)
|
|
return ret;
|
|
mdelay(10);
|
|
}
|
|
|
|
spi_set_drvdata(spi, st);
|
|
|
|
conv->chip_info = info;
|
|
|
|
id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID);
|
|
if (id != conv->chip_info->id) {
|
|
dev_err(&spi->dev, "Unrecognized CHIP_ID 0x%X\n", id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
conv->reg_access = ad9467_reg_access;
|
|
conv->write_raw = ad9467_write_raw;
|
|
conv->read_raw = ad9467_read_raw;
|
|
conv->preenable_setup = ad9467_preenable_setup;
|
|
|
|
return ad9467_setup(st, id);
|
|
}
|
|
|
|
static const struct of_device_id ad9467_of_match[] = {
|
|
{ .compatible = "adi,ad9467", .data = &ad9467_chip_tbl[ID_AD9467], },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ad9467_of_match);
|
|
|
|
static struct spi_driver ad9467_driver = {
|
|
.driver = {
|
|
.name = "ad9467",
|
|
.of_match_table = ad9467_of_match,
|
|
},
|
|
.probe = ad9467_probe,
|
|
};
|
|
module_spi_driver(ad9467_driver);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|