mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 09:10:21 +07:00
709583e894
input_register_device already sets the EV_SYN event since all devices can generate them. Remove the redundant affectation. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1157 lines
27 KiB
C
1157 lines
27 KiB
C
/*
|
|
* Copyright (C) 2012 Simon Budig, <simon.budig@kernelconcepts.de>
|
|
* Daniel Wagener <daniel.wagener@kernelconcepts.de> (M09 firmware support)
|
|
* Lothar Waßmann <LW@KARO-electronics.de> (DT support)
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* This is a driver for the EDT "Polytouch" family of touch controllers
|
|
* based on the FocalTech FT5x06 line of chips.
|
|
*
|
|
* Development of this driver has been sponsored by Glyn:
|
|
* http://www.glyn.com/Products/Displays
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ratelimit.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/input/touchscreen.h>
|
|
#include <linux/input/edt-ft5x06.h>
|
|
|
|
#define MAX_SUPPORT_POINTS 5
|
|
|
|
#define WORK_REGISTER_THRESHOLD 0x00
|
|
#define WORK_REGISTER_REPORT_RATE 0x08
|
|
#define WORK_REGISTER_GAIN 0x30
|
|
#define WORK_REGISTER_OFFSET 0x31
|
|
#define WORK_REGISTER_NUM_X 0x33
|
|
#define WORK_REGISTER_NUM_Y 0x34
|
|
|
|
#define M09_REGISTER_THRESHOLD 0x80
|
|
#define M09_REGISTER_GAIN 0x92
|
|
#define M09_REGISTER_OFFSET 0x93
|
|
#define M09_REGISTER_NUM_X 0x94
|
|
#define M09_REGISTER_NUM_Y 0x95
|
|
|
|
#define NO_REGISTER 0xff
|
|
|
|
#define WORK_REGISTER_OPMODE 0x3c
|
|
#define FACTORY_REGISTER_OPMODE 0x01
|
|
|
|
#define TOUCH_EVENT_DOWN 0x00
|
|
#define TOUCH_EVENT_UP 0x01
|
|
#define TOUCH_EVENT_ON 0x02
|
|
#define TOUCH_EVENT_RESERVED 0x03
|
|
|
|
#define EDT_NAME_LEN 23
|
|
#define EDT_SWITCH_MODE_RETRIES 10
|
|
#define EDT_SWITCH_MODE_DELAY 5 /* msec */
|
|
#define EDT_RAW_DATA_RETRIES 100
|
|
#define EDT_RAW_DATA_DELAY 1 /* msec */
|
|
|
|
enum edt_ver {
|
|
M06,
|
|
M09,
|
|
};
|
|
|
|
struct edt_reg_addr {
|
|
int reg_threshold;
|
|
int reg_report_rate;
|
|
int reg_gain;
|
|
int reg_offset;
|
|
int reg_num_x;
|
|
int reg_num_y;
|
|
};
|
|
|
|
struct edt_ft5x06_ts_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
u16 num_x;
|
|
u16 num_y;
|
|
|
|
int reset_pin;
|
|
int irq_pin;
|
|
int wake_pin;
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
struct dentry *debug_dir;
|
|
u8 *raw_buffer;
|
|
size_t raw_bufsize;
|
|
#endif
|
|
|
|
struct mutex mutex;
|
|
bool factory_mode;
|
|
int threshold;
|
|
int gain;
|
|
int offset;
|
|
int report_rate;
|
|
|
|
char name[EDT_NAME_LEN];
|
|
|
|
struct edt_reg_addr reg_addr;
|
|
enum edt_ver version;
|
|
};
|
|
|
|
static int edt_ft5x06_ts_readwrite(struct i2c_client *client,
|
|
u16 wr_len, u8 *wr_buf,
|
|
u16 rd_len, u8 *rd_buf)
|
|
{
|
|
struct i2c_msg wrmsg[2];
|
|
int i = 0;
|
|
int ret;
|
|
|
|
if (wr_len) {
|
|
wrmsg[i].addr = client->addr;
|
|
wrmsg[i].flags = 0;
|
|
wrmsg[i].len = wr_len;
|
|
wrmsg[i].buf = wr_buf;
|
|
i++;
|
|
}
|
|
if (rd_len) {
|
|
wrmsg[i].addr = client->addr;
|
|
wrmsg[i].flags = I2C_M_RD;
|
|
wrmsg[i].len = rd_len;
|
|
wrmsg[i].buf = rd_buf;
|
|
i++;
|
|
}
|
|
|
|
ret = i2c_transfer(client->adapter, wrmsg, i);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret != i)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool edt_ft5x06_ts_check_crc(struct edt_ft5x06_ts_data *tsdata,
|
|
u8 *buf, int buflen)
|
|
{
|
|
int i;
|
|
u8 crc = 0;
|
|
|
|
for (i = 0; i < buflen - 1; i++)
|
|
crc ^= buf[i];
|
|
|
|
if (crc != buf[buflen-1]) {
|
|
dev_err_ratelimited(&tsdata->client->dev,
|
|
"crc error: 0x%02x expected, got 0x%02x\n",
|
|
crc, buf[buflen-1]);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
|
|
{
|
|
struct edt_ft5x06_ts_data *tsdata = dev_id;
|
|
struct device *dev = &tsdata->client->dev;
|
|
u8 cmd;
|
|
u8 rdbuf[29];
|
|
int i, type, x, y, id;
|
|
int offset, tplen, datalen;
|
|
int error;
|
|
|
|
switch (tsdata->version) {
|
|
case M06:
|
|
cmd = 0xf9; /* tell the controller to send touch data */
|
|
offset = 5; /* where the actual touch data starts */
|
|
tplen = 4; /* data comes in so called frames */
|
|
datalen = 26; /* how much bytes to listen for */
|
|
break;
|
|
|
|
case M09:
|
|
cmd = 0x02;
|
|
offset = 1;
|
|
tplen = 6;
|
|
datalen = 29;
|
|
break;
|
|
|
|
default:
|
|
goto out;
|
|
}
|
|
|
|
memset(rdbuf, 0, sizeof(rdbuf));
|
|
|
|
error = edt_ft5x06_ts_readwrite(tsdata->client,
|
|
sizeof(cmd), &cmd,
|
|
datalen, rdbuf);
|
|
if (error) {
|
|
dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
|
|
error);
|
|
goto out;
|
|
}
|
|
|
|
/* M09 does not send header or CRC */
|
|
if (tsdata->version == M06) {
|
|
if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa ||
|
|
rdbuf[2] != datalen) {
|
|
dev_err_ratelimited(dev,
|
|
"Unexpected header: %02x%02x%02x!\n",
|
|
rdbuf[0], rdbuf[1], rdbuf[2]);
|
|
goto out;
|
|
}
|
|
|
|
if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, datalen))
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < MAX_SUPPORT_POINTS; i++) {
|
|
u8 *buf = &rdbuf[i * tplen + offset];
|
|
bool down;
|
|
|
|
type = buf[0] >> 6;
|
|
/* ignore Reserved events */
|
|
if (type == TOUCH_EVENT_RESERVED)
|
|
continue;
|
|
|
|
/* M06 sometimes sends bogus coordinates in TOUCH_DOWN */
|
|
if (tsdata->version == M06 && type == TOUCH_EVENT_DOWN)
|
|
continue;
|
|
|
|
x = ((buf[0] << 8) | buf[1]) & 0x0fff;
|
|
y = ((buf[2] << 8) | buf[3]) & 0x0fff;
|
|
id = (buf[2] >> 4) & 0x0f;
|
|
down = type != TOUCH_EVENT_UP;
|
|
|
|
input_mt_slot(tsdata->input, id);
|
|
input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER, down);
|
|
|
|
if (!down)
|
|
continue;
|
|
|
|
input_report_abs(tsdata->input, ABS_MT_POSITION_X, x);
|
|
input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y);
|
|
}
|
|
|
|
input_mt_report_pointer_emulation(tsdata->input, true);
|
|
input_sync(tsdata->input);
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
|
|
u8 addr, u8 value)
|
|
{
|
|
u8 wrbuf[4];
|
|
|
|
switch (tsdata->version) {
|
|
case M06:
|
|
wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
|
|
wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
|
|
wrbuf[2] = value;
|
|
wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
|
|
return edt_ft5x06_ts_readwrite(tsdata->client, 4,
|
|
wrbuf, 0, NULL);
|
|
case M09:
|
|
wrbuf[0] = addr;
|
|
wrbuf[1] = value;
|
|
|
|
return edt_ft5x06_ts_readwrite(tsdata->client, 2,
|
|
wrbuf, 0, NULL);
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
|
|
u8 addr)
|
|
{
|
|
u8 wrbuf[2], rdbuf[2];
|
|
int error;
|
|
|
|
switch (tsdata->version) {
|
|
case M06:
|
|
wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
|
|
wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
|
|
wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40;
|
|
|
|
error = edt_ft5x06_ts_readwrite(tsdata->client, 2, wrbuf, 2,
|
|
rdbuf);
|
|
if (error)
|
|
return error;
|
|
|
|
if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) {
|
|
dev_err(&tsdata->client->dev,
|
|
"crc error: 0x%02x expected, got 0x%02x\n",
|
|
wrbuf[0] ^ wrbuf[1] ^ rdbuf[0],
|
|
rdbuf[1]);
|
|
return -EIO;
|
|
}
|
|
break;
|
|
|
|
case M09:
|
|
wrbuf[0] = addr;
|
|
error = edt_ft5x06_ts_readwrite(tsdata->client, 1,
|
|
wrbuf, 1, rdbuf);
|
|
if (error)
|
|
return error;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return rdbuf[0];
|
|
}
|
|
|
|
struct edt_ft5x06_attribute {
|
|
struct device_attribute dattr;
|
|
size_t field_offset;
|
|
u8 limit_low;
|
|
u8 limit_high;
|
|
u8 addr_m06;
|
|
u8 addr_m09;
|
|
};
|
|
|
|
#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09, \
|
|
_limit_low, _limit_high) \
|
|
struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = { \
|
|
.dattr = __ATTR(_field, _mode, \
|
|
edt_ft5x06_setting_show, \
|
|
edt_ft5x06_setting_store), \
|
|
.field_offset = offsetof(struct edt_ft5x06_ts_data, _field), \
|
|
.addr_m06 = _addr_m06, \
|
|
.addr_m09 = _addr_m09, \
|
|
.limit_low = _limit_low, \
|
|
.limit_high = _limit_high, \
|
|
}
|
|
|
|
static ssize_t edt_ft5x06_setting_show(struct device *dev,
|
|
struct device_attribute *dattr,
|
|
char *buf)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
|
|
struct edt_ft5x06_attribute *attr =
|
|
container_of(dattr, struct edt_ft5x06_attribute, dattr);
|
|
u8 *field = (u8 *)tsdata + attr->field_offset;
|
|
int val;
|
|
size_t count = 0;
|
|
int error = 0;
|
|
u8 addr;
|
|
|
|
mutex_lock(&tsdata->mutex);
|
|
|
|
if (tsdata->factory_mode) {
|
|
error = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
switch (tsdata->version) {
|
|
case M06:
|
|
addr = attr->addr_m06;
|
|
break;
|
|
|
|
case M09:
|
|
addr = attr->addr_m09;
|
|
break;
|
|
|
|
default:
|
|
error = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
if (addr != NO_REGISTER) {
|
|
val = edt_ft5x06_register_read(tsdata, addr);
|
|
if (val < 0) {
|
|
error = val;
|
|
dev_err(&tsdata->client->dev,
|
|
"Failed to fetch attribute %s, error %d\n",
|
|
dattr->attr.name, error);
|
|
goto out;
|
|
}
|
|
} else {
|
|
val = *field;
|
|
}
|
|
|
|
if (val != *field) {
|
|
dev_warn(&tsdata->client->dev,
|
|
"%s: read (%d) and stored value (%d) differ\n",
|
|
dattr->attr.name, val, *field);
|
|
*field = val;
|
|
}
|
|
|
|
count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
|
|
out:
|
|
mutex_unlock(&tsdata->mutex);
|
|
return error ?: count;
|
|
}
|
|
|
|
static ssize_t edt_ft5x06_setting_store(struct device *dev,
|
|
struct device_attribute *dattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
|
|
struct edt_ft5x06_attribute *attr =
|
|
container_of(dattr, struct edt_ft5x06_attribute, dattr);
|
|
u8 *field = (u8 *)tsdata + attr->field_offset;
|
|
unsigned int val;
|
|
int error;
|
|
u8 addr;
|
|
|
|
mutex_lock(&tsdata->mutex);
|
|
|
|
if (tsdata->factory_mode) {
|
|
error = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
error = kstrtouint(buf, 0, &val);
|
|
if (error)
|
|
goto out;
|
|
|
|
if (val < attr->limit_low || val > attr->limit_high) {
|
|
error = -ERANGE;
|
|
goto out;
|
|
}
|
|
|
|
switch (tsdata->version) {
|
|
case M06:
|
|
addr = attr->addr_m06;
|
|
break;
|
|
|
|
case M09:
|
|
addr = attr->addr_m09;
|
|
break;
|
|
|
|
default:
|
|
error = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
if (addr != NO_REGISTER) {
|
|
error = edt_ft5x06_register_write(tsdata, addr, val);
|
|
if (error) {
|
|
dev_err(&tsdata->client->dev,
|
|
"Failed to update attribute %s, error: %d\n",
|
|
dattr->attr.name, error);
|
|
goto out;
|
|
}
|
|
}
|
|
*field = val;
|
|
|
|
out:
|
|
mutex_unlock(&tsdata->mutex);
|
|
return error ?: count;
|
|
}
|
|
|
|
static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN,
|
|
M09_REGISTER_GAIN, 0, 31);
|
|
static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET,
|
|
M09_REGISTER_OFFSET, 0, 31);
|
|
static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
|
|
M09_REGISTER_THRESHOLD, 20, 80);
|
|
static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
|
|
NO_REGISTER, 3, 14);
|
|
|
|
static struct attribute *edt_ft5x06_attrs[] = {
|
|
&edt_ft5x06_attr_gain.dattr.attr,
|
|
&edt_ft5x06_attr_offset.dattr.attr,
|
|
&edt_ft5x06_attr_threshold.dattr.attr,
|
|
&edt_ft5x06_attr_report_rate.dattr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group edt_ft5x06_attr_group = {
|
|
.attrs = edt_ft5x06_attrs,
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
struct i2c_client *client = tsdata->client;
|
|
int retries = EDT_SWITCH_MODE_RETRIES;
|
|
int ret;
|
|
int error;
|
|
|
|
disable_irq(client->irq);
|
|
|
|
if (!tsdata->raw_buffer) {
|
|
tsdata->raw_bufsize = tsdata->num_x * tsdata->num_y *
|
|
sizeof(u16);
|
|
tsdata->raw_buffer = kzalloc(tsdata->raw_bufsize, GFP_KERNEL);
|
|
if (!tsdata->raw_buffer) {
|
|
error = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
}
|
|
|
|
/* mode register is 0x3c when in the work mode */
|
|
if (tsdata->version == M09)
|
|
goto m09_out;
|
|
|
|
error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03);
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"failed to switch to factory mode, error %d\n", error);
|
|
goto err_out;
|
|
}
|
|
|
|
tsdata->factory_mode = true;
|
|
do {
|
|
mdelay(EDT_SWITCH_MODE_DELAY);
|
|
/* mode register is 0x01 when in factory mode */
|
|
ret = edt_ft5x06_register_read(tsdata, FACTORY_REGISTER_OPMODE);
|
|
if (ret == 0x03)
|
|
break;
|
|
} while (--retries > 0);
|
|
|
|
if (retries == 0) {
|
|
dev_err(&client->dev, "not in factory mode after %dms.\n",
|
|
EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
|
|
error = -EIO;
|
|
goto err_out;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
kfree(tsdata->raw_buffer);
|
|
tsdata->raw_buffer = NULL;
|
|
tsdata->factory_mode = false;
|
|
enable_irq(client->irq);
|
|
|
|
return error;
|
|
|
|
m09_out:
|
|
dev_err(&client->dev, "No factory mode support for M09\n");
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
struct i2c_client *client = tsdata->client;
|
|
int retries = EDT_SWITCH_MODE_RETRIES;
|
|
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
|
int ret;
|
|
int error;
|
|
|
|
/* mode register is 0x01 when in the factory mode */
|
|
error = edt_ft5x06_register_write(tsdata, FACTORY_REGISTER_OPMODE, 0x1);
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"failed to switch to work mode, error: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
tsdata->factory_mode = false;
|
|
|
|
do {
|
|
mdelay(EDT_SWITCH_MODE_DELAY);
|
|
/* mode register is 0x01 when in factory mode */
|
|
ret = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OPMODE);
|
|
if (ret == 0x01)
|
|
break;
|
|
} while (--retries > 0);
|
|
|
|
if (retries == 0) {
|
|
dev_err(&client->dev, "not in work mode after %dms.\n",
|
|
EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
|
|
tsdata->factory_mode = true;
|
|
return -EIO;
|
|
}
|
|
|
|
kfree(tsdata->raw_buffer);
|
|
tsdata->raw_buffer = NULL;
|
|
|
|
/* restore parameters */
|
|
edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold,
|
|
tsdata->threshold);
|
|
edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
|
|
tsdata->gain);
|
|
edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
|
|
tsdata->offset);
|
|
if (reg_addr->reg_report_rate)
|
|
edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
|
|
tsdata->report_rate);
|
|
|
|
enable_irq(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int edt_ft5x06_debugfs_mode_get(void *data, u64 *mode)
|
|
{
|
|
struct edt_ft5x06_ts_data *tsdata = data;
|
|
|
|
*mode = tsdata->factory_mode;
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int edt_ft5x06_debugfs_mode_set(void *data, u64 mode)
|
|
{
|
|
struct edt_ft5x06_ts_data *tsdata = data;
|
|
int retval = 0;
|
|
|
|
if (mode > 1)
|
|
return -ERANGE;
|
|
|
|
mutex_lock(&tsdata->mutex);
|
|
|
|
if (mode != tsdata->factory_mode) {
|
|
retval = mode ? edt_ft5x06_factory_mode(tsdata) :
|
|
edt_ft5x06_work_mode(tsdata);
|
|
}
|
|
|
|
mutex_unlock(&tsdata->mutex);
|
|
|
|
return retval;
|
|
};
|
|
|
|
DEFINE_SIMPLE_ATTRIBUTE(debugfs_mode_fops, edt_ft5x06_debugfs_mode_get,
|
|
edt_ft5x06_debugfs_mode_set, "%llu\n");
|
|
|
|
static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file,
|
|
char __user *buf, size_t count, loff_t *off)
|
|
{
|
|
struct edt_ft5x06_ts_data *tsdata = file->private_data;
|
|
struct i2c_client *client = tsdata->client;
|
|
int retries = EDT_RAW_DATA_RETRIES;
|
|
int val, i, error;
|
|
size_t read = 0;
|
|
int colbytes;
|
|
char wrbuf[3];
|
|
u8 *rdbuf;
|
|
|
|
if (*off < 0 || *off >= tsdata->raw_bufsize)
|
|
return 0;
|
|
|
|
mutex_lock(&tsdata->mutex);
|
|
|
|
if (!tsdata->factory_mode || !tsdata->raw_buffer) {
|
|
error = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
error = edt_ft5x06_register_write(tsdata, 0x08, 0x01);
|
|
if (error) {
|
|
dev_dbg(&client->dev,
|
|
"failed to write 0x08 register, error %d\n", error);
|
|
goto out;
|
|
}
|
|
|
|
do {
|
|
msleep(EDT_RAW_DATA_DELAY);
|
|
val = edt_ft5x06_register_read(tsdata, 0x08);
|
|
if (val < 1)
|
|
break;
|
|
} while (--retries > 0);
|
|
|
|
if (val < 0) {
|
|
error = val;
|
|
dev_dbg(&client->dev,
|
|
"failed to read 0x08 register, error %d\n", error);
|
|
goto out;
|
|
}
|
|
|
|
if (retries == 0) {
|
|
dev_dbg(&client->dev,
|
|
"timed out waiting for register to settle\n");
|
|
error = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
rdbuf = tsdata->raw_buffer;
|
|
colbytes = tsdata->num_y * sizeof(u16);
|
|
|
|
wrbuf[0] = 0xf5;
|
|
wrbuf[1] = 0x0e;
|
|
for (i = 0; i < tsdata->num_x; i++) {
|
|
wrbuf[2] = i; /* column index */
|
|
error = edt_ft5x06_ts_readwrite(tsdata->client,
|
|
sizeof(wrbuf), wrbuf,
|
|
colbytes, rdbuf);
|
|
if (error)
|
|
goto out;
|
|
|
|
rdbuf += colbytes;
|
|
}
|
|
|
|
read = min_t(size_t, count, tsdata->raw_bufsize - *off);
|
|
if (copy_to_user(buf, tsdata->raw_buffer + *off, read)) {
|
|
error = -EFAULT;
|
|
goto out;
|
|
}
|
|
|
|
*off += read;
|
|
out:
|
|
mutex_unlock(&tsdata->mutex);
|
|
return error ?: read;
|
|
};
|
|
|
|
static const struct file_operations debugfs_raw_data_fops = {
|
|
.open = simple_open,
|
|
.read = edt_ft5x06_debugfs_raw_data_read,
|
|
};
|
|
|
|
static void
|
|
edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
|
|
const char *debugfs_name)
|
|
{
|
|
tsdata->debug_dir = debugfs_create_dir(debugfs_name, NULL);
|
|
if (!tsdata->debug_dir)
|
|
return;
|
|
|
|
debugfs_create_u16("num_x", S_IRUSR, tsdata->debug_dir, &tsdata->num_x);
|
|
debugfs_create_u16("num_y", S_IRUSR, tsdata->debug_dir, &tsdata->num_y);
|
|
|
|
debugfs_create_file("mode", S_IRUSR | S_IWUSR,
|
|
tsdata->debug_dir, tsdata, &debugfs_mode_fops);
|
|
debugfs_create_file("raw_data", S_IRUSR,
|
|
tsdata->debug_dir, tsdata, &debugfs_raw_data_fops);
|
|
}
|
|
|
|
static void
|
|
edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
debugfs_remove_recursive(tsdata->debug_dir);
|
|
kfree(tsdata->raw_buffer);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void
|
|
edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
|
|
const char *debugfs_name)
|
|
{
|
|
}
|
|
|
|
static inline void
|
|
edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
}
|
|
|
|
#endif /* CONFIG_DEBUGFS */
|
|
|
|
static int edt_ft5x06_ts_reset(struct i2c_client *client,
|
|
struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
int error;
|
|
|
|
if (gpio_is_valid(tsdata->wake_pin)) {
|
|
error = devm_gpio_request_one(&client->dev,
|
|
tsdata->wake_pin, GPIOF_OUT_INIT_LOW,
|
|
"edt-ft5x06 wake");
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"Failed to request GPIO %d as wake pin, error %d\n",
|
|
tsdata->wake_pin, error);
|
|
return error;
|
|
}
|
|
|
|
msleep(5);
|
|
gpio_set_value(tsdata->wake_pin, 1);
|
|
}
|
|
if (gpio_is_valid(tsdata->reset_pin)) {
|
|
/* this pulls reset down, enabling the low active reset */
|
|
error = devm_gpio_request_one(&client->dev,
|
|
tsdata->reset_pin, GPIOF_OUT_INIT_LOW,
|
|
"edt-ft5x06 reset");
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"Failed to request GPIO %d as reset pin, error %d\n",
|
|
tsdata->reset_pin, error);
|
|
return error;
|
|
}
|
|
|
|
msleep(5);
|
|
gpio_set_value(tsdata->reset_pin, 1);
|
|
msleep(300);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int edt_ft5x06_ts_identify(struct i2c_client *client,
|
|
struct edt_ft5x06_ts_data *tsdata,
|
|
char *fw_version)
|
|
{
|
|
u8 rdbuf[EDT_NAME_LEN];
|
|
char *p;
|
|
int error;
|
|
char *model_name = tsdata->name;
|
|
|
|
/* see what we find if we assume it is a M06 *
|
|
* if we get less than EDT_NAME_LEN, we don't want
|
|
* to have garbage in there
|
|
*/
|
|
memset(rdbuf, 0, sizeof(rdbuf));
|
|
error = edt_ft5x06_ts_readwrite(client, 1, "\xbb",
|
|
EDT_NAME_LEN - 1, rdbuf);
|
|
if (error)
|
|
return error;
|
|
|
|
/* if we find something consistent, stay with that assumption
|
|
* at least M09 won't send 3 bytes here
|
|
*/
|
|
if (!(strncasecmp(rdbuf + 1, "EP0", 3))) {
|
|
tsdata->version = M06;
|
|
|
|
/* remove last '$' end marker */
|
|
rdbuf[EDT_NAME_LEN - 1] = '\0';
|
|
if (rdbuf[EDT_NAME_LEN - 2] == '$')
|
|
rdbuf[EDT_NAME_LEN - 2] = '\0';
|
|
|
|
/* look for Model/Version separator */
|
|
p = strchr(rdbuf, '*');
|
|
if (p)
|
|
*p++ = '\0';
|
|
strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN);
|
|
strlcpy(fw_version, p ? p : "", EDT_NAME_LEN);
|
|
} else {
|
|
/* since there are only two versions around (M06, M09) */
|
|
tsdata->version = M09;
|
|
|
|
error = edt_ft5x06_ts_readwrite(client, 1, "\xA6",
|
|
2, rdbuf);
|
|
if (error)
|
|
return error;
|
|
|
|
strlcpy(fw_version, rdbuf, 2);
|
|
|
|
error = edt_ft5x06_ts_readwrite(client, 1, "\xA8",
|
|
1, rdbuf);
|
|
if (error)
|
|
return error;
|
|
|
|
snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09",
|
|
rdbuf[0] >> 4, rdbuf[0] & 0x0F);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define EDT_ATTR_CHECKSET(name, reg) \
|
|
do { \
|
|
if (pdata->name >= edt_ft5x06_attr_##name.limit_low && \
|
|
pdata->name <= edt_ft5x06_attr_##name.limit_high) \
|
|
edt_ft5x06_register_write(tsdata, reg, pdata->name); \
|
|
} while (0)
|
|
|
|
#define EDT_GET_PROP(name, reg) { \
|
|
u32 val; \
|
|
if (of_property_read_u32(np, #name, &val) == 0) \
|
|
edt_ft5x06_register_write(tsdata, reg, val); \
|
|
}
|
|
|
|
static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np,
|
|
struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
|
|
|
EDT_GET_PROP(threshold, reg_addr->reg_threshold);
|
|
EDT_GET_PROP(gain, reg_addr->reg_gain);
|
|
EDT_GET_PROP(offset, reg_addr->reg_offset);
|
|
}
|
|
|
|
static void
|
|
edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata,
|
|
const struct edt_ft5x06_platform_data *pdata)
|
|
{
|
|
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
|
|
|
if (!pdata->use_parameters)
|
|
return;
|
|
|
|
/* pick up defaults from the platform data */
|
|
EDT_ATTR_CHECKSET(threshold, reg_addr->reg_threshold);
|
|
EDT_ATTR_CHECKSET(gain, reg_addr->reg_gain);
|
|
EDT_ATTR_CHECKSET(offset, reg_addr->reg_offset);
|
|
if (reg_addr->reg_report_rate != NO_REGISTER)
|
|
EDT_ATTR_CHECKSET(report_rate, reg_addr->reg_report_rate);
|
|
}
|
|
|
|
static void
|
|
edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
|
|
|
tsdata->threshold = edt_ft5x06_register_read(tsdata,
|
|
reg_addr->reg_threshold);
|
|
tsdata->gain = edt_ft5x06_register_read(tsdata, reg_addr->reg_gain);
|
|
tsdata->offset = edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
|
|
if (reg_addr->reg_report_rate != NO_REGISTER)
|
|
tsdata->report_rate = edt_ft5x06_register_read(tsdata,
|
|
reg_addr->reg_report_rate);
|
|
tsdata->num_x = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_x);
|
|
tsdata->num_y = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_y);
|
|
}
|
|
|
|
static void
|
|
edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
|
|
|
|
switch (tsdata->version) {
|
|
case M06:
|
|
reg_addr->reg_threshold = WORK_REGISTER_THRESHOLD;
|
|
reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE;
|
|
reg_addr->reg_gain = WORK_REGISTER_GAIN;
|
|
reg_addr->reg_offset = WORK_REGISTER_OFFSET;
|
|
reg_addr->reg_num_x = WORK_REGISTER_NUM_X;
|
|
reg_addr->reg_num_y = WORK_REGISTER_NUM_Y;
|
|
break;
|
|
|
|
case M09:
|
|
reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
|
|
reg_addr->reg_gain = M09_REGISTER_GAIN;
|
|
reg_addr->reg_offset = M09_REGISTER_OFFSET;
|
|
reg_addr->reg_num_x = M09_REGISTER_NUM_X;
|
|
reg_addr->reg_num_y = M09_REGISTER_NUM_Y;
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int edt_ft5x06_i2c_ts_probe_dt(struct device *dev,
|
|
struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
|
|
/*
|
|
* irq_pin is not needed for DT setup.
|
|
* irq is associated via 'interrupts' property in DT
|
|
*/
|
|
tsdata->irq_pin = -EINVAL;
|
|
tsdata->reset_pin = of_get_named_gpio(np, "reset-gpios", 0);
|
|
tsdata->wake_pin = of_get_named_gpio(np, "wake-gpios", 0);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int edt_ft5x06_i2c_ts_probe_dt(struct device *dev,
|
|
struct edt_ft5x06_ts_data *tsdata)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int edt_ft5x06_ts_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
const struct edt_ft5x06_platform_data *pdata =
|
|
dev_get_platdata(&client->dev);
|
|
struct edt_ft5x06_ts_data *tsdata;
|
|
struct input_dev *input;
|
|
int error;
|
|
char fw_version[EDT_NAME_LEN];
|
|
|
|
dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n");
|
|
|
|
tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL);
|
|
if (!tsdata) {
|
|
dev_err(&client->dev, "failed to allocate driver data.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (!pdata) {
|
|
error = edt_ft5x06_i2c_ts_probe_dt(&client->dev, tsdata);
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"DT probe failed and no platform data present\n");
|
|
return error;
|
|
}
|
|
} else {
|
|
tsdata->reset_pin = pdata->reset_pin;
|
|
tsdata->irq_pin = pdata->irq_pin;
|
|
tsdata->wake_pin = -EINVAL;
|
|
}
|
|
|
|
error = edt_ft5x06_ts_reset(client, tsdata);
|
|
if (error)
|
|
return error;
|
|
|
|
if (gpio_is_valid(tsdata->irq_pin)) {
|
|
error = devm_gpio_request_one(&client->dev, tsdata->irq_pin,
|
|
GPIOF_IN, "edt-ft5x06 irq");
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"Failed to request GPIO %d, error %d\n",
|
|
tsdata->irq_pin, error);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
input = devm_input_allocate_device(&client->dev);
|
|
if (!input) {
|
|
dev_err(&client->dev, "failed to allocate input device.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mutex_init(&tsdata->mutex);
|
|
tsdata->client = client;
|
|
tsdata->input = input;
|
|
tsdata->factory_mode = false;
|
|
|
|
error = edt_ft5x06_ts_identify(client, tsdata, fw_version);
|
|
if (error) {
|
|
dev_err(&client->dev, "touchscreen probe failed\n");
|
|
return error;
|
|
}
|
|
|
|
edt_ft5x06_ts_set_regs(tsdata);
|
|
|
|
if (!pdata)
|
|
edt_ft5x06_ts_get_dt_defaults(client->dev.of_node, tsdata);
|
|
else
|
|
edt_ft5x06_ts_get_defaults(tsdata, pdata);
|
|
|
|
edt_ft5x06_ts_get_parameters(tsdata);
|
|
|
|
dev_dbg(&client->dev,
|
|
"Model \"%s\", Rev. \"%s\", %dx%d sensors\n",
|
|
tsdata->name, fw_version, tsdata->num_x, tsdata->num_y);
|
|
|
|
input->name = tsdata->name;
|
|
input->id.bustype = BUS_I2C;
|
|
input->dev.parent = &client->dev;
|
|
|
|
__set_bit(EV_KEY, input->evbit);
|
|
__set_bit(EV_ABS, input->evbit);
|
|
__set_bit(BTN_TOUCH, input->keybit);
|
|
input_set_abs_params(input, ABS_X, 0, tsdata->num_x * 64 - 1, 0, 0);
|
|
input_set_abs_params(input, ABS_Y, 0, tsdata->num_y * 64 - 1, 0, 0);
|
|
input_set_abs_params(input, ABS_MT_POSITION_X,
|
|
0, tsdata->num_x * 64 - 1, 0, 0);
|
|
input_set_abs_params(input, ABS_MT_POSITION_Y,
|
|
0, tsdata->num_y * 64 - 1, 0, 0);
|
|
|
|
if (!pdata)
|
|
touchscreen_parse_of_params(input);
|
|
|
|
error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
|
|
if (error) {
|
|
dev_err(&client->dev, "Unable to init MT slots.\n");
|
|
return error;
|
|
}
|
|
|
|
input_set_drvdata(input, tsdata);
|
|
i2c_set_clientdata(client, tsdata);
|
|
|
|
error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
|
|
edt_ft5x06_ts_isr,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
client->name, tsdata);
|
|
if (error) {
|
|
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
|
|
return error;
|
|
}
|
|
|
|
error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
|
|
if (error)
|
|
return error;
|
|
|
|
error = input_register_device(input);
|
|
if (error)
|
|
goto err_remove_attrs;
|
|
|
|
edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
|
|
device_init_wakeup(&client->dev, 1);
|
|
|
|
dev_dbg(&client->dev,
|
|
"EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n",
|
|
client->irq, tsdata->wake_pin, tsdata->reset_pin);
|
|
|
|
return 0;
|
|
|
|
err_remove_attrs:
|
|
sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
|
|
return error;
|
|
}
|
|
|
|
static int edt_ft5x06_ts_remove(struct i2c_client *client)
|
|
{
|
|
struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
|
|
|
|
edt_ft5x06_ts_teardown_debugfs(tsdata);
|
|
sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
|
|
edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
|
|
|
|
static const struct i2c_device_id edt_ft5x06_ts_id[] = {
|
|
{ "edt-ft5x06", 0, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id edt_ft5x06_of_match[] = {
|
|
{ .compatible = "edt,edt-ft5206", },
|
|
{ .compatible = "edt,edt-ft5306", },
|
|
{ .compatible = "edt,edt-ft5406", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver edt_ft5x06_ts_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "edt_ft5x06",
|
|
.of_match_table = of_match_ptr(edt_ft5x06_of_match),
|
|
.pm = &edt_ft5x06_ts_pm_ops,
|
|
},
|
|
.id_table = edt_ft5x06_ts_id,
|
|
.probe = edt_ft5x06_ts_probe,
|
|
.remove = edt_ft5x06_ts_remove,
|
|
};
|
|
|
|
module_i2c_driver(edt_ft5x06_ts_driver);
|
|
|
|
MODULE_AUTHOR("Simon Budig <simon.budig@kernelconcepts.de>");
|
|
MODULE_DESCRIPTION("EDT FT5x06 I2C Touchscreen Driver");
|
|
MODULE_LICENSE("GPL");
|