mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 06:36:29 +07:00
edafb6fe42
Drivers: - ds1307: properly handle oscillator failure flags - imx-sc: alarm support - pcf2123: alarm support, correct offset handling - sun6i: add R40 support - simplify getting the adapter of an i2c client -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl0tl5UACgkQ2wIijOdR NOVMig/8C7o1tBpm1Kfs3GYjZ5o2SI7m6425OypONOa9U2rFVnFHxVogtIHTC7wa SXVFdV+L/MT/xHEbQ3Mfv36cRB0h3Q89NqcVWFkjSGvoqliTIA2F2zsLDHYLDyEO AdOc8ztzrTCmlPjrg7d64qxA/l/dPChIhDW1nsMTJY7EXO0lBywcEP0KQsnOrjzD lNDskhLuYaL0h1OL2KSrx/81ZZW1MXEyTU5nl4e2JowVYFB0f75P7h79MChmjM35 wE5WVDH8LqhYHOoVR9fW5sjRpNgdKfFsH8Sh5DGVU3jLGA72v0Eo/c1BHHegumoI 6X+09nv9D3j4l2z5on5TzXMhvwuLdZQ2VRBdpI1XcVjtYA18UTIXZA8wDRgLTb3b MZE31s1WM0vxSiGyaL+hfI9APfX0xSd+BIqVvxhUVPvCGCwWvfLJgQfmlsW4eWOk LdmifkLb0Mjf+ym+WH8GvXND+ZeNJ9eUUwVZkGHPhb6SfkLiEAnw3f1czOT1fLDR q6i0hG9/+BsiwZMCJt86rDZd1D51FjkNzUH1d///iURvaDhoi41nKaFR45kc5Foc WVmnWDWw1yg7K6kUQ3kXsyBkbw0jhdCXGN539rrvbElyL5e5XDUo+3gAEi25CkVe DCpxICWO+jvOrjJBHdH3T3HJDa7NbFXWkXOwLXe5M42q7rrgZwY= =aJ54 -----END PGP SIGNATURE----- Merge tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A quiet cycle this time. - ds1307: properly handle oscillator failure flags - imx-sc: alarm support - pcf2123: alarm support, correct offset handling - sun6i: add R40 support - simplify getting the adapter of an i2c client" * tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits) rtc: wm831x: Add IRQF_ONESHOT flag rtc: stm32: remove one condition check in stm32_rtc_set_alarm() rtc: pcf2123: Fix build error rtc: interface: Change type of 'count' from int to u64 rtc: pcf8563: Clear event flags and disable interrupts before requesting irq rtc: pcf8563: Fix interrupt trigger method rtc: pcf2123: fix negative offset rounding rtc: pcf2123: add alarm support rtc: pcf2123: use %ptR rtc: pcf2123: port to regmap rtc: pcf2123: remove sysfs register view rtc: rx8025: simplify getting the adapter of a client rtc: rx8010: simplify getting the adapter of a client rtc: rv8803: simplify getting the adapter of a client rtc: m41t80: simplify getting the adapter of a client rtc: fm3130: simplify getting the adapter of a client rtc: tegra: Drop MODULE_ALIAS rtc: sun6i: Add R40 compatible dt-bindings: rtc: sun6i: Add the R40 RTC compatible dt-bindings: rtc: Convert Allwinner A31 RTC to a schema ...
531 lines
15 KiB
C
531 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
|
|
*
|
|
* Copyright (C) 2008 Sergey Lapin
|
|
* Based on ds1307 driver by James Chapman and David Brownell
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define FM3130_RTC_CONTROL (0x0)
|
|
#define FM3130_CAL_CONTROL (0x1)
|
|
#define FM3130_RTC_SECONDS (0x2)
|
|
#define FM3130_RTC_MINUTES (0x3)
|
|
#define FM3130_RTC_HOURS (0x4)
|
|
#define FM3130_RTC_DAY (0x5)
|
|
#define FM3130_RTC_DATE (0x6)
|
|
#define FM3130_RTC_MONTHS (0x7)
|
|
#define FM3130_RTC_YEARS (0x8)
|
|
|
|
#define FM3130_ALARM_SECONDS (0x9)
|
|
#define FM3130_ALARM_MINUTES (0xa)
|
|
#define FM3130_ALARM_HOURS (0xb)
|
|
#define FM3130_ALARM_DATE (0xc)
|
|
#define FM3130_ALARM_MONTHS (0xd)
|
|
#define FM3130_ALARM_WP_CONTROL (0xe)
|
|
|
|
#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
|
|
#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
|
|
#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
|
|
#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
|
|
#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
|
|
#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
|
|
#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
|
|
#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
|
|
#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
|
|
|
|
#define FM3130_CLOCK_REGS 7
|
|
#define FM3130_ALARM_REGS 5
|
|
|
|
struct fm3130 {
|
|
u8 reg_addr_time;
|
|
u8 reg_addr_alarm;
|
|
u8 regs[15];
|
|
struct i2c_msg msg[4];
|
|
struct i2c_client *client;
|
|
struct rtc_device *rtc;
|
|
int alarm_valid;
|
|
int data_valid;
|
|
};
|
|
static const struct i2c_device_id fm3130_id[] = {
|
|
{ "fm3130", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, fm3130_id);
|
|
|
|
#define FM3130_MODE_NORMAL 0
|
|
#define FM3130_MODE_WRITE 1
|
|
#define FM3130_MODE_READ 2
|
|
|
|
static void fm3130_rtc_mode(struct device *dev, int mode)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
|
|
fm3130->regs[FM3130_RTC_CONTROL] =
|
|
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
|
|
switch (mode) {
|
|
case FM3130_MODE_NORMAL:
|
|
fm3130->regs[FM3130_RTC_CONTROL] &=
|
|
~(FM3130_RTC_CONTROL_BIT_WRITE |
|
|
FM3130_RTC_CONTROL_BIT_READ);
|
|
break;
|
|
case FM3130_MODE_WRITE:
|
|
fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
|
|
break;
|
|
case FM3130_MODE_READ:
|
|
fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "invalid mode %d\n", mode);
|
|
break;
|
|
}
|
|
|
|
i2c_smbus_write_byte_data(fm3130->client,
|
|
FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
|
|
}
|
|
|
|
static int fm3130_get_time(struct device *dev, struct rtc_time *t)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
int tmp;
|
|
|
|
if (!fm3130->data_valid) {
|
|
/* We have invalid data in RTC, probably due
|
|
to battery faults or other problems. Return EIO
|
|
for now, it will allow us to set data later instead
|
|
of error during probing which disables device */
|
|
return -EIO;
|
|
}
|
|
fm3130_rtc_mode(dev, FM3130_MODE_READ);
|
|
|
|
/* read the RTC date and time registers all at once */
|
|
tmp = i2c_transfer(fm3130->client->adapter, fm3130->msg, 2);
|
|
if (tmp != 2) {
|
|
dev_err(dev, "%s error %d\n", "read", tmp);
|
|
return -EIO;
|
|
}
|
|
|
|
fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
|
|
|
|
dev_dbg(dev, "%s: %15ph\n", "read", fm3130->regs);
|
|
|
|
t->tm_sec = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
|
|
t->tm_min = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
|
|
tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
|
|
t->tm_hour = bcd2bin(tmp);
|
|
t->tm_wday = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
|
|
t->tm_mday = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
|
|
tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
|
|
t->tm_mon = bcd2bin(tmp) - 1;
|
|
|
|
/* assume 20YY not 19YY, and ignore CF bit */
|
|
t->tm_year = bcd2bin(fm3130->regs[FM3130_RTC_YEARS]) + 100;
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"read", t->tm_sec, t->tm_min,
|
|
t->tm_hour, t->tm_mday,
|
|
t->tm_mon, t->tm_year, t->tm_wday);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int fm3130_set_time(struct device *dev, struct rtc_time *t)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
int tmp, i;
|
|
u8 *buf = fm3130->regs;
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"write", t->tm_sec, t->tm_min,
|
|
t->tm_hour, t->tm_mday,
|
|
t->tm_mon, t->tm_year, t->tm_wday);
|
|
|
|
/* first register addr */
|
|
buf[FM3130_RTC_SECONDS] = bin2bcd(t->tm_sec);
|
|
buf[FM3130_RTC_MINUTES] = bin2bcd(t->tm_min);
|
|
buf[FM3130_RTC_HOURS] = bin2bcd(t->tm_hour);
|
|
buf[FM3130_RTC_DAY] = bin2bcd(t->tm_wday + 1);
|
|
buf[FM3130_RTC_DATE] = bin2bcd(t->tm_mday);
|
|
buf[FM3130_RTC_MONTHS] = bin2bcd(t->tm_mon + 1);
|
|
|
|
/* assume 20YY not 19YY */
|
|
tmp = t->tm_year - 100;
|
|
buf[FM3130_RTC_YEARS] = bin2bcd(tmp);
|
|
|
|
dev_dbg(dev, "%s: %15ph\n", "write", buf);
|
|
|
|
fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
|
|
|
|
/* Writing time registers, we don't support multibyte transfers */
|
|
for (i = 0; i < FM3130_CLOCK_REGS; i++) {
|
|
i2c_smbus_write_byte_data(fm3130->client,
|
|
FM3130_RTC_SECONDS + i,
|
|
fm3130->regs[FM3130_RTC_SECONDS + i]);
|
|
}
|
|
|
|
fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
|
|
|
|
/* We assume here that data are valid once written */
|
|
if (!fm3130->data_valid)
|
|
fm3130->data_valid = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
int tmp;
|
|
struct rtc_time *tm = &alrm->time;
|
|
|
|
if (!fm3130->alarm_valid) {
|
|
/*
|
|
* We have invalid alarm in RTC, probably due to battery faults
|
|
* or other problems. Return EIO for now, it will allow us to
|
|
* set alarm value later instead of error during probing which
|
|
* disables device
|
|
*/
|
|
return -EIO;
|
|
}
|
|
|
|
/* read the RTC alarm registers all at once */
|
|
tmp = i2c_transfer(fm3130->client->adapter, &fm3130->msg[2], 2);
|
|
if (tmp != 2) {
|
|
dev_err(dev, "%s error %d\n", "read", tmp);
|
|
return -EIO;
|
|
}
|
|
dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
|
|
fm3130->regs[FM3130_ALARM_SECONDS],
|
|
fm3130->regs[FM3130_ALARM_MINUTES],
|
|
fm3130->regs[FM3130_ALARM_HOURS],
|
|
fm3130->regs[FM3130_ALARM_DATE],
|
|
fm3130->regs[FM3130_ALARM_MONTHS]);
|
|
|
|
tm->tm_sec = bcd2bin(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
|
|
tm->tm_min = bcd2bin(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
|
|
tm->tm_hour = bcd2bin(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
|
|
tm->tm_mday = bcd2bin(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
|
|
tm->tm_mon = bcd2bin(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
|
|
|
|
if (tm->tm_mon > 0)
|
|
tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"read alarm", tm->tm_sec, tm->tm_min,
|
|
tm->tm_hour, tm->tm_mday,
|
|
tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
/* check if alarm enabled */
|
|
fm3130->regs[FM3130_RTC_CONTROL] =
|
|
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
|
|
|
|
if ((fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AEN) &&
|
|
(~fm3130->regs[FM3130_RTC_CONTROL] &
|
|
FM3130_RTC_CONTROL_BIT_CAL)) {
|
|
alrm->enabled = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
struct rtc_time *tm = &alrm->time;
|
|
int i;
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"write alarm", tm->tm_sec, tm->tm_min,
|
|
tm->tm_hour, tm->tm_mday,
|
|
tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
|
|
fm3130->regs[FM3130_ALARM_SECONDS] =
|
|
(tm->tm_sec != -1) ? bin2bcd(tm->tm_sec) : 0x80;
|
|
|
|
fm3130->regs[FM3130_ALARM_MINUTES] =
|
|
(tm->tm_min != -1) ? bin2bcd(tm->tm_min) : 0x80;
|
|
|
|
fm3130->regs[FM3130_ALARM_HOURS] =
|
|
(tm->tm_hour != -1) ? bin2bcd(tm->tm_hour) : 0x80;
|
|
|
|
fm3130->regs[FM3130_ALARM_DATE] =
|
|
(tm->tm_mday != -1) ? bin2bcd(tm->tm_mday) : 0x80;
|
|
|
|
fm3130->regs[FM3130_ALARM_MONTHS] =
|
|
(tm->tm_mon != -1) ? bin2bcd(tm->tm_mon + 1) : 0x80;
|
|
|
|
dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
|
|
fm3130->regs[FM3130_ALARM_SECONDS],
|
|
fm3130->regs[FM3130_ALARM_MINUTES],
|
|
fm3130->regs[FM3130_ALARM_HOURS],
|
|
fm3130->regs[FM3130_ALARM_DATE],
|
|
fm3130->regs[FM3130_ALARM_MONTHS]);
|
|
/* Writing time registers, we don't support multibyte transfers */
|
|
for (i = 0; i < FM3130_ALARM_REGS; i++) {
|
|
i2c_smbus_write_byte_data(fm3130->client,
|
|
FM3130_ALARM_SECONDS + i,
|
|
fm3130->regs[FM3130_ALARM_SECONDS + i]);
|
|
}
|
|
fm3130->regs[FM3130_RTC_CONTROL] =
|
|
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
|
|
|
|
/* enable or disable alarm */
|
|
if (alrm->enabled) {
|
|
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
|
|
(fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_CAL)) |
|
|
FM3130_RTC_CONTROL_BIT_AEN);
|
|
} else {
|
|
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_CAL) &
|
|
~(FM3130_RTC_CONTROL_BIT_AEN));
|
|
}
|
|
|
|
/* We assume here that data is valid once written */
|
|
if (!fm3130->alarm_valid)
|
|
fm3130->alarm_valid = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fm3130_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
fm3130->regs[FM3130_RTC_CONTROL] =
|
|
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
|
|
|
|
dev_dbg(dev, "alarm_irq_enable: enable=%d, FM3130_RTC_CONTROL=%02x\n",
|
|
enabled, fm3130->regs[FM3130_RTC_CONTROL]);
|
|
|
|
switch (enabled) {
|
|
case 0: /* alarm off */
|
|
ret = i2c_smbus_write_byte_data(fm3130->client,
|
|
FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_CAL) &
|
|
~(FM3130_RTC_CONTROL_BIT_AEN));
|
|
break;
|
|
case 1: /* alarm on */
|
|
ret = i2c_smbus_write_byte_data(fm3130->client,
|
|
FM3130_RTC_CONTROL, (fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_CAL)) |
|
|
FM3130_RTC_CONTROL_BIT_AEN);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct rtc_class_ops fm3130_rtc_ops = {
|
|
.read_time = fm3130_get_time,
|
|
.set_time = fm3130_set_time,
|
|
.read_alarm = fm3130_read_alarm,
|
|
.set_alarm = fm3130_set_alarm,
|
|
.alarm_irq_enable = fm3130_alarm_irq_enable,
|
|
};
|
|
|
|
static struct i2c_driver fm3130_driver;
|
|
|
|
static int fm3130_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct fm3130 *fm3130;
|
|
int err = -ENODEV;
|
|
int tmp;
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
|
|
if (!i2c_check_functionality(adapter,
|
|
I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
fm3130 = devm_kzalloc(&client->dev, sizeof(struct fm3130), GFP_KERNEL);
|
|
|
|
if (!fm3130)
|
|
return -ENOMEM;
|
|
|
|
fm3130->client = client;
|
|
i2c_set_clientdata(client, fm3130);
|
|
fm3130->reg_addr_time = FM3130_RTC_SECONDS;
|
|
fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
|
|
|
|
/* Messages to read time */
|
|
fm3130->msg[0].addr = client->addr;
|
|
fm3130->msg[0].flags = 0;
|
|
fm3130->msg[0].len = 1;
|
|
fm3130->msg[0].buf = &fm3130->reg_addr_time;
|
|
|
|
fm3130->msg[1].addr = client->addr;
|
|
fm3130->msg[1].flags = I2C_M_RD;
|
|
fm3130->msg[1].len = FM3130_CLOCK_REGS;
|
|
fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
|
|
|
|
/* Messages to read alarm */
|
|
fm3130->msg[2].addr = client->addr;
|
|
fm3130->msg[2].flags = 0;
|
|
fm3130->msg[2].len = 1;
|
|
fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
|
|
|
|
fm3130->msg[3].addr = client->addr;
|
|
fm3130->msg[3].flags = I2C_M_RD;
|
|
fm3130->msg[3].len = FM3130_ALARM_REGS;
|
|
fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
|
|
|
|
fm3130->alarm_valid = 0;
|
|
fm3130->data_valid = 0;
|
|
|
|
tmp = i2c_transfer(adapter, fm3130->msg, 4);
|
|
if (tmp != 4) {
|
|
dev_dbg(&client->dev, "read error %d\n", tmp);
|
|
err = -EIO;
|
|
goto exit_free;
|
|
}
|
|
|
|
fm3130->regs[FM3130_RTC_CONTROL] =
|
|
i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
|
|
fm3130->regs[FM3130_CAL_CONTROL] =
|
|
i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
|
|
|
|
/* Disabling calibration mode */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
|
|
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_CAL));
|
|
dev_warn(&client->dev, "Disabling calibration mode!\n");
|
|
}
|
|
|
|
/* Disabling read and write modes */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
|
|
fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) {
|
|
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_READ |
|
|
FM3130_RTC_CONTROL_BIT_WRITE));
|
|
dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
|
|
}
|
|
|
|
/* oscillator off? turn it on, so clock can tick. */
|
|
if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
|
|
i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
|
|
fm3130->regs[FM3130_CAL_CONTROL] &
|
|
~(FM3130_CAL_CONTROL_BIT_nOSCEN));
|
|
|
|
/* low battery? clear flag, and warn */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) {
|
|
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~(FM3130_RTC_CONTROL_BIT_LB));
|
|
dev_warn(&client->dev, "Low battery!\n");
|
|
}
|
|
|
|
/* check if Power On Reset bit is set */
|
|
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
|
|
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
|
fm3130->regs[FM3130_RTC_CONTROL] &
|
|
~FM3130_RTC_CONTROL_BIT_POR);
|
|
dev_dbg(&client->dev, "POR bit is set\n");
|
|
}
|
|
/* ACS is controlled by alarm */
|
|
i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
|
|
|
|
/* alarm registers sanity check */
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
|
|
if (tmp > 59)
|
|
goto bad_alarm;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
|
|
if (tmp > 59)
|
|
goto bad_alarm;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
|
|
if (tmp > 23)
|
|
goto bad_alarm;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
|
|
if (tmp == 0 || tmp > 31)
|
|
goto bad_alarm;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
|
|
if (tmp == 0 || tmp > 12)
|
|
goto bad_alarm;
|
|
|
|
fm3130->alarm_valid = 1;
|
|
|
|
bad_alarm:
|
|
|
|
/* clock registers sanity chek */
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
|
|
if (tmp > 59)
|
|
goto bad_clock;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
|
|
if (tmp > 59)
|
|
goto bad_clock;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
|
|
if (tmp > 23)
|
|
goto bad_clock;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x7);
|
|
if (tmp == 0 || tmp > 7)
|
|
goto bad_clock;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
|
|
if (tmp == 0 || tmp > 31)
|
|
goto bad_clock;
|
|
|
|
tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
|
|
if (tmp == 0 || tmp > 12)
|
|
goto bad_clock;
|
|
|
|
fm3130->data_valid = 1;
|
|
|
|
bad_clock:
|
|
|
|
if (!fm3130->data_valid || !fm3130->alarm_valid)
|
|
dev_dbg(&client->dev, "%s: %15ph\n", "bogus registers",
|
|
fm3130->regs);
|
|
|
|
/* We won't bail out here because we just got invalid data.
|
|
Time setting from u-boot doesn't work anyway */
|
|
fm3130->rtc = devm_rtc_device_register(&client->dev, client->name,
|
|
&fm3130_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(fm3130->rtc)) {
|
|
err = PTR_ERR(fm3130->rtc);
|
|
dev_err(&client->dev,
|
|
"unable to register the class device\n");
|
|
goto exit_free;
|
|
}
|
|
return 0;
|
|
exit_free:
|
|
return err;
|
|
}
|
|
|
|
static struct i2c_driver fm3130_driver = {
|
|
.driver = {
|
|
.name = "rtc-fm3130",
|
|
},
|
|
.probe = fm3130_probe,
|
|
.id_table = fm3130_id,
|
|
};
|
|
|
|
module_i2c_driver(fm3130_driver);
|
|
|
|
MODULE_DESCRIPTION("RTC driver for FM3130");
|
|
MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
|
|
MODULE_LICENSE("GPL");
|
|
|