mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
6890ba72f5
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com>
594 lines
20 KiB
C
594 lines
20 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#ifndef __il_3945_h__
|
|
#define __il_3945_h__
|
|
|
|
#include <linux/pci.h> /* for struct pci_device_id */
|
|
#include <linux/kernel.h>
|
|
#include <net/ieee80211_radiotap.h>
|
|
|
|
/* Hardware specific file defines the PCI IDs table for that hardware module */
|
|
extern const struct pci_device_id il3945_hw_card_ids[];
|
|
|
|
#include "common.h"
|
|
|
|
extern const struct il_ops il3945_ops;
|
|
|
|
/* Highest firmware API version supported */
|
|
#define IL3945_UCODE_API_MAX 2
|
|
|
|
/* Lowest firmware API version supported */
|
|
#define IL3945_UCODE_API_MIN 1
|
|
|
|
#define IL3945_FW_PRE "iwlwifi-3945-"
|
|
#define _IL3945_MODULE_FIRMWARE(api) IL3945_FW_PRE #api ".ucode"
|
|
#define IL3945_MODULE_FIRMWARE(api) _IL3945_MODULE_FIRMWARE(api)
|
|
|
|
/* Default noise level to report when noise measurement is not available.
|
|
* This may be because we're:
|
|
* 1) Not associated (4965, no beacon stats being sent to driver)
|
|
* 2) Scanning (noise measurement does not apply to associated channel)
|
|
* 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
|
|
* Use default noise value of -127 ... this is below the range of measurable
|
|
* Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
|
|
* Also, -127 works better than 0 when averaging frames with/without
|
|
* noise info (e.g. averaging might be done in app); measured dBm values are
|
|
* always negative ... using a negative value as the default keeps all
|
|
* averages within an s8's (used in some apps) range of negative values. */
|
|
#define IL_NOISE_MEAS_NOT_AVAILABLE (-127)
|
|
|
|
/* Module parameters accessible from iwl-*.c */
|
|
extern struct il_mod_params il3945_mod_params;
|
|
|
|
struct il3945_rate_scale_data {
|
|
u64 data;
|
|
s32 success_counter;
|
|
s32 success_ratio;
|
|
s32 counter;
|
|
s32 average_tpt;
|
|
unsigned long stamp;
|
|
};
|
|
|
|
struct il3945_rs_sta {
|
|
spinlock_t lock;
|
|
struct il_priv *il;
|
|
s32 *expected_tpt;
|
|
unsigned long last_partial_flush;
|
|
unsigned long last_flush;
|
|
u32 flush_time;
|
|
u32 last_tx_packets;
|
|
u32 tx_packets;
|
|
u8 tgg;
|
|
u8 flush_pending;
|
|
u8 start_rate;
|
|
struct timer_list rate_scale_flush;
|
|
struct il3945_rate_scale_data win[RATE_COUNT_3945];
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
struct dentry *rs_sta_dbgfs_stats_table_file;
|
|
#endif
|
|
|
|
/* used to be in sta_info */
|
|
int last_txrate_idx;
|
|
};
|
|
|
|
/*
|
|
* The common struct MUST be first because it is shared between
|
|
* 3945 and 4965!
|
|
*/
|
|
struct il3945_sta_priv {
|
|
struct il_station_priv_common common;
|
|
struct il3945_rs_sta rs_sta;
|
|
};
|
|
|
|
enum il3945_antenna {
|
|
IL_ANTENNA_DIVERSITY,
|
|
IL_ANTENNA_MAIN,
|
|
IL_ANTENNA_AUX
|
|
};
|
|
|
|
/*
|
|
* RTS threshold here is total size [2347] minus 4 FCS bytes
|
|
* Per spec:
|
|
* a value of 0 means RTS on all data/management packets
|
|
* a value > max MSDU size means no RTS
|
|
* else RTS for data/management frames where MPDU is larger
|
|
* than RTS value.
|
|
*/
|
|
#define DEFAULT_RTS_THRESHOLD 2347U
|
|
#define MIN_RTS_THRESHOLD 0U
|
|
#define MAX_RTS_THRESHOLD 2347U
|
|
#define MAX_MSDU_SIZE 2304U
|
|
#define MAX_MPDU_SIZE 2346U
|
|
#define DEFAULT_BEACON_INTERVAL 100U
|
|
#define DEFAULT_SHORT_RETRY_LIMIT 7U
|
|
#define DEFAULT_LONG_RETRY_LIMIT 4U
|
|
|
|
#define IL_TX_FIFO_AC0 0
|
|
#define IL_TX_FIFO_AC1 1
|
|
#define IL_TX_FIFO_AC2 2
|
|
#define IL_TX_FIFO_AC3 3
|
|
#define IL_TX_FIFO_HCCA_1 5
|
|
#define IL_TX_FIFO_HCCA_2 6
|
|
#define IL_TX_FIFO_NONE 7
|
|
|
|
#define IEEE80211_DATA_LEN 2304
|
|
#define IEEE80211_4ADDR_LEN 30
|
|
#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
|
|
#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
|
|
|
|
struct il3945_frame {
|
|
union {
|
|
struct ieee80211_hdr frame;
|
|
struct il3945_tx_beacon_cmd beacon;
|
|
u8 raw[IEEE80211_FRAME_LEN];
|
|
u8 cmd[360];
|
|
} u;
|
|
struct list_head list;
|
|
};
|
|
|
|
#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
|
|
#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
|
|
#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
|
|
|
|
#define IL_SUPPORTED_RATES_IE_LEN 8
|
|
|
|
#define SCAN_INTERVAL 100
|
|
|
|
#define MAX_TID_COUNT 9
|
|
|
|
#define IL_INVALID_RATE 0xFF
|
|
#define IL_INVALID_VALUE -1
|
|
|
|
#define STA_PS_STATUS_WAKE 0
|
|
#define STA_PS_STATUS_SLEEP 1
|
|
|
|
struct il3945_ibss_seq {
|
|
u8 mac[ETH_ALEN];
|
|
u16 seq_num;
|
|
u16 frag_num;
|
|
unsigned long packet_time;
|
|
struct list_head list;
|
|
};
|
|
|
|
#define IL_RX_HDR(x) ((struct il3945_rx_frame_hdr *)(\
|
|
x->u.rx_frame.stats.payload + \
|
|
x->u.rx_frame.stats.phy_count))
|
|
#define IL_RX_END(x) ((struct il3945_rx_frame_end *)(\
|
|
IL_RX_HDR(x)->payload + \
|
|
le16_to_cpu(IL_RX_HDR(x)->len)))
|
|
#define IL_RX_STATS(x) (&x->u.rx_frame.stats)
|
|
#define IL_RX_DATA(x) (IL_RX_HDR(x)->payload)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* Functions implemented in iwl3945-base.c which are forward declared here
|
|
* for use by iwl-*.c
|
|
*
|
|
*****************************************************************************/
|
|
int il3945_calc_db_from_ratio(int sig_ratio);
|
|
void il3945_rx_replenish(void *data);
|
|
void il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq);
|
|
unsigned int il3945_fill_beacon_frame(struct il_priv *il,
|
|
struct ieee80211_hdr *hdr, int left);
|
|
int il3945_dump_nic_event_log(struct il_priv *il, bool full_log, char **buf,
|
|
bool display);
|
|
void il3945_dump_nic_error_log(struct il_priv *il);
|
|
|
|
/******************************************************************************
|
|
*
|
|
* Functions implemented in iwl-[34]*.c which are forward declared here
|
|
* for use by iwl3945-base.c
|
|
*
|
|
* NOTE: The implementation of these functions are hardware specific
|
|
* which is why they are in the hardware specific files (vs. iwl-base.c)
|
|
*
|
|
* Naming convention --
|
|
* il3945_ <-- Its part of iwlwifi (should be changed to il3945_)
|
|
* il3945_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW)
|
|
* iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
|
|
* il3945_bg_ <-- Called from work queue context
|
|
* il3945_mac_ <-- mac80211 callback
|
|
*
|
|
****************************************************************************/
|
|
void il3945_hw_handler_setup(struct il_priv *il);
|
|
void il3945_hw_setup_deferred_work(struct il_priv *il);
|
|
void il3945_hw_cancel_deferred_work(struct il_priv *il);
|
|
int il3945_hw_rxq_stop(struct il_priv *il);
|
|
int il3945_hw_set_hw_params(struct il_priv *il);
|
|
int il3945_hw_nic_init(struct il_priv *il);
|
|
int il3945_hw_nic_stop_master(struct il_priv *il);
|
|
void il3945_hw_txq_ctx_free(struct il_priv *il);
|
|
void il3945_hw_txq_ctx_stop(struct il_priv *il);
|
|
int il3945_hw_nic_reset(struct il_priv *il);
|
|
int il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
|
|
dma_addr_t addr, u16 len, u8 reset, u8 pad);
|
|
void il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq);
|
|
int il3945_hw_get_temperature(struct il_priv *il);
|
|
int il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq);
|
|
unsigned int il3945_hw_get_beacon_cmd(struct il_priv *il,
|
|
struct il3945_frame *frame, u8 rate);
|
|
void il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd,
|
|
struct ieee80211_tx_info *info,
|
|
struct ieee80211_hdr *hdr, int sta_id);
|
|
int il3945_hw_reg_send_txpower(struct il_priv *il);
|
|
int il3945_hw_reg_set_txpower(struct il_priv *il, s8 power);
|
|
void il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb);
|
|
void il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb);
|
|
void il3945_disable_events(struct il_priv *il);
|
|
int il4965_get_temperature(const struct il_priv *il);
|
|
void il3945_post_associate(struct il_priv *il);
|
|
void il3945_config_ap(struct il_priv *il);
|
|
|
|
int il3945_commit_rxon(struct il_priv *il);
|
|
|
|
/**
|
|
* il3945_hw_find_station - Find station id for a given BSSID
|
|
* @bssid: MAC address of station ID to find
|
|
*
|
|
* NOTE: This should not be hardware specific but the code has
|
|
* not yet been merged into a single common layer for managing the
|
|
* station tables.
|
|
*/
|
|
u8 il3945_hw_find_station(struct il_priv *il, const u8 *bssid);
|
|
|
|
__le32 il3945_get_antenna_flags(const struct il_priv *il);
|
|
int il3945_init_hw_rate_table(struct il_priv *il);
|
|
void il3945_reg_txpower_periodic(struct il_priv *il);
|
|
int il3945_txpower_set_from_eeprom(struct il_priv *il);
|
|
|
|
int il3945_rs_next_rate(struct il_priv *il, int rate);
|
|
|
|
/* scanning */
|
|
int il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif);
|
|
void il3945_post_scan(struct il_priv *il);
|
|
|
|
/* rates */
|
|
extern const struct il3945_rate_info il3945_rates[RATE_COUNT_3945];
|
|
|
|
/* RSSI to dBm */
|
|
#define IL39_RSSI_OFFSET 95
|
|
|
|
/*
|
|
* EEPROM related constants, enums, and structures.
|
|
*/
|
|
#define EEPROM_SKU_CAP_OP_MODE_MRC (1 << 7)
|
|
|
|
/*
|
|
* Mapping of a Tx power level, at factory calibration temperature,
|
|
* to a radio/DSP gain table idx.
|
|
* One for each of 5 "sample" power levels in each band.
|
|
* v_det is measured at the factory, using the 3945's built-in power amplifier
|
|
* (PA) output voltage detector. This same detector is used during Tx of
|
|
* long packets in normal operation to provide feedback as to proper output
|
|
* level.
|
|
* Data copied from EEPROM.
|
|
* DO NOT ALTER THIS STRUCTURE!!!
|
|
*/
|
|
struct il3945_eeprom_txpower_sample {
|
|
u8 gain_idx; /* idx into power (gain) setup table ... */
|
|
s8 power; /* ... for this pwr level for this chnl group */
|
|
u16 v_det; /* PA output voltage */
|
|
} __packed;
|
|
|
|
/*
|
|
* Mappings of Tx power levels -> nominal radio/DSP gain table idxes.
|
|
* One for each channel group (a.k.a. "band") (1 for BG, 4 for A).
|
|
* Tx power setup code interpolates between the 5 "sample" power levels
|
|
* to determine the nominal setup for a requested power level.
|
|
* Data copied from EEPROM.
|
|
* DO NOT ALTER THIS STRUCTURE!!!
|
|
*/
|
|
struct il3945_eeprom_txpower_group {
|
|
struct il3945_eeprom_txpower_sample samples[5]; /* 5 power levels */
|
|
s32 a, b, c, d, e; /* coefficients for voltage->power
|
|
* formula (signed) */
|
|
s32 Fa, Fb, Fc, Fd, Fe; /* these modify coeffs based on
|
|
* frequency (signed) */
|
|
s8 saturation_power; /* highest power possible by h/w in this
|
|
* band */
|
|
u8 group_channel; /* "representative" channel # in this band */
|
|
s16 temperature; /* h/w temperature at factory calib this band
|
|
* (signed) */
|
|
} __packed;
|
|
|
|
/*
|
|
* Temperature-based Tx-power compensation data, not band-specific.
|
|
* These coefficients are use to modify a/b/c/d/e coeffs based on
|
|
* difference between current temperature and factory calib temperature.
|
|
* Data copied from EEPROM.
|
|
*/
|
|
struct il3945_eeprom_temperature_corr {
|
|
u32 Ta;
|
|
u32 Tb;
|
|
u32 Tc;
|
|
u32 Td;
|
|
u32 Te;
|
|
} __packed;
|
|
|
|
/*
|
|
* EEPROM map
|
|
*/
|
|
struct il3945_eeprom {
|
|
u8 reserved0[16];
|
|
u16 device_id; /* abs.ofs: 16 */
|
|
u8 reserved1[2];
|
|
u16 pmc; /* abs.ofs: 20 */
|
|
u8 reserved2[20];
|
|
u8 mac_address[6]; /* abs.ofs: 42 */
|
|
u8 reserved3[58];
|
|
u16 board_revision; /* abs.ofs: 106 */
|
|
u8 reserved4[11];
|
|
u8 board_pba_number[9]; /* abs.ofs: 119 */
|
|
u8 reserved5[8];
|
|
u16 version; /* abs.ofs: 136 */
|
|
u8 sku_cap; /* abs.ofs: 138 */
|
|
u8 leds_mode; /* abs.ofs: 139 */
|
|
u16 oem_mode;
|
|
u16 wowlan_mode; /* abs.ofs: 142 */
|
|
u16 leds_time_interval; /* abs.ofs: 144 */
|
|
u8 leds_off_time; /* abs.ofs: 146 */
|
|
u8 leds_on_time; /* abs.ofs: 147 */
|
|
u8 almgor_m_version; /* abs.ofs: 148 */
|
|
u8 antenna_switch_type; /* abs.ofs: 149 */
|
|
u8 reserved6[42];
|
|
u8 sku_id[4]; /* abs.ofs: 192 */
|
|
|
|
/*
|
|
* Per-channel regulatory data.
|
|
*
|
|
* Each channel that *might* be supported by 3945 has a fixed location
|
|
* in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
|
|
* txpower (MSB).
|
|
*
|
|
* Entries immediately below are for 20 MHz channel width.
|
|
*
|
|
* 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
|
|
*/
|
|
u16 band_1_count; /* abs.ofs: 196 */
|
|
struct il_eeprom_channel band_1_channels[14]; /* abs.ofs: 198 */
|
|
|
|
/*
|
|
* 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
|
|
* 5.0 GHz channels 7, 8, 11, 12, 16
|
|
* (4915-5080MHz) (none of these is ever supported)
|
|
*/
|
|
u16 band_2_count; /* abs.ofs: 226 */
|
|
struct il_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */
|
|
|
|
/*
|
|
* 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
|
|
* (5170-5320MHz)
|
|
*/
|
|
u16 band_3_count; /* abs.ofs: 254 */
|
|
struct il_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */
|
|
|
|
/*
|
|
* 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
|
|
* (5500-5700MHz)
|
|
*/
|
|
u16 band_4_count; /* abs.ofs: 280 */
|
|
struct il_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */
|
|
|
|
/*
|
|
* 5.7 GHz channels 145, 149, 153, 157, 161, 165
|
|
* (5725-5825MHz)
|
|
*/
|
|
u16 band_5_count; /* abs.ofs: 304 */
|
|
struct il_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */
|
|
|
|
u8 reserved9[194];
|
|
|
|
/*
|
|
* 3945 Txpower calibration data.
|
|
*/
|
|
#define IL_NUM_TX_CALIB_GROUPS 5
|
|
struct il3945_eeprom_txpower_group groups[IL_NUM_TX_CALIB_GROUPS];
|
|
/* abs.ofs: 512 */
|
|
struct il3945_eeprom_temperature_corr corrections; /* abs.ofs: 832 */
|
|
u8 reserved16[172]; /* fill out to full 1024 byte block */
|
|
} __packed;
|
|
|
|
#define IL3945_EEPROM_IMG_SIZE 1024
|
|
|
|
/* End of EEPROM */
|
|
|
|
#define PCI_CFG_REV_ID_BIT_BASIC_SKU (0x40) /* bit 6 */
|
|
#define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */
|
|
|
|
/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */
|
|
#define IL39_NUM_QUEUES 5
|
|
#define IL39_CMD_QUEUE_NUM 4
|
|
|
|
#define IL_DEFAULT_TX_RETRY 15
|
|
|
|
/*********************************************/
|
|
|
|
#define RFD_SIZE 4
|
|
#define NUM_TFD_CHUNKS 4
|
|
|
|
#define TFD_CTL_COUNT_SET(n) (n << 24)
|
|
#define TFD_CTL_COUNT_GET(ctl) ((ctl >> 24) & 7)
|
|
#define TFD_CTL_PAD_SET(n) (n << 28)
|
|
#define TFD_CTL_PAD_GET(ctl) (ctl >> 28)
|
|
|
|
/* Sizes and addresses for instruction and data memory (SRAM) in
|
|
* 3945's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */
|
|
#define IL39_RTC_INST_LOWER_BOUND (0x000000)
|
|
#define IL39_RTC_INST_UPPER_BOUND (0x014000)
|
|
|
|
#define IL39_RTC_DATA_LOWER_BOUND (0x800000)
|
|
#define IL39_RTC_DATA_UPPER_BOUND (0x808000)
|
|
|
|
#define IL39_RTC_INST_SIZE (IL39_RTC_INST_UPPER_BOUND - \
|
|
IL39_RTC_INST_LOWER_BOUND)
|
|
#define IL39_RTC_DATA_SIZE (IL39_RTC_DATA_UPPER_BOUND - \
|
|
IL39_RTC_DATA_LOWER_BOUND)
|
|
|
|
#define IL39_MAX_INST_SIZE IL39_RTC_INST_SIZE
|
|
#define IL39_MAX_DATA_SIZE IL39_RTC_DATA_SIZE
|
|
|
|
/* Size of uCode instruction memory in bootstrap state machine */
|
|
#define IL39_MAX_BSM_SIZE IL39_RTC_INST_SIZE
|
|
|
|
static inline int
|
|
il3945_hw_valid_rtc_data_addr(u32 addr)
|
|
{
|
|
return (addr >= IL39_RTC_DATA_LOWER_BOUND &&
|
|
addr < IL39_RTC_DATA_UPPER_BOUND);
|
|
}
|
|
|
|
/* Base physical address of il3945_shared is provided to FH39_TSSR_CBB_BASE
|
|
* and &il3945_shared.rx_read_ptr[0] is provided to FH39_RCSR_RPTR_ADDR(0) */
|
|
struct il3945_shared {
|
|
__le32 tx_base_ptr[8];
|
|
} __packed;
|
|
|
|
/************************************/
|
|
/* iwl3945 Flow Handler Definitions */
|
|
/************************************/
|
|
|
|
/**
|
|
* This I/O area is directly read/writable by driver (e.g. Linux uses writel())
|
|
* Addresses are offsets from device's PCI hardware base address.
|
|
*/
|
|
#define FH39_MEM_LOWER_BOUND (0x0800)
|
|
#define FH39_MEM_UPPER_BOUND (0x1000)
|
|
|
|
#define FH39_CBCC_TBL (FH39_MEM_LOWER_BOUND + 0x140)
|
|
#define FH39_TFDB_TBL (FH39_MEM_LOWER_BOUND + 0x180)
|
|
#define FH39_RCSR_TBL (FH39_MEM_LOWER_BOUND + 0x400)
|
|
#define FH39_RSSR_TBL (FH39_MEM_LOWER_BOUND + 0x4c0)
|
|
#define FH39_TCSR_TBL (FH39_MEM_LOWER_BOUND + 0x500)
|
|
#define FH39_TSSR_TBL (FH39_MEM_LOWER_BOUND + 0x680)
|
|
|
|
/* TFDB (Transmit Frame Buffer Descriptor) */
|
|
#define FH39_TFDB(_ch, buf) (FH39_TFDB_TBL + \
|
|
((_ch) * 2 + (buf)) * 0x28)
|
|
#define FH39_TFDB_CHNL_BUF_CTRL_REG(_ch) (FH39_TFDB_TBL + 0x50 * (_ch))
|
|
|
|
/* CBCC channel is [0,2] */
|
|
#define FH39_CBCC(_ch) (FH39_CBCC_TBL + (_ch) * 0x8)
|
|
#define FH39_CBCC_CTRL(_ch) (FH39_CBCC(_ch) + 0x00)
|
|
#define FH39_CBCC_BASE(_ch) (FH39_CBCC(_ch) + 0x04)
|
|
|
|
/* RCSR channel is [0,2] */
|
|
#define FH39_RCSR(_ch) (FH39_RCSR_TBL + (_ch) * 0x40)
|
|
#define FH39_RCSR_CONFIG(_ch) (FH39_RCSR(_ch) + 0x00)
|
|
#define FH39_RCSR_RBD_BASE(_ch) (FH39_RCSR(_ch) + 0x04)
|
|
#define FH39_RCSR_WPTR(_ch) (FH39_RCSR(_ch) + 0x20)
|
|
#define FH39_RCSR_RPTR_ADDR(_ch) (FH39_RCSR(_ch) + 0x24)
|
|
|
|
#define FH39_RSCSR_CHNL0_WPTR (FH39_RCSR_WPTR(0))
|
|
|
|
/* RSSR */
|
|
#define FH39_RSSR_CTRL (FH39_RSSR_TBL + 0x000)
|
|
#define FH39_RSSR_STATUS (FH39_RSSR_TBL + 0x004)
|
|
|
|
/* TCSR */
|
|
#define FH39_TCSR(_ch) (FH39_TCSR_TBL + (_ch) * 0x20)
|
|
#define FH39_TCSR_CONFIG(_ch) (FH39_TCSR(_ch) + 0x00)
|
|
#define FH39_TCSR_CREDIT(_ch) (FH39_TCSR(_ch) + 0x04)
|
|
#define FH39_TCSR_BUFF_STTS(_ch) (FH39_TCSR(_ch) + 0x08)
|
|
|
|
/* TSSR */
|
|
#define FH39_TSSR_CBB_BASE (FH39_TSSR_TBL + 0x000)
|
|
#define FH39_TSSR_MSG_CONFIG (FH39_TSSR_TBL + 0x008)
|
|
#define FH39_TSSR_TX_STATUS (FH39_TSSR_TBL + 0x010)
|
|
|
|
/* DBM */
|
|
|
|
#define FH39_SRVC_CHNL (6)
|
|
|
|
#define FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE (20)
|
|
#define FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH (4)
|
|
|
|
#define FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN (0x08000000)
|
|
|
|
#define FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE (0x80000000)
|
|
|
|
#define FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE (0x20000000)
|
|
|
|
#define FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 (0x01000000)
|
|
|
|
#define FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST (0x00001000)
|
|
|
|
#define FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH (0x00000000)
|
|
|
|
#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000)
|
|
#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRIVER (0x00000001)
|
|
|
|
#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000)
|
|
#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008)
|
|
|
|
#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000)
|
|
|
|
#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000)
|
|
|
|
#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000)
|
|
#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000)
|
|
|
|
#define FH39_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00004000)
|
|
|
|
#define FH39_TCSR_CHNL_TX_BUF_STS_REG_BIT_TFDB_WPTR (0x00000001)
|
|
|
|
#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON (0xFF000000)
|
|
#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON (0x00FF0000)
|
|
|
|
#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B (0x00000400)
|
|
|
|
#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON (0x00000100)
|
|
#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON (0x00000080)
|
|
|
|
#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH (0x00000020)
|
|
#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH (0x00000005)
|
|
|
|
#define FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) (BIT(_ch) << 24)
|
|
#define FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch) (BIT(_ch) << 16)
|
|
|
|
#define FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_ch) \
|
|
(FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) | \
|
|
FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch))
|
|
|
|
#define FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
|
|
|
|
struct il3945_tfd_tb {
|
|
__le32 addr;
|
|
__le32 len;
|
|
} __packed;
|
|
|
|
struct il3945_tfd {
|
|
__le32 control_flags;
|
|
struct il3945_tfd_tb tbs[4];
|
|
u8 __pad[28];
|
|
} __packed;
|
|
|
|
#ifdef CONFIG_IWLEGACY_DEBUGFS
|
|
extern const struct il_debugfs_ops il3945_debugfs_ops;
|
|
#endif
|
|
|
|
#endif
|