linux_dsm_epyc7002/drivers/mtd/nand
Linus Torvalds 3fd14cdcc0 MTD changes:
Core:
     * Remove support for asynchronous erase (not implemented by any of
       the existing drivers anyway)
     * Remove Cyrille from the list of SPI NOR and MTD maintainers
     * Fix kernel doc headers
     * Allow users to define the partitions parsers they want to test
       through a DT property (compatible of the partitions subnode)
     * Remove the bfin-async-flash driver (the only architecture using
       it has been removed)
     * Fix pagetest test
     * Add extra checks in mtd_erase()
     * Simplify the MTD partition creation logic and get rid of
       mtd_add_device_partitions()
 
    Drivers:
     * Add endianness information to the physmap DT binding
     * Add Eon EN29LV400A IDs to JEDEC probe logic
     * Use %*ph where appropriate
 
 SPI NOR changes:
   Drivers:
     * Make fsl-quaspi assign different names to MTD devices connected
       to the same QSPI controller
     * Remove an unneeded driver.bus assigned in the fsl-qspi driver
 
 NAND changes:
   Core:
     * Prepare arrival of the SPI NAND subsystem by implementing a
       generic (interface-agnostic) layer to ease manipulation of NAND
       devices
     * Move onenand code base to the drivers/mtd/nand/ dir
     * Rework timing mode selection
     * Provide a generic way for NAND chip drivers to flag a specific
       GET/SET FEATURE operation as supported/unsupported
     * Stop embedding ONFI/JEDEC param page in nand_chip
 
   Drivers:
     * Rework/cleanup of the mxc driver
     * Various cleanups in the vf610 driver
     * Migrate the fsmc and vf610 to ->exec_op()
     * Get rid of the pxa driver (replaced by marvell_nand)
     * Support ->setup_data_interface() in the GPMI driver
     * Fix probe error path in several drivers
     * Remove support for unused hw_syndrome mode in sunxi_nand
     * Various minor improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQI5BAABCAAjBQJaxTXfHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ
 Ze02AX4ItwDeFhAAs+OmGip0LHk+D7gFCBONtypOGRi0nmGsi6PkhKtUZBob6/Y2
 JoJhTrHx/LsRpqcuh3Y8KSCp0CG5WlZX2m1RU1yrcqiWvTfiXHlv6aQGfiE/esRb
 Ei4QNiND8hg+hyzc6I5wRrAuJ7jPP5BanX+n9TyvygaA1Ic5pcur0gssoYKeJTia
 18pUV+RLe67wfP02uT0GJvmXd5ecIpu0OVhmJPye2UQqnfl+eiJ2zI4TJAZN3zRW
 tD9XiX3/GP8oCnvC+1kZw48a2c/qiHs/DKCdDcH6SDTKzKha4zCgaX4220X3AqPK
 rScrFTKxiCa1utZPn9EplnW6ZW3Ud46GqReWGRQZuyphu/ntdkNim7nuJMUZfEFL
 RFtMLhXDs1aXUaYJ6F3YQeajHxVU6Ugl34UQCraCXbfmzqCkaKfgXm3EVb9d2duY
 rCkrS5N4gSQXp5SMvc0aiu2TnsRX2OCthGg0NBdHG9AaVhwuj0neeSFQ/XFPxOeh
 5jQKo4umR7tr2Md7osSx0PVxVo8uO5smqcl90SsdwrjxQxL7z1u/SJBjRf6pJDzQ
 cR1o+H9jBXecqD6m+dN3H/h0sMwHzefsASkxYNxl2OeRGYsJvBpuoQF8yUD9jnRS
 AzHhWhUNo8g3FxDe7kKgsMXoqnr/pKopMCRxVbeEkhDFNsTvBde10/Xo09U=
 =EG7L
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "MTD Core:
   - Remove support for asynchronous erase (not implemented by any of
     the existing drivers anyway)
   - Remove Cyrille from the list of SPI NOR and MTD maintainers
   - Fix kernel doc headers
   - Allow users to define the partitions parsers they want to test
     through a DT property (compatible of the partitions subnode)
   - Remove the bfin-async-flash driver (the only architecture using it
     has been removed)
   - Fix pagetest test
   - Add extra checks in mtd_erase()
   - Simplify the MTD partition creation logic and get rid of
     mtd_add_device_partitions()

  MTD Drivers:
   - Add endianness information to the physmap DT binding
   - Add Eon EN29LV400A IDs to JEDEC probe logic
   - Use %*ph where appropriate

  SPI NOR Drivers:
   - Make fsl-quaspi assign different names to MTD devices connected to
     the same QSPI controller
   - Remove an unneeded driver.bus assigned in the fsl-qspi driver

  NAND Core:
   - Prepare arrival of the SPI NAND subsystem by implementing a generic
     (interface-agnostic) layer to ease manipulation of NAND devices
   - Move onenand code base to the drivers/mtd/nand/ dir
   - Rework timing mode selection
   - Provide a generic way for NAND chip drivers to flag a specific
     GET/SET FEATURE operation as supported/unsupported
   - Stop embedding ONFI/JEDEC param page in nand_chip

  NAND Drivers:
   - Rework/cleanup of the mxc driver
   - Various cleanups in the vf610 driver
   - Migrate the fsmc and vf610 to ->exec_op()
   - Get rid of the pxa driver (replaced by marvell_nand)
   - Support ->setup_data_interface() in the GPMI driver
   - Fix probe error path in several drivers
   - Remove support for unused hw_syndrome mode in sunxi_nand
   - Various minor improvements"

* tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits)
  dt-bindings: fsl-quadspi: Add the example of two SPI NOR
  mtd: fsl-quadspi: Distinguish the mtd device names
  mtd: nand: Fix some function description mismatches in core.c
  mtd: fsl-quadspi: Remove unneeded driver.bus assignment
  mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk
  mtd: rawnand: s3c2410: enhance the probe function error path
  mtd: rawnand: tango: fix probe function error path
  mtd: rawnand: sh_flctl: fix the probe function error path
  mtd: rawnand: omap2: fix the probe function error path
  mtd: rawnand: mxc: fix probe function error path
  mtd: rawnand: denali: fix probe function error path
  mtd: rawnand: davinci: fix probe function error path
  mtd: rawnand: cafe: fix probe function error path
  mtd: rawnand: brcmnand: fix probe function error path
  mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode
  mtd: rawnand: marvell: Fix clock resource by adding a register clock
  mtd: ftl: Use DIV_ROUND_UP()
  mtd: Fix some function description mismatches in mtdcore.c
  mtd: physmap_of: update struct map_info's swap as per map requirement
  dt-bindings: mtd-physmap: Add endianness supports
  ...
2018-04-06 12:15:41 -07:00
..
onenand Core changes: 2018-04-04 22:11:36 +02:00
raw MTD changes: 2018-04-06 12:15:41 -07:00
bbt.c mtd: nand: Add core infrastructure to deal with NAND devices 2018-02-16 10:10:53 +01:00
core.c mtd: nand: Fix some function description mismatches in core.c 2018-03-29 19:41:57 +02:00
Kconfig mtd: Move onenand code base to drivers/mtd/nand/onenand 2018-03-15 15:40:37 +01:00
Makefile mtd: Move onenand code base to drivers/mtd/nand/onenand 2018-03-15 15:40:37 +01:00