linux_dsm_epyc7002/arch/blackfin/mach-bf609/dpm.S
Steven Miao 68bcdd48a2 dpm: deepsleep: reserve stack
Reserve 12 bytes on the stack for deepsleep use.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:53 +08:00

158 lines
2.7 KiB
ArmAsm

#include <linux/linkage.h>
#include <asm/blackfin.h>
#include <asm/dpmc.h>
#include <asm/context.S>
#define PM_STACK (COREA_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
.section .l1.text
ENTRY(_enter_hibernate)
/* switch stack to L1 scratch, prepare for ddr srfr */
P0.H = HI(PM_STACK);
P0.L = LO(PM_STACK);
SP = P0;
call _bf609_ddr_sr;
call _bfin_hibernate_syscontrol;
P0.H = HI(DPM0_RESTORE4);
P0.L = LO(DPM0_RESTORE4);
P1.H = _bf609_pm_data;
P1.L = _bf609_pm_data;
[P0] = P1;
P0.H = HI(DPM0_CTL);
P0.L = LO(DPM0_CTL);
R3.H = HI(0x00000010);
R3.L = LO(0x00000010);
bfin_init_pm_bench_cycles;
[P0] = R3;
SSYNC;
ENDPROC(_enter_hibernate)
/* DPM wake up interrupt won't wake up core on bf60x if its core IMASK
* is disabled. This behavior differ from bf5xx serial processor.
*/
ENTRY(_dummy_deepsleep)
[--sp] = SYSCFG;
[--sp] = (R7:0,P5:0);
cli r0;
/* get wake up interrupt ID */
P0.l = LO(SEC_SCI_BASE + SEC_CSID);
P0.h = HI(SEC_SCI_BASE + SEC_CSID);
R0 = [P0];
/* ACK wake up interrupt in SEC */
P1.l = LO(SEC_END);
P1.h = HI(SEC_END);
[P1] = R0;
SSYNC;
/* restore EVT 11 entry */
p0.h = hi(EVT11);
p0.l = lo(EVT11);
p1.h = _evt_evt11;
p1.l = _evt_evt11;
[p0] = p1;
SSYNC;
(R7:0,P5:0) = [sp++];
SYSCFG = [sp++];
RTI;
ENDPROC(_dummy_deepsleep)
ENTRY(_enter_deepsleep)
LINK 0xC;
[--sp] = (R7:0,P5:0);
/* Change EVT 11 entry to dummy handler for wake up event */
p0.h = hi(EVT11);
p0.l = lo(EVT11);
p1.h = _dummy_deepsleep;
p1.l = _dummy_deepsleep;
[p0] = p1;
P0.H = HI(PM_STACK);
P0.L = LO(PM_STACK);
EX_SCRATCH_REG = SP;
SP = P0;
SSYNC;
/* should put ddr to self refresh mode before sleep */
call _bf609_ddr_sr;
/* Set DPM controller to deep sleep mode */
P0.H = HI(DPM0_CTL);
P0.L = LO(DPM0_CTL);
R3.H = HI(0x00000008);
R3.L = LO(0x00000008);
[P0] = R3;
CSYNC;
/* Enable evt 11 in IMASK before idle, otherwise core doesn't wake up. */
r0.l = 0x800;
r0.h = 0;
sti r0;
SSYNC;
bfin_init_pm_bench_cycles;
/* Fall into deep sleep in idle*/
idle;
SSYNC;
/* Restore PLL after wake up from deep sleep */
call _bf609_resume_ccbuf;
/* turn ddr out of self refresh mode */
call _bf609_ddr_sr_exit;
SP = EX_SCRATCH_REG;
(R7:0,P5:0) = [SP++];
UNLINK;
RTS;
ENDPROC(_enter_deepsleep)
.section .text
ENTRY(_bf609_hibernate)
bfin_cpu_reg_save;
bfin_core_mmr_save;
P0.H = _bf609_pm_data;
P0.L = _bf609_pm_data;
R1.H = 0xDEAD;
R1.L = 0xBEEF;
R2.H = .Lpm_resume_here;
R2.L = .Lpm_resume_here;
[P0++] = R1;
[P0++] = R2;
[P0++] = SP;
P1.H = _enter_hibernate;
P1.L = _enter_hibernate;
call (P1);
.Lpm_resume_here:
bfin_core_mmr_restore;
bfin_cpu_reg_restore;
[--sp] = RETI; /* Clear Global Interrupt Disable */
SP += 4;
RTS;
ENDPROC(_bf609_hibernate)