linux_dsm_epyc7002/arch/x86/include/asm/perf_counter.h
Paul Mackerras b6c5a71da1 perf_counter: abstract wakeup flag setting in core to fix powerpc build
Impact: build fix for powerpc

Commit bd753921015e7905 ("perf_counter: software counter event
infrastructure") introduced a use of TIF_PERF_COUNTERS into the core
perfcounter code.  This breaks the build on powerpc because we use
a flag in a per-cpu area to signal wakeups on powerpc rather than
a thread_info flag, because the thread_info flags have to be
manipulated with atomic operations and are thus slower than per-cpu
flags.

This fixes the by changing the core to use an abstracted
set_perf_counter_pending() function, which is defined on x86 to set
the TIF_PERF_COUNTERS flag and on powerpc to set the per-cpu flag
(paca->perf_counter_pending).  It changes the previous powerpc
definition of set_perf_counter_pending to not take an argument and
adds a clear_perf_counter_pending, so as to simplify the definition
on x86.

On x86, set_perf_counter_pending() is defined as a macro.  Defining
it as a static inline in arch/x86/include/asm/perf_counters.h causes
compile failures because <asm/perf_counters.h> gets included early in
<linux/sched.h>, and the definitions of set_tsk_thread_flag etc. are
therefore not available in <asm/perf_counters.h>.  (On powerpc this
problem is avoided by defining set_perf_counter_pending etc. in
<asm/hw_irq.h>.)

Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-06 09:30:14 +02:00

99 lines
2.5 KiB
C

#ifndef _ASM_X86_PERF_COUNTER_H
#define _ASM_X86_PERF_COUNTER_H
/*
* Performance counter hw details:
*/
#define X86_PMC_MAX_GENERIC 8
#define X86_PMC_MAX_FIXED 3
#define X86_PMC_IDX_GENERIC 0
#define X86_PMC_IDX_FIXED 32
#define X86_PMC_IDX_MAX 64
#define MSR_ARCH_PERFMON_PERFCTR0 0xc1
#define MSR_ARCH_PERFMON_PERFCTR1 0xc2
#define MSR_ARCH_PERFMON_EVENTSEL0 0x186
#define MSR_ARCH_PERFMON_EVENTSEL1 0x187
#define ARCH_PERFMON_EVENTSEL0_ENABLE (1 << 22)
#define ARCH_PERFMON_EVENTSEL_INT (1 << 20)
#define ARCH_PERFMON_EVENTSEL_OS (1 << 17)
#define ARCH_PERFMON_EVENTSEL_USR (1 << 16)
/*
* Includes eventsel and unit mask as well:
*/
#define ARCH_PERFMON_EVENT_MASK 0xffff
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL 0x3c
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK (0x00 << 8)
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 0
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
#define ARCH_PERFMON_BRANCH_MISSES_RETIRED 6
/*
* Intel "Architectural Performance Monitoring" CPUID
* detection/enumeration details:
*/
union cpuid10_eax {
struct {
unsigned int version_id:8;
unsigned int num_counters:8;
unsigned int bit_width:8;
unsigned int mask_length:8;
} split;
unsigned int full;
};
union cpuid10_edx {
struct {
unsigned int num_counters_fixed:4;
unsigned int reserved:28;
} split;
unsigned int full;
};
/*
* Fixed-purpose performance counters:
*/
/*
* All 3 fixed-mode PMCs are configured via this single MSR:
*/
#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL 0x38d
/*
* The counts are available in three separate MSRs:
*/
/* Instr_Retired.Any: */
#define MSR_ARCH_PERFMON_FIXED_CTR0 0x309
#define X86_PMC_IDX_FIXED_INSTRUCTIONS (X86_PMC_IDX_FIXED + 0)
/* CPU_CLK_Unhalted.Core: */
#define MSR_ARCH_PERFMON_FIXED_CTR1 0x30a
#define X86_PMC_IDX_FIXED_CPU_CYCLES (X86_PMC_IDX_FIXED + 1)
/* CPU_CLK_Unhalted.Ref: */
#define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b
#define X86_PMC_IDX_FIXED_BUS_CYCLES (X86_PMC_IDX_FIXED + 2)
#define set_perf_counter_pending() \
set_tsk_thread_flag(current, TIF_PERF_COUNTERS);
#ifdef CONFIG_PERF_COUNTERS
extern void init_hw_perf_counters(void);
extern void perf_counters_lapic_init(int nmi);
#else
static inline void init_hw_perf_counters(void) { }
static inline void perf_counters_lapic_init(int nmi) { }
#endif
#endif /* _ASM_X86_PERF_COUNTER_H */