mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 04:05:21 +07:00
3f551d6aca
The imx6dl is a derivative of imx6q with very limited difference. These two SoCs are so compatible that they can be handled as one platform in software. That said, we will not have target SOC_IMX6DL but just reusing SOC_IMX6Q. That's why the pinctrl-imx6dl driver is added here with symbol PINCTRL_IMX6Q controlling the build of it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
39 lines
1.5 KiB
Plaintext
39 lines
1.5 KiB
Plaintext
* Freescale IMX6 DualLite/Solo IOMUX Controller
|
|
|
|
Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
|
|
and usage.
|
|
|
|
Required properties:
|
|
- compatible: "fsl,imx6dl-iomuxc"
|
|
- fsl,pins: two integers array, represents a group of pins mux and config
|
|
setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
|
|
pin working on a specific function, CONFIG is the pad setting value like
|
|
pull-up for this pin. Please refer to imx6dl datasheet for the valid pad
|
|
config settings.
|
|
|
|
CONFIG bits definition:
|
|
PAD_CTL_HYS (1 << 16)
|
|
PAD_CTL_PUS_100K_DOWN (0 << 14)
|
|
PAD_CTL_PUS_47K_UP (1 << 14)
|
|
PAD_CTL_PUS_100K_UP (2 << 14)
|
|
PAD_CTL_PUS_22K_UP (3 << 14)
|
|
PAD_CTL_PUE (1 << 13)
|
|
PAD_CTL_PKE (1 << 12)
|
|
PAD_CTL_ODE (1 << 11)
|
|
PAD_CTL_SPEED_LOW (1 << 6)
|
|
PAD_CTL_SPEED_MED (2 << 6)
|
|
PAD_CTL_SPEED_HIGH (3 << 6)
|
|
PAD_CTL_DSE_DISABLE (0 << 3)
|
|
PAD_CTL_DSE_240ohm (1 << 3)
|
|
PAD_CTL_DSE_120ohm (2 << 3)
|
|
PAD_CTL_DSE_80ohm (3 << 3)
|
|
PAD_CTL_DSE_60ohm (4 << 3)
|
|
PAD_CTL_DSE_48ohm (5 << 3)
|
|
PAD_CTL_DSE_40ohm (6 << 3)
|
|
PAD_CTL_DSE_34ohm (7 << 3)
|
|
PAD_CTL_SRE_FAST (1 << 0)
|
|
PAD_CTL_SRE_SLOW (0 << 0)
|
|
|
|
Refer to imx6dl-pinfunc.h in device tree source folder for all available
|
|
imx6dl PIN_FUNC_ID.
|