mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 03:45:28 +07:00
fd6765b4c9
Update dt-binding document for GPIO interrupt controller of Meson-A1 SoCs Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191216123645.10099-2-qianggui.song@amlogic.com
38 lines
1.7 KiB
Plaintext
38 lines
1.7 KiB
Plaintext
Amlogic meson GPIO interrupt controller
|
|
|
|
Meson SoCs contains an interrupt controller which is able to watch the SoC
|
|
pads and generate an interrupt on edge or level. The controller is essentially
|
|
a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
|
|
or level and polarity. It does not expose all 256 mux inputs because the
|
|
documentation shows that the upper part is not mapped to any pad. The actual
|
|
number of interrupt exposed depends on the SoC.
|
|
|
|
Required properties:
|
|
|
|
- compatible : must have "amlogic,meson8-gpio-intc" and either
|
|
"amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
|
|
"amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
|
|
"amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
|
|
"amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
|
|
"amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
|
|
"amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
|
|
"amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
|
|
"amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
|
|
- reg : Specifies base physical address and size of the registers.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- #interrupt-cells : Specifies the number of cells needed to encode an
|
|
interrupt source. The value must be 2.
|
|
- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
|
|
are the hwirqs used on the parent interrupt controller.
|
|
|
|
Example:
|
|
|
|
gpio_interrupt: interrupt-controller@9880 {
|
|
compatible = "amlogic,meson-gxbb-gpio-intc",
|
|
"amlogic,meson-gpio-intc";
|
|
reg = <0x0 0x9880 0x0 0x10>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
|
|
};
|