mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 03:55:20 +07:00
86619c3859
This adds a new binding for Himax HX8357D display panels. It includes a compatible string for one display (more can be added in the future). The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch Screen for Raspberry Pi. [1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads This binding is closely modeled after the ili9341 binding, for a similar product from adafruit. The primary difference is that the hx8357d doesn't have a reset line that I can find in the schematics. v2: Document the "reg" property (requested by Rob), fix commit message typo (Noralf) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-2-eric@anholt.net Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org>
27 lines
824 B
Plaintext
27 lines
824 B
Plaintext
Himax HX8357D display panels
|
|
|
|
This binding is for display panels using a Himax HX8357D controller in SPI
|
|
mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
|
|
|
|
Required properties:
|
|
- compatible: "adafruit,yx350hv15", "himax,hx8357d"
|
|
- dc-gpios: D/C pin
|
|
- reg: address of the panel on the SPI bus
|
|
|
|
The node for this driver must be a child node of a SPI controller, hence
|
|
all mandatory properties described in ../spi/spi-bus.txt must be specified.
|
|
|
|
Optional properties:
|
|
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
|
|
- backlight: phandle of the backlight device attached to the panel
|
|
|
|
Example:
|
|
display@0{
|
|
compatible = "adafruit,yx350hv15", "himax,hx8357d";
|
|
reg = <0>;
|
|
spi-max-frequency = <32000000>;
|
|
dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
|
|
rotation = <90>;
|
|
backlight = <&backlight>;
|
|
};
|