mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-25 10:00:53 +07:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
666 lines
15 KiB
C
666 lines
15 KiB
C
/*
|
|
*
|
|
* Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
|
|
*
|
|
* Module name: oaknet.c
|
|
*
|
|
* Description:
|
|
* Driver for the National Semiconductor DP83902AV Ethernet controller
|
|
* on-board the IBM PowerPC "Oak" evaluation board. Adapted from the
|
|
* various other 8390 drivers written by Donald Becker and Paul Gortmaker.
|
|
*
|
|
* Additional inspiration from the "tcd8390.c" driver from TiVo, Inc.
|
|
* and "enetLib.c" from IBM.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/board.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "8390.h"
|
|
|
|
|
|
/* Preprocessor Defines */
|
|
|
|
#if !defined(TRUE) || TRUE != 1
|
|
#define TRUE 1
|
|
#endif
|
|
|
|
#if !defined(FALSE) || FALSE != 0
|
|
#define FALSE 0
|
|
#endif
|
|
|
|
#define OAKNET_START_PG 0x20 /* First page of TX buffer */
|
|
#define OAKNET_STOP_PG 0x40 /* Last pagge +1 of RX ring */
|
|
|
|
#define OAKNET_WAIT (2 * HZ / 100) /* 20 ms */
|
|
|
|
/* Experimenting with some fixes for a broken driver... */
|
|
|
|
#define OAKNET_DISINT
|
|
#define OAKNET_HEADCHECK
|
|
#define OAKNET_RWFIX
|
|
|
|
|
|
/* Global Variables */
|
|
|
|
static const char *name = "National DP83902AV";
|
|
|
|
static struct net_device *oaknet_devs;
|
|
|
|
|
|
/* Function Prototypes */
|
|
|
|
static int oaknet_open(struct net_device *dev);
|
|
static int oaknet_close(struct net_device *dev);
|
|
|
|
static void oaknet_reset_8390(struct net_device *dev);
|
|
static void oaknet_get_8390_hdr(struct net_device *dev,
|
|
struct e8390_pkt_hdr *hdr, int ring_page);
|
|
static void oaknet_block_input(struct net_device *dev, int count,
|
|
struct sk_buff *skb, int ring_offset);
|
|
static void oaknet_block_output(struct net_device *dev, int count,
|
|
const unsigned char *buf, int start_page);
|
|
|
|
static void oaknet_dma_error(struct net_device *dev, const char *name);
|
|
|
|
|
|
/*
|
|
* int oaknet_init()
|
|
*
|
|
* Description:
|
|
* This routine performs all the necessary platform-specific initiali-
|
|
* zation and set-up for the IBM "Oak" evaluation board's National
|
|
* Semiconductor DP83902AV "ST-NIC" Ethernet controller.
|
|
*
|
|
* Input(s):
|
|
* N/A
|
|
*
|
|
* Output(s):
|
|
* N/A
|
|
*
|
|
* Returns:
|
|
* 0 if OK, otherwise system error number on error.
|
|
*
|
|
*/
|
|
static int __init oaknet_init(void)
|
|
{
|
|
register int i;
|
|
int reg0, regd;
|
|
int ret = -ENOMEM;
|
|
struct net_device *dev;
|
|
#if 0
|
|
unsigned long ioaddr = OAKNET_IO_BASE;
|
|
#else
|
|
unsigned long ioaddr = ioremap(OAKNET_IO_BASE, OAKNET_IO_SIZE);
|
|
#endif
|
|
bd_t *bip = (bd_t *)__res;
|
|
|
|
if (!ioaddr)
|
|
return -ENOMEM;
|
|
|
|
dev = alloc_ei_netdev();
|
|
if (!dev)
|
|
goto out_unmap;
|
|
|
|
ret = -EBUSY;
|
|
if (!request_region(OAKNET_IO_BASE, OAKNET_IO_SIZE, name))
|
|
goto out_dev;
|
|
|
|
/* Quick register check to see if the device is really there. */
|
|
|
|
ret = -ENODEV;
|
|
if ((reg0 = ei_ibp(ioaddr)) == 0xFF)
|
|
goto out_region;
|
|
|
|
/*
|
|
* That worked. Now a more thorough check, using the multicast
|
|
* address registers, that the device is definitely out there
|
|
* and semi-functional.
|
|
*/
|
|
|
|
ei_obp(E8390_NODMA + E8390_PAGE1 + E8390_STOP, ioaddr + E8390_CMD);
|
|
regd = ei_ibp(ioaddr + 0x0D);
|
|
ei_obp(0xFF, ioaddr + 0x0D);
|
|
ei_obp(E8390_NODMA + E8390_PAGE0, ioaddr + E8390_CMD);
|
|
ei_ibp(ioaddr + EN0_COUNTER0);
|
|
|
|
/* It's no good. Fix things back up and leave. */
|
|
|
|
ret = -ENODEV;
|
|
if (ei_ibp(ioaddr + EN0_COUNTER0) != 0) {
|
|
ei_obp(reg0, ioaddr);
|
|
ei_obp(regd, ioaddr + 0x0D);
|
|
goto out_region;
|
|
}
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
/*
|
|
* This controller is on an embedded board, so the base address
|
|
* and interrupt assignments are pre-assigned and unchageable.
|
|
*/
|
|
|
|
dev->base_addr = ioaddr;
|
|
dev->irq = OAKNET_INT;
|
|
|
|
/*
|
|
* Disable all chip interrupts for now and ACK all pending
|
|
* interrupts.
|
|
*/
|
|
|
|
ei_obp(0x0, ioaddr + EN0_IMR);
|
|
ei_obp(0xFF, ioaddr + EN0_ISR);
|
|
|
|
/* Attempt to get the interrupt line */
|
|
|
|
ret = -EAGAIN;
|
|
if (request_irq(dev->irq, ei_interrupt, 0, name, dev)) {
|
|
printk("%s: unable to request interrupt %d.\n",
|
|
name, dev->irq);
|
|
goto out_region;
|
|
}
|
|
|
|
/* Tell the world about what and where we've found. */
|
|
|
|
printk("%s: %s at", dev->name, name);
|
|
for (i = 0; i < ETHER_ADDR_LEN; ++i) {
|
|
dev->dev_addr[i] = bip->bi_enetaddr[i];
|
|
printk("%c%.2x", (i ? ':' : ' '), dev->dev_addr[i]);
|
|
}
|
|
printk(", found at %#lx, using IRQ %d.\n", dev->base_addr, dev->irq);
|
|
|
|
/* Set up some required driver fields and then we're done. */
|
|
|
|
ei_status.name = name;
|
|
ei_status.word16 = FALSE;
|
|
ei_status.tx_start_page = OAKNET_START_PG;
|
|
ei_status.rx_start_page = OAKNET_START_PG + TX_PAGES;
|
|
ei_status.stop_page = OAKNET_STOP_PG;
|
|
|
|
ei_status.reset_8390 = &oaknet_reset_8390;
|
|
ei_status.block_input = &oaknet_block_input;
|
|
ei_status.block_output = &oaknet_block_output;
|
|
ei_status.get_8390_hdr = &oaknet_get_8390_hdr;
|
|
|
|
dev->open = oaknet_open;
|
|
dev->stop = oaknet_close;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = ei_poll;
|
|
#endif
|
|
|
|
NS8390_init(dev, FALSE);
|
|
ret = register_netdev(dev);
|
|
if (ret)
|
|
goto out_irq;
|
|
|
|
oaknet_devs = dev;
|
|
return 0;
|
|
|
|
out_irq;
|
|
free_irq(dev->irq, dev);
|
|
out_region:
|
|
release_region(OAKNET_IO_BASE, OAKNET_IO_SIZE);
|
|
out_dev:
|
|
free_netdev(dev);
|
|
out_unmap:
|
|
iounmap(ioaddr);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* static int oaknet_open()
|
|
*
|
|
* Description:
|
|
* This routine is a modest wrapper around ei_open, the 8390-generic,
|
|
* driver open routine. This just increments the module usage count
|
|
* and passes along the status from ei_open.
|
|
*
|
|
* Input(s):
|
|
* *dev - Pointer to the device structure for this driver.
|
|
*
|
|
* Output(s):
|
|
* *dev - Pointer to the device structure for this driver, potentially
|
|
* modified by ei_open.
|
|
*
|
|
* Returns:
|
|
* 0 if OK, otherwise < 0 on error.
|
|
*
|
|
*/
|
|
static int
|
|
oaknet_open(struct net_device *dev)
|
|
{
|
|
int status = ei_open(dev);
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* static int oaknet_close()
|
|
*
|
|
* Description:
|
|
* This routine is a modest wrapper around ei_close, the 8390-generic,
|
|
* driver close routine. This just decrements the module usage count
|
|
* and passes along the status from ei_close.
|
|
*
|
|
* Input(s):
|
|
* *dev - Pointer to the device structure for this driver.
|
|
*
|
|
* Output(s):
|
|
* *dev - Pointer to the device structure for this driver, potentially
|
|
* modified by ei_close.
|
|
*
|
|
* Returns:
|
|
* 0 if OK, otherwise < 0 on error.
|
|
*
|
|
*/
|
|
static int
|
|
oaknet_close(struct net_device *dev)
|
|
{
|
|
int status = ei_close(dev);
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* static void oaknet_reset_8390()
|
|
*
|
|
* Description:
|
|
* This routine resets the DP83902 chip.
|
|
*
|
|
* Input(s):
|
|
* *dev - Pointer to the device structure for this driver.
|
|
*
|
|
* Output(s):
|
|
* N/A
|
|
*
|
|
* Returns:
|
|
* N/A
|
|
*
|
|
*/
|
|
static void
|
|
oaknet_reset_8390(struct net_device *dev)
|
|
{
|
|
int base = E8390_BASE;
|
|
|
|
/*
|
|
* We have no provision of reseting the controller as is done
|
|
* in other drivers, such as "ne.c". However, the following
|
|
* seems to work well enough in the TiVo driver.
|
|
*/
|
|
|
|
printk("Resetting %s...\n", dev->name);
|
|
ei_obp(E8390_STOP | E8390_NODMA | E8390_PAGE0, base + E8390_CMD);
|
|
ei_status.txing = 0;
|
|
ei_status.dmaing = 0;
|
|
}
|
|
|
|
/*
|
|
* static void oaknet_get_8390_hdr()
|
|
*
|
|
* Description:
|
|
* This routine grabs the 8390-specific header. It's similar to the
|
|
* block input routine, but we don't need to be concerned with ring wrap
|
|
* as the header will be at the start of a page, so we optimize accordingly.
|
|
*
|
|
* Input(s):
|
|
* *dev - Pointer to the device structure for this driver.
|
|
* *hdr - Pointer to storage for the 8390-specific packet header.
|
|
* ring_page - ?
|
|
*
|
|
* Output(s):
|
|
* *hdr - Pointer to the 8390-specific packet header for the just-
|
|
* received frame.
|
|
*
|
|
* Returns:
|
|
* N/A
|
|
*
|
|
*/
|
|
static void
|
|
oaknet_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
|
|
int ring_page)
|
|
{
|
|
int base = dev->base_addr;
|
|
|
|
/*
|
|
* This should NOT happen. If it does, it is the LAST thing you'll
|
|
* see.
|
|
*/
|
|
|
|
if (ei_status.dmaing) {
|
|
oaknet_dma_error(dev, "oaknet_get_8390_hdr");
|
|
return;
|
|
}
|
|
|
|
ei_status.dmaing |= 0x01;
|
|
outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, base + OAKNET_CMD);
|
|
outb_p(sizeof(struct e8390_pkt_hdr), base + EN0_RCNTLO);
|
|
outb_p(0, base + EN0_RCNTHI);
|
|
outb_p(0, base + EN0_RSARLO); /* On page boundary */
|
|
outb_p(ring_page, base + EN0_RSARHI);
|
|
outb_p(E8390_RREAD + E8390_START, base + OAKNET_CMD);
|
|
|
|
if (ei_status.word16)
|
|
insw(base + OAKNET_DATA, hdr,
|
|
sizeof(struct e8390_pkt_hdr) >> 1);
|
|
else
|
|
insb(base + OAKNET_DATA, hdr,
|
|
sizeof(struct e8390_pkt_hdr));
|
|
|
|
/* Byte-swap the packet byte count */
|
|
|
|
hdr->count = le16_to_cpu(hdr->count);
|
|
|
|
outb_p(ENISR_RDC, base + EN0_ISR); /* ACK Remote DMA interrupt */
|
|
ei_status.dmaing &= ~0x01;
|
|
}
|
|
|
|
/*
|
|
* XXX - Document me.
|
|
*/
|
|
static void
|
|
oaknet_block_input(struct net_device *dev, int count, struct sk_buff *skb,
|
|
int ring_offset)
|
|
{
|
|
int base = OAKNET_BASE;
|
|
char *buf = skb->data;
|
|
|
|
/*
|
|
* This should NOT happen. If it does, it is the LAST thing you'll
|
|
* see.
|
|
*/
|
|
|
|
if (ei_status.dmaing) {
|
|
oaknet_dma_error(dev, "oaknet_block_input");
|
|
return;
|
|
}
|
|
|
|
#ifdef OAKNET_DISINT
|
|
save_flags(flags);
|
|
cli();
|
|
#endif
|
|
|
|
ei_status.dmaing |= 0x01;
|
|
ei_obp(E8390_NODMA + E8390_PAGE0 + E8390_START, base + E8390_CMD);
|
|
ei_obp(count & 0xff, base + EN0_RCNTLO);
|
|
ei_obp(count >> 8, base + EN0_RCNTHI);
|
|
ei_obp(ring_offset & 0xff, base + EN0_RSARLO);
|
|
ei_obp(ring_offset >> 8, base + EN0_RSARHI);
|
|
ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD);
|
|
if (ei_status.word16) {
|
|
ei_isw(base + E8390_DATA, buf, count >> 1);
|
|
if (count & 0x01) {
|
|
buf[count - 1] = ei_ib(base + E8390_DATA);
|
|
#ifdef OAKNET_HEADCHECK
|
|
bytes++;
|
|
#endif
|
|
}
|
|
} else {
|
|
ei_isb(base + E8390_DATA, buf, count);
|
|
}
|
|
#ifdef OAKNET_HEADCHECK
|
|
/*
|
|
* This was for the ALPHA version only, but enough people have
|
|
* been encountering problems so it is still here. If you see
|
|
* this message you either 1) have a slightly incompatible clone
|
|
* or 2) have noise/speed problems with your bus.
|
|
*/
|
|
|
|
/* DMA termination address check... */
|
|
{
|
|
int addr, tries = 20;
|
|
do {
|
|
/* DON'T check for 'ei_ibp(EN0_ISR) & ENISR_RDC' here
|
|
-- it's broken for Rx on some cards! */
|
|
int high = ei_ibp(base + EN0_RSARHI);
|
|
int low = ei_ibp(base + EN0_RSARLO);
|
|
addr = (high << 8) + low;
|
|
if (((ring_offset + bytes) & 0xff) == low)
|
|
break;
|
|
} while (--tries > 0);
|
|
if (tries <= 0)
|
|
printk("%s: RX transfer address mismatch,"
|
|
"%#4.4x (expected) vs. %#4.4x (actual).\n",
|
|
dev->name, ring_offset + bytes, addr);
|
|
}
|
|
#endif
|
|
ei_obp(ENISR_RDC, base + EN0_ISR); /* ACK Remote DMA interrupt */
|
|
ei_status.dmaing &= ~0x01;
|
|
|
|
#ifdef OAKNET_DISINT
|
|
restore_flags(flags);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* static void oaknet_block_output()
|
|
*
|
|
* Description:
|
|
* This routine...
|
|
*
|
|
* Input(s):
|
|
* *dev - Pointer to the device structure for this driver.
|
|
* count - Number of bytes to be transferred.
|
|
* *buf -
|
|
* start_page -
|
|
*
|
|
* Output(s):
|
|
* N/A
|
|
*
|
|
* Returns:
|
|
* N/A
|
|
*
|
|
*/
|
|
static void
|
|
oaknet_block_output(struct net_device *dev, int count,
|
|
const unsigned char *buf, int start_page)
|
|
{
|
|
int base = E8390_BASE;
|
|
#if 0
|
|
int bug;
|
|
#endif
|
|
unsigned long start;
|
|
#ifdef OAKNET_DISINT
|
|
unsigned long flags;
|
|
#endif
|
|
#ifdef OAKNET_HEADCHECK
|
|
int retries = 0;
|
|
#endif
|
|
|
|
/* Round the count up for word writes. */
|
|
|
|
if (ei_status.word16 && (count & 0x1))
|
|
count++;
|
|
|
|
/*
|
|
* This should NOT happen. If it does, it is the LAST thing you'll
|
|
* see.
|
|
*/
|
|
|
|
if (ei_status.dmaing) {
|
|
oaknet_dma_error(dev, "oaknet_block_output");
|
|
return;
|
|
}
|
|
|
|
#ifdef OAKNET_DISINT
|
|
save_flags(flags);
|
|
cli();
|
|
#endif
|
|
|
|
ei_status.dmaing |= 0x01;
|
|
|
|
/* Make sure we are in page 0. */
|
|
|
|
ei_obp(E8390_PAGE0 + E8390_START + E8390_NODMA, base + E8390_CMD);
|
|
|
|
#ifdef OAKNET_HEADCHECK
|
|
retry:
|
|
#endif
|
|
|
|
#if 0
|
|
/*
|
|
* The 83902 documentation states that the processor needs to
|
|
* do a "dummy read" before doing the remote write to work
|
|
* around a chip bug they don't feel like fixing.
|
|
*/
|
|
|
|
bug = 0;
|
|
while (1) {
|
|
unsigned int rdhi;
|
|
unsigned int rdlo;
|
|
|
|
/* Now the normal output. */
|
|
ei_obp(ENISR_RDC, base + EN0_ISR);
|
|
ei_obp(count & 0xff, base + EN0_RCNTLO);
|
|
ei_obp(count >> 8, base + EN0_RCNTHI);
|
|
ei_obp(0x00, base + EN0_RSARLO);
|
|
ei_obp(start_page, base + EN0_RSARHI);
|
|
|
|
if (bug++)
|
|
break;
|
|
|
|
/* Perform the dummy read */
|
|
rdhi = ei_ibp(base + EN0_CRDAHI);
|
|
rdlo = ei_ibp(base + EN0_CRDALO);
|
|
ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD);
|
|
|
|
while (1) {
|
|
unsigned int nrdhi;
|
|
unsigned int nrdlo;
|
|
nrdhi = ei_ibp(base + EN0_CRDAHI);
|
|
nrdlo = ei_ibp(base + EN0_CRDALO);
|
|
if ((rdhi != nrdhi) || (rdlo != nrdlo))
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
#ifdef OAKNET_RWFIX
|
|
/*
|
|
* Handle the read-before-write bug the same way as the
|
|
* Crynwr packet driver -- the Nat'l Semi. method doesn't work.
|
|
* Actually this doesn't always work either, but if you have
|
|
* problems with your 83902 this is better than nothing!
|
|
*/
|
|
|
|
ei_obp(0x42, base + EN0_RCNTLO);
|
|
ei_obp(0x00, base + EN0_RCNTHI);
|
|
ei_obp(0x42, base + EN0_RSARLO);
|
|
ei_obp(0x00, base + EN0_RSARHI);
|
|
ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD);
|
|
/* Make certain that the dummy read has occurred. */
|
|
udelay(6);
|
|
#endif
|
|
|
|
ei_obp(ENISR_RDC, base + EN0_ISR);
|
|
|
|
/* Now the normal output. */
|
|
ei_obp(count & 0xff, base + EN0_RCNTLO);
|
|
ei_obp(count >> 8, base + EN0_RCNTHI);
|
|
ei_obp(0x00, base + EN0_RSARLO);
|
|
ei_obp(start_page, base + EN0_RSARHI);
|
|
#endif /* 0/1 */
|
|
|
|
ei_obp(E8390_RWRITE + E8390_START, base + E8390_CMD);
|
|
if (ei_status.word16) {
|
|
ei_osw(E8390_BASE + E8390_DATA, buf, count >> 1);
|
|
} else {
|
|
ei_osb(E8390_BASE + E8390_DATA, buf, count);
|
|
}
|
|
|
|
#ifdef OAKNET_DISINT
|
|
restore_flags(flags);
|
|
#endif
|
|
|
|
start = jiffies;
|
|
|
|
#ifdef OAKNET_HEADCHECK
|
|
/*
|
|
* This was for the ALPHA version only, but enough people have
|
|
* been encountering problems so it is still here.
|
|
*/
|
|
|
|
{
|
|
/* DMA termination address check... */
|
|
int addr, tries = 20;
|
|
do {
|
|
int high = ei_ibp(base + EN0_RSARHI);
|
|
int low = ei_ibp(base + EN0_RSARLO);
|
|
addr = (high << 8) + low;
|
|
if ((start_page << 8) + count == addr)
|
|
break;
|
|
} while (--tries > 0);
|
|
|
|
if (tries <= 0) {
|
|
printk("%s: Tx packet transfer address mismatch,"
|
|
"%#4.4x (expected) vs. %#4.4x (actual).\n",
|
|
dev->name, (start_page << 8) + count, addr);
|
|
if (retries++ == 0)
|
|
goto retry;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
while ((ei_ibp(base + EN0_ISR) & ENISR_RDC) == 0) {
|
|
if (jiffies - start > OAKNET_WAIT) {
|
|
printk("%s: timeout waiting for Tx RDC.\n", dev->name);
|
|
oaknet_reset_8390(dev);
|
|
NS8390_init(dev, TRUE);
|
|
break;
|
|
}
|
|
}
|
|
|
|
ei_obp(ENISR_RDC, base + EN0_ISR); /* Ack intr. */
|
|
ei_status.dmaing &= ~0x01;
|
|
}
|
|
|
|
/*
|
|
* static void oaknet_dma_error()
|
|
*
|
|
* Description:
|
|
* This routine prints out a last-ditch informative message to the console
|
|
* indicating that a DMA error occurred. If you see this, it's the last
|
|
* thing you'll see.
|
|
*
|
|
* Input(s):
|
|
* *dev - Pointer to the device structure for this driver.
|
|
* *name - Informative text (e.g. function name) indicating where the
|
|
* DMA error occurred.
|
|
*
|
|
* Output(s):
|
|
* N/A
|
|
*
|
|
* Returns:
|
|
* N/A
|
|
*
|
|
*/
|
|
static void
|
|
oaknet_dma_error(struct net_device *dev, const char *name)
|
|
{
|
|
printk(KERN_EMERG "%s: DMAing conflict in %s."
|
|
"[DMAstat:%d][irqlock:%d][intr:%ld]\n",
|
|
dev->name, name, ei_status.dmaing, ei_status.irqlock,
|
|
dev->interrupt);
|
|
}
|
|
|
|
/*
|
|
* Oak Ethernet module unload interface.
|
|
*/
|
|
static void __exit oaknet_cleanup_module (void)
|
|
{
|
|
/* Convert to loop once driver supports multiple devices. */
|
|
unregister_netdev(oaknet_dev);
|
|
free_irq(oaknet_devs->irq, oaknet_devs);
|
|
release_region(oaknet_devs->base_addr, OAKNET_IO_SIZE);
|
|
iounmap(ioaddr);
|
|
free_netdev(oaknet_devs);
|
|
}
|
|
|
|
module_init(oaknet_init);
|
|
module_exit(oaknet_cleanup_module);
|
|
MODULE_LICENSE("GPL");
|