Jonathan Cameron b6795fa9fd [ARM] pxa: initial support for the Imote2 platform ... Changes made as suggested by Eric Miao (including fix to map_io silly mistake!). Originally designed by Intel, now sold by Crossbow (www.xbow.com). Very little actually on board. The patch includes sensors and similar as found on commonly occurring daughter boards. Some of the drivers are not in mainline as yet as they are either part of the IIO subsystem or need a lot of work before submission. What is the position wrt to putting them in i2c board configs etc? Support for these boards has been maintained outside the kernel for a long time, but now that there is a good da9030 pmic driver available the last major hurdle no longer exists. All comments welcomed. The Imote2's big brother (stargate2) will follow once any problems with this one have been cleaned up and a few bits and bobs have been added to the da903x driver. Hopefully the cc2420 driver will get cleaned up and submitted in the not too distant future as well. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>		2008-12-17 22:51:39 +08:00
..
audio.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
bitfield.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
camera.h	V4L/DVB (8687): soc-camera: Move .power and .reset from soc_camera host to sensor driver	2008-10-12 09:36:50 -02:00
colibri.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
corgi.h	Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"	2008-10-21 09:42:29 +08:00
debug-macro.S	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
dma.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
entry-macro.S	[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15	2008-09-01 17:13:26 +01:00
eseries-gpio.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
eseries-irq.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
gpio.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
gumstix.h	[ARM] pxa/gumstix: fix incorrect init done by am200	2008-12-17 22:51:38 +08:00
h5000.h	[ARM] pxa: add basic support for HP iPAQ h5000	2008-12-02 14:43:50 +08:00
hardware.h	[ARM] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx()	2008-12-02 14:42:40 +08:00
i2c.h	[ARM] 5278/1: i2c-pxa fast mode support	2008-10-03 15:57:06 +01:00
idp.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
io.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
irda.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
irqs.h	[ARM] pxa: fix redefinition of NR_IRQS	2008-10-17 13:19:08 +01:00
littleton.h	[ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driver	2008-09-23 22:04:38 +01:00
lpd270.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
lubbock.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
magician.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
mainstone.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
memory.h	[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255	2008-10-07 12:05:05 +01:00
mfp-pxa2xx.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
mfp-pxa3xx.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
mfp-pxa25x.h	[ARM] pxa: add support for additional GPIOs on PXA26x	2008-12-02 14:42:37 +08:00
mfp-pxa27x.h	[ARM] pxa: add missing GPIOs definitions	2008-12-02 14:42:41 +08:00
mfp-pxa300.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
mfp-pxa320.h	[ARM] pxa: fix incorrect definitions of SSP3 on pxa320	2008-08-26 17:02:00 +01:00
mfp-pxa930.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
mfp.h	[ARM] pxa: better MFP low power state support for pxa25x/pxa27x	2008-09-26 23:43:20 +01:00
mioa701.h	[ARM] pxa/MioA701: discovered new gpio definitions.	2008-12-02 14:43:48 +08:00
mmc.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
mtd-xip.h	[ARM] 5191/1: ARM: remove CVS keywords	2008-08-16 20:01:18 +01:00
ohci.h	[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers	2008-10-07 19:12:57 +01:00
palmtx.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
palmz72.h	[ARM] 5239/1: Palm Zire 72 power management support	2008-10-09 15:12:07 +01:00
pcm027.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
pcm990_baseboard.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
pm.h	[ARM] pxa: Allow platforms to override PSPR setting	2008-09-09 16:32:52 +01:00
poodle.h	[ARM] pxa/poodle: prepare scoop for the generic GPIO API	2008-09-23 22:04:38 +01:00
pxa2xx_spi.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
pxa2xx-gpio.h	[ARM] pxa: removed unused declarations of pxa_gpio_* in hardware.h	2008-12-02 14:42:37 +08:00
pxa2xx-regs.h	[ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support	2008-12-02 14:43:47 +08:00
pxa3xx_nand.h	[MTD] [NAND] pxa3xx_nand: moved some helper variables out from platform data	2008-09-01 21:38:34 +01:00
pxa3xx-regs.h	[ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h	2008-10-07 19:12:59 +01:00
pxa25x-udc.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
pxa27x_keypad.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
pxa27x-udc.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
pxa-regs.h	[ARM] pxa: include <mach/hardware.h> in pxa-regs.h	2008-12-02 14:42:39 +08:00
pxafb.h	[ARM] pxafb: allow better platform configurable smart panel timing	2008-12-17 22:50:40 +08:00
regs-ac97.h	[ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h	2008-12-02 14:42:39 +08:00
regs-lcd.h	[ARM] pxafb: allow insertion of delay to the smart panel command sequence	2008-12-17 22:50:52 +08:00
regs-ssp.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
regs-uart.h	[ARM] pxa: move UART register definitions into dedicated regs-uart.h	2008-12-02 14:42:38 +08:00
reset.h	[ARM] 5300/1: fixup spitz reset during boot	2008-10-11 09:52:38 +01:00
sharpsl.h	[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl	2008-10-29 11:45:37 +08:00
spitz.h	[ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h	2008-10-21 22:45:57 +08:00
ssp.h	[ARM] 5224/2: PXA SSP: Introduce register accessors	2008-09-09 16:32:52 +01:00
system.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
timex.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
tosa_bt.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
tosa.h	backlight: add support for Sharp SL-6000 LCD and backlight drivers	2008-10-21 00:19:49 +01:00
trizeps4.h	[ARM] 5204/1: Trizeps4 SOM update	2008-10-01 22:33:11 +01:00
udc.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
uncompress.h	[ARM] pxa: initial support for the Imote2 platform	2008-12-17 22:51:39 +08:00
viper.h	Basic support for the Arcom/Eurotech Viper SBC.	2008-09-09 17:41:46 +02:00
vmalloc.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
zylonite.h	misc: replace remaining __FUNCTION__ with __func__	2008-10-20 16:17:42 -07:00