mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 16:55:17 +07:00
d788905f68
Currently, in case of bus error, driver will generate error message and put in the tail of the message queue. To avoid confusions, this change should place the bus related messages in proper order. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
1488 lines
42 KiB
C
1488 lines
42 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// flexcan.c - FLEXCAN CAN controller driver
|
|
//
|
|
// Copyright (c) 2005-2006 Varma Electronics Oy
|
|
// Copyright (c) 2009 Sascha Hauer, Pengutronix
|
|
// Copyright (c) 2010-2017 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
|
|
// Copyright (c) 2014 David Jander, Protonic Holland
|
|
//
|
|
// Based on code originally by Andrey Volkov <avolkov@varma-el.com>
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
#include <linux/can/led.h>
|
|
#include <linux/can/rx-offload.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define DRV_NAME "flexcan"
|
|
|
|
/* 8 for RX fifo and 2 error handling */
|
|
#define FLEXCAN_NAPI_WEIGHT (8 + 2)
|
|
|
|
/* FLEXCAN module configuration register (CANMCR) bits */
|
|
#define FLEXCAN_MCR_MDIS BIT(31)
|
|
#define FLEXCAN_MCR_FRZ BIT(30)
|
|
#define FLEXCAN_MCR_FEN BIT(29)
|
|
#define FLEXCAN_MCR_HALT BIT(28)
|
|
#define FLEXCAN_MCR_NOT_RDY BIT(27)
|
|
#define FLEXCAN_MCR_WAK_MSK BIT(26)
|
|
#define FLEXCAN_MCR_SOFTRST BIT(25)
|
|
#define FLEXCAN_MCR_FRZ_ACK BIT(24)
|
|
#define FLEXCAN_MCR_SUPV BIT(23)
|
|
#define FLEXCAN_MCR_SLF_WAK BIT(22)
|
|
#define FLEXCAN_MCR_WRN_EN BIT(21)
|
|
#define FLEXCAN_MCR_LPM_ACK BIT(20)
|
|
#define FLEXCAN_MCR_WAK_SRC BIT(19)
|
|
#define FLEXCAN_MCR_DOZE BIT(18)
|
|
#define FLEXCAN_MCR_SRX_DIS BIT(17)
|
|
#define FLEXCAN_MCR_IRMQ BIT(16)
|
|
#define FLEXCAN_MCR_LPRIO_EN BIT(13)
|
|
#define FLEXCAN_MCR_AEN BIT(12)
|
|
/* MCR_MAXMB: maximum used MBs is MAXMB + 1 */
|
|
#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x7f)
|
|
#define FLEXCAN_MCR_IDAM_A (0x0 << 8)
|
|
#define FLEXCAN_MCR_IDAM_B (0x1 << 8)
|
|
#define FLEXCAN_MCR_IDAM_C (0x2 << 8)
|
|
#define FLEXCAN_MCR_IDAM_D (0x3 << 8)
|
|
|
|
/* FLEXCAN control register (CANCTRL) bits */
|
|
#define FLEXCAN_CTRL_PRESDIV(x) (((x) & 0xff) << 24)
|
|
#define FLEXCAN_CTRL_RJW(x) (((x) & 0x03) << 22)
|
|
#define FLEXCAN_CTRL_PSEG1(x) (((x) & 0x07) << 19)
|
|
#define FLEXCAN_CTRL_PSEG2(x) (((x) & 0x07) << 16)
|
|
#define FLEXCAN_CTRL_BOFF_MSK BIT(15)
|
|
#define FLEXCAN_CTRL_ERR_MSK BIT(14)
|
|
#define FLEXCAN_CTRL_CLK_SRC BIT(13)
|
|
#define FLEXCAN_CTRL_LPB BIT(12)
|
|
#define FLEXCAN_CTRL_TWRN_MSK BIT(11)
|
|
#define FLEXCAN_CTRL_RWRN_MSK BIT(10)
|
|
#define FLEXCAN_CTRL_SMP BIT(7)
|
|
#define FLEXCAN_CTRL_BOFF_REC BIT(6)
|
|
#define FLEXCAN_CTRL_TSYN BIT(5)
|
|
#define FLEXCAN_CTRL_LBUF BIT(4)
|
|
#define FLEXCAN_CTRL_LOM BIT(3)
|
|
#define FLEXCAN_CTRL_PROPSEG(x) ((x) & 0x07)
|
|
#define FLEXCAN_CTRL_ERR_BUS (FLEXCAN_CTRL_ERR_MSK)
|
|
#define FLEXCAN_CTRL_ERR_STATE \
|
|
(FLEXCAN_CTRL_TWRN_MSK | FLEXCAN_CTRL_RWRN_MSK | \
|
|
FLEXCAN_CTRL_BOFF_MSK)
|
|
#define FLEXCAN_CTRL_ERR_ALL \
|
|
(FLEXCAN_CTRL_ERR_BUS | FLEXCAN_CTRL_ERR_STATE)
|
|
|
|
/* FLEXCAN control register 2 (CTRL2) bits */
|
|
#define FLEXCAN_CTRL2_ECRWRE BIT(29)
|
|
#define FLEXCAN_CTRL2_WRMFRZ BIT(28)
|
|
#define FLEXCAN_CTRL2_RFFN(x) (((x) & 0x0f) << 24)
|
|
#define FLEXCAN_CTRL2_TASD(x) (((x) & 0x1f) << 19)
|
|
#define FLEXCAN_CTRL2_MRP BIT(18)
|
|
#define FLEXCAN_CTRL2_RRS BIT(17)
|
|
#define FLEXCAN_CTRL2_EACEN BIT(16)
|
|
|
|
/* FLEXCAN memory error control register (MECR) bits */
|
|
#define FLEXCAN_MECR_ECRWRDIS BIT(31)
|
|
#define FLEXCAN_MECR_HANCEI_MSK BIT(19)
|
|
#define FLEXCAN_MECR_FANCEI_MSK BIT(18)
|
|
#define FLEXCAN_MECR_CEI_MSK BIT(16)
|
|
#define FLEXCAN_MECR_HAERRIE BIT(15)
|
|
#define FLEXCAN_MECR_FAERRIE BIT(14)
|
|
#define FLEXCAN_MECR_EXTERRIE BIT(13)
|
|
#define FLEXCAN_MECR_RERRDIS BIT(9)
|
|
#define FLEXCAN_MECR_ECCDIS BIT(8)
|
|
#define FLEXCAN_MECR_NCEFAFRZ BIT(7)
|
|
|
|
/* FLEXCAN error and status register (ESR) bits */
|
|
#define FLEXCAN_ESR_TWRN_INT BIT(17)
|
|
#define FLEXCAN_ESR_RWRN_INT BIT(16)
|
|
#define FLEXCAN_ESR_BIT1_ERR BIT(15)
|
|
#define FLEXCAN_ESR_BIT0_ERR BIT(14)
|
|
#define FLEXCAN_ESR_ACK_ERR BIT(13)
|
|
#define FLEXCAN_ESR_CRC_ERR BIT(12)
|
|
#define FLEXCAN_ESR_FRM_ERR BIT(11)
|
|
#define FLEXCAN_ESR_STF_ERR BIT(10)
|
|
#define FLEXCAN_ESR_TX_WRN BIT(9)
|
|
#define FLEXCAN_ESR_RX_WRN BIT(8)
|
|
#define FLEXCAN_ESR_IDLE BIT(7)
|
|
#define FLEXCAN_ESR_TXRX BIT(6)
|
|
#define FLEXCAN_EST_FLT_CONF_SHIFT (4)
|
|
#define FLEXCAN_ESR_FLT_CONF_MASK (0x3 << FLEXCAN_EST_FLT_CONF_SHIFT)
|
|
#define FLEXCAN_ESR_FLT_CONF_ACTIVE (0x0 << FLEXCAN_EST_FLT_CONF_SHIFT)
|
|
#define FLEXCAN_ESR_FLT_CONF_PASSIVE (0x1 << FLEXCAN_EST_FLT_CONF_SHIFT)
|
|
#define FLEXCAN_ESR_BOFF_INT BIT(2)
|
|
#define FLEXCAN_ESR_ERR_INT BIT(1)
|
|
#define FLEXCAN_ESR_WAK_INT BIT(0)
|
|
#define FLEXCAN_ESR_ERR_BUS \
|
|
(FLEXCAN_ESR_BIT1_ERR | FLEXCAN_ESR_BIT0_ERR | \
|
|
FLEXCAN_ESR_ACK_ERR | FLEXCAN_ESR_CRC_ERR | \
|
|
FLEXCAN_ESR_FRM_ERR | FLEXCAN_ESR_STF_ERR)
|
|
#define FLEXCAN_ESR_ERR_STATE \
|
|
(FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | FLEXCAN_ESR_BOFF_INT)
|
|
#define FLEXCAN_ESR_ERR_ALL \
|
|
(FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)
|
|
#define FLEXCAN_ESR_ALL_INT \
|
|
(FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | \
|
|
FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
|
|
|
|
/* FLEXCAN interrupt flag register (IFLAG) bits */
|
|
/* Errata ERR005829 step7: Reserve first valid MB */
|
|
#define FLEXCAN_TX_MB_RESERVED_OFF_FIFO 8
|
|
#define FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP 0
|
|
#define FLEXCAN_TX_MB 63
|
|
#define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST (FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP + 1)
|
|
#define FLEXCAN_RX_MB_OFF_TIMESTAMP_LAST (FLEXCAN_TX_MB - 1)
|
|
#define FLEXCAN_IFLAG_MB(x) BIT(x & 0x1f)
|
|
#define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7)
|
|
#define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6)
|
|
#define FLEXCAN_IFLAG_RX_FIFO_AVAILABLE BIT(5)
|
|
|
|
/* FLEXCAN message buffers */
|
|
#define FLEXCAN_MB_CODE_MASK (0xf << 24)
|
|
#define FLEXCAN_MB_CODE_RX_BUSY_BIT (0x1 << 24)
|
|
#define FLEXCAN_MB_CODE_RX_INACTIVE (0x0 << 24)
|
|
#define FLEXCAN_MB_CODE_RX_EMPTY (0x4 << 24)
|
|
#define FLEXCAN_MB_CODE_RX_FULL (0x2 << 24)
|
|
#define FLEXCAN_MB_CODE_RX_OVERRUN (0x6 << 24)
|
|
#define FLEXCAN_MB_CODE_RX_RANSWER (0xa << 24)
|
|
|
|
#define FLEXCAN_MB_CODE_TX_INACTIVE (0x8 << 24)
|
|
#define FLEXCAN_MB_CODE_TX_ABORT (0x9 << 24)
|
|
#define FLEXCAN_MB_CODE_TX_DATA (0xc << 24)
|
|
#define FLEXCAN_MB_CODE_TX_TANSWER (0xe << 24)
|
|
|
|
#define FLEXCAN_MB_CNT_SRR BIT(22)
|
|
#define FLEXCAN_MB_CNT_IDE BIT(21)
|
|
#define FLEXCAN_MB_CNT_RTR BIT(20)
|
|
#define FLEXCAN_MB_CNT_LENGTH(x) (((x) & 0xf) << 16)
|
|
#define FLEXCAN_MB_CNT_TIMESTAMP(x) ((x) & 0xffff)
|
|
|
|
#define FLEXCAN_TIMEOUT_US (50)
|
|
|
|
/* FLEXCAN hardware feature flags
|
|
*
|
|
* Below is some version info we got:
|
|
* SOC Version IP-Version Glitch- [TR]WRN_INT IRQ Err Memory err RTR re-
|
|
* Filter? connected? Passive detection ception in MB
|
|
* MX25 FlexCAN2 03.00.00.00 no no no no no
|
|
* MX28 FlexCAN2 03.00.04.00 yes yes no no no
|
|
* MX35 FlexCAN2 03.00.00.00 no no no no no
|
|
* MX53 FlexCAN2 03.00.00.00 yes no no no no
|
|
* MX6s FlexCAN3 10.00.12.00 yes yes no no yes
|
|
* VF610 FlexCAN3 ? no yes no yes yes?
|
|
* LS1021A FlexCAN2 03.00.04.00 no yes no no yes
|
|
*
|
|
* Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
|
|
*/
|
|
#define FLEXCAN_QUIRK_BROKEN_WERR_STATE BIT(1) /* [TR]WRN_INT not connected */
|
|
#define FLEXCAN_QUIRK_DISABLE_RXFG BIT(2) /* Disable RX FIFO Global mask */
|
|
#define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3) /* Enable EACEN and RRS bit in ctrl2 */
|
|
#define FLEXCAN_QUIRK_DISABLE_MECR BIT(4) /* Disable Memory error detection */
|
|
#define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP BIT(5) /* Use timestamp based offloading */
|
|
#define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6) /* No interrupt for error passive */
|
|
#define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN BIT(7) /* default to BE register access */
|
|
|
|
/* Structure of the message buffer */
|
|
struct flexcan_mb {
|
|
u32 can_ctrl;
|
|
u32 can_id;
|
|
u32 data[2];
|
|
};
|
|
|
|
/* Structure of the hardware registers */
|
|
struct flexcan_regs {
|
|
u32 mcr; /* 0x00 */
|
|
u32 ctrl; /* 0x04 */
|
|
u32 timer; /* 0x08 */
|
|
u32 _reserved1; /* 0x0c */
|
|
u32 rxgmask; /* 0x10 */
|
|
u32 rx14mask; /* 0x14 */
|
|
u32 rx15mask; /* 0x18 */
|
|
u32 ecr; /* 0x1c */
|
|
u32 esr; /* 0x20 */
|
|
u32 imask2; /* 0x24 */
|
|
u32 imask1; /* 0x28 */
|
|
u32 iflag2; /* 0x2c */
|
|
u32 iflag1; /* 0x30 */
|
|
union { /* 0x34 */
|
|
u32 gfwr_mx28; /* MX28, MX53 */
|
|
u32 ctrl2; /* MX6, VF610 */
|
|
};
|
|
u32 esr2; /* 0x38 */
|
|
u32 imeur; /* 0x3c */
|
|
u32 lrfr; /* 0x40 */
|
|
u32 crcr; /* 0x44 */
|
|
u32 rxfgmask; /* 0x48 */
|
|
u32 rxfir; /* 0x4c */
|
|
u32 _reserved3[12]; /* 0x50 */
|
|
struct flexcan_mb mb[64]; /* 0x80 */
|
|
/* FIFO-mode:
|
|
* MB
|
|
* 0x080...0x08f 0 RX message buffer
|
|
* 0x090...0x0df 1-5 reserverd
|
|
* 0x0e0...0x0ff 6-7 8 entry ID table
|
|
* (mx25, mx28, mx35, mx53)
|
|
* 0x0e0...0x2df 6-7..37 8..128 entry ID table
|
|
* size conf'ed via ctrl2::RFFN
|
|
* (mx6, vf610)
|
|
*/
|
|
u32 _reserved4[256]; /* 0x480 */
|
|
u32 rximr[64]; /* 0x880 */
|
|
u32 _reserved5[24]; /* 0x980 */
|
|
u32 gfwr_mx6; /* 0x9e0 - MX6 */
|
|
u32 _reserved6[63]; /* 0x9e4 */
|
|
u32 mecr; /* 0xae0 */
|
|
u32 erriar; /* 0xae4 */
|
|
u32 erridpr; /* 0xae8 */
|
|
u32 errippr; /* 0xaec */
|
|
u32 rerrar; /* 0xaf0 */
|
|
u32 rerrdr; /* 0xaf4 */
|
|
u32 rerrsynr; /* 0xaf8 */
|
|
u32 errsr; /* 0xafc */
|
|
};
|
|
|
|
struct flexcan_devtype_data {
|
|
u32 quirks; /* quirks needed for different IP cores */
|
|
};
|
|
|
|
struct flexcan_priv {
|
|
struct can_priv can;
|
|
struct can_rx_offload offload;
|
|
|
|
struct flexcan_regs __iomem *regs;
|
|
struct flexcan_mb __iomem *tx_mb_reserved;
|
|
u32 reg_ctrl_default;
|
|
u32 reg_imask1_default;
|
|
u32 reg_imask2_default;
|
|
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_per;
|
|
const struct flexcan_devtype_data *devtype_data;
|
|
struct regulator *reg_xceiver;
|
|
|
|
/* Read and Write APIs */
|
|
u32 (*read)(void __iomem *addr);
|
|
void (*write)(u32 val, void __iomem *addr);
|
|
};
|
|
|
|
static const struct flexcan_devtype_data fsl_p1010_devtype_data = {
|
|
.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
|
|
FLEXCAN_QUIRK_BROKEN_PERR_STATE |
|
|
FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN,
|
|
};
|
|
|
|
static const struct flexcan_devtype_data fsl_imx25_devtype_data = {
|
|
.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
|
|
FLEXCAN_QUIRK_BROKEN_PERR_STATE,
|
|
};
|
|
|
|
static const struct flexcan_devtype_data fsl_imx28_devtype_data = {
|
|
.quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE,
|
|
};
|
|
|
|
static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
|
|
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
|
|
FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE,
|
|
};
|
|
|
|
static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
|
|
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
|
|
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
|
|
FLEXCAN_QUIRK_BROKEN_PERR_STATE,
|
|
};
|
|
|
|
static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
|
|
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
|
|
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
|
|
FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
|
|
};
|
|
|
|
static const struct can_bittiming_const flexcan_bittiming_const = {
|
|
.name = DRV_NAME,
|
|
.tseg1_min = 4,
|
|
.tseg1_max = 16,
|
|
.tseg2_min = 2,
|
|
.tseg2_max = 8,
|
|
.sjw_max = 4,
|
|
.brp_min = 1,
|
|
.brp_max = 256,
|
|
.brp_inc = 1,
|
|
};
|
|
|
|
/* FlexCAN module is essentially modelled as a little-endian IP in most
|
|
* SoCs, i.e the registers as well as the message buffer areas are
|
|
* implemented in a little-endian fashion.
|
|
*
|
|
* However there are some SoCs (e.g. LS1021A) which implement the FlexCAN
|
|
* module in a big-endian fashion (i.e the registers as well as the
|
|
* message buffer areas are implemented in a big-endian way).
|
|
*
|
|
* In addition, the FlexCAN module can be found on SoCs having ARM or
|
|
* PPC cores. So, we need to abstract off the register read/write
|
|
* functions, ensuring that these cater to all the combinations of module
|
|
* endianness and underlying CPU endianness.
|
|
*/
|
|
static inline u32 flexcan_read_be(void __iomem *addr)
|
|
{
|
|
return ioread32be(addr);
|
|
}
|
|
|
|
static inline void flexcan_write_be(u32 val, void __iomem *addr)
|
|
{
|
|
iowrite32be(val, addr);
|
|
}
|
|
|
|
static inline u32 flexcan_read_le(void __iomem *addr)
|
|
{
|
|
return ioread32(addr);
|
|
}
|
|
|
|
static inline void flexcan_write_le(u32 val, void __iomem *addr)
|
|
{
|
|
iowrite32(val, addr);
|
|
}
|
|
|
|
static inline void flexcan_error_irq_enable(const struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 reg_ctrl = (priv->reg_ctrl_default | FLEXCAN_CTRL_ERR_MSK);
|
|
|
|
priv->write(reg_ctrl, ®s->ctrl);
|
|
}
|
|
|
|
static inline void flexcan_error_irq_disable(const struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 reg_ctrl = (priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_MSK);
|
|
|
|
priv->write(reg_ctrl, ®s->ctrl);
|
|
}
|
|
|
|
static inline int flexcan_transceiver_enable(const struct flexcan_priv *priv)
|
|
{
|
|
if (!priv->reg_xceiver)
|
|
return 0;
|
|
|
|
return regulator_enable(priv->reg_xceiver);
|
|
}
|
|
|
|
static inline int flexcan_transceiver_disable(const struct flexcan_priv *priv)
|
|
{
|
|
if (!priv->reg_xceiver)
|
|
return 0;
|
|
|
|
return regulator_disable(priv->reg_xceiver);
|
|
}
|
|
|
|
static int flexcan_chip_enable(struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
|
|
u32 reg;
|
|
|
|
reg = priv->read(®s->mcr);
|
|
reg &= ~FLEXCAN_MCR_MDIS;
|
|
priv->write(reg, ®s->mcr);
|
|
|
|
while (timeout-- && (priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
udelay(10);
|
|
|
|
if (priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_chip_disable(struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
|
|
u32 reg;
|
|
|
|
reg = priv->read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_MDIS;
|
|
priv->write(reg, ®s->mcr);
|
|
|
|
while (timeout-- && !(priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
udelay(10);
|
|
|
|
if (!(priv->read(®s->mcr) & FLEXCAN_MCR_LPM_ACK))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_chip_freeze(struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
unsigned int timeout = 1000 * 1000 * 10 / priv->can.bittiming.bitrate;
|
|
u32 reg;
|
|
|
|
reg = priv->read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_HALT;
|
|
priv->write(reg, ®s->mcr);
|
|
|
|
while (timeout-- && !(priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
udelay(100);
|
|
|
|
if (!(priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_chip_unfreeze(struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
|
|
u32 reg;
|
|
|
|
reg = priv->read(®s->mcr);
|
|
reg &= ~FLEXCAN_MCR_HALT;
|
|
priv->write(reg, ®s->mcr);
|
|
|
|
while (timeout-- && (priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK))
|
|
udelay(10);
|
|
|
|
if (priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_chip_softreset(struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
unsigned int timeout = FLEXCAN_TIMEOUT_US / 10;
|
|
|
|
priv->write(FLEXCAN_MCR_SOFTRST, ®s->mcr);
|
|
while (timeout-- && (priv->read(®s->mcr) & FLEXCAN_MCR_SOFTRST))
|
|
udelay(10);
|
|
|
|
if (priv->read(®s->mcr) & FLEXCAN_MCR_SOFTRST)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __flexcan_get_berr_counter(const struct net_device *dev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 reg = priv->read(®s->ecr);
|
|
|
|
bec->txerr = (reg >> 0) & 0xff;
|
|
bec->rxerr = (reg >> 8) & 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_get_berr_counter(const struct net_device *dev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
err = clk_prepare_enable(priv->clk_ipg);
|
|
if (err)
|
|
return err;
|
|
|
|
err = clk_prepare_enable(priv->clk_per);
|
|
if (err)
|
|
goto out_disable_ipg;
|
|
|
|
err = __flexcan_get_berr_counter(dev, bec);
|
|
|
|
clk_disable_unprepare(priv->clk_per);
|
|
out_disable_ipg:
|
|
clk_disable_unprepare(priv->clk_ipg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static netdev_tx_t flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
u32 can_id;
|
|
u32 data;
|
|
u32 ctrl = FLEXCAN_MB_CODE_TX_DATA | (cf->can_dlc << 16);
|
|
|
|
if (can_dropped_invalid_skb(dev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (cf->can_id & CAN_EFF_FLAG) {
|
|
can_id = cf->can_id & CAN_EFF_MASK;
|
|
ctrl |= FLEXCAN_MB_CNT_IDE | FLEXCAN_MB_CNT_SRR;
|
|
} else {
|
|
can_id = (cf->can_id & CAN_SFF_MASK) << 18;
|
|
}
|
|
|
|
if (cf->can_id & CAN_RTR_FLAG)
|
|
ctrl |= FLEXCAN_MB_CNT_RTR;
|
|
|
|
if (cf->can_dlc > 0) {
|
|
data = be32_to_cpup((__be32 *)&cf->data[0]);
|
|
priv->write(data, ®s->mb[FLEXCAN_TX_MB].data[0]);
|
|
}
|
|
if (cf->can_dlc > 4) {
|
|
data = be32_to_cpup((__be32 *)&cf->data[4]);
|
|
priv->write(data, ®s->mb[FLEXCAN_TX_MB].data[1]);
|
|
}
|
|
|
|
can_put_echo_skb(skb, dev, 0);
|
|
|
|
priv->write(can_id, ®s->mb[FLEXCAN_TX_MB].can_id);
|
|
priv->write(ctrl, ®s->mb[FLEXCAN_TX_MB].can_ctrl);
|
|
|
|
/* Errata ERR005829 step8:
|
|
* Write twice INACTIVE(0x8) code to first MB.
|
|
*/
|
|
priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
&priv->tx_mb_reserved->can_ctrl);
|
|
priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
&priv->tx_mb_reserved->can_ctrl);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void flexcan_irq_bus_err(struct net_device *dev, u32 reg_esr)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
struct sk_buff *skb;
|
|
struct can_frame *cf;
|
|
bool rx_errors = false, tx_errors = false;
|
|
u32 timestamp;
|
|
|
|
timestamp = priv->read(®s->timer) << 16;
|
|
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
if (unlikely(!skb))
|
|
return;
|
|
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
|
|
if (reg_esr & FLEXCAN_ESR_BIT1_ERR) {
|
|
netdev_dbg(dev, "BIT1_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_BIT1;
|
|
tx_errors = true;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_BIT0_ERR) {
|
|
netdev_dbg(dev, "BIT0_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_BIT0;
|
|
tx_errors = true;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_ACK_ERR) {
|
|
netdev_dbg(dev, "ACK_ERR irq\n");
|
|
cf->can_id |= CAN_ERR_ACK;
|
|
cf->data[3] = CAN_ERR_PROT_LOC_ACK;
|
|
tx_errors = true;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_CRC_ERR) {
|
|
netdev_dbg(dev, "CRC_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_BIT;
|
|
cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
|
|
rx_errors = true;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_FRM_ERR) {
|
|
netdev_dbg(dev, "FRM_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_FORM;
|
|
rx_errors = true;
|
|
}
|
|
if (reg_esr & FLEXCAN_ESR_STF_ERR) {
|
|
netdev_dbg(dev, "STF_ERR irq\n");
|
|
cf->data[2] |= CAN_ERR_PROT_STUFF;
|
|
rx_errors = true;
|
|
}
|
|
|
|
priv->can.can_stats.bus_error++;
|
|
if (rx_errors)
|
|
dev->stats.rx_errors++;
|
|
if (tx_errors)
|
|
dev->stats.tx_errors++;
|
|
|
|
can_rx_offload_queue_sorted(&priv->offload, skb, timestamp);
|
|
}
|
|
|
|
static void flexcan_irq_state(struct net_device *dev, u32 reg_esr)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
struct sk_buff *skb;
|
|
struct can_frame *cf;
|
|
enum can_state new_state, rx_state, tx_state;
|
|
int flt;
|
|
struct can_berr_counter bec;
|
|
u32 timestamp;
|
|
|
|
timestamp = priv->read(®s->timer) << 16;
|
|
|
|
flt = reg_esr & FLEXCAN_ESR_FLT_CONF_MASK;
|
|
if (likely(flt == FLEXCAN_ESR_FLT_CONF_ACTIVE)) {
|
|
tx_state = unlikely(reg_esr & FLEXCAN_ESR_TX_WRN) ?
|
|
CAN_STATE_ERROR_WARNING : CAN_STATE_ERROR_ACTIVE;
|
|
rx_state = unlikely(reg_esr & FLEXCAN_ESR_RX_WRN) ?
|
|
CAN_STATE_ERROR_WARNING : CAN_STATE_ERROR_ACTIVE;
|
|
new_state = max(tx_state, rx_state);
|
|
} else {
|
|
__flexcan_get_berr_counter(dev, &bec);
|
|
new_state = flt == FLEXCAN_ESR_FLT_CONF_PASSIVE ?
|
|
CAN_STATE_ERROR_PASSIVE : CAN_STATE_BUS_OFF;
|
|
rx_state = bec.rxerr >= bec.txerr ? new_state : 0;
|
|
tx_state = bec.rxerr <= bec.txerr ? new_state : 0;
|
|
}
|
|
|
|
/* state hasn't changed */
|
|
if (likely(new_state == priv->can.state))
|
|
return;
|
|
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
if (unlikely(!skb))
|
|
return;
|
|
|
|
can_change_state(dev, cf, tx_state, rx_state);
|
|
|
|
if (unlikely(new_state == CAN_STATE_BUS_OFF))
|
|
can_bus_off(dev);
|
|
|
|
can_rx_offload_queue_sorted(&priv->offload, skb, timestamp);
|
|
}
|
|
|
|
static inline struct flexcan_priv *rx_offload_to_priv(struct can_rx_offload *offload)
|
|
{
|
|
return container_of(offload, struct flexcan_priv, offload);
|
|
}
|
|
|
|
static unsigned int flexcan_mailbox_read(struct can_rx_offload *offload,
|
|
struct can_frame *cf,
|
|
u32 *timestamp, unsigned int n)
|
|
{
|
|
struct flexcan_priv *priv = rx_offload_to_priv(offload);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
struct flexcan_mb __iomem *mb = ®s->mb[n];
|
|
u32 reg_ctrl, reg_id, reg_iflag1;
|
|
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
|
|
u32 code;
|
|
|
|
do {
|
|
reg_ctrl = priv->read(&mb->can_ctrl);
|
|
} while (reg_ctrl & FLEXCAN_MB_CODE_RX_BUSY_BIT);
|
|
|
|
/* is this MB empty? */
|
|
code = reg_ctrl & FLEXCAN_MB_CODE_MASK;
|
|
if ((code != FLEXCAN_MB_CODE_RX_FULL) &&
|
|
(code != FLEXCAN_MB_CODE_RX_OVERRUN))
|
|
return 0;
|
|
|
|
if (code == FLEXCAN_MB_CODE_RX_OVERRUN) {
|
|
/* This MB was overrun, we lost data */
|
|
offload->dev->stats.rx_over_errors++;
|
|
offload->dev->stats.rx_errors++;
|
|
}
|
|
} else {
|
|
reg_iflag1 = priv->read(®s->iflag1);
|
|
if (!(reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE))
|
|
return 0;
|
|
|
|
reg_ctrl = priv->read(&mb->can_ctrl);
|
|
}
|
|
|
|
/* increase timstamp to full 32 bit */
|
|
*timestamp = reg_ctrl << 16;
|
|
|
|
reg_id = priv->read(&mb->can_id);
|
|
if (reg_ctrl & FLEXCAN_MB_CNT_IDE)
|
|
cf->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
|
|
else
|
|
cf->can_id = (reg_id >> 18) & CAN_SFF_MASK;
|
|
|
|
if (reg_ctrl & FLEXCAN_MB_CNT_RTR)
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
cf->can_dlc = get_can_dlc((reg_ctrl >> 16) & 0xf);
|
|
|
|
*(__be32 *)(cf->data + 0) = cpu_to_be32(priv->read(&mb->data[0]));
|
|
*(__be32 *)(cf->data + 4) = cpu_to_be32(priv->read(&mb->data[1]));
|
|
|
|
/* mark as read */
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
|
|
/* Clear IRQ */
|
|
if (n < 32)
|
|
priv->write(BIT(n), ®s->iflag1);
|
|
else
|
|
priv->write(BIT(n - 32), ®s->iflag2);
|
|
} else {
|
|
priv->write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, ®s->iflag1);
|
|
}
|
|
|
|
/* Read the Free Running Timer. It is optional but recommended
|
|
* to unlock Mailbox as soon as possible and make it available
|
|
* for reception.
|
|
*/
|
|
priv->read(®s->timer);
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv)
|
|
{
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 iflag1, iflag2;
|
|
|
|
iflag2 = priv->read(®s->iflag2) & priv->reg_imask2_default &
|
|
~FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB);
|
|
iflag1 = priv->read(®s->iflag1) & priv->reg_imask1_default;
|
|
|
|
return (u64)iflag2 << 32 | iflag1;
|
|
}
|
|
|
|
static irqreturn_t flexcan_irq(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
irqreturn_t handled = IRQ_NONE;
|
|
u32 reg_iflag2, reg_esr;
|
|
enum can_state last_state = priv->can.state;
|
|
|
|
/* reception interrupt */
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
|
|
u64 reg_iflag;
|
|
int ret;
|
|
|
|
while ((reg_iflag = flexcan_read_reg_iflag_rx(priv))) {
|
|
handled = IRQ_HANDLED;
|
|
ret = can_rx_offload_irq_offload_timestamp(&priv->offload,
|
|
reg_iflag);
|
|
if (!ret)
|
|
break;
|
|
}
|
|
} else {
|
|
u32 reg_iflag1;
|
|
|
|
reg_iflag1 = priv->read(®s->iflag1);
|
|
if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE) {
|
|
handled = IRQ_HANDLED;
|
|
can_rx_offload_irq_offload_fifo(&priv->offload);
|
|
}
|
|
|
|
/* FIFO overflow interrupt */
|
|
if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_OVERFLOW) {
|
|
handled = IRQ_HANDLED;
|
|
priv->write(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW,
|
|
®s->iflag1);
|
|
dev->stats.rx_over_errors++;
|
|
dev->stats.rx_errors++;
|
|
}
|
|
}
|
|
|
|
reg_iflag2 = priv->read(®s->iflag2);
|
|
|
|
/* transmission complete interrupt */
|
|
if (reg_iflag2 & FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB)) {
|
|
u32 reg_ctrl = priv->read(®s->mb[FLEXCAN_TX_MB].can_ctrl);
|
|
|
|
handled = IRQ_HANDLED;
|
|
stats->tx_bytes += can_rx_offload_get_echo_skb(&priv->offload,
|
|
0, reg_ctrl << 16);
|
|
stats->tx_packets++;
|
|
can_led_event(dev, CAN_LED_EVENT_TX);
|
|
|
|
/* after sending a RTR frame MB is in RX mode */
|
|
priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
®s->mb[FLEXCAN_TX_MB].can_ctrl);
|
|
priv->write(FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB), ®s->iflag2);
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
reg_esr = priv->read(®s->esr);
|
|
|
|
/* ACK all bus error and state change IRQ sources */
|
|
if (reg_esr & FLEXCAN_ESR_ALL_INT) {
|
|
handled = IRQ_HANDLED;
|
|
priv->write(reg_esr & FLEXCAN_ESR_ALL_INT, ®s->esr);
|
|
}
|
|
|
|
/* state change interrupt or broken error state quirk fix is enabled */
|
|
if ((reg_esr & FLEXCAN_ESR_ERR_STATE) ||
|
|
(priv->devtype_data->quirks & (FLEXCAN_QUIRK_BROKEN_WERR_STATE |
|
|
FLEXCAN_QUIRK_BROKEN_PERR_STATE)))
|
|
flexcan_irq_state(dev, reg_esr);
|
|
|
|
/* bus error IRQ - handle if bus error reporting is activated */
|
|
if ((reg_esr & FLEXCAN_ESR_ERR_BUS) &&
|
|
(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING))
|
|
flexcan_irq_bus_err(dev, reg_esr);
|
|
|
|
/* availability of error interrupt among state transitions in case
|
|
* bus error reporting is de-activated and
|
|
* FLEXCAN_QUIRK_BROKEN_PERR_STATE is enabled:
|
|
* +--------------------------------------------------------------+
|
|
* | +----------------------------------------------+ [stopped / |
|
|
* | | | sleeping] -+
|
|
* +-+-> active <-> warning <-> passive -> bus off -+
|
|
* ___________^^^^^^^^^^^^_______________________________
|
|
* disabled(1) enabled disabled
|
|
*
|
|
* (1): enabled if FLEXCAN_QUIRK_BROKEN_WERR_STATE is enabled
|
|
*/
|
|
if ((last_state != priv->can.state) &&
|
|
(priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_PERR_STATE) &&
|
|
!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)) {
|
|
switch (priv->can.state) {
|
|
case CAN_STATE_ERROR_ACTIVE:
|
|
if (priv->devtype_data->quirks &
|
|
FLEXCAN_QUIRK_BROKEN_WERR_STATE)
|
|
flexcan_error_irq_enable(priv);
|
|
else
|
|
flexcan_error_irq_disable(priv);
|
|
break;
|
|
|
|
case CAN_STATE_ERROR_WARNING:
|
|
flexcan_error_irq_enable(priv);
|
|
break;
|
|
|
|
case CAN_STATE_ERROR_PASSIVE:
|
|
case CAN_STATE_BUS_OFF:
|
|
flexcan_error_irq_disable(priv);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void flexcan_set_bittiming(struct net_device *dev)
|
|
{
|
|
const struct flexcan_priv *priv = netdev_priv(dev);
|
|
const struct can_bittiming *bt = &priv->can.bittiming;
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 reg;
|
|
|
|
reg = priv->read(®s->ctrl);
|
|
reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
|
|
FLEXCAN_CTRL_RJW(0x3) |
|
|
FLEXCAN_CTRL_PSEG1(0x7) |
|
|
FLEXCAN_CTRL_PSEG2(0x7) |
|
|
FLEXCAN_CTRL_PROPSEG(0x7) |
|
|
FLEXCAN_CTRL_LPB |
|
|
FLEXCAN_CTRL_SMP |
|
|
FLEXCAN_CTRL_LOM);
|
|
|
|
reg |= FLEXCAN_CTRL_PRESDIV(bt->brp - 1) |
|
|
FLEXCAN_CTRL_PSEG1(bt->phase_seg1 - 1) |
|
|
FLEXCAN_CTRL_PSEG2(bt->phase_seg2 - 1) |
|
|
FLEXCAN_CTRL_RJW(bt->sjw - 1) |
|
|
FLEXCAN_CTRL_PROPSEG(bt->prop_seg - 1);
|
|
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
|
|
reg |= FLEXCAN_CTRL_LPB;
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
|
|
reg |= FLEXCAN_CTRL_LOM;
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
|
|
reg |= FLEXCAN_CTRL_SMP;
|
|
|
|
netdev_dbg(dev, "writing ctrl=0x%08x\n", reg);
|
|
priv->write(reg, ®s->ctrl);
|
|
|
|
/* print chip status */
|
|
netdev_dbg(dev, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
|
|
priv->read(®s->mcr), priv->read(®s->ctrl));
|
|
}
|
|
|
|
/* flexcan_chip_start
|
|
*
|
|
* this functions is entered with clocks enabled
|
|
*
|
|
*/
|
|
static int flexcan_chip_start(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 reg_mcr, reg_ctrl, reg_ctrl2, reg_mecr;
|
|
int err, i;
|
|
|
|
/* enable module */
|
|
err = flexcan_chip_enable(priv);
|
|
if (err)
|
|
return err;
|
|
|
|
/* soft reset */
|
|
err = flexcan_chip_softreset(priv);
|
|
if (err)
|
|
goto out_chip_disable;
|
|
|
|
flexcan_set_bittiming(dev);
|
|
|
|
/* MCR
|
|
*
|
|
* enable freeze
|
|
* enable fifo
|
|
* halt now
|
|
* only supervisor access
|
|
* enable warning int
|
|
* disable local echo
|
|
* enable individual RX masking
|
|
* choose format C
|
|
* set max mailbox number
|
|
*/
|
|
reg_mcr = priv->read(®s->mcr);
|
|
reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff);
|
|
reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT | FLEXCAN_MCR_SUPV |
|
|
FLEXCAN_MCR_WRN_EN | FLEXCAN_MCR_SRX_DIS | FLEXCAN_MCR_IRMQ |
|
|
FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(FLEXCAN_TX_MB);
|
|
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
|
|
reg_mcr &= ~FLEXCAN_MCR_FEN;
|
|
else
|
|
reg_mcr |= FLEXCAN_MCR_FEN;
|
|
|
|
netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr);
|
|
priv->write(reg_mcr, ®s->mcr);
|
|
|
|
/* CTRL
|
|
*
|
|
* disable timer sync feature
|
|
*
|
|
* disable auto busoff recovery
|
|
* transmit lowest buffer first
|
|
*
|
|
* enable tx and rx warning interrupt
|
|
* enable bus off interrupt
|
|
* (== FLEXCAN_CTRL_ERR_STATE)
|
|
*/
|
|
reg_ctrl = priv->read(®s->ctrl);
|
|
reg_ctrl &= ~FLEXCAN_CTRL_TSYN;
|
|
reg_ctrl |= FLEXCAN_CTRL_BOFF_REC | FLEXCAN_CTRL_LBUF |
|
|
FLEXCAN_CTRL_ERR_STATE;
|
|
|
|
/* enable the "error interrupt" (FLEXCAN_CTRL_ERR_MSK),
|
|
* on most Flexcan cores, too. Otherwise we don't get
|
|
* any error warning or passive interrupts.
|
|
*/
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_WERR_STATE ||
|
|
priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
|
|
reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
|
|
else
|
|
reg_ctrl &= ~FLEXCAN_CTRL_ERR_MSK;
|
|
|
|
/* save for later use */
|
|
priv->reg_ctrl_default = reg_ctrl;
|
|
/* leave interrupts disabled for now */
|
|
reg_ctrl &= ~FLEXCAN_CTRL_ERR_ALL;
|
|
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
|
|
priv->write(reg_ctrl, ®s->ctrl);
|
|
|
|
if ((priv->devtype_data->quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
|
|
reg_ctrl2 = priv->read(®s->ctrl2);
|
|
reg_ctrl2 |= FLEXCAN_CTRL2_EACEN | FLEXCAN_CTRL2_RRS;
|
|
priv->write(reg_ctrl2, ®s->ctrl2);
|
|
}
|
|
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
|
|
for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) {
|
|
priv->write(FLEXCAN_MB_CODE_RX_EMPTY,
|
|
®s->mb[i].can_ctrl);
|
|
}
|
|
} else {
|
|
/* clear and invalidate unused mailboxes first */
|
|
for (i = FLEXCAN_TX_MB_RESERVED_OFF_FIFO; i <= ARRAY_SIZE(regs->mb); i++) {
|
|
priv->write(FLEXCAN_MB_CODE_RX_INACTIVE,
|
|
®s->mb[i].can_ctrl);
|
|
}
|
|
}
|
|
|
|
/* Errata ERR005829: mark first TX mailbox as INACTIVE */
|
|
priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
&priv->tx_mb_reserved->can_ctrl);
|
|
|
|
/* mark TX mailbox as INACTIVE */
|
|
priv->write(FLEXCAN_MB_CODE_TX_INACTIVE,
|
|
®s->mb[FLEXCAN_TX_MB].can_ctrl);
|
|
|
|
/* acceptance mask/acceptance code (accept everything) */
|
|
priv->write(0x0, ®s->rxgmask);
|
|
priv->write(0x0, ®s->rx14mask);
|
|
priv->write(0x0, ®s->rx15mask);
|
|
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_RXFG)
|
|
priv->write(0x0, ®s->rxfgmask);
|
|
|
|
/* clear acceptance filters */
|
|
for (i = 0; i < ARRAY_SIZE(regs->mb); i++)
|
|
priv->write(0, ®s->rximr[i]);
|
|
|
|
/* On Vybrid, disable memory error detection interrupts
|
|
* and freeze mode.
|
|
* This also works around errata e5295 which generates
|
|
* false positive memory errors and put the device in
|
|
* freeze mode.
|
|
*/
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_MECR) {
|
|
/* Follow the protocol as described in "Detection
|
|
* and Correction of Memory Errors" to write to
|
|
* MECR register
|
|
*/
|
|
reg_ctrl2 = priv->read(®s->ctrl2);
|
|
reg_ctrl2 |= FLEXCAN_CTRL2_ECRWRE;
|
|
priv->write(reg_ctrl2, ®s->ctrl2);
|
|
|
|
reg_mecr = priv->read(®s->mecr);
|
|
reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS;
|
|
priv->write(reg_mecr, ®s->mecr);
|
|
reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK |
|
|
FLEXCAN_MECR_FANCEI_MSK);
|
|
priv->write(reg_mecr, ®s->mecr);
|
|
}
|
|
|
|
err = flexcan_transceiver_enable(priv);
|
|
if (err)
|
|
goto out_chip_disable;
|
|
|
|
/* synchronize with the can bus */
|
|
err = flexcan_chip_unfreeze(priv);
|
|
if (err)
|
|
goto out_transceiver_disable;
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
/* enable interrupts atomically */
|
|
disable_irq(dev->irq);
|
|
priv->write(priv->reg_ctrl_default, ®s->ctrl);
|
|
priv->write(priv->reg_imask1_default, ®s->imask1);
|
|
priv->write(priv->reg_imask2_default, ®s->imask2);
|
|
enable_irq(dev->irq);
|
|
|
|
/* print chip status */
|
|
netdev_dbg(dev, "%s: reading mcr=0x%08x ctrl=0x%08x\n", __func__,
|
|
priv->read(®s->mcr), priv->read(®s->ctrl));
|
|
|
|
return 0;
|
|
|
|
out_transceiver_disable:
|
|
flexcan_transceiver_disable(priv);
|
|
out_chip_disable:
|
|
flexcan_chip_disable(priv);
|
|
return err;
|
|
}
|
|
|
|
/* flexcan_chip_stop
|
|
*
|
|
* this functions is entered with clocks enabled
|
|
*/
|
|
static void flexcan_chip_stop(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
|
|
/* freeze + disable module */
|
|
flexcan_chip_freeze(priv);
|
|
flexcan_chip_disable(priv);
|
|
|
|
/* Disable all interrupts */
|
|
priv->write(0, ®s->imask2);
|
|
priv->write(0, ®s->imask1);
|
|
priv->write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
|
|
®s->ctrl);
|
|
|
|
flexcan_transceiver_disable(priv);
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
}
|
|
|
|
static int flexcan_open(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
err = clk_prepare_enable(priv->clk_ipg);
|
|
if (err)
|
|
return err;
|
|
|
|
err = clk_prepare_enable(priv->clk_per);
|
|
if (err)
|
|
goto out_disable_ipg;
|
|
|
|
err = open_candev(dev);
|
|
if (err)
|
|
goto out_disable_per;
|
|
|
|
err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev);
|
|
if (err)
|
|
goto out_close;
|
|
|
|
/* start chip and queuing */
|
|
err = flexcan_chip_start(dev);
|
|
if (err)
|
|
goto out_free_irq;
|
|
|
|
can_led_event(dev, CAN_LED_EVENT_OPEN);
|
|
|
|
can_rx_offload_enable(&priv->offload);
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
|
|
out_free_irq:
|
|
free_irq(dev->irq, dev);
|
|
out_close:
|
|
close_candev(dev);
|
|
out_disable_per:
|
|
clk_disable_unprepare(priv->clk_per);
|
|
out_disable_ipg:
|
|
clk_disable_unprepare(priv->clk_ipg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int flexcan_close(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
can_rx_offload_disable(&priv->offload);
|
|
flexcan_chip_stop(dev);
|
|
|
|
free_irq(dev->irq, dev);
|
|
clk_disable_unprepare(priv->clk_per);
|
|
clk_disable_unprepare(priv->clk_ipg);
|
|
|
|
close_candev(dev);
|
|
|
|
can_led_event(dev, CAN_LED_EVENT_STOP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int flexcan_set_mode(struct net_device *dev, enum can_mode mode)
|
|
{
|
|
int err;
|
|
|
|
switch (mode) {
|
|
case CAN_MODE_START:
|
|
err = flexcan_chip_start(dev);
|
|
if (err)
|
|
return err;
|
|
|
|
netif_wake_queue(dev);
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops flexcan_netdev_ops = {
|
|
.ndo_open = flexcan_open,
|
|
.ndo_stop = flexcan_close,
|
|
.ndo_start_xmit = flexcan_start_xmit,
|
|
.ndo_change_mtu = can_change_mtu,
|
|
};
|
|
|
|
static int register_flexcandev(struct net_device *dev)
|
|
{
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 reg, err;
|
|
|
|
err = clk_prepare_enable(priv->clk_ipg);
|
|
if (err)
|
|
return err;
|
|
|
|
err = clk_prepare_enable(priv->clk_per);
|
|
if (err)
|
|
goto out_disable_ipg;
|
|
|
|
/* select "bus clock", chip must be disabled */
|
|
err = flexcan_chip_disable(priv);
|
|
if (err)
|
|
goto out_disable_per;
|
|
reg = priv->read(®s->ctrl);
|
|
reg |= FLEXCAN_CTRL_CLK_SRC;
|
|
priv->write(reg, ®s->ctrl);
|
|
|
|
err = flexcan_chip_enable(priv);
|
|
if (err)
|
|
goto out_chip_disable;
|
|
|
|
/* set freeze, halt and activate FIFO, restrict register access */
|
|
reg = priv->read(®s->mcr);
|
|
reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
|
|
FLEXCAN_MCR_FEN | FLEXCAN_MCR_SUPV;
|
|
priv->write(reg, ®s->mcr);
|
|
|
|
/* Currently we only support newer versions of this core
|
|
* featuring a RX hardware FIFO (although this driver doesn't
|
|
* make use of it on some cores). Older cores, found on some
|
|
* Coldfire derivates are not tested.
|
|
*/
|
|
reg = priv->read(®s->mcr);
|
|
if (!(reg & FLEXCAN_MCR_FEN)) {
|
|
netdev_err(dev, "Could not enable RX FIFO, unsupported core\n");
|
|
err = -ENODEV;
|
|
goto out_chip_disable;
|
|
}
|
|
|
|
err = register_candev(dev);
|
|
|
|
/* disable core and turn off clocks */
|
|
out_chip_disable:
|
|
flexcan_chip_disable(priv);
|
|
out_disable_per:
|
|
clk_disable_unprepare(priv->clk_per);
|
|
out_disable_ipg:
|
|
clk_disable_unprepare(priv->clk_ipg);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void unregister_flexcandev(struct net_device *dev)
|
|
{
|
|
unregister_candev(dev);
|
|
}
|
|
|
|
static const struct of_device_id flexcan_of_match[] = {
|
|
{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
|
|
{ .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, },
|
|
{ .compatible = "fsl,imx53-flexcan", .data = &fsl_imx25_devtype_data, },
|
|
{ .compatible = "fsl,imx35-flexcan", .data = &fsl_imx25_devtype_data, },
|
|
{ .compatible = "fsl,imx25-flexcan", .data = &fsl_imx25_devtype_data, },
|
|
{ .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, },
|
|
{ .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, },
|
|
{ .compatible = "fsl,ls1021ar2-flexcan", .data = &fsl_ls1021a_r2_devtype_data, },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, flexcan_of_match);
|
|
|
|
static const struct platform_device_id flexcan_id_table[] = {
|
|
{ .name = "flexcan", .driver_data = (kernel_ulong_t)&fsl_p1010_devtype_data, },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, flexcan_id_table);
|
|
|
|
static int flexcan_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
const struct flexcan_devtype_data *devtype_data;
|
|
struct net_device *dev;
|
|
struct flexcan_priv *priv;
|
|
struct regulator *reg_xceiver;
|
|
struct resource *mem;
|
|
struct clk *clk_ipg = NULL, *clk_per = NULL;
|
|
struct flexcan_regs __iomem *regs;
|
|
int err, irq;
|
|
u32 clock_freq = 0;
|
|
|
|
reg_xceiver = devm_regulator_get(&pdev->dev, "xceiver");
|
|
if (PTR_ERR(reg_xceiver) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
else if (IS_ERR(reg_xceiver))
|
|
reg_xceiver = NULL;
|
|
|
|
if (pdev->dev.of_node)
|
|
of_property_read_u32(pdev->dev.of_node,
|
|
"clock-frequency", &clock_freq);
|
|
|
|
if (!clock_freq) {
|
|
clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(clk_ipg)) {
|
|
dev_err(&pdev->dev, "no ipg clock defined\n");
|
|
return PTR_ERR(clk_ipg);
|
|
}
|
|
|
|
clk_per = devm_clk_get(&pdev->dev, "per");
|
|
if (IS_ERR(clk_per)) {
|
|
dev_err(&pdev->dev, "no per clock defined\n");
|
|
return PTR_ERR(clk_per);
|
|
}
|
|
clock_freq = clk_get_rate(clk_per);
|
|
}
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0)
|
|
return -ENODEV;
|
|
|
|
regs = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
of_id = of_match_device(flexcan_of_match, &pdev->dev);
|
|
if (of_id) {
|
|
devtype_data = of_id->data;
|
|
} else if (platform_get_device_id(pdev)->driver_data) {
|
|
devtype_data = (struct flexcan_devtype_data *)
|
|
platform_get_device_id(pdev)->driver_data;
|
|
} else {
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev = alloc_candev(sizeof(struct flexcan_priv), 1);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
dev->netdev_ops = &flexcan_netdev_ops;
|
|
dev->irq = irq;
|
|
dev->flags |= IFF_ECHO;
|
|
|
|
priv = netdev_priv(dev);
|
|
|
|
if (of_property_read_bool(pdev->dev.of_node, "big-endian") ||
|
|
devtype_data->quirks & FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN) {
|
|
priv->read = flexcan_read_be;
|
|
priv->write = flexcan_write_be;
|
|
} else {
|
|
priv->read = flexcan_read_le;
|
|
priv->write = flexcan_write_le;
|
|
}
|
|
|
|
priv->can.clock.freq = clock_freq;
|
|
priv->can.bittiming_const = &flexcan_bittiming_const;
|
|
priv->can.do_set_mode = flexcan_set_mode;
|
|
priv->can.do_get_berr_counter = flexcan_get_berr_counter;
|
|
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
|
|
CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_3_SAMPLES |
|
|
CAN_CTRLMODE_BERR_REPORTING;
|
|
priv->regs = regs;
|
|
priv->clk_ipg = clk_ipg;
|
|
priv->clk_per = clk_per;
|
|
priv->devtype_data = devtype_data;
|
|
priv->reg_xceiver = reg_xceiver;
|
|
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
|
|
priv->tx_mb_reserved = ®s->mb[FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP];
|
|
else
|
|
priv->tx_mb_reserved = ®s->mb[FLEXCAN_TX_MB_RESERVED_OFF_FIFO];
|
|
|
|
priv->reg_imask1_default = 0;
|
|
priv->reg_imask2_default = FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB);
|
|
|
|
priv->offload.mailbox_read = flexcan_mailbox_read;
|
|
|
|
if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
|
|
u64 imask;
|
|
|
|
priv->offload.mb_first = FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST;
|
|
priv->offload.mb_last = FLEXCAN_RX_MB_OFF_TIMESTAMP_LAST;
|
|
|
|
imask = GENMASK_ULL(priv->offload.mb_last, priv->offload.mb_first);
|
|
priv->reg_imask1_default |= imask;
|
|
priv->reg_imask2_default |= imask >> 32;
|
|
|
|
err = can_rx_offload_add_timestamp(dev, &priv->offload);
|
|
} else {
|
|
priv->reg_imask1_default |= FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
|
|
FLEXCAN_IFLAG_RX_FIFO_AVAILABLE;
|
|
err = can_rx_offload_add_fifo(dev, &priv->offload, FLEXCAN_NAPI_WEIGHT);
|
|
}
|
|
if (err)
|
|
goto failed_offload;
|
|
|
|
err = register_flexcandev(dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "registering netdev failed\n");
|
|
goto failed_register;
|
|
}
|
|
|
|
devm_can_led_init(dev);
|
|
|
|
dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
|
|
priv->regs, dev->irq);
|
|
|
|
return 0;
|
|
|
|
failed_offload:
|
|
failed_register:
|
|
free_candev(dev);
|
|
return err;
|
|
}
|
|
|
|
static int flexcan_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
|
|
unregister_flexcandev(dev);
|
|
can_rx_offload_del(&priv->offload);
|
|
free_candev(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused flexcan_suspend(struct device *device)
|
|
{
|
|
struct net_device *dev = dev_get_drvdata(device);
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
if (netif_running(dev)) {
|
|
err = flexcan_chip_disable(priv);
|
|
if (err)
|
|
return err;
|
|
netif_stop_queue(dev);
|
|
netif_device_detach(dev);
|
|
}
|
|
priv->can.state = CAN_STATE_SLEEPING;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused flexcan_resume(struct device *device)
|
|
{
|
|
struct net_device *dev = dev_get_drvdata(device);
|
|
struct flexcan_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
if (netif_running(dev)) {
|
|
netif_device_attach(dev);
|
|
netif_start_queue(dev);
|
|
err = flexcan_chip_enable(priv);
|
|
if (err)
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(flexcan_pm_ops, flexcan_suspend, flexcan_resume);
|
|
|
|
static struct platform_driver flexcan_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.pm = &flexcan_pm_ops,
|
|
.of_match_table = flexcan_of_match,
|
|
},
|
|
.probe = flexcan_probe,
|
|
.remove = flexcan_remove,
|
|
.id_table = flexcan_id_table,
|
|
};
|
|
|
|
module_platform_driver(flexcan_driver);
|
|
|
|
MODULE_AUTHOR("Sascha Hauer <kernel@pengutronix.de>, "
|
|
"Marc Kleine-Budde <kernel@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("CAN port driver for flexcan based chip");
|