mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-02 19:16:40 +07:00
d6aef84a48
The babbage board has a DVI-I output which allows to output analog and digital signals simultaneously. This patch adds support for it to the devicetree. The DDC signals are not wired up on the board, so DRM will fall back on default VESA modes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org>
284 lines
6.4 KiB
Plaintext
284 lines
6.4 KiB
Plaintext
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/include/ "imx51.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX51 Babbage Board";
|
|
compatible = "fsl,imx51-babbage", "fsl,imx51";
|
|
|
|
memory {
|
|
reg = <0x90000000 0x20000000>;
|
|
};
|
|
|
|
soc {
|
|
display@di0 {
|
|
compatible = "fsl,imx-parallel-display";
|
|
crtcs = <&ipu 0>;
|
|
interface-pix-fmt = "rgb24";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
|
|
};
|
|
|
|
display@di1 {
|
|
compatible = "fsl,imx-parallel-display";
|
|
crtcs = <&ipu 1>;
|
|
interface-pix-fmt = "rgb565";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
|
|
};
|
|
|
|
aips@70000000 { /* aips-1 */
|
|
spba@70000000 {
|
|
esdhc@70004000 { /* ESDHC1 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1_1>;
|
|
fsl,cd-controller;
|
|
fsl,wp-controller;
|
|
status = "okay";
|
|
};
|
|
|
|
esdhc@70008000 { /* ESDHC2 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc2_1>;
|
|
cd-gpios = <&gpio1 6 0>;
|
|
wp-gpios = <&gpio1 5 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
uart3: serial@7000c000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3_1>;
|
|
fsl,uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
ecspi@70010000 { /* ECSPI1 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1_1>;
|
|
fsl,spi-num-chipselects = <2>;
|
|
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
|
|
status = "okay";
|
|
|
|
pmic: mc13892@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mc13892";
|
|
spi-max-frequency = <6000000>;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <8 0x4>;
|
|
|
|
regulators {
|
|
sw1_reg: sw1 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1375000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3_reg: sw3 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4_reg: sw4 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: vpll {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig_reg: vdig {
|
|
regulator-min-microvolt = <1650000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsd_reg: vsd {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
};
|
|
|
|
vusb2_reg: vusb2 {
|
|
regulator-min-microvolt = <2400000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vvideo_reg: vvideo {
|
|
regulator-min-microvolt = <2775000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
};
|
|
|
|
vaudio_reg: vaudio {
|
|
regulator-min-microvolt = <2300000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vcam_reg: vcam {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
flash: at45db321d@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
|
|
spi-max-frequency = <25000000>;
|
|
reg = <1>;
|
|
|
|
partition@0 {
|
|
label = "U-Boot";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "Kernel";
|
|
reg = <0x40000 0x3c0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ssi2: ssi@70014000 {
|
|
fsl,mode = "i2s-slave";
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
iomuxc@73fa8000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
hog {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */
|
|
697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */
|
|
737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */
|
|
740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */
|
|
121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */
|
|
402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */
|
|
405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
uart1: serial@73fbc000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1_1>;
|
|
fsl,uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
uart2: serial@73fc0000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2_1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
aips@80000000 { /* aips-2 */
|
|
i2c@83fc4000 { /* I2C2 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2_1>;
|
|
status = "okay";
|
|
|
|
sgtl5000: codec@0a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
clock-frequency = <26000000>;
|
|
VDDA-supply = <&vdig_reg>;
|
|
VDDIO-supply = <&vvideo_reg>;
|
|
};
|
|
};
|
|
|
|
audmux@83fd0000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux_1>;
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@83fec000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec_1>;
|
|
phy-mode = "mii";
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
label = "Power Button";
|
|
gpios = <&gpio2 21 0>;
|
|
linux,code = <116>; /* KEY_POWER */
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx51-babbage-sgtl5000",
|
|
"fsl,imx-audio-sgtl5000";
|
|
model = "imx51-babbage-sgtl5000";
|
|
ssi-controller = <&ssi2>;
|
|
audio-codec = <&sgtl5000>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <2>;
|
|
mux-ext-port = <3>;
|
|
};
|
|
};
|