Benjamin Rood b650a8806e pm80xx: wait a minimum of 500ms before issuing commands to SPCv ... The documentation for the 8070 and 8072 SPCv chip explicitly states that a minimum of 500ms must elapse before issuing commands, otherwise the SPCv may not process them and the firmware may get into an unrecoverable state requiring a reboot. While the Linux guys will probably think this is 'racy', it is called out in the chip documentation and inserting this delay makes power management function properly. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>		2015-11-02 23:40:35 -05:00
..
Makefile	[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files	2013-05-10 07:47:47 -07:00
pm80xx_hwi.c	pm80xx: do not examine registers for iButton feature if ATTO adapter	2015-11-02 23:39:35 -05:00
pm80xx_hwi.h	pm80xx: Handling Invalid SSP Response frame	2015-08-26 17:18:31 -07:00
pm8001_chips.h	[SCSI] pm8001: fix endian issue with code optimization.	2012-02-29 16:54:09 -06:00
pm8001_ctl.c	pm8001: Update nvmd response data to request buffer	2014-09-16 09:09:48 -07:00
pm8001_ctl.h	[SCSI] pm80xx: Firmware logging support.	2013-10-25 09:58:16 +01:00
pm8001_defs.h	pm80xx: add support for PMC Sierra 8070 and PMC Sierra 8072 SAS controllers	2015-11-02 23:34:12 -05:00
pm8001_hwi.c	pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY	2015-09-06 11:53:31 -07:00
pm8001_hwi.h	[SCSI] pm80xx: Resetting the phy state.	2013-12-02 10:35:52 -08:00
pm8001_init.c	pm80xx: wait a minimum of 500ms before issuing commands to SPCv	2015-11-02 23:40:35 -05:00
pm8001_sas.c	pm80xx: Fix for Incorrect DMA Unmapping of SG List	2015-08-26 17:11:01 -07:00
pm8001_sas.h	pm80xx: set PHY profiles for ATTO 12Gb SAS controllers	2015-11-02 23:39:02 -05:00