mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-13 11:56:46 +07:00
7e367c18c0
Looks like the LCD panel on LDP has been broken quite a while, and
recently got fixed by commit 0b2aa8bed3
(gpio: twl4030: Fix regression
for twl gpio output). However, there's still an issue left where the panel
backlight does not come on if the LCD drivers are built into the
kernel.
Fix the issue by registering the DPI LCD panel only after the twl4030
GPIO has probed.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[tony@atomide.com: updated per Tomi's comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
431 lines
10 KiB
C
431 lines
10 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-ldp.c
|
|
*
|
|
* Copyright (C) 2008 Texas Instruments Inc.
|
|
* Nishant Kamat <nskamat@ti.com>
|
|
*
|
|
* Modified from mach-omap2/board-3430sdp.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/io.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/usb/phy.h>
|
|
#include <linux/platform_data/spi-omap2-mcspi.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "common.h"
|
|
#include "gpmc.h"
|
|
#include "gpmc-smsc911x.h"
|
|
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-data.h>
|
|
|
|
#include "board-flash.h"
|
|
#include "mux.h"
|
|
#include "hsmmc.h"
|
|
#include "control.h"
|
|
#include "common-board-devices.h"
|
|
|
|
#define LDP_SMSC911X_CS 1
|
|
#define LDP_SMSC911X_GPIO 152
|
|
#define DEBUG_BASE 0x08000000
|
|
#define LDP_ETHR_START DEBUG_BASE
|
|
|
|
static uint32_t board_keymap[] = {
|
|
KEY(0, 0, KEY_1),
|
|
KEY(1, 0, KEY_2),
|
|
KEY(2, 0, KEY_3),
|
|
KEY(0, 1, KEY_4),
|
|
KEY(1, 1, KEY_5),
|
|
KEY(2, 1, KEY_6),
|
|
KEY(3, 1, KEY_F5),
|
|
KEY(0, 2, KEY_7),
|
|
KEY(1, 2, KEY_8),
|
|
KEY(2, 2, KEY_9),
|
|
KEY(3, 2, KEY_F6),
|
|
KEY(0, 3, KEY_F7),
|
|
KEY(1, 3, KEY_0),
|
|
KEY(2, 3, KEY_F8),
|
|
PERSISTENT_KEY(4, 5),
|
|
KEY(4, 4, KEY_VOLUMEUP),
|
|
KEY(5, 5, KEY_VOLUMEDOWN),
|
|
0
|
|
};
|
|
|
|
static struct matrix_keymap_data board_map_data = {
|
|
.keymap = board_keymap,
|
|
.keymap_size = ARRAY_SIZE(board_keymap),
|
|
};
|
|
|
|
static struct twl4030_keypad_data ldp_kp_twl4030_data = {
|
|
.keymap_data = &board_map_data,
|
|
.rows = 6,
|
|
.cols = 6,
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
|
|
[0] = {
|
|
.code = KEY_ENTER,
|
|
.gpio = 101,
|
|
.desc = "enter sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[1] = {
|
|
.code = KEY_F1,
|
|
.gpio = 102,
|
|
.desc = "func 1",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[2] = {
|
|
.code = KEY_F2,
|
|
.gpio = 103,
|
|
.desc = "func 2",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[3] = {
|
|
.code = KEY_F3,
|
|
.gpio = 104,
|
|
.desc = "func 3",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[4] = {
|
|
.code = KEY_F4,
|
|
.gpio = 105,
|
|
.desc = "func 4",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[5] = {
|
|
.code = KEY_LEFT,
|
|
.gpio = 106,
|
|
.desc = "left sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[6] = {
|
|
.code = KEY_RIGHT,
|
|
.gpio = 107,
|
|
.desc = "right sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[7] = {
|
|
.code = KEY_UP,
|
|
.gpio = 108,
|
|
.desc = "up sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
[8] = {
|
|
.code = KEY_DOWN,
|
|
.gpio = 109,
|
|
.desc = "down sw",
|
|
.active_low = 1,
|
|
.debounce_interval = 30,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data ldp_gpio_keys = {
|
|
.buttons = ldp_gpio_keys_buttons,
|
|
.nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons),
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct platform_device ldp_gpio_keys_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &ldp_gpio_keys,
|
|
},
|
|
};
|
|
|
|
static struct omap_smsc911x_platform_data smsc911x_cfg = {
|
|
.cs = LDP_SMSC911X_CS,
|
|
.gpio_irq = LDP_SMSC911X_GPIO,
|
|
.gpio_reset = -EINVAL,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
};
|
|
|
|
static inline void __init ldp_init_smsc911x(void)
|
|
{
|
|
gpmc_smsc911x_init(&smsc911x_cfg);
|
|
}
|
|
|
|
/* LCD */
|
|
|
|
#define LCD_PANEL_RESET_GPIO 55
|
|
#define LCD_PANEL_QVGA_GPIO 56
|
|
|
|
static const struct display_timing ldp_lcd_videomode = {
|
|
.pixelclock = { 0, 5400000, 0 },
|
|
|
|
.hactive = { 0, 240, 0 },
|
|
.hfront_porch = { 0, 3, 0 },
|
|
.hback_porch = { 0, 39, 0 },
|
|
.hsync_len = { 0, 3, 0 },
|
|
|
|
.vactive = { 0, 320, 0 },
|
|
.vfront_porch = { 0, 2, 0 },
|
|
.vback_porch = { 0, 7, 0 },
|
|
.vsync_len = { 0, 1, 0 },
|
|
|
|
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
|
|
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
|
|
};
|
|
|
|
static struct panel_dpi_platform_data ldp_lcd_pdata = {
|
|
.name = "lcd",
|
|
.source = "dpi.0",
|
|
|
|
.data_lines = 18,
|
|
|
|
.display_timing = &ldp_lcd_videomode,
|
|
|
|
.enable_gpio = -1, /* filled in code */
|
|
.backlight_gpio = -1, /* filled in code */
|
|
};
|
|
|
|
static struct platform_device ldp_lcd_device = {
|
|
.name = "panel-dpi",
|
|
.id = 0,
|
|
.dev.platform_data = &ldp_lcd_pdata,
|
|
};
|
|
|
|
static struct omap_dss_board_info ldp_dss_data = {
|
|
.default_display_name = "lcd",
|
|
};
|
|
|
|
static void __init ldp_display_init(void)
|
|
{
|
|
int r;
|
|
|
|
static struct gpio gpios[] __initdata = {
|
|
{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
|
|
{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
|
|
};
|
|
|
|
r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
|
|
if (r) {
|
|
pr_err("Cannot request LCD GPIOs, error %d\n", r);
|
|
return;
|
|
}
|
|
|
|
omap_display_init(&ldp_dss_data);
|
|
}
|
|
|
|
static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
|
|
{
|
|
int res;
|
|
|
|
/* LCD enable GPIO */
|
|
ldp_lcd_pdata.enable_gpio = gpio + 7;
|
|
|
|
/* Backlight enable GPIO */
|
|
ldp_lcd_pdata.backlight_gpio = gpio + 15;
|
|
|
|
res = platform_device_register(&ldp_lcd_device);
|
|
if (res)
|
|
pr_err("Unable to register LCD: %d\n", res);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct twl4030_gpio_platform_data ldp_gpio_data = {
|
|
.setup = ldp_twl_gpio_setup,
|
|
};
|
|
|
|
static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
|
|
};
|
|
|
|
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
|
|
static struct regulator_init_data ldp_vmmc1 = {
|
|
.constraints = {
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply),
|
|
.consumer_supplies = ldp_vmmc1_supply,
|
|
};
|
|
|
|
/* ads7846 on SPI */
|
|
static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
|
|
REGULATOR_SUPPLY("vcc", "spi1.0"),
|
|
};
|
|
|
|
/* VAUX1 */
|
|
static struct regulator_init_data ldp_vaux1 = {
|
|
.constraints = {
|
|
.min_uV = 3000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vaux1_supplies),
|
|
.consumer_supplies = ldp_vaux1_supplies,
|
|
};
|
|
|
|
static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
|
|
};
|
|
|
|
static struct regulator_init_data ldp_vpll2 = {
|
|
.constraints = {
|
|
.name = "VDVI",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies),
|
|
.consumer_supplies = ldp_vpll2_supplies,
|
|
};
|
|
|
|
static struct twl4030_platform_data ldp_twldata = {
|
|
/* platform_data for children goes here */
|
|
.vmmc1 = &ldp_vmmc1,
|
|
.vaux1 = &ldp_vaux1,
|
|
.vpll2 = &ldp_vpll2,
|
|
.gpio = &ldp_gpio_data,
|
|
.keypad = &ldp_kp_twl4030_data,
|
|
};
|
|
|
|
static int __init omap_i2c_init(void)
|
|
{
|
|
omap3_pmic_get_config(&ldp_twldata,
|
|
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
|
|
omap3_pmic_init("twl4030", &ldp_twldata);
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
static struct omap2_hsmmc_info mmc[] __initdata = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct platform_device *ldp_devices[] __initdata = {
|
|
&ldp_gpio_keys_device,
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
#endif
|
|
|
|
static struct mtd_partition ldp_nand_partitions[] = {
|
|
/* All the partition sizes are listed in terms of NAND block size */
|
|
{
|
|
.name = "X-Loader-NAND",
|
|
.offset = 0,
|
|
.size = 4 * (64 * 2048), /* 512KB, 0x80000 */
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "U-Boot-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
|
|
.size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "Boot Env-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
|
|
.size = 2 * (64 * 2048), /* 256KB, 0x40000 */
|
|
},
|
|
{
|
|
.name = "Kernel-NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/
|
|
.size = 240 * (64 * 2048), /* 30M, 0x1E00000 */
|
|
},
|
|
{
|
|
.name = "File System - NAND",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */
|
|
.size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */
|
|
},
|
|
|
|
};
|
|
|
|
static struct regulator_consumer_supply dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
|
|
};
|
|
|
|
static void __init omap_ldp_init(void)
|
|
{
|
|
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
|
ldp_init_smsc911x();
|
|
omap_i2c_init();
|
|
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
|
|
omap_ads7846_init(1, 54, 310, NULL);
|
|
omap_serial_init();
|
|
omap_sdrc_init(NULL, NULL);
|
|
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
|
|
usb_musb_init(NULL);
|
|
board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
|
|
0, 0, nand_default_timings);
|
|
|
|
omap_hsmmc_init(mmc);
|
|
ldp_display_init();
|
|
}
|
|
|
|
MACHINE_START(OMAP_LDP, "OMAP LDP board")
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = omap3430_init_early,
|
|
.init_irq = omap3_init_irq,
|
|
.handle_irq = omap3_intc_handle_irq,
|
|
.init_machine = omap_ldp_init,
|
|
.init_late = omap3430_init_late,
|
|
.init_time = omap3_sync32k_timer_init,
|
|
.restart = omap3xxx_restart,
|
|
MACHINE_END
|