mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 12:37:59 +07:00
71dc98becc
The separation the lmedm04 fails on the ts2020 portion because the correct I2C addressing. So, it's time to correct the addressing in the remainder of lmedm04. Tested all tuners. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
1378 lines
31 KiB
C
1378 lines
31 KiB
C
/* DVB USB compliant linux driver for
|
|
*
|
|
* DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
|
|
* LME2510C + LG TDQY-P001F
|
|
* LME2510C + BS2F7HZ0194
|
|
* LME2510 + LG TDQY-P001F
|
|
* LME2510 + BS2F7HZ0194
|
|
*
|
|
* MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
|
|
* SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
|
|
*
|
|
* MV001F (LME2510+LGTDQY-P001F)
|
|
* LG TDQY - P001F =(TDA8263 + TDA10086H)
|
|
*
|
|
* MVB0001F (LME2510C+LGTDQT-P001F)
|
|
*
|
|
* MV0194 (LME2510+SHARP:BS2F7HZ0194)
|
|
* SHARP:BS2F7HZ0194 = (STV0299+IX2410)
|
|
*
|
|
* MVB0194 (LME2510C+SHARP0194)
|
|
*
|
|
* LME2510C + M88RS2000
|
|
*
|
|
* For firmware see Documentation/dvb/lmedm04.txt
|
|
*
|
|
* I2C addresses:
|
|
* 0xd0 - STV0288 - Demodulator
|
|
* 0xc0 - Sharp IX2505V - Tuner
|
|
* --
|
|
* 0x1c - TDA10086 - Demodulator
|
|
* 0xc0 - TDA8263 - Tuner
|
|
* --
|
|
* 0xd0 - STV0299 - Demodulator
|
|
* 0xc0 - IX2410 - Tuner
|
|
*
|
|
*
|
|
* VID = 3344 PID LME2510=1122 LME2510C=1120
|
|
*
|
|
* Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
|
|
* LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License Version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* see Documentation/dvb/README.dvb-usb for more information
|
|
*
|
|
* Known Issues :
|
|
* LME2510: Non Intel USB chipsets fail to maintain High Speed on
|
|
* Boot or Hot Plug.
|
|
*
|
|
* QQbox suffers from noise on LNB voltage.
|
|
*
|
|
* LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system
|
|
* with other tuners. After a cold reset streaming will not start.
|
|
*
|
|
* M88RS2000 suffers from loss of lock.
|
|
*/
|
|
#define DVB_USB_LOG_PREFIX "LME2510(C)"
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/input.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#include "dvb_usb.h"
|
|
#include "lmedm04.h"
|
|
#include "tda826x.h"
|
|
#include "tda10086.h"
|
|
#include "stv0288.h"
|
|
#include "ix2505v.h"
|
|
#include "stv0299.h"
|
|
#include "dvb-pll.h"
|
|
#include "z0194a.h"
|
|
#include "m88rs2000.h"
|
|
#include "ts2020.h"
|
|
|
|
|
|
#define LME2510_C_S7395 "dvb-usb-lme2510c-s7395.fw";
|
|
#define LME2510_C_LG "dvb-usb-lme2510c-lg.fw";
|
|
#define LME2510_C_S0194 "dvb-usb-lme2510c-s0194.fw";
|
|
#define LME2510_C_RS2000 "dvb-usb-lme2510c-rs2000.fw";
|
|
#define LME2510_LG "dvb-usb-lme2510-lg.fw";
|
|
#define LME2510_S0194 "dvb-usb-lme2510-s0194.fw";
|
|
|
|
/* debug */
|
|
static int dvb_usb_lme2510_debug;
|
|
#define lme_debug(var, level, args...) do { \
|
|
if ((var >= level)) \
|
|
pr_debug(DVB_USB_LOG_PREFIX": " args); \
|
|
} while (0)
|
|
#define deb_info(level, args...) lme_debug(dvb_usb_lme2510_debug, level, args)
|
|
#define debug_data_snipet(level, name, p) \
|
|
deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
|
|
*p, *(p+1), *(p+2), *(p+3), *(p+4), \
|
|
*(p+5), *(p+6), *(p+7));
|
|
#define info(args...) pr_info(DVB_USB_LOG_PREFIX": "args)
|
|
|
|
module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
|
|
|
|
static int dvb_usb_lme2510_firmware;
|
|
module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
|
|
MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");
|
|
|
|
static int pid_filter;
|
|
module_param_named(pid, pid_filter, int, 0644);
|
|
MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on");
|
|
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
#define TUNER_DEFAULT 0x0
|
|
#define TUNER_LG 0x1
|
|
#define TUNER_S7395 0x2
|
|
#define TUNER_S0194 0x3
|
|
#define TUNER_RS2000 0x4
|
|
|
|
struct lme2510_state {
|
|
u8 id;
|
|
u8 tuner_config;
|
|
u8 signal_lock;
|
|
u8 signal_level;
|
|
u8 signal_sn;
|
|
u8 time_key;
|
|
u8 last_key;
|
|
u8 key_timeout;
|
|
u8 i2c_talk_onoff;
|
|
u8 i2c_gate;
|
|
u8 i2c_tuner_gate_w;
|
|
u8 i2c_tuner_gate_r;
|
|
u8 i2c_tuner_addr;
|
|
u8 stream_on;
|
|
u8 pid_size;
|
|
u8 pid_off;
|
|
void *buffer;
|
|
struct urb *lme_urb;
|
|
void *usb_buffer;
|
|
int (*fe_set_voltage)(struct dvb_frontend *, fe_sec_voltage_t);
|
|
u8 dvb_usb_lme2510_firmware;
|
|
};
|
|
|
|
static int lme2510_bulk_write(struct usb_device *dev,
|
|
u8 *snd, int len, u8 pipe)
|
|
{
|
|
int ret, actual_l;
|
|
|
|
ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
|
|
snd, len , &actual_l, 100);
|
|
return ret;
|
|
}
|
|
|
|
static int lme2510_bulk_read(struct usb_device *dev,
|
|
u8 *rev, int len, u8 pipe)
|
|
{
|
|
int ret, actual_l;
|
|
|
|
ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
|
|
rev, len , &actual_l, 200);
|
|
return ret;
|
|
}
|
|
|
|
static int lme2510_usb_talk(struct dvb_usb_device *d,
|
|
u8 *wbuf, int wlen, u8 *rbuf, int rlen)
|
|
{
|
|
struct lme2510_state *st = d->priv;
|
|
u8 *buff;
|
|
int ret = 0;
|
|
|
|
if (st->usb_buffer == NULL) {
|
|
st->usb_buffer = kmalloc(64, GFP_KERNEL);
|
|
if (st->usb_buffer == NULL) {
|
|
info("MEM Error no memory");
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
buff = st->usb_buffer;
|
|
|
|
ret = mutex_lock_interruptible(&d->usb_mutex);
|
|
|
|
if (ret < 0)
|
|
return -EAGAIN;
|
|
|
|
/* the read/write capped at 64 */
|
|
memcpy(buff, wbuf, (wlen < 64) ? wlen : 64);
|
|
|
|
ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
|
|
|
|
ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ?
|
|
rlen : 64 , 0x01);
|
|
|
|
if (rlen > 0)
|
|
memcpy(rbuf, buff, rlen);
|
|
|
|
mutex_unlock(&d->usb_mutex);
|
|
|
|
return (ret < 0) ? -ENODEV : 0;
|
|
}
|
|
|
|
static int lme2510_stream_restart(struct dvb_usb_device *d)
|
|
{
|
|
struct lme2510_state *st = d->priv;
|
|
u8 all_pids[] = LME_ALL_PIDS;
|
|
u8 stream_on[] = LME_ST_ON_W;
|
|
int ret;
|
|
u8 rbuff[1];
|
|
if (st->pid_off)
|
|
ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids),
|
|
rbuff, sizeof(rbuff));
|
|
/*Restart Stream Command*/
|
|
ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
|
|
rbuff, sizeof(rbuff));
|
|
return ret;
|
|
}
|
|
|
|
static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
|
|
{
|
|
struct lme2510_state *st = d->priv;
|
|
static u8 pid_buff[] = LME_ZERO_PID;
|
|
static u8 rbuf[1];
|
|
u8 pid_no = index * 2;
|
|
u8 pid_len = pid_no + 2;
|
|
int ret = 0;
|
|
deb_info(1, "PID Setting Pid %04x", pid_out);
|
|
|
|
if (st->pid_size == 0)
|
|
ret |= lme2510_stream_restart(d);
|
|
|
|
pid_buff[2] = pid_no;
|
|
pid_buff[3] = (u8)pid_out & 0xff;
|
|
pid_buff[4] = pid_no + 1;
|
|
pid_buff[5] = (u8)(pid_out >> 8);
|
|
|
|
if (pid_len > st->pid_size)
|
|
st->pid_size = pid_len;
|
|
pid_buff[7] = 0x80 + st->pid_size;
|
|
|
|
ret |= lme2510_usb_talk(d, pid_buff ,
|
|
sizeof(pid_buff) , rbuf, sizeof(rbuf));
|
|
|
|
if (st->stream_on)
|
|
ret |= lme2510_stream_restart(d);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void lme2510_int_response(struct urb *lme_urb)
|
|
{
|
|
struct dvb_usb_adapter *adap = lme_urb->context;
|
|
struct lme2510_state *st = adap_to_priv(adap);
|
|
static u8 *ibuf, *rbuf;
|
|
int i = 0, offset;
|
|
u32 key;
|
|
|
|
switch (lme_urb->status) {
|
|
case 0:
|
|
case -ETIMEDOUT:
|
|
break;
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
default:
|
|
info("Error %x", lme_urb->status);
|
|
break;
|
|
}
|
|
|
|
rbuf = (u8 *) lme_urb->transfer_buffer;
|
|
|
|
offset = ((lme_urb->actual_length/8) > 4)
|
|
? 4 : (lme_urb->actual_length/8) ;
|
|
|
|
for (i = 0; i < offset; ++i) {
|
|
ibuf = (u8 *)&rbuf[i*8];
|
|
deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
|
|
offset, i, ibuf[0], ibuf[1]);
|
|
|
|
switch (ibuf[0]) {
|
|
case 0xaa:
|
|
debug_data_snipet(1, "INT Remote data snipet", ibuf);
|
|
if ((ibuf[4] + ibuf[5]) == 0xff) {
|
|
key = ibuf[5];
|
|
key += (ibuf[3] > 0)
|
|
? (ibuf[3] ^ 0xff) << 8 : 0;
|
|
key += (ibuf[2] ^ 0xff) << 16;
|
|
deb_info(1, "INT Key =%08x", key);
|
|
if (adap_to_d(adap)->rc_dev != NULL)
|
|
rc_keydown(adap_to_d(adap)->rc_dev,
|
|
key, 0);
|
|
}
|
|
break;
|
|
case 0xbb:
|
|
switch (st->tuner_config) {
|
|
case TUNER_LG:
|
|
if (ibuf[2] > 0)
|
|
st->signal_lock = ibuf[2];
|
|
st->signal_level = ibuf[4];
|
|
st->signal_sn = ibuf[3];
|
|
st->time_key = ibuf[7];
|
|
break;
|
|
case TUNER_S7395:
|
|
case TUNER_S0194:
|
|
/* Tweak for earlier firmware*/
|
|
if (ibuf[1] == 0x03) {
|
|
if (ibuf[2] > 1)
|
|
st->signal_lock = ibuf[2];
|
|
st->signal_level = ibuf[3];
|
|
st->signal_sn = ibuf[4];
|
|
} else {
|
|
st->signal_level = ibuf[4];
|
|
st->signal_sn = ibuf[5];
|
|
st->signal_lock =
|
|
(st->signal_lock & 0xf7) +
|
|
((ibuf[2] & 0x01) << 0x03);
|
|
}
|
|
break;
|
|
case TUNER_RS2000:
|
|
if (ibuf[1] == 0x3 && ibuf[6] == 0xff)
|
|
st->signal_lock = 0xff;
|
|
else
|
|
st->signal_lock = 0x00;
|
|
st->signal_level = ibuf[5];
|
|
st->signal_sn = ibuf[4];
|
|
st->time_key = ibuf[7];
|
|
default:
|
|
break;
|
|
}
|
|
debug_data_snipet(5, "INT Remote data snipet in", ibuf);
|
|
break;
|
|
case 0xcc:
|
|
debug_data_snipet(1, "INT Control data snipet", ibuf);
|
|
break;
|
|
default:
|
|
debug_data_snipet(1, "INT Unknown data snipet", ibuf);
|
|
break;
|
|
}
|
|
}
|
|
usb_submit_urb(lme_urb, GFP_ATOMIC);
|
|
}
|
|
|
|
static int lme2510_int_read(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
struct lme2510_state *lme_int = adap_to_priv(adap);
|
|
|
|
lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
|
|
if (lme_int->lme_urb == NULL)
|
|
return -ENOMEM;
|
|
|
|
lme_int->buffer = usb_alloc_coherent(d->udev, 128, GFP_ATOMIC,
|
|
&lme_int->lme_urb->transfer_dma);
|
|
|
|
if (lme_int->buffer == NULL)
|
|
return -ENOMEM;
|
|
|
|
usb_fill_int_urb(lme_int->lme_urb,
|
|
d->udev,
|
|
usb_rcvintpipe(d->udev, 0xa),
|
|
lme_int->buffer,
|
|
128,
|
|
lme2510_int_response,
|
|
adap,
|
|
8);
|
|
|
|
lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
|
|
info("INT Interrupt Service Started");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
struct lme2510_state *st = adap_to_priv(adap);
|
|
static u8 clear_pid_reg[] = LME_ALL_PIDS;
|
|
static u8 rbuf[1];
|
|
int ret = 0;
|
|
|
|
deb_info(1, "PID Clearing Filter");
|
|
|
|
mutex_lock(&d->i2c_mutex);
|
|
|
|
if (!onoff) {
|
|
ret |= lme2510_usb_talk(d, clear_pid_reg,
|
|
sizeof(clear_pid_reg), rbuf, sizeof(rbuf));
|
|
st->pid_off = true;
|
|
} else
|
|
st->pid_off = false;
|
|
|
|
st->pid_size = 0;
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
|
|
int onoff)
|
|
{
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
int ret = 0;
|
|
|
|
deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__,
|
|
pid, index, onoff);
|
|
|
|
if (onoff) {
|
|
mutex_lock(&d->i2c_mutex);
|
|
ret |= lme2510_enable_pid(d, index, pid);
|
|
mutex_unlock(&d->i2c_mutex);
|
|
}
|
|
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int lme2510_return_status(struct dvb_usb_device *d)
|
|
{
|
|
int ret = 0;
|
|
u8 *data;
|
|
|
|
data = kzalloc(10, GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
|
|
0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
|
|
info("Firmware Status: %x (%x)", ret , data[2]);
|
|
|
|
ret = (ret < 0) ? -ENODEV : data[2];
|
|
kfree(data);
|
|
return ret;
|
|
}
|
|
|
|
static int lme2510_msg(struct dvb_usb_device *d,
|
|
u8 *wbuf, int wlen, u8 *rbuf, int rlen)
|
|
{
|
|
int ret = 0;
|
|
struct lme2510_state *st = d->priv;
|
|
|
|
if (st->i2c_talk_onoff == 1) {
|
|
|
|
ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
|
|
|
|
switch (st->tuner_config) {
|
|
case TUNER_LG:
|
|
if (wbuf[2] == 0x1c) {
|
|
if (wbuf[3] == 0x0e) {
|
|
st->signal_lock = rbuf[1];
|
|
if ((st->stream_on & 1) &&
|
|
(st->signal_lock & 0x10)) {
|
|
lme2510_stream_restart(d);
|
|
st->i2c_talk_onoff = 0;
|
|
}
|
|
msleep(80);
|
|
}
|
|
}
|
|
break;
|
|
case TUNER_S7395:
|
|
if (wbuf[2] == 0xd0) {
|
|
if (wbuf[3] == 0x24) {
|
|
st->signal_lock = rbuf[1];
|
|
if ((st->stream_on & 1) &&
|
|
(st->signal_lock & 0x8)) {
|
|
lme2510_stream_restart(d);
|
|
st->i2c_talk_onoff = 0;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case TUNER_S0194:
|
|
if (wbuf[2] == 0xd0) {
|
|
if (wbuf[3] == 0x1b) {
|
|
st->signal_lock = rbuf[1];
|
|
if ((st->stream_on & 1) &&
|
|
(st->signal_lock & 0x8)) {
|
|
lme2510_stream_restart(d);
|
|
st->i2c_talk_onoff = 0;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case TUNER_RS2000:
|
|
default:
|
|
break;
|
|
}
|
|
} else {
|
|
/* TODO rewrite this section */
|
|
switch (st->tuner_config) {
|
|
case TUNER_LG:
|
|
switch (wbuf[3]) {
|
|
case 0x0e:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = st->signal_lock;
|
|
break;
|
|
case 0x43:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = st->signal_level;
|
|
break;
|
|
case 0x1c:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = st->signal_sn;
|
|
break;
|
|
case 0x15:
|
|
case 0x16:
|
|
case 0x17:
|
|
case 0x18:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = 0x00;
|
|
break;
|
|
default:
|
|
lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
|
|
st->i2c_talk_onoff = 1;
|
|
break;
|
|
}
|
|
break;
|
|
case TUNER_S7395:
|
|
switch (wbuf[3]) {
|
|
case 0x10:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = (st->signal_level & 0x80)
|
|
? 0 : (st->signal_level * 2);
|
|
break;
|
|
case 0x2d:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = st->signal_sn;
|
|
break;
|
|
case 0x24:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = st->signal_lock;
|
|
break;
|
|
case 0x2e:
|
|
case 0x26:
|
|
case 0x27:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = 0x00;
|
|
break;
|
|
default:
|
|
lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
|
|
st->i2c_talk_onoff = 1;
|
|
break;
|
|
}
|
|
break;
|
|
case TUNER_S0194:
|
|
switch (wbuf[3]) {
|
|
case 0x18:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = (st->signal_level & 0x80)
|
|
? 0 : (st->signal_level * 2);
|
|
break;
|
|
case 0x24:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = st->signal_sn;
|
|
break;
|
|
case 0x1b:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = st->signal_lock;
|
|
break;
|
|
case 0x19:
|
|
case 0x25:
|
|
case 0x1e:
|
|
case 0x1d:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = 0x00;
|
|
break;
|
|
default:
|
|
lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
|
|
st->i2c_talk_onoff = 1;
|
|
break;
|
|
}
|
|
break;
|
|
case TUNER_RS2000:
|
|
switch (wbuf[3]) {
|
|
case 0x8c:
|
|
rbuf[0] = 0x55;
|
|
rbuf[1] = 0xff;
|
|
if (st->last_key == st->time_key) {
|
|
st->key_timeout++;
|
|
if (st->key_timeout > 5)
|
|
rbuf[1] = 0;
|
|
} else
|
|
st->key_timeout = 0;
|
|
st->last_key = st->time_key;
|
|
break;
|
|
default:
|
|
lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
|
|
st->i2c_talk_onoff = 1;
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
|
|
deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)",
|
|
wbuf[3], rbuf[1]);
|
|
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
|
|
int num)
|
|
{
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
|
struct lme2510_state *st = d->priv;
|
|
static u8 obuf[64], ibuf[64];
|
|
int i, read, read_o;
|
|
u16 len;
|
|
u8 gate = st->i2c_gate;
|
|
|
|
mutex_lock(&d->i2c_mutex);
|
|
|
|
if (gate == 0)
|
|
gate = 5;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
read_o = msg[i].flags & I2C_M_RD;
|
|
read = i + 1 < num && msg[i + 1].flags & I2C_M_RD;
|
|
read |= read_o;
|
|
gate = (msg[i].addr == st->i2c_tuner_addr)
|
|
? (read) ? st->i2c_tuner_gate_r
|
|
: st->i2c_tuner_gate_w
|
|
: st->i2c_gate;
|
|
obuf[0] = gate | (read << 7);
|
|
|
|
if (gate == 5)
|
|
obuf[1] = (read) ? 2 : msg[i].len + 1;
|
|
else
|
|
obuf[1] = msg[i].len + read + 1;
|
|
|
|
obuf[2] = msg[i].addr << 1;
|
|
|
|
if (read) {
|
|
if (read_o)
|
|
len = 3;
|
|
else {
|
|
memcpy(&obuf[3], msg[i].buf, msg[i].len);
|
|
obuf[msg[i].len+3] = msg[i+1].len;
|
|
len = msg[i].len+4;
|
|
}
|
|
} else {
|
|
memcpy(&obuf[3], msg[i].buf, msg[i].len);
|
|
len = msg[i].len+3;
|
|
}
|
|
|
|
if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) {
|
|
deb_info(1, "i2c transfer failed.");
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (read) {
|
|
if (read_o)
|
|
memcpy(msg[i].buf, &ibuf[1], msg[i].len);
|
|
else {
|
|
memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
|
|
i++;
|
|
}
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
return i;
|
|
}
|
|
|
|
static u32 lme2510_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C;
|
|
}
|
|
|
|
static struct i2c_algorithm lme2510_i2c_algo = {
|
|
.master_xfer = lme2510_i2c_xfer,
|
|
.functionality = lme2510_i2c_func,
|
|
};
|
|
|
|
static int lme2510_streaming_ctrl(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe_to_adap(fe);
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
struct lme2510_state *st = adap_to_priv(adap);
|
|
static u8 clear_reg_3[] = LME_ALL_PIDS;
|
|
static u8 rbuf[1];
|
|
int ret = 0, rlen = sizeof(rbuf);
|
|
|
|
deb_info(1, "STM (%02x)", onoff);
|
|
|
|
/* Streaming is started by FE_HAS_LOCK */
|
|
if (onoff == 1)
|
|
st->stream_on = 1;
|
|
else {
|
|
deb_info(1, "STM Steam Off");
|
|
/* mutex is here only to avoid collision with I2C */
|
|
mutex_lock(&d->i2c_mutex);
|
|
|
|
ret = lme2510_usb_talk(d, clear_reg_3,
|
|
sizeof(clear_reg_3), rbuf, rlen);
|
|
st->stream_on = 0;
|
|
st->i2c_talk_onoff = 1;
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
}
|
|
|
|
return (ret < 0) ? -ENODEV : 0;
|
|
}
|
|
|
|
static u8 check_sum(u8 *p, u8 len)
|
|
{
|
|
u8 sum = 0;
|
|
while (len--)
|
|
sum += *p++;
|
|
return sum;
|
|
}
|
|
|
|
static int lme2510_download_firmware(struct dvb_usb_device *d,
|
|
const struct firmware *fw)
|
|
{
|
|
int ret = 0;
|
|
u8 *data;
|
|
u16 j, wlen, len_in, start, end;
|
|
u8 packet_size, dlen, i;
|
|
u8 *fw_data;
|
|
|
|
packet_size = 0x31;
|
|
len_in = 1;
|
|
|
|
data = kzalloc(128, GFP_KERNEL);
|
|
if (!data) {
|
|
info("FRM Could not start Firmware Download"\
|
|
"(Buffer allocation failed)");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info("FRM Starting Firmware Download");
|
|
|
|
for (i = 1; i < 3; i++) {
|
|
start = (i == 1) ? 0 : 512;
|
|
end = (i == 1) ? 512 : fw->size;
|
|
for (j = start; j < end; j += (packet_size+1)) {
|
|
fw_data = (u8 *)(fw->data + j);
|
|
if ((end - j) > packet_size) {
|
|
data[0] = i;
|
|
dlen = packet_size;
|
|
} else {
|
|
data[0] = i | 0x80;
|
|
dlen = (u8)(end - j)-1;
|
|
}
|
|
data[1] = dlen;
|
|
memcpy(&data[2], fw_data, dlen+1);
|
|
wlen = (u8) dlen + 4;
|
|
data[wlen-1] = check_sum(fw_data, dlen+1);
|
|
deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
|
|
data[dlen+2], data[dlen+3]);
|
|
lme2510_usb_talk(d, data, wlen, data, len_in);
|
|
ret |= (data[0] == 0x88) ? 0 : -1;
|
|
}
|
|
}
|
|
|
|
data[0] = 0x8a;
|
|
len_in = 1;
|
|
msleep(2000);
|
|
lme2510_usb_talk(d, data, len_in, data, len_in);
|
|
msleep(400);
|
|
|
|
if (ret < 0)
|
|
info("FRM Firmware Download Failed (%04x)" , ret);
|
|
else
|
|
info("FRM Firmware Download Completed - Resetting Device");
|
|
|
|
kfree(data);
|
|
return RECONNECTS_USB;
|
|
}
|
|
|
|
static void lme_coldreset(struct dvb_usb_device *d)
|
|
{
|
|
u8 data[1] = {0};
|
|
data[0] = 0x0a;
|
|
info("FRM Firmware Cold Reset");
|
|
|
|
lme2510_usb_talk(d, data, sizeof(data), data, sizeof(data));
|
|
|
|
return;
|
|
}
|
|
|
|
static const char fw_c_s7395[] = LME2510_C_S7395;
|
|
static const char fw_c_lg[] = LME2510_C_LG;
|
|
static const char fw_c_s0194[] = LME2510_C_S0194;
|
|
static const char fw_c_rs2000[] = LME2510_C_RS2000;
|
|
static const char fw_lg[] = LME2510_LG;
|
|
static const char fw_s0194[] = LME2510_S0194;
|
|
|
|
static const char *lme_firmware_switch(struct dvb_usb_device *d, int cold)
|
|
{
|
|
struct lme2510_state *st = d->priv;
|
|
struct usb_device *udev = d->udev;
|
|
const struct firmware *fw = NULL;
|
|
const char *fw_lme;
|
|
int ret = 0;
|
|
|
|
cold = (cold > 0) ? (cold & 1) : 0;
|
|
|
|
switch (le16_to_cpu(udev->descriptor.idProduct)) {
|
|
case 0x1122:
|
|
switch (st->dvb_usb_lme2510_firmware) {
|
|
default:
|
|
st->dvb_usb_lme2510_firmware = TUNER_S0194;
|
|
case TUNER_S0194:
|
|
fw_lme = fw_s0194;
|
|
ret = request_firmware(&fw, fw_lme, &udev->dev);
|
|
if (ret == 0) {
|
|
cold = 0;
|
|
break;
|
|
}
|
|
st->dvb_usb_lme2510_firmware = TUNER_LG;
|
|
case TUNER_LG:
|
|
fw_lme = fw_lg;
|
|
ret = request_firmware(&fw, fw_lme, &udev->dev);
|
|
if (ret == 0)
|
|
break;
|
|
st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
|
|
break;
|
|
}
|
|
break;
|
|
case 0x1120:
|
|
switch (st->dvb_usb_lme2510_firmware) {
|
|
default:
|
|
st->dvb_usb_lme2510_firmware = TUNER_S7395;
|
|
case TUNER_S7395:
|
|
fw_lme = fw_c_s7395;
|
|
ret = request_firmware(&fw, fw_lme, &udev->dev);
|
|
if (ret == 0) {
|
|
cold = 0;
|
|
break;
|
|
}
|
|
st->dvb_usb_lme2510_firmware = TUNER_LG;
|
|
case TUNER_LG:
|
|
fw_lme = fw_c_lg;
|
|
ret = request_firmware(&fw, fw_lme, &udev->dev);
|
|
if (ret == 0)
|
|
break;
|
|
st->dvb_usb_lme2510_firmware = TUNER_S0194;
|
|
case TUNER_S0194:
|
|
fw_lme = fw_c_s0194;
|
|
ret = request_firmware(&fw, fw_lme, &udev->dev);
|
|
if (ret == 0)
|
|
break;
|
|
st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
|
|
cold = 0;
|
|
break;
|
|
}
|
|
break;
|
|
case 0x22f0:
|
|
fw_lme = fw_c_rs2000;
|
|
st->dvb_usb_lme2510_firmware = TUNER_RS2000;
|
|
break;
|
|
default:
|
|
fw_lme = fw_c_s7395;
|
|
}
|
|
|
|
release_firmware(fw);
|
|
|
|
if (cold) {
|
|
dvb_usb_lme2510_firmware = st->dvb_usb_lme2510_firmware;
|
|
info("FRM Changing to %s firmware", fw_lme);
|
|
lme_coldreset(d);
|
|
return NULL;
|
|
}
|
|
|
|
return fw_lme;
|
|
}
|
|
|
|
static int lme2510_kill_urb(struct usb_data_stream *stream)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < stream->urbs_submitted; i++) {
|
|
deb_info(3, "killing URB no. %d.", i);
|
|
/* stop the URB */
|
|
usb_kill_urb(stream->urb_list[i]);
|
|
}
|
|
stream->urbs_submitted = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct tda10086_config tda10086_config = {
|
|
.demod_address = 0x0e,
|
|
.invert = 0,
|
|
.diseqc_tone = 1,
|
|
.xtal_freq = TDA10086_XTAL_16M,
|
|
};
|
|
|
|
static struct stv0288_config lme_config = {
|
|
.demod_address = 0x68,
|
|
.min_delay_ms = 15,
|
|
.inittab = s7395_inittab,
|
|
};
|
|
|
|
static struct ix2505v_config lme_tuner = {
|
|
.tuner_address = 0x60,
|
|
.min_delay_ms = 100,
|
|
.tuner_gain = 0x0,
|
|
.tuner_chargepump = 0x3,
|
|
};
|
|
|
|
static struct stv0299_config sharp_z0194_config = {
|
|
.demod_address = 0x68,
|
|
.inittab = sharp_z0194a_inittab,
|
|
.mclk = 88000000UL,
|
|
.invert = 0,
|
|
.skip_reinit = 0,
|
|
.lock_output = STV0299_LOCKOUTPUT_1,
|
|
.volt13_op0_op1 = STV0299_VOLT13_OP1,
|
|
.min_delay_ms = 100,
|
|
.set_symbol_rate = sharp_z0194a_set_symbol_rate,
|
|
};
|
|
|
|
static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe,
|
|
int caller)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe_to_adap(fe);
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
struct lme2510_state *st = d->priv;
|
|
|
|
mutex_lock(&d->i2c_mutex);
|
|
if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) {
|
|
st->i2c_talk_onoff = 0;
|
|
lme2510_stream_restart(d);
|
|
}
|
|
mutex_unlock(&d->i2c_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct m88rs2000_config m88rs2000_config = {
|
|
.demod_addr = 0x68,
|
|
.set_ts_params = dm04_rs2000_set_ts_param,
|
|
};
|
|
|
|
static struct ts2020_config ts2020_config = {
|
|
.tuner_address = 0x60,
|
|
.clk_out_div = 7,
|
|
};
|
|
|
|
static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
|
|
fe_sec_voltage_t voltage)
|
|
{
|
|
struct dvb_usb_device *d = fe_to_d(fe);
|
|
struct lme2510_state *st = fe_to_priv(fe);
|
|
static u8 voltage_low[] = LME_VOLTAGE_L;
|
|
static u8 voltage_high[] = LME_VOLTAGE_H;
|
|
static u8 rbuf[1];
|
|
int ret = 0, len = 3, rlen = 1;
|
|
|
|
mutex_lock(&d->i2c_mutex);
|
|
|
|
switch (voltage) {
|
|
case SEC_VOLTAGE_18:
|
|
ret |= lme2510_usb_talk(d,
|
|
voltage_high, len, rbuf, rlen);
|
|
break;
|
|
|
|
case SEC_VOLTAGE_OFF:
|
|
case SEC_VOLTAGE_13:
|
|
default:
|
|
ret |= lme2510_usb_talk(d,
|
|
voltage_low, len, rbuf, rlen);
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
|
|
if (st->tuner_config == TUNER_RS2000)
|
|
if (st->fe_set_voltage)
|
|
st->fe_set_voltage(fe, voltage);
|
|
|
|
|
|
return (ret < 0) ? -ENODEV : 0;
|
|
}
|
|
|
|
static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe,
|
|
u16 *strength)
|
|
{
|
|
struct lme2510_state *st = fe_to_priv(fe);
|
|
|
|
*strength = (u16)((u32)st->signal_level * 0xffff / 0xff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct lme2510_state *st = fe_to_priv(fe);
|
|
|
|
*snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
*ber = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm04_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
|
|
{
|
|
*ucblocks = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lme_name(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
struct lme2510_state *st = adap_to_priv(adap);
|
|
const char *desc = d->name;
|
|
char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395",
|
|
" SHARP:BS2F7HZ0194", " RS2000"};
|
|
char *name = adap->fe[0]->ops.info.name;
|
|
|
|
strlcpy(name, desc, 128);
|
|
strlcat(name, fe_name[st->tuner_config], 128);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
struct lme2510_state *st = d->priv;
|
|
int ret = 0;
|
|
|
|
st->i2c_talk_onoff = 1;
|
|
switch (le16_to_cpu(d->udev->descriptor.idProduct)) {
|
|
case 0x1122:
|
|
case 0x1120:
|
|
st->i2c_gate = 4;
|
|
adap->fe[0] = dvb_attach(tda10086_attach,
|
|
&tda10086_config, &d->i2c_adap);
|
|
if (adap->fe[0]) {
|
|
info("TUN Found Frontend TDA10086");
|
|
st->i2c_tuner_gate_w = 4;
|
|
st->i2c_tuner_gate_r = 4;
|
|
st->i2c_tuner_addr = 0x60;
|
|
st->tuner_config = TUNER_LG;
|
|
if (st->dvb_usb_lme2510_firmware != TUNER_LG) {
|
|
st->dvb_usb_lme2510_firmware = TUNER_LG;
|
|
ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
|
|
}
|
|
break;
|
|
}
|
|
|
|
st->i2c_gate = 4;
|
|
adap->fe[0] = dvb_attach(stv0299_attach,
|
|
&sharp_z0194_config, &d->i2c_adap);
|
|
if (adap->fe[0]) {
|
|
info("FE Found Stv0299");
|
|
st->i2c_tuner_gate_w = 4;
|
|
st->i2c_tuner_gate_r = 5;
|
|
st->i2c_tuner_addr = 0x60;
|
|
st->tuner_config = TUNER_S0194;
|
|
if (st->dvb_usb_lme2510_firmware != TUNER_S0194) {
|
|
st->dvb_usb_lme2510_firmware = TUNER_S0194;
|
|
ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
|
|
}
|
|
break;
|
|
}
|
|
|
|
st->i2c_gate = 5;
|
|
adap->fe[0] = dvb_attach(stv0288_attach, &lme_config,
|
|
&d->i2c_adap);
|
|
|
|
if (adap->fe[0]) {
|
|
info("FE Found Stv0288");
|
|
st->i2c_tuner_gate_w = 4;
|
|
st->i2c_tuner_gate_r = 5;
|
|
st->i2c_tuner_addr = 0x60;
|
|
st->tuner_config = TUNER_S7395;
|
|
if (st->dvb_usb_lme2510_firmware != TUNER_S7395) {
|
|
st->dvb_usb_lme2510_firmware = TUNER_S7395;
|
|
ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
|
|
}
|
|
break;
|
|
}
|
|
case 0x22f0:
|
|
st->i2c_gate = 5;
|
|
adap->fe[0] = dvb_attach(m88rs2000_attach,
|
|
&m88rs2000_config, &d->i2c_adap);
|
|
|
|
if (adap->fe[0]) {
|
|
info("FE Found M88RS2000");
|
|
dvb_attach(ts2020_attach, adap->fe[0], &ts2020_config,
|
|
&d->i2c_adap);
|
|
st->i2c_tuner_gate_w = 5;
|
|
st->i2c_tuner_gate_r = 5;
|
|
st->i2c_tuner_addr = 0x60;
|
|
st->tuner_config = TUNER_RS2000;
|
|
st->fe_set_voltage =
|
|
adap->fe[0]->ops.set_voltage;
|
|
|
|
adap->fe[0]->ops.read_signal_strength =
|
|
dm04_rs2000_read_signal_strength;
|
|
adap->fe[0]->ops.read_snr =
|
|
dm04_rs2000_read_snr;
|
|
adap->fe[0]->ops.read_ber =
|
|
dm04_read_ber;
|
|
adap->fe[0]->ops.read_ucblocks =
|
|
dm04_read_ucblocks;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (adap->fe[0] == NULL) {
|
|
info("DM04/QQBOX Not Powered up or not Supported");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (ret) {
|
|
if (adap->fe[0]) {
|
|
dvb_frontend_detach(adap->fe[0]);
|
|
adap->fe[0] = NULL;
|
|
}
|
|
d->rc_map = NULL;
|
|
return -ENODEV;
|
|
}
|
|
|
|
adap->fe[0]->ops.set_voltage = dm04_lme2510_set_voltage;
|
|
ret = lme_name(adap);
|
|
return ret;
|
|
}
|
|
|
|
static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
|
|
{
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
struct lme2510_state *st = adap_to_priv(adap);
|
|
char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"};
|
|
int ret = 0;
|
|
|
|
switch (st->tuner_config) {
|
|
case TUNER_LG:
|
|
if (dvb_attach(tda826x_attach, adap->fe[0], 0x60,
|
|
&d->i2c_adap, 1))
|
|
ret = st->tuner_config;
|
|
break;
|
|
case TUNER_S7395:
|
|
if (dvb_attach(ix2505v_attach , adap->fe[0], &lme_tuner,
|
|
&d->i2c_adap))
|
|
ret = st->tuner_config;
|
|
break;
|
|
case TUNER_S0194:
|
|
if (dvb_attach(dvb_pll_attach , adap->fe[0], 0x60,
|
|
&d->i2c_adap, DVB_PLL_OPERA1))
|
|
ret = st->tuner_config;
|
|
break;
|
|
case TUNER_RS2000:
|
|
ret = st->tuner_config;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
info("TUN Found %s tuner", tun_msg[ret]);
|
|
else {
|
|
info("TUN No tuner found --- resetting device");
|
|
lme_coldreset(d);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Start the Interrupt*/
|
|
ret = lme2510_int_read(adap);
|
|
if (ret < 0) {
|
|
info("INT Unable to start Interrupt Service");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
struct lme2510_state *st = d->priv;
|
|
static u8 lnb_on[] = LNB_ON;
|
|
static u8 lnb_off[] = LNB_OFF;
|
|
static u8 rbuf[1];
|
|
int ret = 0, len = 3, rlen = 1;
|
|
|
|
mutex_lock(&d->i2c_mutex);
|
|
|
|
if (onoff)
|
|
ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
|
|
else
|
|
ret = lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
|
|
|
|
st->i2c_talk_onoff = 1;
|
|
|
|
mutex_unlock(&d->i2c_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lme2510_get_adapter_count(struct dvb_usb_device *d)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static int lme2510_identify_state(struct dvb_usb_device *d, const char **name)
|
|
{
|
|
struct lme2510_state *st = d->priv;
|
|
|
|
usb_reset_configuration(d->udev);
|
|
|
|
usb_set_interface(d->udev,
|
|
d->intf->cur_altsetting->desc.bInterfaceNumber, 1);
|
|
|
|
st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware;
|
|
|
|
if (lme2510_return_status(d) == 0x44) {
|
|
*name = lme_firmware_switch(d, 0);
|
|
return COLD;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
|
|
struct usb_data_stream_properties *stream)
|
|
{
|
|
struct dvb_usb_adapter *adap = fe_to_adap(fe);
|
|
struct dvb_usb_device *d = adap_to_d(adap);
|
|
|
|
if (adap == NULL)
|
|
return 0;
|
|
/* Turn PID filter on the fly by module option */
|
|
if (pid_filter == 2) {
|
|
adap->pid_filtering = 1;
|
|
adap->max_feed_count = 15;
|
|
}
|
|
|
|
if (!(le16_to_cpu(d->udev->descriptor.idProduct)
|
|
== 0x1122))
|
|
stream->endpoint = 0x8;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lme2510_get_rc_config(struct dvb_usb_device *d,
|
|
struct dvb_usb_rc *rc)
|
|
{
|
|
rc->allowed_protos = RC_BIT_NEC;
|
|
return 0;
|
|
}
|
|
|
|
static void *lme2510_exit_int(struct dvb_usb_device *d)
|
|
{
|
|
struct lme2510_state *st = d->priv;
|
|
struct dvb_usb_adapter *adap = &d->adapter[0];
|
|
void *buffer = NULL;
|
|
|
|
if (adap != NULL) {
|
|
lme2510_kill_urb(&adap->stream);
|
|
}
|
|
|
|
if (st->usb_buffer != NULL) {
|
|
st->i2c_talk_onoff = 1;
|
|
st->signal_lock = 0;
|
|
st->signal_level = 0;
|
|
st->signal_sn = 0;
|
|
buffer = st->usb_buffer;
|
|
}
|
|
|
|
if (st->lme_urb != NULL) {
|
|
usb_kill_urb(st->lme_urb);
|
|
usb_free_coherent(d->udev, 128, st->buffer,
|
|
st->lme_urb->transfer_dma);
|
|
info("Interrupt Service Stopped");
|
|
}
|
|
|
|
return buffer;
|
|
}
|
|
|
|
static void lme2510_exit(struct dvb_usb_device *d)
|
|
{
|
|
void *usb_buffer;
|
|
|
|
if (d != NULL) {
|
|
usb_buffer = lme2510_exit_int(d);
|
|
if (usb_buffer != NULL)
|
|
kfree(usb_buffer);
|
|
}
|
|
}
|
|
|
|
static struct dvb_usb_device_properties lme2510_props = {
|
|
.driver_name = KBUILD_MODNAME,
|
|
.owner = THIS_MODULE,
|
|
.bInterfaceNumber = 0,
|
|
.adapter_nr = adapter_nr,
|
|
.size_of_priv = sizeof(struct lme2510_state),
|
|
|
|
.download_firmware = lme2510_download_firmware,
|
|
|
|
.power_ctrl = lme2510_powerup,
|
|
.identify_state = lme2510_identify_state,
|
|
.i2c_algo = &lme2510_i2c_algo,
|
|
|
|
.frontend_attach = dm04_lme2510_frontend_attach,
|
|
.tuner_attach = dm04_lme2510_tuner,
|
|
.get_stream_config = lme2510_get_stream_config,
|
|
.get_adapter_count = lme2510_get_adapter_count,
|
|
.streaming_ctrl = lme2510_streaming_ctrl,
|
|
|
|
.get_rc_config = lme2510_get_rc_config,
|
|
|
|
.exit = lme2510_exit,
|
|
.adapter = {
|
|
{
|
|
.caps = DVB_USB_ADAP_HAS_PID_FILTER|
|
|
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
|
|
.pid_filter_count = 15,
|
|
.pid_filter = lme2510_pid_filter,
|
|
.pid_filter_ctrl = lme2510_pid_filter_ctrl,
|
|
.stream =
|
|
DVB_USB_STREAM_BULK(0x86, 10, 4096),
|
|
},
|
|
{
|
|
}
|
|
},
|
|
};
|
|
|
|
static const struct usb_device_id lme2510_id_table[] = {
|
|
{ DVB_USB_DEVICE(0x3344, 0x1122, &lme2510_props,
|
|
"DM04_LME2510_DVB-S", RC_MAP_LME2510) },
|
|
{ DVB_USB_DEVICE(0x3344, 0x1120, &lme2510_props,
|
|
"DM04_LME2510C_DVB-S", RC_MAP_LME2510) },
|
|
{ DVB_USB_DEVICE(0x3344, 0x22f0, &lme2510_props,
|
|
"DM04_LME2510C_DVB-S RS2000", RC_MAP_LME2510) },
|
|
{} /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, lme2510_id_table);
|
|
|
|
static struct usb_driver lme2510_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.probe = dvb_usbv2_probe,
|
|
.disconnect = dvb_usbv2_disconnect,
|
|
.id_table = lme2510_id_table,
|
|
.no_dynamic_id = 1,
|
|
.soft_unbind = 1,
|
|
};
|
|
|
|
module_usb_driver(lme2510_driver);
|
|
|
|
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
|
|
MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
|
|
MODULE_VERSION("2.06");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(LME2510_C_S7395);
|
|
MODULE_FIRMWARE(LME2510_C_LG);
|
|
MODULE_FIRMWARE(LME2510_C_S0194);
|
|
MODULE_FIRMWARE(LME2510_C_RS2000);
|
|
MODULE_FIRMWARE(LME2510_LG);
|
|
MODULE_FIRMWARE(LME2510_S0194);
|
|
|