linux_dsm_epyc7002/arch/arm/boot/dts/imx53-ard.dts
Shawn Guo 4bb6143cbe ARM: dts: imx53-ard: add pinctrl settings
Add pinctrl settings for the exsiting devices in imx53-ard.dts.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-11 16:26:51 +08:00

165 lines
4.7 KiB
Plaintext

/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx53.dtsi"
/ {
model = "Freescale i.MX53 Automotive Reference Design Board";
compatible = "fsl,imx53-ard", "fsl,imx53";
memory {
reg = <0x70000000 0x40000000>;
};
soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1_2>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
};
iomuxc@53fa8000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */
1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */
486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */
739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */
218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */
226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */
233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */
241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */
429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */
435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */
441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */
448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */
456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */
464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */
471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */
477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */
492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */
500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */
508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */
516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */
524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */
532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */
540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */
548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */
637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */
642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */
647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */
652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */
657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */
662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */
667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */
611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */
616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */
607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */
>;
};
};
};
uart1: serial@53fbc000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_2>;
status = "okay";
};
};
};
eim-cs1@f4000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,eim-bus", "simple-bus";
reg = <0xf4000000 0x3ff0000>;
ranges;
lan9220@f4000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio2>;
interrupts = <31 0x8>;
reg-io-width = <4>;
/*
* VDD33A and VDDVARIO of LAN9220 are supplied by
* SW4_3V3 of LTC3589. Before the regulator driver
* for this PMIC is available, we use a fixed dummy
* 3V3 regulator to get LAN9220 driver probing work.
*/
vdd33a-supply = <&reg_3p3v>;
vddvario-supply = <&reg_3p3v>;
smsc,irq-push-pull;
};
};
regulators {
compatible = "simple-bus";
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
gpio-keys {
compatible = "gpio-keys";
home {
label = "Home";
gpios = <&gpio5 10 0>;
linux,code = <102>; /* KEY_HOME */
gpio-key,wakeup;
};
back {
label = "Back";
gpios = <&gpio5 11 0>;
linux,code = <158>; /* KEY_BACK */
gpio-key,wakeup;
};
program {
label = "Program";
gpios = <&gpio5 12 0>;
linux,code = <362>; /* KEY_PROGRAM */
gpio-key,wakeup;
};
volume-up {
label = "Volume Up";
gpios = <&gpio5 13 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};
volume-down {
label = "Volume Down";
gpios = <&gpio4 0 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
};