AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
b54e16f104
linux_dsm_epyc7002/drivers/net/wireless/ath/ath10k
History
Vasanthakumar Thiagarajan b54e16f104 ath10k: fix peer assoc complete WMI command for 10.4 
There is an extra 4-byte member when compared to WMI 10.2 added to
assoc complete command in WMI 10.4. This new member is used for 160Mhz
related configuration. This WMI command mismatch between host and
firmware does not cause any real issues because this new member is not
used in 10.4 firmwares so far (10.4.1.00030-1). This difference in WMI
command interface brings in a new wmi_ops for 10.4 gen_peer_assoc().
No noticeable functionality differences with this change can be seen
with the current 10.4 firmwares, but the WMI interface has to be
fixed to work with future 10.4 firmwares which may be using this new
member.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12 21:19:13 +02:00
..
bmi.c
bmi.h ath10k: select board data based on BMI chip id and board id 2015-10-14 08:58:35 +03:00
ce.c ath10k: remove shadow copy of CE descriptors for source ring 2015-10-29 12:59:04 +02:00
ce.h ath10k: remove shadow copy of CE descriptors for source ring 2015-10-29 12:59:04 +02:00
core.c ath10k: set peer MFP flag in peer assoc command 2015-11-04 19:30:20 +02:00
core.h ath10k: debugfs file to enable Bluetooth coexistence feature 2015-11-04 19:37:32 +02:00
debug.c ath10k: debugfs file to enable Bluetooth coexistence feature 2015-11-04 19:37:32 +02:00
debug.h ath10k: make fw stats prints specific to firmware version 2015-10-19 17:42:03 +03:00
debugfs_sta.c
hif.h ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htc.c ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htc.h ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htt_rx.c ath10k: add support for pktlog in QCA99X0 2015-11-04 19:36:41 +02:00
htt_tx.c ath10k: set peer MFP flag in peer assoc command 2015-11-04 19:30:20 +02:00
htt.c ath10k: enable raw encap mode and software crypto engine 2015-07-29 11:28:24 +03:00
htt.h ath10k: add support for pktlog in QCA99X0 2015-11-04 19:36:41 +02:00
hw.c ath10k: add cycle/rx_clear counters frequency to hw_params 2015-08-17 16:46:21 +03:00
hw.h ath10k: add support for pktlog in QCA99X0 2015-11-04 19:36:41 +02:00
Kconfig
mac.c ath10k: set peer MFP flag in peer assoc command 2015-11-04 19:30:20 +02:00
mac.h ath10k: fix per-vif queue locking 2015-07-11 19:06:26 +03:00
Makefile ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
p2p.c ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
p2p.h ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
pci.c ath10k: add support for pktlog in QCA99X0 2015-11-04 19:36:41 +02:00
pci.h ath10k: disable PCI PS for QCA988X and QCA99X0 2015-10-19 17:38:01 +03:00
rx_desc.h ath10k: add support for qca99x0 Rx descriptors 2015-07-24 10:44:55 +03:00
spectral.c ath10k: add spectral scan support for 10.4 fw 2015-08-26 11:09:12 +03:00
spectral.h ath10k: refactor phyerr event handlers 2015-08-17 17:43:29 +03:00
swap.c ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
swap.h ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
targaddrs.h ath10k: add QCA9377 chipset support 2015-10-29 13:02:33 +02:00
testmode_i.h
testmode.c ath10k: add FW API support to test mode 2015-10-29 12:48:01 +02:00
testmode.h
thermal.c ath10k: add thermal throttling support for 10.4 firmware 2015-11-04 19:31:46 +02:00
thermal.h ath10k: configure thermal throttle while powering up 2015-03-23 17:16:37 +02:00
trace.c
trace.h ath10k: add extra check for frame tracing 2015-04-17 09:33:48 +03:00
txrx.c ath10k: use pre-allocated DMA buffer in Tx 2015-10-06 15:04:12 +03:00
txrx.h
wmi-ops.h ath10k: enable adaptive CCA 2015-10-28 21:33:03 +02:00
wmi-tlv.c ath10k: add abstraction layer for peer flags 2015-11-04 19:30:08 +02:00
wmi-tlv.h ath10k: add abstraction layer for peer flags 2015-11-04 19:30:08 +02:00
wmi.c ath10k: fix peer assoc complete WMI command for 10.4 2015-11-12 21:19:13 +02:00
wmi.h ath10k: fix peer assoc complete WMI command for 10.4 2015-11-12 21:19:13 +02:00
wow.c ath10k: fix hw reconfig on wow failure 2015-08-13 14:22:49 +03:00
wow.h ath10k: add WOW patterns support 2015-03-30 09:10:24 +03:00