mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
b5273951ba
This enables userspace to signal the bootloader to go into the bootloader or recovery mode. The magic values can be found in both the downstream kernel and the LK kernel (bootloader). Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
1343 lines
28 KiB
Plaintext
1343 lines
28 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
|
|
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
|
|
#include <dt-bindings/clock/qcom,rpmcc.h>
|
|
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "Qualcomm MSM8974";
|
|
compatible = "qcom,msm8974";
|
|
interrupt-parent = <&intc>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mpss@8000000 {
|
|
reg = <0x08000000 0x5100000>;
|
|
no-map;
|
|
};
|
|
|
|
mba@d100000 {
|
|
reg = <0x0d100000 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
reserved@d200000 {
|
|
reg = <0x0d200000 0xa00000>;
|
|
no-map;
|
|
};
|
|
|
|
adsp_region: adsp@dc00000 {
|
|
reg = <0x0dc00000 0x1900000>;
|
|
no-map;
|
|
};
|
|
|
|
venus@f500000 {
|
|
reg = <0x0f500000 0x500000>;
|
|
no-map;
|
|
};
|
|
|
|
smem_region: smem@fa00000 {
|
|
reg = <0xfa00000 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
tz@fc00000 {
|
|
reg = <0x0fc00000 0x160000>;
|
|
no-map;
|
|
};
|
|
|
|
rfsa@fd60000 {
|
|
reg = <0x0fd60000 0x20000>;
|
|
no-map;
|
|
};
|
|
|
|
rmtfs@fd80000 {
|
|
reg = <0x0fd80000 0x180000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_PPI 9 0xf04>;
|
|
|
|
CPU0: cpu@0 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc0>;
|
|
qcom,saw = <&saw0>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc1>;
|
|
qcom,saw = <&saw1>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU2: cpu@2 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc2>;
|
|
qcom,saw = <&saw2>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU3: cpu@3 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc3>;
|
|
qcom,saw = <&saw3>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
qcom,saw = <&saw_l2>;
|
|
};
|
|
|
|
idle-states {
|
|
CPU_SPC: spc {
|
|
compatible = "qcom,idle-state-spc",
|
|
"arm,idle-state";
|
|
entry-latency-us = <150>;
|
|
exit-latency-us = <200>;
|
|
min-residency-us = <2000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0>;
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu-thermal0 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 5>;
|
|
|
|
trips {
|
|
cpu_alert0: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit0: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal1 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 6>;
|
|
|
|
trips {
|
|
cpu_alert1: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit1: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal2 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 7>;
|
|
|
|
trips {
|
|
cpu_alert2: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit2: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal3 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 8>;
|
|
|
|
trips {
|
|
cpu_alert3: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit3: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,krait-pmu";
|
|
interrupts = <GIC_PPI 7 0xf04>;
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 2 0xf08>,
|
|
<GIC_PPI 3 0xf08>,
|
|
<GIC_PPI 4 0xf08>,
|
|
<GIC_PPI 1 0xf08>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
adsp-pil {
|
|
compatible = "qcom,msm8974-adsp-pil";
|
|
|
|
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
|
|
|
|
cx-supply = <&pm8841_s2>;
|
|
|
|
clocks = <&xo_board>;
|
|
clock-names = "xo";
|
|
|
|
memory-region = <&adsp_region>;
|
|
|
|
qcom,smem-states = <&adsp_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
|
|
memory-region = <&smem_region>;
|
|
qcom,rpm-msg-ram = <&rpm_msg_ram>;
|
|
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
smp2p-adsp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <443>, <429>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 10>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <2>;
|
|
|
|
adsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
adsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smp2p-modem {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <435>, <428>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 14>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smp2p-wcnss {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <451>, <431>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 18>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <4>;
|
|
|
|
wcnss_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
wcnss_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smsm {
|
|
compatible = "qcom,smsm";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
qcom,ipc-1 = <&apcs 8 13>;
|
|
qcom,ipc-2 = <&apcs 8 9>;
|
|
qcom,ipc-3 = <&apcs 8 19>;
|
|
|
|
apps_smsm: apps@0 {
|
|
reg = <0>;
|
|
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smsm: modem@1 {
|
|
reg = <1>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
adsp_smsm: adsp@2 {
|
|
reg = <2>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
wcnss_smsm: wcnss@7 {
|
|
reg = <7>;
|
|
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm";
|
|
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
|
|
clock-names = "core", "bus", "iface";
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@f9000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0xf9000000 0x1000>,
|
|
<0xf9002000 0x1000>;
|
|
};
|
|
|
|
apcs: syscon@f9011000 {
|
|
compatible = "syscon";
|
|
reg = <0xf9011000 0x1000>;
|
|
};
|
|
|
|
qfprom: qfprom@fc4bc000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "qcom,qfprom";
|
|
reg = <0xfc4bc000 0x1000>;
|
|
tsens_calib: calib@d0 {
|
|
reg = <0xd0 0x18>;
|
|
};
|
|
tsens_backup: backup@440 {
|
|
reg = <0x440 0x10>;
|
|
};
|
|
};
|
|
|
|
tsens: thermal-sensor@fc4a9000 {
|
|
compatible = "qcom,msm8974-tsens";
|
|
reg = <0xfc4a9000 0x1000>, /* TM */
|
|
<0xfc4a8000 0x1000>; /* SROT */
|
|
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
|
|
nvmem-cell-names = "calib", "calib_backup";
|
|
#qcom,sensors = <11>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
timer@f9020000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0xf9020000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@f9021000 {
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9021000 0x1000>,
|
|
<0xf9022000 0x1000>;
|
|
};
|
|
|
|
frame@f9023000 {
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9023000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9024000 {
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9024000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9025000 {
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9025000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9026000 {
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9026000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9027000 {
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9027000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9028000 {
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9028000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
saw0: power-controller@f9089000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw1: power-controller@f9099000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw2: power-controller@f90a9000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw3: power-controller@f90b9000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw_l2: power-controller@f9012000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0xf9012000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
acc0: clock-controller@f9088000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc1: clock-controller@f9098000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc2: clock-controller@f90a8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc3: clock-controller@f90b8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
restart@fc4ab000 {
|
|
compatible = "qcom,pshold";
|
|
reg = <0xfc4ab000 0x4>;
|
|
};
|
|
|
|
gcc: clock-controller@fc400000 {
|
|
compatible = "qcom,gcc-msm8974";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
reg = <0xfc400000 0x4000>;
|
|
};
|
|
|
|
tcsr: syscon@fd4a0000 {
|
|
compatible = "syscon";
|
|
reg = <0xfd4a0000 0x10000>;
|
|
};
|
|
|
|
tcsr_mutex_block: syscon@fd484000 {
|
|
compatible = "syscon";
|
|
reg = <0xfd484000 0x2000>;
|
|
};
|
|
|
|
mmcc: clock-controller@fd8c0000 {
|
|
compatible = "qcom,mmcc-msm8974";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
reg = <0xfd8c0000 0x6000>;
|
|
};
|
|
|
|
tcsr_mutex: tcsr-mutex {
|
|
compatible = "qcom,tcsr-mutex";
|
|
syscon = <&tcsr_mutex_block 0 0x80>;
|
|
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
rpm_msg_ram: memory@fc428000 {
|
|
compatible = "qcom,rpm-msg-ram";
|
|
reg = <0xfc428000 0x4000>;
|
|
};
|
|
|
|
blsp1_uart1: serial@f991d000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xf991d000 0x1000>;
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_uart2: serial@f991e000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xf991e000 0x1000>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f9824900 {
|
|
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
|
|
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
|
|
<&gcc GCC_SDCC1_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f9864900 {
|
|
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
|
|
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
|
|
<&gcc GCC_SDCC3_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f98a4900 {
|
|
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
|
|
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
|
|
<&gcc GCC_SDCC2_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
otg: usb@f9a55000 {
|
|
compatible = "qcom,ci-hdrc";
|
|
reg = <0xf9a55000 0x200>,
|
|
<0xf9a55200 0x200>;
|
|
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
|
|
<&gcc GCC_USB_HS_SYSTEM_CLK>;
|
|
clock-names = "iface", "core";
|
|
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
|
|
assigned-clock-rates = <75000000>;
|
|
resets = <&gcc GCC_USB_HS_BCR>;
|
|
reset-names = "core";
|
|
phy_type = "ulpi";
|
|
dr_mode = "otg";
|
|
ahb-burst-config = <0>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
#reset-cells = <1>;
|
|
|
|
ulpi {
|
|
usb_hs1_phy: phy@a {
|
|
compatible = "qcom,usb-hs-phy-msm8974",
|
|
"qcom,usb-hs-phy";
|
|
#phy-cells = <0>;
|
|
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
|
|
clock-names = "ref", "sleep";
|
|
resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
|
|
reset-names = "phy", "por";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_hs2_phy: phy@b {
|
|
compatible = "qcom,usb-hs-phy-msm8974",
|
|
"qcom,usb-hs-phy";
|
|
#phy-cells = <0>;
|
|
clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
|
|
clock-names = "ref", "sleep";
|
|
resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
|
|
reset-names = "phy", "por";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
rng@f9bff000 {
|
|
compatible = "qcom,prng";
|
|
reg = <0xf9bff000 0x200>;
|
|
clocks = <&gcc GCC_PRNG_AHB_CLK>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
msmgpio: pinctrl@fd510000 {
|
|
compatible = "qcom,msm8974-pinctrl";
|
|
reg = <0xfd510000 0x4000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
i2c@f9923000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9923000 0x1000>;
|
|
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c@f9924000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9924000 0x1000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp_i2c3: i2c@f9925000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9925000 0x1000>;
|
|
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp_i2c8: i2c@f9964000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9964000 0x1000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp_i2c11: i2c@f9967000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9967000 0x1000>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
blsp_i2c12: i2c@f9968000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9968000 0x1000>;
|
|
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spmi_bus: spmi@fc4cf000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg-names = "core", "intr", "cnfg";
|
|
reg = <0xfc4cf000 0x1000>,
|
|
<0xfc4cb000 0x1000>,
|
|
<0xfc4ca000 0x1000>;
|
|
interrupt-names = "periph_irq";
|
|
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,ee = <0>;
|
|
qcom,channel = <0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
};
|
|
|
|
blsp2_dma: dma-controller@f9944000 {
|
|
compatible = "qcom,bam-v1.4.0";
|
|
reg = <0xf9944000 0x19000>;
|
|
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
etr@fc322000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0xfc322000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
port {
|
|
etr_in: endpoint {
|
|
remote-endpoint = <&replicator_out0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@fc318000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0xfc318000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
port {
|
|
tpiu_in: endpoint {
|
|
remote-endpoint = <&replicator_out1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
replicator@fc31c000 {
|
|
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
|
|
reg = <0xfc31c000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
out-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out0: endpoint {
|
|
remote-endpoint = <&etr_in>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out1: endpoint {
|
|
remote-endpoint = <&tpiu_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
port {
|
|
replicator_in: endpoint {
|
|
remote-endpoint = <&etf_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etf@fc307000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0xfc307000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
out-ports {
|
|
port {
|
|
etf_out: endpoint {
|
|
remote-endpoint = <&replicator_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
port {
|
|
etf_in: endpoint {
|
|
remote-endpoint = <&merger_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc31b000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0xfc31b000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Not described input ports:
|
|
* 0 - connected trought funnel to Audio, Modem and
|
|
* Resource and Power Manager CPU's
|
|
* 2...7 - not-connected
|
|
*/
|
|
port@1 {
|
|
reg = <1>;
|
|
merger_in1: endpoint {
|
|
remote-endpoint = <&funnel1_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
merger_out: endpoint {
|
|
remote-endpoint = <&etf_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc31a000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0xfc31a000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Not described input ports:
|
|
* 0 - not-connected
|
|
* 1 - connected trought funnel to Multimedia CPU
|
|
* 2 - connected to Wireless CPU
|
|
* 3 - not-connected
|
|
* 4 - not-connected
|
|
* 6 - not-connected
|
|
* 7 - connected to STM
|
|
*/
|
|
port@5 {
|
|
reg = <5>;
|
|
funnel1_in5: endpoint {
|
|
remote-endpoint = <&kpss_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
funnel1_out: endpoint {
|
|
remote-endpoint = <&merger_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0xfc345000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
kpss_in0: endpoint {
|
|
remote-endpoint = <&etm0_out>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
kpss_in1: endpoint {
|
|
remote-endpoint = <&etm1_out>;
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
kpss_in2: endpoint {
|
|
remote-endpoint = <&etm2_out>;
|
|
};
|
|
};
|
|
port@3 {
|
|
reg = <3>;
|
|
kpss_in3: endpoint {
|
|
remote-endpoint = <&etm3_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
kpss_out: endpoint {
|
|
remote-endpoint = <&funnel1_in5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33c000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33c000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU0>;
|
|
|
|
out-ports {
|
|
port {
|
|
etm0_out: endpoint {
|
|
remote-endpoint = <&kpss_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33d000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33d000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU1>;
|
|
|
|
out-ports {
|
|
port {
|
|
etm1_out: endpoint {
|
|
remote-endpoint = <&kpss_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33e000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33e000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU2>;
|
|
|
|
out-ports {
|
|
port {
|
|
etm2_out: endpoint {
|
|
remote-endpoint = <&kpss_in2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33f000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33f000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU3>;
|
|
|
|
out-ports {
|
|
port {
|
|
etm3_out: endpoint {
|
|
remote-endpoint = <&kpss_in3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdss: mdss@fd900000 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,mdss";
|
|
reg = <0xfd900000 0x100>,
|
|
<0xfd924000 0x1000>;
|
|
reg-names = "mdss_phys",
|
|
"vbif_phys";
|
|
|
|
power-domains = <&mmcc MDSS_GDSC>;
|
|
|
|
clocks = <&mmcc MDSS_AHB_CLK>,
|
|
<&mmcc MDSS_AXI_CLK>,
|
|
<&mmcc MDSS_VSYNC_CLK>;
|
|
clock-names = "iface",
|
|
"bus",
|
|
"vsync";
|
|
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mdp: mdp@fd900000 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,mdp5";
|
|
reg = <0xfd900100 0x22000>;
|
|
reg-names = "mdp_phys";
|
|
|
|
interrupt-parent = <&mdss>;
|
|
interrupts = <0 0>;
|
|
|
|
clocks = <&mmcc MDSS_AHB_CLK>,
|
|
<&mmcc MDSS_AXI_CLK>,
|
|
<&mmcc MDSS_MDP_CLK>,
|
|
<&mmcc MDSS_VSYNC_CLK>;
|
|
clock-names = "iface",
|
|
"bus",
|
|
"core",
|
|
"vsync";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
mdp5_intf1_out: endpoint {
|
|
remote-endpoint = <&dsi0_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi0: dsi@fd922800 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,mdss-dsi-ctrl";
|
|
reg = <0xfd922800 0x1f8>;
|
|
reg-names = "dsi_ctrl";
|
|
|
|
interrupt-parent = <&mdss>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
|
|
<&mmcc PCLK0_CLK_SRC>;
|
|
assigned-clock-parents = <&dsi_phy0 0>,
|
|
<&dsi_phy0 1>;
|
|
|
|
clocks = <&mmcc MDSS_MDP_CLK>,
|
|
<&mmcc MDSS_AHB_CLK>,
|
|
<&mmcc MDSS_AXI_CLK>,
|
|
<&mmcc MDSS_BYTE0_CLK>,
|
|
<&mmcc MDSS_PCLK0_CLK>,
|
|
<&mmcc MDSS_ESC0_CLK>,
|
|
<&mmcc MMSS_MISC_AHB_CLK>;
|
|
clock-names = "mdp_core",
|
|
"iface",
|
|
"bus",
|
|
"byte",
|
|
"pixel",
|
|
"core",
|
|
"core_mmss";
|
|
|
|
phys = <&dsi_phy0>;
|
|
phy-names = "dsi-phy";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
dsi0_in: endpoint {
|
|
remote-endpoint = <&mdp5_intf1_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dsi0_out: endpoint {
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi_phy0: dsi-phy@fd922a00 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,dsi-phy-28nm-hpm";
|
|
reg = <0xfd922a00 0xd4>,
|
|
<0xfd922b00 0x280>,
|
|
<0xfd922d80 0x30>;
|
|
reg-names = "dsi_pll",
|
|
"dsi_phy",
|
|
"dsi_phy_regulator";
|
|
|
|
#clock-cells = <1>;
|
|
#phy-cells = <0>;
|
|
qcom,dsi-phy-index = <0>;
|
|
|
|
clocks = <&mmcc MDSS_AHB_CLK>;
|
|
clock-names = "iface";
|
|
};
|
|
};
|
|
|
|
imem@fe805000 {
|
|
status = "disabled";
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0xfe805000 0x1000>;
|
|
|
|
reboot-mode {
|
|
compatible = "syscon-reboot-mode";
|
|
offset = <0x65c>;
|
|
};
|
|
};
|
|
};
|
|
|
|
smd {
|
|
compatible = "qcom,smd";
|
|
|
|
adsp {
|
|
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 8>;
|
|
qcom,smd-edge = <1>;
|
|
};
|
|
|
|
modem {
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 12>;
|
|
qcom,smd-edge = <0>;
|
|
};
|
|
|
|
rpm {
|
|
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
|
|
qcom,ipc = <&apcs 8 0>;
|
|
qcom,smd-edge = <15>;
|
|
|
|
rpm_requests {
|
|
compatible = "qcom,rpm-msm8974";
|
|
qcom,smd-channels = "rpm_requests";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pm8841-regulators {
|
|
compatible = "qcom,rpm-pm8841-regulators";
|
|
|
|
pm8841_s1: s1 {};
|
|
pm8841_s2: s2 {};
|
|
pm8841_s3: s3 {};
|
|
pm8841_s4: s4 {};
|
|
pm8841_s5: s5 {};
|
|
pm8841_s6: s6 {};
|
|
pm8841_s7: s7 {};
|
|
pm8841_s8: s8 {};
|
|
};
|
|
|
|
pm8941-regulators {
|
|
compatible = "qcom,rpm-pm8941-regulators";
|
|
|
|
pm8941_s1: s1 {};
|
|
pm8941_s2: s2 {};
|
|
pm8941_s3: s3 {};
|
|
|
|
pm8941_l1: l1 {};
|
|
pm8941_l2: l2 {};
|
|
pm8941_l3: l3 {};
|
|
pm8941_l4: l4 {};
|
|
pm8941_l5: l5 {};
|
|
pm8941_l6: l6 {};
|
|
pm8941_l7: l7 {};
|
|
pm8941_l8: l8 {};
|
|
pm8941_l9: l9 {};
|
|
pm8941_l10: l10 {};
|
|
pm8941_l11: l11 {};
|
|
pm8941_l12: l12 {};
|
|
pm8941_l13: l13 {};
|
|
pm8941_l14: l14 {};
|
|
pm8941_l15: l15 {};
|
|
pm8941_l16: l16 {};
|
|
pm8941_l17: l17 {};
|
|
pm8941_l18: l18 {};
|
|
pm8941_l19: l19 {};
|
|
pm8941_l20: l20 {};
|
|
pm8941_l21: l21 {};
|
|
pm8941_l22: l22 {};
|
|
pm8941_l23: l23 {};
|
|
pm8941_l24: l24 {};
|
|
|
|
pm8941_lvs1: lvs1 {};
|
|
pm8941_lvs2: lvs2 {};
|
|
pm8941_lvs3: lvs3 {};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vreg_boost: vreg-boost {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vreg-boost";
|
|
regulator-min-microvolt = <3150000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&boost_bypass_n_pin>;
|
|
};
|
|
vreg_vph_pwr: vreg-vph-pwr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph-pwr";
|
|
|
|
regulator-min-microvolt = <3600000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
|
|
regulator-always-on;
|
|
};
|
|
};
|