linux_dsm_epyc7002/drivers/usb/usbip/stub_rx.c
Suwan Kim ea44d19076 usbip: Implement SG support to vhci-hcd and stub driver
There are bugs on vhci with usb 3.0 storage device. In USB, each SG
list entry buffer should be divisible by the bulk max packet size.
But with native SG support, this problem doesn't matter because the
SG buffer is treated as contiguous buffer. But without native SG
support, USB storage driver breaks SG list into several URBs and the
error occurs because of a buffer size of URB that cannot be divided
by the bulk max packet size. The error situation is as follows.

When USB Storage driver requests 31.5 KB data and has SG list which
has 3584 bytes buffer followed by 7 4096 bytes buffer for some
reason. USB Storage driver splits this SG list into several URBs
because VHCI doesn't support SG and sends them separately. So the
first URB buffer size is 3584 bytes. When receiving data from device,
USB 3.0 device sends data packet of 1024 bytes size because the max
packet size of BULK pipe is 1024 bytes. So device sends 4096 bytes.
But the first URB buffer has only 3584 bytes buffer size. So host
controller terminates the transfer even though there is more data to
receive. So, vhci needs to support SG transfer to prevent this error.

In this patch, vhci supports SG regardless of whether the server's
host controller supports SG or not, because stub driver splits SG
list into several URBs if the server's host controller doesn't
support SG.

To support SG, vhci sets URB_DMA_MAP_SG flag in urb->transfer_flags
if URB has SG list and this flag will tell stub driver to use SG
list. After receiving urb from stub driver, vhci clear URB_DMA_MAP_SG
flag to avoid unnecessary DMA unmapping in HCD.

vhci sends each SG list entry to stub driver. Then, stub driver sees
the total length of the buffer and allocates SG table and pages
according to the total buffer length calling sgl_alloc(). After stub
driver receives completed URB, it again sends each SG list entry to
vhci.

If the server's host controller doesn't support SG, stub driver
breaks a single SG request into several URBs and submits them to
the server's host controller. When all the split URBs are completed,
stub driver reassembles the URBs into a single return command and
sends it to vhci.

Moreover, in the situation where vhci supports SG, but stub driver
does not, or vice versa, usbip works normally. Because there is no
protocol modification, there is no problem in communication between
server and client even if the one has a kernel without SG support.

In the case of vhci supports SG and stub driver doesn't, because
vhci sends only the total length of the buffer to stub driver as
it did before the patch applied, stub driver only needs to allocate
the required length of buffers using only kmalloc() regardless of
whether vhci supports SG or not. But stub driver has to allocate
buffer with kmalloc() as much as the total length of SG buffer which
is quite huge when vhci sends SG request, so it has overhead in
buffer allocation in this situation.

If stub driver needs to send data buffer to vhci because of IN pipe,
stub driver also sends only total length of buffer as metadata and
then sends real data as vhci does. Then vhci receive data from stub
driver and store it to the corresponding buffer of SG list entry.

And for the case of stub driver supports SG and vhci doesn't, since
the USB storage driver checks that vhci doesn't support SG and sends
the request to stub driver by splitting the SG list into multiple
URBs, stub driver allocates a buffer for each URB with kmalloc() as
it did before this patch.

* Test environment

Test uses two difference machines and two different kernel version
to make mismatch situation between the client and the server where
vhci supports SG, but stub driver does not, or vice versa. All tests
are conducted in both full SG support that both vhci and stub support
SG and half SG support that is the mismatch situation. Test kernel
version is 5.3-rc6 with commit "usb: add a HCD_DMA flag instead of
guestimating DMA capabilities" to avoid unnecessary DMA mapping and
unmapping.

 - Test kernel version
    - 5.3-rc6 with SG support
    - 5.1.20-200.fc29.x86_64 without SG support

* SG support test

 - Test devices
    - Super-speed storage device - SanDisk Ultra USB 3.0
    - High-speed storage device - SMI corporation USB 2.0 flash drive

 - Test description

Test read and write operation of mass storage device that uses the
BULK transfer. In test, the client reads and writes files whose size
is over 1G and it works normally.

* Regression test

 - Test devices
    - Super-speed device - Logitech Brio webcam
    - High-speed device  - Logitech C920 HD Pro webcam
    - Full-speed device  - Logitech bluetooth mouse
                         - Britz BR-Orion speaker
    - Low-speed device   - Logitech wired mouse

 - Test description

Moving and click test for mouse. To test the webcam, use gnome-cheese.
To test the speaker, play music and video on the client. All works
normally.

* VUDC compatibility test

VUDC also works well with this patch. Tests are done with two USB
gadget created by CONFIGFS USB gadget. Both use the BULK pipe.

        1. Serial gadget
        2. Mass storage gadget

 - Serial gadget test

Serial gadget on the host sends and receives data using cat command
on the /dev/ttyGS<N>. The client uses minicom to communicate with
the serial gadget.

 - Mass storage gadget test

After connecting the gadget with vhci, use "dd" to test read and
write operation on the client side.

Read  - dd if=/dev/sd<N> iflag=direct of=/dev/null bs=1G count=1
Write - dd if=<my file path> iflag=direct of=/dev/sd<N> bs=1G count=1

Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190828032741.12234-1-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03 16:00:38 +02:00

673 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2003-2008 Takahiro Hirofuchi
*/
#include <asm/byteorder.h>
#include <linux/kthread.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
static int is_clear_halt_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
req = (struct usb_ctrlrequest *) urb->setup_packet;
return (req->bRequest == USB_REQ_CLEAR_FEATURE) &&
(req->bRequestType == USB_RECIP_ENDPOINT) &&
(req->wValue == USB_ENDPOINT_HALT);
}
static int is_set_interface_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
req = (struct usb_ctrlrequest *) urb->setup_packet;
return (req->bRequest == USB_REQ_SET_INTERFACE) &&
(req->bRequestType == USB_RECIP_INTERFACE);
}
static int is_set_configuration_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
req = (struct usb_ctrlrequest *) urb->setup_packet;
return (req->bRequest == USB_REQ_SET_CONFIGURATION) &&
(req->bRequestType == USB_RECIP_DEVICE);
}
static int is_reset_device_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
__u16 value;
__u16 index;
req = (struct usb_ctrlrequest *) urb->setup_packet;
value = le16_to_cpu(req->wValue);
index = le16_to_cpu(req->wIndex);
if ((req->bRequest == USB_REQ_SET_FEATURE) &&
(req->bRequestType == USB_RT_PORT) &&
(value == USB_PORT_FEAT_RESET)) {
usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index);
return 1;
} else
return 0;
}
static int tweak_clear_halt_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
int target_endp;
int target_dir;
int target_pipe;
int ret;
req = (struct usb_ctrlrequest *) urb->setup_packet;
/*
* The stalled endpoint is specified in the wIndex value. The endpoint
* of the urb is the target of this clear_halt request (i.e., control
* endpoint).
*/
target_endp = le16_to_cpu(req->wIndex) & 0x000f;
/* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80. */
target_dir = le16_to_cpu(req->wIndex) & 0x0080;
if (target_dir)
target_pipe = usb_rcvctrlpipe(urb->dev, target_endp);
else
target_pipe = usb_sndctrlpipe(urb->dev, target_endp);
ret = usb_clear_halt(urb->dev, target_pipe);
if (ret < 0)
dev_err(&urb->dev->dev,
"usb_clear_halt error: devnum %d endp %d ret %d\n",
urb->dev->devnum, target_endp, ret);
else
dev_info(&urb->dev->dev,
"usb_clear_halt done: devnum %d endp %d\n",
urb->dev->devnum, target_endp);
return ret;
}
static int tweak_set_interface_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
__u16 alternate;
__u16 interface;
int ret;
req = (struct usb_ctrlrequest *) urb->setup_packet;
alternate = le16_to_cpu(req->wValue);
interface = le16_to_cpu(req->wIndex);
usbip_dbg_stub_rx("set_interface: inf %u alt %u\n",
interface, alternate);
ret = usb_set_interface(urb->dev, interface, alternate);
if (ret < 0)
dev_err(&urb->dev->dev,
"usb_set_interface error: inf %u alt %u ret %d\n",
interface, alternate, ret);
else
dev_info(&urb->dev->dev,
"usb_set_interface done: inf %u alt %u\n",
interface, alternate);
return ret;
}
static int tweak_set_configuration_cmd(struct urb *urb)
{
struct stub_priv *priv = (struct stub_priv *) urb->context;
struct stub_device *sdev = priv->sdev;
struct usb_ctrlrequest *req;
__u16 config;
int err;
req = (struct usb_ctrlrequest *) urb->setup_packet;
config = le16_to_cpu(req->wValue);
err = usb_set_configuration(sdev->udev, config);
if (err && err != -ENODEV)
dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n",
config, err);
return 0;
}
static int tweak_reset_device_cmd(struct urb *urb)
{
struct stub_priv *priv = (struct stub_priv *) urb->context;
struct stub_device *sdev = priv->sdev;
dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
if (usb_lock_device_for_reset(sdev->udev, NULL) < 0) {
dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
return 0;
}
usb_reset_device(sdev->udev);
usb_unlock_device(sdev->udev);
return 0;
}
/*
* clear_halt, set_interface, and set_configuration require special tricks.
*/
static void tweak_special_requests(struct urb *urb)
{
if (!urb || !urb->setup_packet)
return;
if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
return;
if (is_clear_halt_cmd(urb))
/* tweak clear_halt */
tweak_clear_halt_cmd(urb);
else if (is_set_interface_cmd(urb))
/* tweak set_interface */
tweak_set_interface_cmd(urb);
else if (is_set_configuration_cmd(urb))
/* tweak set_configuration */
tweak_set_configuration_cmd(urb);
else if (is_reset_device_cmd(urb))
tweak_reset_device_cmd(urb);
else
usbip_dbg_stub_rx("no need to tweak\n");
}
/*
* stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb().
* By unlinking the urb asynchronously, stub_rx can continuously
* process coming urbs. Even if the urb is unlinked, its completion
* handler will be called and stub_tx will send a return pdu.
*
* See also comments about unlinking strategy in vhci_hcd.c.
*/
static int stub_recv_cmd_unlink(struct stub_device *sdev,
struct usbip_header *pdu)
{
int ret, i;
unsigned long flags;
struct stub_priv *priv;
spin_lock_irqsave(&sdev->priv_lock, flags);
list_for_each_entry(priv, &sdev->priv_init, list) {
if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
continue;
/*
* This matched urb is not completed yet (i.e., be in
* flight in usb hcd hardware/driver). Now we are
* cancelling it. The unlinking flag means that we are
* now not going to return the normal result pdu of a
* submission request, but going to return a result pdu
* of the unlink request.
*/
priv->unlinking = 1;
/*
* In the case that unlinking flag is on, prev->seqnum
* is changed from the seqnum of the cancelling urb to
* the seqnum of the unlink request. This will be used
* to make the result pdu of the unlink request.
*/
priv->seqnum = pdu->base.seqnum;
spin_unlock_irqrestore(&sdev->priv_lock, flags);
/*
* usb_unlink_urb() is now out of spinlocking to avoid
* spinlock recursion since stub_complete() is
* sometimes called in this context but not in the
* interrupt context. If stub_complete() is executed
* before we call usb_unlink_urb(), usb_unlink_urb()
* will return an error value. In this case, stub_tx
* will return the result pdu of this unlink request
* though submission is completed and actual unlinking
* is not executed. OK?
*/
/* In the above case, urb->status is not -ECONNRESET,
* so a driver in a client host will know the failure
* of the unlink request ?
*/
for (i = priv->completed_urbs; i < priv->num_urbs; i++) {
ret = usb_unlink_urb(priv->urbs[i]);
if (ret != -EINPROGRESS)
dev_err(&priv->urbs[i]->dev->dev,
"failed to unlink %d/%d urb of seqnum %lu, ret %d\n",
i + 1, priv->num_urbs,
priv->seqnum, ret);
}
return 0;
}
usbip_dbg_stub_rx("seqnum %d is not pending\n",
pdu->u.cmd_unlink.seqnum);
/*
* The urb of the unlink target is not found in priv_init queue. It was
* already completed and its results is/was going to be sent by a
* CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only
* return the completeness of this unlink request to vhci_hcd.
*/
stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0);
spin_unlock_irqrestore(&sdev->priv_lock, flags);
return 0;
}
static int valid_request(struct stub_device *sdev, struct usbip_header *pdu)
{
struct usbip_device *ud = &sdev->ud;
int valid = 0;
if (pdu->base.devid == sdev->devid) {
spin_lock_irq(&ud->lock);
if (ud->status == SDEV_ST_USED) {
/* A request is valid. */
valid = 1;
}
spin_unlock_irq(&ud->lock);
}
return valid;
}
static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
struct usbip_header *pdu)
{
struct stub_priv *priv;
struct usbip_device *ud = &sdev->ud;
unsigned long flags;
spin_lock_irqsave(&sdev->priv_lock, flags);
priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC);
if (!priv) {
dev_err(&sdev->udev->dev, "alloc stub_priv\n");
spin_unlock_irqrestore(&sdev->priv_lock, flags);
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return NULL;
}
priv->seqnum = pdu->base.seqnum;
priv->sdev = sdev;
/*
* After a stub_priv is linked to a list_head,
* our error handler can free allocated data.
*/
list_add_tail(&priv->list, &sdev->priv_init);
spin_unlock_irqrestore(&sdev->priv_lock, flags);
return priv;
}
static int get_pipe(struct stub_device *sdev, struct usbip_header *pdu)
{
struct usb_device *udev = sdev->udev;
struct usb_host_endpoint *ep;
struct usb_endpoint_descriptor *epd = NULL;
int epnum = pdu->base.ep;
int dir = pdu->base.direction;
if (epnum < 0 || epnum > 15)
goto err_ret;
if (dir == USBIP_DIR_IN)
ep = udev->ep_in[epnum & 0x7f];
else
ep = udev->ep_out[epnum & 0x7f];
if (!ep)
goto err_ret;
epd = &ep->desc;
if (usb_endpoint_xfer_control(epd)) {
if (dir == USBIP_DIR_OUT)
return usb_sndctrlpipe(udev, epnum);
else
return usb_rcvctrlpipe(udev, epnum);
}
if (usb_endpoint_xfer_bulk(epd)) {
if (dir == USBIP_DIR_OUT)
return usb_sndbulkpipe(udev, epnum);
else
return usb_rcvbulkpipe(udev, epnum);
}
if (usb_endpoint_xfer_int(epd)) {
if (dir == USBIP_DIR_OUT)
return usb_sndintpipe(udev, epnum);
else
return usb_rcvintpipe(udev, epnum);
}
if (usb_endpoint_xfer_isoc(epd)) {
/* validate number of packets */
if (pdu->u.cmd_submit.number_of_packets < 0 ||
pdu->u.cmd_submit.number_of_packets >
USBIP_MAX_ISO_PACKETS) {
dev_err(&sdev->udev->dev,
"CMD_SUBMIT: isoc invalid num packets %d\n",
pdu->u.cmd_submit.number_of_packets);
return -1;
}
if (dir == USBIP_DIR_OUT)
return usb_sndisocpipe(udev, epnum);
else
return usb_rcvisocpipe(udev, epnum);
}
err_ret:
/* NOT REACHED */
dev_err(&sdev->udev->dev, "CMD_SUBMIT: invalid epnum %d\n", epnum);
return -1;
}
static void masking_bogus_flags(struct urb *urb)
{
int xfertype;
struct usb_device *dev;
struct usb_host_endpoint *ep;
int is_out;
unsigned int allowed;
if (!urb || urb->hcpriv || !urb->complete)
return;
dev = urb->dev;
if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
return;
ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
[usb_pipeendpoint(urb->pipe)];
if (!ep)
return;
xfertype = usb_endpoint_type(&ep->desc);
if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
struct usb_ctrlrequest *setup =
(struct usb_ctrlrequest *) urb->setup_packet;
if (!setup)
return;
is_out = !(setup->bRequestType & USB_DIR_IN) ||
!setup->wLength;
} else {
is_out = usb_endpoint_dir_out(&ep->desc);
}
/* enforce simple/standard policy */
allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT |
URB_DIR_MASK | URB_FREE_BUFFER);
switch (xfertype) {
case USB_ENDPOINT_XFER_BULK:
if (is_out)
allowed |= URB_ZERO_PACKET;
/* FALLTHROUGH */
default: /* all non-iso endpoints */
if (!is_out)
allowed |= URB_SHORT_NOT_OK;
break;
case USB_ENDPOINT_XFER_ISOC:
allowed |= URB_ISO_ASAP;
break;
}
urb->transfer_flags &= allowed;
}
static int stub_recv_xbuff(struct usbip_device *ud, struct stub_priv *priv)
{
int ret;
int i;
for (i = 0; i < priv->num_urbs; i++) {
ret = usbip_recv_xbuff(ud, priv->urbs[i]);
if (ret < 0)
break;
}
return ret;
}
static void stub_recv_cmd_submit(struct stub_device *sdev,
struct usbip_header *pdu)
{
struct stub_priv *priv;
struct usbip_device *ud = &sdev->ud;
struct usb_device *udev = sdev->udev;
struct scatterlist *sgl = NULL, *sg;
void *buffer = NULL;
unsigned long long buf_len;
int nents;
int num_urbs = 1;
int pipe = get_pipe(sdev, pdu);
int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG;
int support_sg = 1;
int np = 0;
int ret, i;
if (pipe == -1)
return;
priv = stub_priv_alloc(sdev, pdu);
if (!priv)
return;
buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
/* allocate urb transfer buffer, if needed */
if (buf_len) {
if (use_sg) {
sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
if (!sgl)
goto err_malloc;
} else {
buffer = kzalloc(buf_len, GFP_KERNEL);
if (!buffer)
goto err_malloc;
}
}
/* Check if the server's HCD supports SG */
if (use_sg && !udev->bus->sg_tablesize) {
/*
* If the server's HCD doesn't support SG, break a single SG
* request into several URBs and map each SG list entry to
* corresponding URB buffer. The previously allocated SG
* list is stored in priv->sgl (If the server's HCD support SG,
* SG list is stored only in urb->sg) and it is used as an
* indicator that the server split single SG request into
* several URBs. Later, priv->sgl is used by stub_complete() and
* stub_send_ret_submit() to reassemble the divied URBs.
*/
support_sg = 0;
num_urbs = nents;
priv->completed_urbs = 0;
pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG;
}
/* allocate urb array */
priv->num_urbs = num_urbs;
priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
if (!priv->urbs)
goto err_urbs;
/* setup a urb */
if (support_sg) {
if (usb_pipeisoc(pipe))
np = pdu->u.cmd_submit.number_of_packets;
priv->urbs[0] = usb_alloc_urb(np, GFP_KERNEL);
if (!priv->urbs[0])
goto err_urb;
if (buf_len) {
if (use_sg) {
priv->urbs[0]->sg = sgl;
priv->urbs[0]->num_sgs = nents;
priv->urbs[0]->transfer_buffer = NULL;
} else {
priv->urbs[0]->transfer_buffer = buffer;
}
}
/* copy urb setup packet */
priv->urbs[0]->setup_packet = kmemdup(&pdu->u.cmd_submit.setup,
8, GFP_KERNEL);
if (!priv->urbs[0]->setup_packet) {
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return;
}
usbip_pack_pdu(pdu, priv->urbs[0], USBIP_CMD_SUBMIT, 0);
} else {
for_each_sg(sgl, sg, nents, i) {
priv->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
/* The URBs which is previously allocated will be freed
* in stub_device_cleanup_urbs() if error occurs.
*/
if (!priv->urbs[i])
goto err_urb;
usbip_pack_pdu(pdu, priv->urbs[i], USBIP_CMD_SUBMIT, 0);
priv->urbs[i]->transfer_buffer = sg_virt(sg);
priv->urbs[i]->transfer_buffer_length = sg->length;
}
priv->sgl = sgl;
}
for (i = 0; i < num_urbs; i++) {
/* set other members from the base header of pdu */
priv->urbs[i]->context = (void *) priv;
priv->urbs[i]->dev = udev;
priv->urbs[i]->pipe = pipe;
priv->urbs[i]->complete = stub_complete;
/* no need to submit an intercepted request, but harmless? */
tweak_special_requests(priv->urbs[i]);
masking_bogus_flags(priv->urbs[i]);
}
if (stub_recv_xbuff(ud, priv) < 0)
return;
if (usbip_recv_iso(ud, priv->urbs[0]) < 0)
return;
/* urb is now ready to submit */
for (i = 0; i < priv->num_urbs; i++) {
ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL);
if (ret == 0)
usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
pdu->base.seqnum);
else {
dev_err(&udev->dev, "submit_urb error, %d\n", ret);
usbip_dump_header(pdu);
usbip_dump_urb(priv->urbs[i]);
/*
* Pessimistic.
* This connection will be discarded.
*/
usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
break;
}
}
usbip_dbg_stub_rx("Leave\n");
return;
err_urb:
kfree(priv->urbs);
err_urbs:
kfree(buffer);
sgl_free(sgl);
err_malloc:
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
}
/* recv a pdu */
static void stub_rx_pdu(struct usbip_device *ud)
{
int ret;
struct usbip_header pdu;
struct stub_device *sdev = container_of(ud, struct stub_device, ud);
struct device *dev = &sdev->udev->dev;
usbip_dbg_stub_rx("Enter\n");
memset(&pdu, 0, sizeof(pdu));
/* receive a pdu header */
ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
if (ret != sizeof(pdu)) {
dev_err(dev, "recv a header, %d\n", ret);
usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
return;
}
usbip_header_correct_endian(&pdu, 0);
if (usbip_dbg_flag_stub_rx)
usbip_dump_header(&pdu);
if (!valid_request(sdev, &pdu)) {
dev_err(dev, "recv invalid request\n");
usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
return;
}
switch (pdu.base.command) {
case USBIP_CMD_UNLINK:
stub_recv_cmd_unlink(sdev, &pdu);
break;
case USBIP_CMD_SUBMIT:
stub_recv_cmd_submit(sdev, &pdu);
break;
default:
/* NOTREACHED */
dev_err(dev, "unknown pdu\n");
usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
break;
}
}
int stub_rx_loop(void *data)
{
struct usbip_device *ud = data;
while (!kthread_should_stop()) {
if (usbip_event_happened(ud))
break;
stub_rx_pdu(ud);
}
return 0;
}