mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 03:55:02 +07:00
3d337848ec
In the example for the pwm-vibrator bindings, pwm8 is the direction pin, and pwm9 is the enable pin. The pwms on the vibrator node has these two values swapped so this patch corrects it. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
67 lines
1.8 KiB
Plaintext
67 lines
1.8 KiB
Plaintext
* PWM vibrator device tree bindings
|
|
|
|
Registers a PWM device as vibrator. It is expected, that the vibrator's
|
|
strength increases based on the duty cycle of the enable PWM channel
|
|
(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
|
|
|
|
The binding supports an optional direction PWM channel, that can be
|
|
driven at fixed duty cycle. If available this is can be used to increase
|
|
the vibration effect of some devices.
|
|
|
|
Required properties:
|
|
- compatible: should contain "pwm-vibrator"
|
|
- pwm-names: Should contain "enable" and optionally "direction"
|
|
- pwms: Should contain a PWM handle for each entry in pwm-names
|
|
|
|
Optional properties:
|
|
- vcc-supply: Phandle for the regulator supplying power
|
|
- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
|
|
nanoseconds, defaults to 50% of the channel's
|
|
period.
|
|
|
|
Example from Motorola Droid 4:
|
|
|
|
&omap4_pmx_core {
|
|
vibrator_direction_pin: pinmux_vibrator_direction_pin {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
|
|
>;
|
|
};
|
|
|
|
vibrator_enable_pin: pinmux_vibrator_enable_pin {
|
|
pinctrl-single,pins = <
|
|
OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
|
|
>;
|
|
};
|
|
};
|
|
|
|
/ {
|
|
pwm8: dmtimer-pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vibrator_direction_pin>;
|
|
|
|
compatible = "ti,omap-dmtimer-pwm";
|
|
#pwm-cells = <3>;
|
|
ti,timers = <&timer8>;
|
|
ti,clock-source = <0x01>;
|
|
};
|
|
|
|
pwm9: dmtimer-pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vibrator_enable_pin>;
|
|
|
|
compatible = "ti,omap-dmtimer-pwm";
|
|
#pwm-cells = <3>;
|
|
ti,timers = <&timer9>;
|
|
ti,clock-source = <0x01>;
|
|
};
|
|
|
|
vibrator {
|
|
compatible = "pwm-vibrator";
|
|
pwms = <&pwm9 0 1000000000 0>,
|
|
<&pwm8 0 1000000000 0>;
|
|
pwm-names = "enable", "direction";
|
|
direction-duty-cycle-ns = <1000000000>;
|
|
};
|
|
};
|