linux_dsm_epyc7002/drivers/net/wireless/iwlwifi/iwl-power.c
Don Fry 26bfc0cfdb iwlagn: eliminate bus pointer from iwl_priv structure
A pointer to the bus structure is still in iwl_priv.  Finish
cleanup and remove it.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14 14:48:10 -04:00

446 lines
14 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-agn.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-power.h"
#include "iwl-trans.h"
#include "iwl-shared.h"
/*
* Setting power level allows the card to go to sleep when not busy.
*
* We calculate a sleep command based on the required latency, which
* we get from mac80211. In order to handle thermal throttling, we can
* also use pre-defined power levels.
*/
/*
* This defines the old power levels. They are still used by default
* (level 1) and for thermal throttle (levels 3 through 5)
*/
struct iwl_power_vec_entry {
struct iwl_powertable_cmd cmd;
u8 no_dtim; /* number of skip dtim */
};
#define IWL_DTIM_RANGE_0_MAX 2
#define IWL_DTIM_RANGE_1_MAX 10
#define NOSLP cpu_to_le16(0), 0, 0
#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
#define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK | \
IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \
IWL_POWER_ADVANCE_PM_ENA_MSK)
#define ASLP_TOUT(T) cpu_to_le32(T)
#define TU_TO_USEC 1024
#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
cpu_to_le32(X1), \
cpu_to_le32(X2), \
cpu_to_le32(X3), \
cpu_to_le32(X4)}
/* default power management (not Tx power) table values */
/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
/* DTIM 0 - 2 */
static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
};
/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
/* DTIM 3 - 10 */
static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
};
/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
/* DTIM 11 - */
static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
};
/* advance power management */
/* DTIM 0 - 2 */
static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
};
/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
/* DTIM 3 - 10 */
static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
};
/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
/* DTIM 11 - */
static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
};
static void iwl_static_sleep_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd,
enum iwl_power_level lvl, int period)
{
const struct iwl_power_vec_entry *table;
int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
int i;
u8 skip;
u32 slp_itrvl;
if (priv->cfg->adv_pm) {
table = apm_range_2;
if (period <= IWL_DTIM_RANGE_1_MAX)
table = apm_range_1;
if (period <= IWL_DTIM_RANGE_0_MAX)
table = apm_range_0;
} else {
table = range_2;
if (period <= IWL_DTIM_RANGE_1_MAX)
table = range_1;
if (period <= IWL_DTIM_RANGE_0_MAX)
table = range_0;
}
if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM))
memset(cmd, 0, sizeof(*cmd));
else
*cmd = table[lvl].cmd;
if (period == 0) {
skip = 0;
period = 1;
for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
max_sleep[i] = 1;
} else {
skip = table[lvl].no_dtim;
for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
}
slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
/* figure out the listen interval based on dtim period and skip */
if (slp_itrvl == 0xFF)
cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
cpu_to_le32(period * (skip + 1));
slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
if (slp_itrvl > period)
cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
cpu_to_le32((slp_itrvl / period) * period);
if (skip)
cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
else
cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
if (hw_params(priv).shadow_reg_enable)
cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
else
cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
if (iwl_advanced_bt_coexist(priv)) {
if (!priv->cfg->bt_params->bt_sco_disable)
cmd->flags |= IWL_POWER_BT_SCO_ENA;
else
cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
}
slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
/* enforce max sleep interval */
for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
if (le32_to_cpu(cmd->sleep_interval[i]) >
(max_sleep[i] * period))
cmd->sleep_interval[i] =
cpu_to_le32(max_sleep[i] * period);
if (i != (IWL_POWER_VEC_SIZE - 1)) {
if (le32_to_cpu(cmd->sleep_interval[i]) >
le32_to_cpu(cmd->sleep_interval[i+1]))
cmd->sleep_interval[i] =
cmd->sleep_interval[i+1];
}
}
if (priv->power_data.bus_pm)
cmd->flags |= IWL_POWER_PCI_PM_MSK;
else
cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
skip, period);
IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
}
static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd)
{
memset(cmd, 0, sizeof(*cmd));
if (priv->power_data.bus_pm)
cmd->flags |= IWL_POWER_PCI_PM_MSK;
IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
}
static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd,
int dynps_ms, int wakeup_period)
{
/*
* These are the original power level 3 sleep successions. The
* device may behave better with such succession and was also
* only tested with that. Just like the original sleep commands,
* also adjust the succession here to the wakeup_period below.
* The ranges are the same as for the sleep commands, 0-2, 3-9
* and >10, which is selected based on the DTIM interval for
* the sleep index but here we use the wakeup period since that
* is what we need to do for the latency requirements.
*/
static const u8 slp_succ_r0[IWL_POWER_VEC_SIZE] = { 2, 2, 2, 2, 2 };
static const u8 slp_succ_r1[IWL_POWER_VEC_SIZE] = { 2, 4, 6, 7, 9 };
static const u8 slp_succ_r2[IWL_POWER_VEC_SIZE] = { 2, 7, 9, 9, 0xFF };
const u8 *slp_succ = slp_succ_r0;
int i;
if (wakeup_period > IWL_DTIM_RANGE_0_MAX)
slp_succ = slp_succ_r1;
if (wakeup_period > IWL_DTIM_RANGE_1_MAX)
slp_succ = slp_succ_r2;
memset(cmd, 0, sizeof(*cmd));
cmd->flags = IWL_POWER_DRIVER_ALLOW_SLEEP_MSK |
IWL_POWER_FAST_PD; /* no use seeing frames for others */
if (priv->power_data.bus_pm)
cmd->flags |= IWL_POWER_PCI_PM_MSK;
if (hw_params(priv).shadow_reg_enable)
cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
else
cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
if (iwl_advanced_bt_coexist(priv)) {
if (!priv->cfg->bt_params->bt_sco_disable)
cmd->flags |= IWL_POWER_BT_SCO_ENA;
else
cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
}
cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms);
cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms);
for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
cmd->sleep_interval[i] =
cpu_to_le32(min_t(int, slp_succ[i], wakeup_period));
IWL_DEBUG_POWER(priv, "Automatic sleep command\n");
}
static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
{
IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
le32_to_cpu(cmd->sleep_interval[0]),
le32_to_cpu(cmd->sleep_interval[1]),
le32_to_cpu(cmd->sleep_interval[2]),
le32_to_cpu(cmd->sleep_interval[3]),
le32_to_cpu(cmd->sleep_interval[4]));
return iwl_trans_send_cmd_pdu(trans(priv), POWER_TABLE_CMD, CMD_SYNC,
sizeof(struct iwl_powertable_cmd), cmd);
}
static void iwl_power_build_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd)
{
bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
int dtimper;
dtimper = priv->hw->conf.ps_dtim_period ?: 1;
if (priv->shrd->wowlan)
iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
else if (!priv->cfg->base_params->no_idle_support &&
priv->hw->conf.flags & IEEE80211_CONF_IDLE)
iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
else if (iwl_tt_is_low_power_state(priv)) {
/* in thermal throttling low power state */
iwl_static_sleep_cmd(priv, cmd,
iwl_tt_current_power_mode(priv), dtimper);
} else if (!enabled)
iwl_power_sleep_cam_cmd(priv, cmd);
else if (priv->power_data.debug_sleep_level_override >= 0)
iwl_static_sleep_cmd(priv, cmd,
priv->power_data.debug_sleep_level_override,
dtimper);
else if (iwlagn_mod_params.no_sleep_autoadjust) {
if (iwlagn_mod_params.power_level > IWL_POWER_INDEX_1 &&
iwlagn_mod_params.power_level <= IWL_POWER_INDEX_5)
iwl_static_sleep_cmd(priv, cmd,
iwlagn_mod_params.power_level, dtimper);
else
iwl_static_sleep_cmd(priv, cmd,
IWL_POWER_INDEX_1, dtimper);
} else
iwl_power_fill_sleep_cmd(priv, cmd,
priv->hw->conf.dynamic_ps_timeout,
priv->hw->conf.max_sleep_period);
}
int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
bool force)
{
int ret;
bool update_chains;
lockdep_assert_held(&priv->shrd->mutex);
/* Don't update the RX chain when chain noise calibration is running */
update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
return 0;
if (!iwl_is_ready_rf(priv->shrd))
return -EIO;
/* scan complete use sleep_power_next, need to be updated */
memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
if (test_bit(STATUS_SCANNING, &priv->shrd->status) && !force) {
IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
return 0;
}
if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
set_bit(STATUS_POWER_PMI, &priv->shrd->status);
ret = iwl_set_power(priv, cmd);
if (!ret) {
if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
clear_bit(STATUS_POWER_PMI, &priv->shrd->status);
if (update_chains)
iwl_update_chain_flags(priv);
else
IWL_DEBUG_POWER(priv,
"Cannot update the power, chain noise "
"calibration running: %d\n",
priv->chain_noise_data.state);
memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
} else
IWL_ERR(priv, "set power fail, ret = %d", ret);
return ret;
}
int iwl_power_update_mode(struct iwl_priv *priv, bool force)
{
struct iwl_powertable_cmd cmd;
iwl_power_build_cmd(priv, &cmd);
return iwl_power_set_mode(priv, &cmd, force);
}
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
priv->power_data.bus_pm = bus_get_pm_support(bus(priv));
priv->power_data.debug_sleep_level_override = -1;
memset(&priv->power_data.sleep_cmd, 0,
sizeof(priv->power_data.sleep_cmd));
}