mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-27 00:30:57 +07:00
8c3166f5d7
This patch adds i2c pinctrl DT node for IFC6410 board. It also adds necessary DT support for i2c eeprom which is present on IFC6410. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
354 lines
8.0 KiB
Plaintext
354 lines
8.0 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
|
|
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
model = "Qualcomm APQ8064";
|
|
compatible = "qcom,apq8064";
|
|
interrupt-parent = <&intc>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc0>;
|
|
qcom,saw = <&saw0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc1>;
|
|
qcom,saw = <&saw1>;
|
|
};
|
|
|
|
cpu@2 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc2>;
|
|
qcom,saw = <&saw2>;
|
|
};
|
|
|
|
cpu@3 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc3>;
|
|
qcom,saw = <&saw3>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,krait-pmu";
|
|
interrupts = <1 10 0x304>;
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
tlmm_pinmux: pinctrl@800000 {
|
|
compatible = "qcom,apq8064-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ps_hold>;
|
|
|
|
sdc4_gpios: sdc4-gpios {
|
|
pios {
|
|
pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
|
|
function = "sdc4";
|
|
};
|
|
};
|
|
|
|
ps_hold: ps_hold {
|
|
mux {
|
|
pins = "gpio78";
|
|
function = "ps_hold";
|
|
};
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@2000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x02000000 0x1000>,
|
|
<0x02002000 0x1000>;
|
|
};
|
|
|
|
timer@200a000 {
|
|
compatible = "qcom,kpss-timer", "qcom,msm-timer";
|
|
interrupts = <1 1 0x301>,
|
|
<1 2 0x301>,
|
|
<1 3 0x301>;
|
|
reg = <0x0200a000 0x100>;
|
|
clock-frequency = <27000000>,
|
|
<32768>;
|
|
cpu-offset = <0x80000>;
|
|
};
|
|
|
|
acc0: clock-controller@2088000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc1: clock-controller@2098000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc2: clock-controller@20a8000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc3: clock-controller@20b8000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
saw0: regulator@2089000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw1: regulator@2099000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw2: regulator@20a9000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw3: regulator@20b9000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
gsbi1: gsbi@12440000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
reg = <0x12440000 0x100>;
|
|
clocks = <&gcc GSBI1_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
i2c1: i2c@12460000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x12460000 0x1000>;
|
|
interrupts = <0 194 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gsbi2: gsbi@12480000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
reg = <0x12480000 0x100>;
|
|
clocks = <&gcc GSBI2_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
i2c2: i2c@124a0000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x124a0000 0x1000>;
|
|
interrupts = <0 196 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gsbi7: gsbi@16600000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
reg = <0x16600000 0x100>;
|
|
clocks = <&gcc GSBI7_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
serial@16640000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16640000 0x1000>,
|
|
<0x16600000 0x1000>;
|
|
interrupts = <0 158 0x0>;
|
|
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
qcom,ssbi@500000 {
|
|
compatible = "qcom,ssbi";
|
|
reg = <0x00500000 0x1000>;
|
|
qcom,controller-type = "pmic-arbiter";
|
|
};
|
|
|
|
gcc: clock-controller@900000 {
|
|
compatible = "qcom,gcc-apq8064";
|
|
reg = <0x00900000 0x4000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
mmcc: clock-controller@4000000 {
|
|
compatible = "qcom,mmcc-apq8064";
|
|
reg = <0x4000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
/* Temporary fixed regulator */
|
|
vsdcc_fixed: vsdcc-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "SDCC Power";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sdcc1bam:dma@12402000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x12402000 0x8000>;
|
|
interrupts = <0 98 0>;
|
|
clocks = <&gcc SDC1_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
sdcc3bam:dma@12182000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x12182000 0x8000>;
|
|
interrupts = <0 96 0>;
|
|
clocks = <&gcc SDC3_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
sdcc4bam:dma@121c2000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x121c2000 0x8000>;
|
|
interrupts = <0 95 0>;
|
|
clocks = <&gcc SDC4_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
amba {
|
|
compatible = "arm,amba-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
sdcc1: sdcc@12400000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12400000 0x2000>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <96000000>;
|
|
non-removable;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
vmmc-supply = <&vsdcc_fixed>;
|
|
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
sdcc3: sdcc@12180000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12180000 0x2000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <192000000>;
|
|
no-1-8-v;
|
|
vmmc-supply = <&vsdcc_fixed>;
|
|
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
sdcc4: sdcc@121c0000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x121c0000 0x2000>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
vmmc-supply = <&vsdcc_fixed>;
|
|
vqmmc-supply = <&vsdcc_fixed>;
|
|
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdc4_gpios>;
|
|
};
|
|
};
|
|
};
|
|
};
|