AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-24 05:47:57 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
b433cdc7f0
linux_dsm_epyc7002/arch/arm/kernel/iwmmxt.S
Russell King 1abd350237 ARM: align .data section 
Robert Jarzmik reports that his PXA25x system fails to boot with 4.12,
failing at __flush_whole_cache in arch/arm/mm/proc-xscale.S:215:

   0xc0019e20 <+0>:     ldr     r1, [pc, #788]
   0xc0019e24 <+4>:     ldr     r0, [r1]	<== here

with r1 containing 0xc06f82cd, which is the address of "clean_addr".
Examination of the System.map shows:

c06f22c8 D user_pmd_table
c06f22cc d __warned.19178
c06f22cd d clean_addr

indicating that a .data.unlikely section has appeared just before the
.data section from proc-xscale.S.  According to objdump -h, it appears
that our assembly files default their .data alignment to 2**0, which
is bad news if the preceding .data section size is not power-of-2
aligned at link time.

Add the appropriate .align directives to all assembly files in arch/arm
that are missing them where we require an appropriate alignment.

Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-08-14 16:22:55 +01:00

374 lines
8.5 KiB
ArmAsm
Raw Blame History

/*
* linux/arch/arm/kernel/iwmmxt.S
*
* XScale iWMMXt (Concan) context switching and handling
*
* Initial code:
* Copyright (c) 2003, Intel Corporation
*
* Full lazy switching support, optimizations and more, by Nicolas Pitre
* Copyright (c) 2003-2004, MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/assembler.h>
#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
#define PJ4(code...) code
#define XSC(code...)
#elif defined(CONFIG_CPU_MOHAWK) || \
defined(CONFIG_CPU_XSC3) || \
defined(CONFIG_CPU_XSCALE)
#define PJ4(code...)
#define XSC(code...) code
#else
#error "Unsupported iWMMXt architecture"
#endif
#define MMX_WR0 (0x00)
#define MMX_WR1 (0x08)
#define MMX_WR2 (0x10)
#define MMX_WR3 (0x18)
#define MMX_WR4 (0x20)
#define MMX_WR5 (0x28)
#define MMX_WR6 (0x30)
#define MMX_WR7 (0x38)
#define MMX_WR8 (0x40)
#define MMX_WR9 (0x48)
#define MMX_WR10 (0x50)
#define MMX_WR11 (0x58)
#define MMX_WR12 (0x60)
#define MMX_WR13 (0x68)
#define MMX_WR14 (0x70)
#define MMX_WR15 (0x78)
#define MMX_WCSSF (0x80)
#define MMX_WCASF (0x84)
#define MMX_WCGR0 (0x88)
#define MMX_WCGR1 (0x8C)
#define MMX_WCGR2 (0x90)
#define MMX_WCGR3 (0x94)
#define MMX_SIZE (0x98)
.text
.arm
/*
* Lazy switching of Concan coprocessor context
*
* r10 = struct thread_info pointer
* r9 = ret_from_exception
* lr = undefined instr exit
*
* called from prefetch exception handler with interrupts enabled
*/
ENTRY(iwmmxt_task_enable)
inc_preempt_count r10, r3
XSC(mrc p15, 0, r2, c15, c1, 0)
PJ4(mrc p15, 0, r2, c1, c0, 2)
@ CP0 and CP1 accessible?
XSC(tst r2, #0x3)
PJ4(tst r2, #0xf)
bne 4f @ if so no business here
@ enable access to CP0 and CP1
XSC(orr r2, r2, #0x3)
XSC(mcr p15, 0, r2, c15, c1, 0)
PJ4(orr r2, r2, #0xf)
PJ4(mcr p15, 0, r2, c1, c0, 2)
ldr r3, =concan_owner
add r0, r10, #TI_IWMMXT_STATE @ get task Concan save area
ldr r2, [sp, #60] @ current task pc value
ldr r1, [r3] @ get current Concan owner
str r0, [r3] @ this task now owns Concan regs
sub r2, r2, #4 @ adjust pc back
str r2, [sp, #60]
mrc p15, 0, r2, c2, c0, 0
mov r2, r2 @ cpwait
bl concan_save
#ifdef CONFIG_PREEMPT_COUNT
get_thread_info r10
#endif
4: dec_preempt_count r10, r3
ret r9 @ normal exit from exception
concan_save:
teq r1, #0 @ test for last ownership
beq concan_load @ no owner, skip save
tmrc r2, wCon
@ CUP? wCx
tst r2, #0x1
beq 1f
concan_dump:
wstrw wCSSF, [r1, #MMX_WCSSF]
wstrw wCASF, [r1, #MMX_WCASF]
wstrw wCGR0, [r1, #MMX_WCGR0]
wstrw wCGR1, [r1, #MMX_WCGR1]
wstrw wCGR2, [r1, #MMX_WCGR2]
wstrw wCGR3, [r1, #MMX_WCGR3]
1: @ MUP? wRn
tst r2, #0x2
beq 2f
wstrd wR0, [r1, #MMX_WR0]
wstrd wR1, [r1, #MMX_WR1]
wstrd wR2, [r1, #MMX_WR2]
wstrd wR3, [r1, #MMX_WR3]
wstrd wR4, [r1, #MMX_WR4]
wstrd wR5, [r1, #MMX_WR5]
wstrd wR6, [r1, #MMX_WR6]
wstrd wR7, [r1, #MMX_WR7]
wstrd wR8, [r1, #MMX_WR8]
wstrd wR9, [r1, #MMX_WR9]
wstrd wR10, [r1, #MMX_WR10]
wstrd wR11, [r1, #MMX_WR11]
wstrd wR12, [r1, #MMX_WR12]
wstrd wR13, [r1, #MMX_WR13]
wstrd wR14, [r1, #MMX_WR14]
wstrd wR15, [r1, #MMX_WR15]
2: teq r0, #0 @ anything to load?
reteq lr @ if not, return
concan_load:
@ Load wRn
wldrd wR0, [r0, #MMX_WR0]
wldrd wR1, [r0, #MMX_WR1]
wldrd wR2, [r0, #MMX_WR2]
wldrd wR3, [r0, #MMX_WR3]
wldrd wR4, [r0, #MMX_WR4]
wldrd wR5, [r0, #MMX_WR5]
wldrd wR6, [r0, #MMX_WR6]
wldrd wR7, [r0, #MMX_WR7]
wldrd wR8, [r0, #MMX_WR8]
wldrd wR9, [r0, #MMX_WR9]
wldrd wR10, [r0, #MMX_WR10]
wldrd wR11, [r0, #MMX_WR11]
wldrd wR12, [r0, #MMX_WR12]
wldrd wR13, [r0, #MMX_WR13]
wldrd wR14, [r0, #MMX_WR14]
wldrd wR15, [r0, #MMX_WR15]
@ Load wCx
wldrw wCSSF, [r0, #MMX_WCSSF]
wldrw wCASF, [r0, #MMX_WCASF]
wldrw wCGR0, [r0, #MMX_WCGR0]
wldrw wCGR1, [r0, #MMX_WCGR1]
wldrw wCGR2, [r0, #MMX_WCGR2]
wldrw wCGR3, [r0, #MMX_WCGR3]
@ clear CUP/MUP (only if r1 != 0)
teq r1, #0
mov r2, #0
reteq lr
tmcr wCon, r2
ret lr
ENDPROC(iwmmxt_task_enable)
/*
* Back up Concan regs to save area and disable access to them
* (mainly for gdb or sleep mode usage)
*
* r0 = struct thread_info pointer of target task or NULL for any
*/
ENTRY(iwmmxt_task_disable)
stmfd sp!, {r4, lr}
mrs ip, cpsr
orr r2, ip, #PSR_I_BIT @ disable interrupts
msr cpsr_c, r2
ldr r3, =concan_owner
add r2, r0, #TI_IWMMXT_STATE @ get task Concan save area
ldr r1, [r3] @ get current Concan owner
teq r1, #0 @ any current owner?
beq 1f @ no: quit
teq r0, #0 @ any owner?
teqne r1, r2 @ or specified one?
bne 1f @ no: quit
@ enable access to CP0 and CP1
XSC(mrc p15, 0, r4, c15, c1, 0)
XSC(orr r4, r4, #0x3)
XSC(mcr p15, 0, r4, c15, c1, 0)
PJ4(mrc p15, 0, r4, c1, c0, 2)
PJ4(orr r4, r4, #0xf)
PJ4(mcr p15, 0, r4, c1, c0, 2)
mov r0, #0 @ nothing to load
str r0, [r3] @ no more current owner
mrc p15, 0, r2, c2, c0, 0
mov r2, r2 @ cpwait
bl concan_save
@ disable access to CP0 and CP1
XSC(bic r4, r4, #0x3)
XSC(mcr p15, 0, r4, c15, c1, 0)
PJ4(bic r4, r4, #0xf)
PJ4(mcr p15, 0, r4, c1, c0, 2)
mrc p15, 0, r2, c2, c0, 0
mov r2, r2 @ cpwait
1: msr cpsr_c, ip @ restore interrupt mode
ldmfd sp!, {r4, pc}
ENDPROC(iwmmxt_task_disable)
/*
* Copy Concan state to given memory address
*
* r0 = struct thread_info pointer of target task
* r1 = memory address where to store Concan state
*
* this is called mainly in the creation of signal stack frames
*/
ENTRY(iwmmxt_task_copy)
mrs ip, cpsr
orr r2, ip, #PSR_I_BIT @ disable interrupts
msr cpsr_c, r2
ldr r3, =concan_owner
add r2, r0, #TI_IWMMXT_STATE @ get task Concan save area
ldr r3, [r3] @ get current Concan owner
teq r2, r3 @ does this task own it...
beq 1f
@ current Concan values are in the task save area
msr cpsr_c, ip @ restore interrupt mode
mov r0, r1
mov r1, r2
mov r2, #MMX_SIZE
b memcpy
1: @ this task owns Concan regs -- grab a copy from there
mov r0, #0 @ nothing to load
mov r2, #3 @ save all regs
mov r3, lr @ preserve return address
bl concan_dump
msr cpsr_c, ip @ restore interrupt mode
ret r3
ENDPROC(iwmmxt_task_copy)
/*
* Restore Concan state from given memory address
*
* r0 = struct thread_info pointer of target task
* r1 = memory address where to get Concan state from
*
* this is used to restore Concan state when unwinding a signal stack frame
*/
ENTRY(iwmmxt_task_restore)
mrs ip, cpsr
orr r2, ip, #PSR_I_BIT @ disable interrupts
msr cpsr_c, r2
ldr r3, =concan_owner
add r2, r0, #TI_IWMMXT_STATE @ get task Concan save area
ldr r3, [r3] @ get current Concan owner
bic r2, r2, #0x7 @ 64-bit alignment
teq r2, r3 @ does this task own it...
beq 1f
@ this task doesn't own Concan regs -- use its save area
msr cpsr_c, ip @ restore interrupt mode
mov r0, r2
mov r2, #MMX_SIZE
b memcpy
1: @ this task owns Concan regs -- load them directly
mov r0, r1
mov r1, #0 @ don't clear CUP/MUP
mov r3, lr @ preserve return address
bl concan_load
msr cpsr_c, ip @ restore interrupt mode
ret r3
ENDPROC(iwmmxt_task_restore)
/*
* Concan handling on task switch
*
* r0 = next thread_info pointer
*
* Called only from the iwmmxt notifier with task preemption disabled.
*/
ENTRY(iwmmxt_task_switch)
XSC(mrc p15, 0, r1, c15, c1, 0)
PJ4(mrc p15, 0, r1, c1, c0, 2)
@ CP0 and CP1 accessible?
XSC(tst r1, #0x3)
PJ4(tst r1, #0xf)
bne 1f @ yes: block them for next task
ldr r2, =concan_owner
add r3, r0, #TI_IWMMXT_STATE @ get next task Concan save area
ldr r2, [r2] @ get current Concan owner
teq r2, r3 @ next task owns it?
retne lr @ no: leave Concan disabled
1: @ flip Concan access
XSC(eor r1, r1, #0x3)
XSC(mcr p15, 0, r1, c15, c1, 0)
PJ4(eor r1, r1, #0xf)
PJ4(mcr p15, 0, r1, c1, c0, 2)
mrc p15, 0, r1, c2, c0, 0
sub pc, lr, r1, lsr #32 @ cpwait and return
ENDPROC(iwmmxt_task_switch)
/*
* Remove Concan ownership of given task
*
* r0 = struct thread_info pointer
*/
ENTRY(iwmmxt_task_release)
mrs r2, cpsr
orr ip, r2, #PSR_I_BIT @ disable interrupts
msr cpsr_c, ip
ldr r3, =concan_owner
add r0, r0, #TI_IWMMXT_STATE @ get task Concan save area
ldr r1, [r3] @ get current Concan owner
eors r0, r0, r1 @ if equal...
streq r0, [r3] @ then clear ownership
msr cpsr_c, r2 @ restore interrupts
ret lr
ENDPROC(iwmmxt_task_release)
.data
.align 2
concan_owner:
.word 0
Reference in New Issue View Git Blame Copy Permalink